I'm not expert in elc. circuits, maybe I am making a very simple mistake or missing some basic points with my circuit.

What I'm trying to achive is simple, to run 2 dc motors with an ultrasonic sensor to detect obstacles and change direction. When I plugged off the ultrasonic sensor everything is working fine as expected without obstacle detection but when I connect the ultrasonic sensor, sensor always responds with 0 cm distance. Then I removed 9v battery from the circuit and plug Arduio to computer via usb, sensor works fine but motors are not working properly, it looks like the power from usb is not enough to drive motors at the same time. I've added my circuit scheme below.

Any help or advice appraciated, Regards,

I'm not expert in electrical circuits, maybe I am making a very simple mistake or missing some basic points with my circuit.

What I'm trying to achieve is simple, to run 2 DC motors with an ultrasonic sensor to detect obstacles and change direction. When I unplug the ultrasonic sensor everything is working fine as expected without obstacle detection but when I connect the ultrasonic sensor, sensor always responds with 0 cm distance. Then I removed 9 V battery from the circuit and plug Arduino to computer via USB, sensor works fine but motors are not working properly, it looks like the power from USB is not enough to drive motors at the same time. I've added my circuit scheme below: