| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If you have ever initialized a submodule, open_submodule will open it.
If you then delete the submodule's worktree directory (but don't
remove it from .gitmodules), git diff --submodule=diff would error out
as it attempted to chdir into the now-deleted working tree directory.
This only matters if the submodules git dir is absorbed. If not, then
we no longer have anywhere to run the diff. But that case does not
trigger this error, because in that case, open_submodule fails, so we
don't resolve a left commit, so we exit early, which is the only thing
we could do.
If absorbed, then we can run the diff from the submodule's absorbed
git dir (.git/modules/sm2). In practice, that's a bit more
complicated, because `git diff` expects to be run from inside a
working directory, not a git dir. So it looks in the config for
core.worktree, and does chdir("../../../sm2"), which is the very dir
that we're trying to avoid visiting because it's been deleted. We
work around this by setting GIT_WORK_TREE (and GIT_DIR) to ".". It is
little weird to set GIT_WORK_TREE to something that is not a working
tree just to avoid an unnecessary chdir, but it works.
Signed-off-by: David Turner <dturner@twosigma.com
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Bring the "commit-graph" command in line with the error output and
general pattern in cmd_multi_pack_index().
Let's test for that output, and also cover the same potential bug as
was fixed in the multi-pack-index command in
88617d11f9d (multi-pack-index: fix potential segfault without
sub-command, 2021-07-19).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the parse_options() invocation in the commit-graph code to
error on unknown leftover argv elements, in addition to the existing
and implicit erroring via parse_options() on unknown options.
We'd already error in cmd_commit_graph() on e.g.:
git commit-graph unknown verify
git commit-graph --unknown verify
But here we're calling parse_options() twice more for the "write" and
"verify" subcommands. We did not do the same checking for leftover
argv elements there. As a result we'd silently accept garbage in these
subcommands, let's not do that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rather than guarding all of the !argc with an additional "if" arm
let's do an early goto to "usage". This also makes it clear that
"save_commit_buffer" is not needed in this case.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor the "goto usage" pattern added in
cd57bc41bbc (builtin/multi-pack-index.c: display usage on unrecognized
command, 2021-03-30) and 88617d11f9d (multi-pack-index: fix potential
segfault without sub-command, 2021-07-19) to maintain the same
brevity, but in a form that doesn't run afoul of the recommendation in
CodingGuidelines about braces:
When there are multiple arms to a conditional and some of them
require braces, enclose even a single line block in braces for
consistency[...]
Let's also change "argv == 0" to juts "!argv", per:
Do not explicitly compare an integral value with constant 0 or
'\0', or a pointer value with constant NULL[...]
I'm changing this because in a subsequent commit I'll make
builtin/commit-graph.c use the same pattern, having the two similarly
structured commands match aids readability.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make use of the parse_options_concat() so we don't need to copy/paste
common options like --object-dir.
This is inspired by a similar change to "checkout" in 2087182272
(checkout: split options[] array in three pieces, 2019-03-29), and the
same pattern in the multi-pack-index command, see
60ca94769ce (builtin/multi-pack-index.c: split sub-commands,
2021-03-30).
A minor behavior change here is that now we're going to list both
--object-dir and --progress first, before we'd list --progress along
with other options.
Co-authored-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we don't handle the -h option here like most parse_options() users
we'll fall through and it'll do the right thing for us.
I think this code added in 4ce58ee38d (commit-graph: create
git-commit-graph builtin, 2018-04-02) was always redundant,
parse_options() did this at the time, and the commit-graph code never
used PARSE_OPT_NO_INTERNAL_HELP.
We don't need a test for this, it's tested by the t0012-help.sh test
added in d691551192a (t0012: test "-h" with builtins, 2017-05-30).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Share the usage message between these three variables by using a
macro. Before this new options needed to copy/paste the usage
information, see e.g. 809e0327f5 (builtin/commit-graph.c: introduce
'--max-new-filters=<n>', 2020-09-18).
See b25b727494f (builtin/multi-pack-index.c: define common usage with
a macro, 2021-03-30) for another use of this pattern (but on-list this
one came first).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Silently skipping commits when rebasing with --no-reapply-cherry-picks
(currently the default behavior) can cause user confusion. Issue
warnings when this happens, as well as advice on how to preserve the
skipped commits.
These warnings and advice are displayed only when using the (default)
"merge" rebase backend.
Update the git-rebase docs to mention the warnings and advice.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The most significant of this batch is of course "merge -sort".
Thanks, Elijah and everybody who helped the topic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update FreeBSD CI job
* cb/ci-freebsd-update:
ci: update freebsd 12 cirrus job
|
|
Meh.
* tl/traverse-non-commits-rename:
list-objects.c: rename "traverse_trees_and_blobs" to "traverse_non_commits"
|
|
The current implementation of GIT_TEST_FAIL_PREREQS is broken in
that checking for the lack of a prerequisite would not work. Avoid
the use of "if ! test_have_prereq X" in a test script.
* bc/t5607-avoid-broken-test-fail-prereqs:
t5607: avoid using prerequisites to select algorithm
|
|
The userdiff pattern for "java" language has been updated.
* th/userdiff-more-java:
userdiff: improve java hunk header regex
|
|
"git range-diff" code clean-up.
* jk/range-diff-fixes:
range-diff: use ssize_t for parsed "len" in read_patches()
range-diff: handle unterminated lines in read_patches()
range-diff: drop useless "offset" variable from read_patches()
|
|
"git apply" miscounted the bytes and failed to read to the end of
binary hunks.
* jk/apply-binary-hunk-parsing-fix:
apply: keep buffer/size pair in sync when parsing binary hunks
|
|
Remind developers that the userdiff patterns should be kept simple
and permissive, assuming that the contents they apply are always
syntactically correct.
* jc/userdiff-pattern-hint:
userdiff: comment on the builtin patterns
|
|
Code clean-up.
* cb/builtin-merge-format-string-fix:
builtin/merge: avoid -Wformat-extra-args from ancient Xcode
|
|
Debugging aid.
* js/log-protocol-version:
connect, protocol: log negotiated protocol version
|
|
Use `ort` instead of `recursive` as the default merge strategy.
* en/ort-becomes-the-default:
Update docs for change of default merge backend
Change default merge backend from recursive to ort
|
|
Documentation updates.
* en/merge-strategy-docs:
Update error message and code comment
merge-strategies.txt: add coverage of the `ort` merge strategy
git-rebase.txt: correct out-of-date and misleading text about renames
merge-strategies.txt: fix simple capitalization error
merge-strategies.txt: avoid giving special preference to patience algorithm
merge-strategies.txt: do not imply using copy detection is desired
merge-strategies.txt: update wording for the resolve strategy
Documentation: edit awkward references to `git merge-recursive`
directory-rename-detection.txt: small updates due to merge-ort optimizations
git-rebase.txt: correct antiquated claims about --rebase-merges
|
|
"git pull" had various corner cases that were not well thought out
around its --rebase backend, e.g. "git pull --ff-only" did not stop
but went ahead and rebased when the history on other side is not a
descendant of our history. The series tries to fix them up.
* en/pull-conflicting-options:
pull: fix handling of multiple heads
pull: update docs & code for option compatibility with rebasing
pull: abort by default when fast-forwarding is not possible
pull: make --rebase and --no-rebase override pull.ff=only
pull: since --ff-only overrides, handle it first
pull: abort if --ff-only is given and fast-forwarding is impossible
t7601: add tests of interactions with multiple merge heads and config
t7601: test interaction of merge/rebase/fast-forward flags and options
|
|
Based on current experience, when running git clone --recurse-submodules,
developers do not expect other commands such as pull or checkout to run
recursively into active submodules. However, setting submodule.recurse=true
at this step could make for a simpler workflow by eliminating the need for
the --recurse-submodules option in subsequent commands. To collect more
data on developers' preference in regards to making submodule.recurse=true
a default config value in the future, deploy this feature under the opt in
submodule.stickyRecursiveClone flag.
Signed-off-by: Mahi Kolla <mkolla2@illinois.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If multiple independent patches are sent with send-email, even if the
"In-Reply-To" and "References" headers are not managed by --thread or
--in-reply-to, their values may be propagated from prior patches to
subsequent patches with no such headers defined.
To mitigate this and potential future issues, make sure all global
patch-specific variables are always either handled by
command-specific code (e.g. threading), or are reset to their default
values for every iteration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Marvin Häuser <mhaeuser@posteo.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fetching, Git will by default print a list of all updated refs in a
nicely formatted table. In order to come up with this table, Git needs
to iterate refs twice: first to determine the maximum column width, and
a second time to actually format these changed refs.
While this table will not be printed in case the user passes `--quiet`,
we still go out of our way and do all these steps. In fact, we even do
more work compared to not passing `--quiet`: without the flag, we will
skip all references in the column width computation which have not been
updated, but if it is set we will now compute widths for all refs.
Fix this issue by completely skipping both preparation of the format and
formatting data for display in case the user passes `--quiet`, improving
performance especially with many refs. The following benchmark shows a
nice speedup for a quiet mirror-fetch in a repository with 2.3M refs:
Benchmark #1: HEAD~: git-fetch
Time (mean ± σ): 26.929 s ± 0.145 s [User: 24.194 s, System: 4.656 s]
Range (min … max): 26.692 s … 27.068 s 5 runs
Benchmark #2: HEAD: git-fetch
Time (mean ± σ): 25.189 s ± 0.094 s [User: 22.556 s, System: 4.606 s]
Range (min … max): 25.070 s … 25.314 s 5 runs
Summary
'HEAD: git-fetch' ran
1.07 ± 0.01 times faster than 'HEAD~: git-fetch'
While at it, this patch also fixes `adjust_refcol_width()` such that it
skips unchanged refs in case the user passed `--quiet`, where verbosity
will be negative. While this function won't be called anymore if so,
this brings the comment in line with actual code. Furthermore, needless
`verbosity >= 0` checks are now removed in `store_updated_refs()`: we
never print to the `note` buffer anymore in case `verbosity < 0`, so we
won't end up in that code block anyway.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Call fspathcmp() instead of open-coding it. This shortens the code and
makes it less repetitive.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Every once in a while a test somehow manages to escape from its trash
directory and modifies the surrounding repository, whether because of
a bug in git itself, a bug in a test [1], or e.g. when trying to run
tests with a shell that is, in general, unable to run our tests [2].
Set GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY/.." as an additional
safety measure to protect the surrounding repository at least from
modifications by git commands executed in the tests (assuming that
handling of ceiling directories during repository discovery is not
broken, and, of course, it won't save us from regular shell commands,
e.g. 'cd .. && rm -f ...').
[1] e.g. https://public-inbox.org/git/20210423051255.GD2947267@szeder.dev
[2] $ git symbolic-ref HEAD
refs/heads/master
$ ksh ./t2011-checkout-invalid-head.sh
[... a lot of "not ok" ...]
$ git symbolic-ref HEAD
refs/heads/other
(In short: 'ksh' doesn't support the 'local' builtin command,
which is used by 'test_oid', causing it to return with error
whenever it's called, leaving ZERO_OID set to empty, so when the
test 'checkout main from invalid HEAD' runs 'echo $ZERO_OID
>.git/HEAD' it writes a corrupt (not invalid) HEAD, and subsequent
git commands don't recognize the repository in the trash directory
anymore, but operate on the surrounding repo.)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix syntax and correct the format of printf in MyFirstObjectWalk.txt
Signed-off-by: Zoker <kaixuanguiqu@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Copy the 'index_state->dir_hash' back to the real istate after expanding
a sparse index.
A crash was observed in 'git status' during some hashmap lookups with
corrupted hashmap entries. During an index expansion, new cache-entries
are added to the 'index_state->name_hash' and the 'dir_hash' in a
temporary 'index_state' variable 'full'. However, only the 'name_hash'
hashmap from this temp variable was copied back into the real 'istate'
variable. The original copy of the 'dir_hash' was incorrectly
preserved. If the table in the 'full->dir_hash' hashmap were realloced,
the stale version (in 'istate') would be corrupted.
The test suite does not operate on index sizes sufficiently large to
trigger this reallocation, so they do not cover this behavior.
Increasing the test suite to cover such scale is fragile and likely
wasteful.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the original code from 08cdfb1337 (pack-objects --keep-unreachable,
2007-09-16), we add each object to the packing list with type
`obj->type`, where `obj` comes from `lookup_unknown_object()`. Unless we
had already looked up and parsed the object, this will be `OBJ_NONE`.
That's fine, since oe_set_type() sets the type_valid bit to '0', and we
determine the real type later on.
So the only thing we need from the object lookup is access to the
`flags` field so that we can mark that we've added the object with
`OBJECT_ADDED` to avoid adding it again (we can just pass `OBJ_NONE`
directly instead of grabbing it from the object).
But add_object_entry() already rejects duplicates! This has been the
behavior since 7a979d99ba (Thin pack - create packfile with missing
delta base., 2006-02-19), but 08cdfb1337 didn't take advantage of it.
Moreover, to do the OBJECT_ADDED check, we have to do a hash lookup in
`obj_hash`.
So we can drop the lookup_unknown_object() call completely, *and* the
OBJECT_ADDED flag, too, since the spot we're touching here is the only
location that checks it.
In the end, we perform the same number of hash lookups, but with the
added bonus that we don't waste memory allocating an OBJ_NONE object (if
we were traversing, we'd need it eventually, but the whole point of this
code path is not to traverse).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function is used to implement `pack-objects`'s `--keep-unreachable`
option, but can be simplified in a couple of ways:
- add_objects_in_unpacked_packs() iterates over all packs (and then
all packed objects) itself, but could use for_each_packed_object()
instead since the missing flags necessary were added in the previous
commit
- objects are added to an in_pack array which store (off_t, object)
tuples, and then sorted in offset order when we could iterate
objects in offset order.
There is a slight behavior change here: before we would have added
objects in sorted offset order among _all_ packs. Handing objects to
create_object_entry() in pack order for each pack (instead of
feeding objects from all packs simultaneously their offset relative
to different packs) is much more reasonable, if different than how
the code currently works.
- objects in a single pack are iterated in index order and searched
for in order to discover their offsets, which is much less efficient
than using the on-disk reverse index
Simplify the function by addressing each of the above and moving the
core of the loop into a callback function that we then pass to
for_each_packed_object() instead of open-coding the latter function
ourselves.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The next patch will reimplement a function that wants to iterate over
packed objects while ignoring packs which are marked as kept (either
in-core or on-disk).
Teach for_each_packed_object() to ignore all objects from those packs by
adding a new flag for each of the "kept" states that a pack can be in.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are no other API docs in bundle.h, but this is at least a
start. We'll add a parameter to this function in a subsequent commit,
but let's start by documenting it.
The "/**" comment (as opposed to "/*") signifies the start of API
documentation. See [1] and bdfdaa4978d (strbuf.h: integrate
api-strbuf.txt documentation, 2015-01-16) and 6afbbdda333 (strbuf.h:
unify documentation comments beginnings, 2015-01-16) for a discussion
of that convention.
1. https://lore.kernel.org/git/874kbeecfu.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git branch only allows deleting branches that point to valid commits.
Skip that check if --force is given, as the caller is indicating with
it that they know what they are doing and accept the consequences.
This allows deleting dangling branches, which previously had to be
reset to a valid start-point using --force first.
Reported-by: Ulrich Windl <Ulrich.Windl@rz.uni-regensburg.de>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pass the struct object_id on instead of just its hash member.
This is simpler and avoids the need to guess the algorithm.
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Only one of the callers of rev_is_head() provides two hashes to compare.
Move that check there and convert it to struct object_id.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The word "encoding" can mean a lot of things (e.g., base64 or
quoted-printable encoding in emails, HTML entities, URL encoding, and so
on). The documentation for i18n.commitEncoding and i18n.logOutputEncoding
uses the phrase "character encoding" to make this more clear.
Let's use that phrase in other places to make it clear what kind of
encoding we are talking about. This patch covers the gui.encoding
option, as well as the --encoding option for git-log, etc (in this
latter case, I word-smithed the sentence a little at the same time).
That, coupled with the mention of iconv in the --encoding description,
should make this more clear.
The other spot I looked at is the working-tree-encoding section of
gitattributes(5). But it gives specific examples of encodings that I
think make the meaning pretty clear already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user asks for a pretty-printed commit to be converted (either
explicitly with --encoding=foo, or implicitly because the commit is
non-utf8 and we want to convert it), we pass it through iconv(). If that
fails, we fall back to showing the input verbatim, but don't tell the
user that the output may be bogus.
Let's add a warning to do so, along with a mention in the documentation
for --encoding. Two things to note about the implementation:
- we could produce the warning closer to the call to iconv() in
reencode_string_len(), which would let us relay the value of errno.
But this is not actually very helpful. reencode_string_len() does
not know we are operating on a commit, and indeed does not know that
the caller won't produce an error of its own. And the errno values
from iconv() are seldom helpful (iconv_open() only ever produces
EINVAL; perhaps EILSEQ from iconv() might be illuminating, but it
can also return EINVAL for incomplete sequences).
- if the reason for the failure is that the output charset is not
supported, then the user will see this warning for every commit we
try to display. That might be ugly and overwhelming, but on the
other hand it is making it clear that every one of them has not been
converted (and the likely outcome anyway is to re-try the command
with a supported output encoding).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The 'Filtering contents...' progress report from delayed checkout is
displayed even when checkout and clone are invoked with --quiet or
--no-progress. Furthermore, it is displayed unconditionally, without
first checking whether stdout is a tty. Let's fix these issues and also
add some regression tests for the two code paths that currently use
delayed checkout: unpack_trees.c:check_updates() and
builtin/checkout.c:checkout_worktree().
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'git column's '--nl' option can be used to specify a "string to be
printed at the end of each line" (quoting the man page), but this
option and its mandatory argument has been parsed as OPT_INTEGER since
the introduction of the command in 7e29b8254f (Add column layout
skeleton and git-column, 2012-04-21). Consequently, any non-number
argument is rejected by parse-options, and any number other than 0
leads to segfault:
$ printf "%s\n" one two |git column --mode=plain --nl=foo
error: option `nl' expects a numerical value
$ printf "%s\n" one two |git column --mode=plain --nl=42
Segmentation fault (core dumped)
$ printf "%s\n" one two |git column --mode=plain --nl=0
one
two
Parse this option as OPT_STRING.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the initial reference advertisement, the Git server will first
announce all of its references to the client. The logic is handled in
`send_ref()`, which will allocate a new buffer for each refline it is
about to send. This is quite wasteful: instead of allocating a new
buffer each time, we can just reuse a buffer.
Improve this by passing in a buffer via the `ls_refs_data` struct which
is then reused on each reference.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add and apply a semantic patch for using xopen() instead of calling
open(2) and die() or die_errno() explicitly. This makes the error
messages more consistent and shortens the code.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the flags O_CREAT and O_EXCL are both given then open(2) is supposed
to create the file and error out if it already exists. The error
message in that case looks like this:
fatal: could not open 'foo' for writing: File exists
Without further context this is confusing: Why should the existence of
the file pose a problem? Isn't that a requirement for writing to it?
Add a more specific error message for that case to tell the user that we
actually don't expect the file to preexist, so the example becomes:
fatal: unable to create 'foo': File exists
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the squashing of the advice.graftFileDeprecated advice over to an
external variable in commit.[ch], allowing advice() to purely use the
new-style API of invoking advice() with an enum.
See 8821e90a09a (advice: don't pointlessly suggest
--convert-graft-file, 2018-11-27) for why quieting this advice was
needed. It's more straightforward to move this code to commit.[ch] and
use it builtin/replace.c, than to go through the indirection of
advice.[ch].
Because this was the last advice_config variable we can remove that
old facility from advice.c.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The external use of this variable was added in 532139940c9 (add: warn
when adding an embedded repository, 2017-06-14). For the use-case it's
more straightforward to track whether we've shown advice in
check_embedded_repo() than setting the global variable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In c4a09cc9ccb (Merge branch 'hw/advise-ng', 2020-03-25), a new API for
accessing advice variables was introduced and deprecated `advice_config`
in favor of a new array, `advice_setting`.
This patch ports all but two uses which read the status of the global
`advice_` variables over to the new `advice_enabled` API. We'll deal
with advice_add_embedded_repo and advice_graft_file_deprecated
separately.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In daef1b300b0 (Merge branch 'hw/advice-add-nothing', 2020-02-14), two
advice settings were introduced into the `advice_config` array.
Subsequently, c4a09cc9ccb (Merge branch 'hw/advise-ng', 2020-03-25)
started to deprecate `advice_config` in favor of a new array,
`advice_setting`.
However, the latter branch did not include the former branch, and
therefore `advice_setting` is missing the two entries added by the
`hw/advice-add-nothing` branch.
These are currently the only entries in `advice_config` missing from
`advice_setting`.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For diff family commands, we can tell them to exclude changes outside
of some directories if --relative is requested.
In diff_unmerge(), NULL will be returned if the requested path is
outside of the interesting directories, thus we'll run into NULL
pointer dereference in run_diff_files when trying to dereference
its return value.
Checking for return value of diff_unmerge before dereferencing
is not sufficient, though. Since, diff engine will try to work on such
pathspec later.
Let's not run diff on those unintesting entries, instead.
As a side effect, by skipping like that, we can save some CPU cycles.
Reported-by: Thomas De Zeeuw <thomas@slight.dev>
Tested-by: Carlo Arenas <carenas@gmail.com>
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In test_atom(), we're piping the output of cat-file to tail(1),
thus, losing its exit status.
Let's use a temporary file to preserve git exit status code.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In t6300, some tests are guarded behind some prerequisites.
Thus, objects created by those tests ain't available if those
prerequisites are unsatistified. Attempting to run "cat-file"
on those objects will run into failure.
In fact, running t6300 in an environment without gpg(1),
we'll see those warnings:
fatal: Not a valid object name refs/tags/signed-empty
fatal: Not a valid object name refs/tags/signed-short
fatal: Not a valid object name refs/tags/signed-long
Let's put those commands into the real tests, in order to:
* skip their execution if prerequisites aren't satistified.
* check their exit status code
The expected value for objects with type: commit needs to be
computed outside the test because we can't rely on "$3" there.
Furthermore, to prevent the accidental usage of that computed
expected value, BUG out on unknown object's type.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 0696232390 (pack-redundant: fix crash when one packfile in repo,
2020-12-16) added one some new tests to t5323. At the time, the sub-repo
we used was called "master". But in a parallel branch, this was switched
to "main".
When the latter branch was merged in 27d7c8599b (Merge branch
'js/default-branch-name-tests-final-stretch', 2021-01-25), some of those
spots caused textual conflicts, but some (for tests that were far enough
away from other changed code) were just semantic. The merge resolution
fixed up most spots, but missed this one.
Even though this did impact actual code, it turned out not to fail the
tests. Running 'cd "$master_repo"' ended up staying in the same
directory, running the test in the main trash repo instead of the
sub-repo. But because the point of the test is checking behavior when
there are no packfiles, it worked in either repo (since both are empty
at this point in the script).
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Loading of ref tips to prepare for common ancestry negotiation in
"git fetch-pack" has been optimized by taking advantage of the
commit graph when available.
* ps/fetch-pack-load-refs-optim:
fetch-pack: speed up loading of refs via commit graph
|
|
Bugfix for common ancestor negotiation recently introduced in "git
push" code path.
* jt/push-negotiation-fixes:
fetch: die on invalid --negotiation-tip hash
send-pack: fix push nego. when remote has refs
send-pack: fix push.negotiate with remote helper
|
|
trace2 logs learned to show parent process name to see in what
context Git was invoked.
* es/trace2-log-parent-process-name:
tr2: log parent process name
tr2: make process info collection platform-generic
|
|
A handful of tests that assumed implementation details of files
backend for refs have been cleaned up.
* hn/refs-test-cleanup:
t6001: avoid direct file system access
t6500: use "ls -1" to snapshot ref database state
t7064: use update-ref -d to remove upstream branch
t1410: mark test as REFFILES
t1405: mark test for 'git pack-refs' as REFFILES
t1405: use 'git reflog exists' to check reflog existence
t2402: use ref-store test helper to create broken symlink
t3320: use git-symbolic-ref rather than filesystem access
t6120: use git-update-ref rather than filesystem access
t1503: mark symlink test as REFFILES
t6050: use git-update-ref rather than filesystem access
|
|
Final batch for "merge -sort" optimization.
* en/ort-perf-batch-15:
merge-ort: remove compile-time ability to turn off usage of memory pools
merge-ort: reuse path strings in pool_alloc_filespec
merge-ort: store filepairs and filespecs in our mem_pool
diffcore-rename, merge-ort: add wrapper functions for filepair alloc/dealloc
merge-ort: switch our strmaps over to using memory pools
merge-ort: set up a memory pool
merge-ort: add pool_alloc, pool_calloc, and pool_strndup wrappers
diffcore-rename: use a mem_pool for exact rename detection's hashmap
merge-ort: rename str{map,intmap,set}_func()
|
|
Pathname expansion (like "~username/") learned a way to specify a
location relative to Git installation (e.g. its $sharedir which is
$(prefix)/share), with "%(prefix)".
* js/expand-runtime-prefix:
expand_user_path: allow in-flight topics to keep using the old name
interpolate_path(): allow specifying paths relative to the runtime prefix
Use a better name for the function interpolating paths
expand_user_path(): clarify the role of the `real_home` parameter
expand_user_path(): remove stale part of the comment
tests: exercise the RUNTIME_PREFIX feature
|
|
Doc update.
* ab/bundle-doc:
bundle doc: replace "basis" with "prerequsite(s)"
bundle doc: elaborate on rev<->ref restriction
bundle doc: elaborate on object prerequisites
bundle doc: rewrite the "DESCRIPTION" section
|
|
Prepare the "ref-filter" machinery that drives the "--format"
option of "git for-each-ref" and its friends to be used in "git
cat-file --batch".
* zh/ref-filter-raw-data:
ref-filter: add %(rest) atom
ref-filter: use non-const ref_format in *_atom_parser()
ref-filter: --format=%(raw) support --perl
ref-filter: add %(raw) atom
ref-filter: add obj-type check in grab contents
|
|
Input validation of "git pack-objects --stdin-packs" has been
corrected.
* ab/pack-stdin-packs-fix:
pack-objects: fix segfault in --stdin-packs option
pack-objects tests: cover blindspots in stdin handling
|
|
Support for ancient versions of cURL library (pre 7.19.4) has been
dropped.
* ab/http-drop-old-curl:
http: rename CURLOPT_FILE to CURLOPT_WRITEDATA
http: drop support for curl < 7.19.3 and < 7.17.0 (again)
http: drop support for curl < 7.19.4
http: drop support for curl < 7.16.0
http: drop support for curl < 7.11.1
|
|
"git add" can work better with the sparse index.
* ds/add-with-sparse-index:
add: remove ensure_full_index() with --renormalize
add: ignore outside the sparse-checkout in refresh()
pathspec: stop calling ensure_full_index
add: allow operating on a sparse-only index
t1092: test merge conflicts outside cone
|
|
"git bisect" spawned "git show-branch" only to pretty-print the
title of the commit after checking out the next version to be
tested; this has been rewritten in C.
* jc/bisect-sans-show-branch:
bisect: simplify return code from bisect_checkout()
bisect: do not run show-branch just to show the current commit
|
|
The die() routine adds a "fatal: " prefix, there is no reason to add
another one. Fixes code added in e65123a71d0 (builtin rebase: support
`git rebase <upstream> <switch-to>`, 2018-09-04).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Set packet_trace_identity() for ls-remote. This replaces the generic
"git" identity in GIT_TRACE_PACKET=<file> traces to "ls-remote", e.g.:
[...] packet: upload-pack> version 2
[...] packet: upload-pack> agent=git/2.32.0-dev
[...] packet: ls-remote< version 2
[...] packet: ls-remote< agent=git/2.32.0-dev
Where in an "git ls-remote file://<path>" dialog ">" is the sender (or
"to the server") and "<" is the recipient (or "received by the
client").
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
xmalloc() dies on error, allows zero-sized allocations and enforces
GIT_ALLOC_LIMIT for testing. Our mmap replacement doesn't need any of
that. Let's cut out the wrapper, reject zero-sized requests as required
by POSIX and use malloc(3) directly. Allocation errors were needlessly
handled by git_mmap() before; this code becomes reachable now.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On macOS, we use launchctl to manage the background maintenance
schedule. This uses a set of .plist files to describe the schedule, but
these files are also registered with 'launchctl bootstrap'. If multiple
'git maintenance start' commands run concurrently, then they can collide
replacing these schedule files and registering them with launchctl.
To avoid extra launchctl commands, do a check for the .plist files on
disk and check if they are registered using 'launchctl list <name>'.
This command will return with exit code 0 if it exists, or exit code 113
if it does not.
We can test this behavior using the GIT_TEST_MAINT_SCHEDULER environment
variable.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When two `git maintenance` processes try to write the `.plist` file, we
need to help them with serializing their efforts.
The 150ms time-out value was determined from thin air.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On Windows, $(pwd) returns a drive-letter style path C:/foo, while $PWD
contains a POSIX style /c/foo path. When we want to interpolate the
current directory in the PATH variable, we must not use the C:/foo style,
because the meaning of the colon is ambiguous. Use the POSIX style.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The variable D is never defined in test t5582, more severely the test
fails if D is defined by something outside the test suite, so remove
this spurious line.
Signed-off-by: Mickey Endito <mickey.endito.2323@protonmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new submodule--helper subcommand `run-update-procedure` that runs
the update procedure if the SHA1 of the submodule does not match what
the superproject expects.
This is an intermediate change that works towards total conversion of
`submodule update` from shell to C.
Specific error codes are returned so that the shell script calling the
subcommand can take a decision on the control flow, and preserve the
error messages across subsequent recursive calls of `cmd_update`.
This change is more focused on doing a faithful conversion, so for now we
are not too concerned with trying to reduce subprocess spawns.
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the technical documentation to describe the multi-pack bitmap
format. This patch merely introduces the new format, and describes its
high-level ideas. Git does not yet know how to read nor write these
multi-pack variants, and so the subsequent patches will:
- Introduce code to interpret multi-pack bitmaps, according to this
document.
- Then, introduce code to write multi-pack bitmaps from the 'git
multi-pack-index write' sub-command.
Finally, the implementation will gain tests in subsequent patches (as
opposed to inline with the patch teaching Git how to write multi-pack
bitmaps) to avoid a cyclic dependency.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When writing a new bitmap, the bitmap writer code attempts to read the
existing bitmap (if one is present). This is done in order to quickly
permute the bits of any bitmaps for commits which appear in the existing
bitmap, and were also selected for the new bitmap.
But since this code was added in 341fa34887 (pack-bitmap-write: use
existing bitmaps, 2020-12-08), the resources associated with opening an
existing bitmap were never released.
It's fine to ignore this, but it's bad hygiene. It will also cause a
problem for the multi-pack-index builtin, which will be responsible not
only for writing bitmaps, but also for expiring any old multi-pack
bitmaps.
If an existing bitmap was reused here, it will also be expired. That
will cause a problem on platforms which require file resources to be
closed before unlinking them, like Windows. Avoid this by ensuring we
close reused bitmaps with free_bitmap_index() before removing them.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The set of objects covered by a bitmap must be closed under
reachability, since it must be the case that there is a valid bit
position assigned for every possible reachable object (otherwise the
bitmaps would be incomplete).
Pack bitmaps are never written from 'git repack' unless repacking
all-into-one, and so we never write non-closed bitmaps (except in the
case of partial clones where we aren't guaranteed to have all objects).
But multi-pack bitmaps change this, since it isn't known whether the
set of objects in the MIDX is closed under reachability until walking
them. Plumb through a bit that is set when a reachable object isn't
found.
As soon as a reachable object isn't found in the set of objects to
include in the bitmap, bitmap_writer_build() knows that the set is not
closed, and so it now fails gracefully.
A test is added in t0410 to trigger a bitmap write without full
reachability closure by removing local copies of some reachable objects
from a promisor remote.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The special `--test-bitmap` mode of `git rev-list` is used to compare
the result of an object traversal with a bitmap to check its integrity.
This mode does not, however, assert that the types of reachable objects
are stored correctly.
Harden this mode by teaching it to also check that each time an object's
bit is marked, the corresponding bit should be set in exactly one of the
type bitmaps (whose type matches the object's true type).
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git cherry-pick", upon seeing a conflict, says:
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add <paths>' or 'git rm <paths>'
hint: and commit the result with 'git commit'
as if running "git commit" to conclude the resolution of
this single step were the end of the story. This stems from
the fact that the command originally was to pick a single
commit and not a range of commits, and the message was
written back then and has not been adjusted.
When picking a range of commits and the command stops with a
conflict in the middle of the range, however, after
resolving the conflict and (optionally) recording the result
with "git commit", the user has to run "git cherry-pick
--continue" to have the rest of the range dealt with,
"--skip" to drop the current commit, or "--abort" to discard
the series.
Suggest use of "git cherry-pick --continue/--skip/--abort"
so that the message also covers the case where a range of
commits are being picked.
Similarly, this optimization can be applied to git revert,
suggest use of "git revert --continue/--skip/--abort" so
that the message also covers the case where a range of
commits are being reverted.
It is worth mentioning that now we use advice() to print
the content of GIT_CHERRY_PICK_HELP in print_advice(), each
line of output will start with "hint: ".
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Hariom Verma <hariom18599@gmail.com>
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: ZheNing Hu <adlternative@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a rebase is started with a --strategy option other than "ort" or
"recursive" then "merge -c" does not allow the user to reword the
commit message.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fast-forwarding we do not create a new commit so .git/MERGE_MSG
is not removed and can end up seeding the message of a commit made
after the rebase has finished. Avoid writing .git/MERGE_MSG when we
are fast-forwarding by writing the file after the fast-forward
checks. Note that there are no changes to the fast-forward code, it is
simply moved.
Note that the way this change is implemented means we no longer write
the author script when fast-forwarding either. I believe this is safe
for the reasons below but it is a departure from what we do when
fast-forwarding a non-merge commit. If we reword the merge then 'git
commit --amend' will keep the authorship of the commit we're rewording
as it ignores GIT_AUTHOR_* unless --reset-author is passed. It will
also export the correct GIT_AUTHOR_* variables to any hooks and we
already test the authorship of the reworded commit. If we are not
rewording then we no longer call spilt_ident() which means we are no
longer checking the commit author header looks sane. However this is
what we already do when fast-forwarding non-merge commits in
skip_unnecessary_picks() so I don't think we're breaking any promises
by not checking the author here.
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
None of the existing reword tests check that there are no uncommitted
changes when the editor is opened. Reuse the editor script from the
last commit to fix this omission.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user runs git log while rewording a commit it is confusing if
sometimes we're amending the commit that's being reworded and at other
times we're creating a new commit depending on whether we could
fast-forward or not[1]. For this reason the reword command ensures
that there are no uncommitted changes when rewording. The reword
command also allows the user to edit the todo list while the rebase is
paused. As 'merge -c' also rewords commits make it behave like reword
and add a test.
[1] https://lore.kernel.org/git/xmqqlfvu4be3.fsf@gitster-ct.c.googlers.com/T/#m133009cb91cf0917bcf667300f061178be56680a
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The rules creating the $(LIB_FILE) and $(XDIFF_LIB) archives used to
be:
$(QUIET_AR)$(RM) $@ && $(AR) $(ARFLAGS) $@ $^
until commit 7b76d6bf22 (Makefile: add and use the ".DELETE_ON_ERROR"
flag, 2021-06-29) removed the '$(RM) $@' part, claiming that "we can
rely on the "c" (create) being present in ARFLAGS", and (I presume)
assuming that it means that the named archive is created from scratch.
Unfortunately, that's not what the 'c' flag does, it merely "Suppress
the diagnostic message that is written to standard error by default
when the archive is created" [1]. Consequently, all object files that
are already present in an existing archive and are not replaced will
remain there. This leads to linker errors in back-to-back builds of
different revisions without a 'make clean' between them if source
files going into these archives are renamed in between:
# The last commit renaming files that go into 'libgit.a':
# bc62692757 (hash-lookup: rename from sha1-lookup, 2020-12-31)
# sha1-lookup.c => hash-lookup.c | 14 +++++++-------
# sha1-lookup.h => hash-lookup.h | 12 ++++++------
$ git checkout bc62692757^
HEAD is now at 7a7d992d0d sha1-lookup: rename `sha1_pos()` as `hash_pos()`
$ make
[...]
$ git checkout 7b76d6bf22
HEAD is now at 7b76d6bf22 Makefile: add and use the ".DELETE_ON_ERROR" flag
$ make
[...]
AR libgit.a
LINK git
/usr/bin/ld: libgit.a(hash-lookup.o): in function `bsearch_hash':
/home/szeder/src/git/hash-lookup.c:105: multiple definition of `bsearch_hash'; libgit.a(sha1-lookup.o):/home/szeder/src/git/sha1-lookup.c:105: first defined here
collect2: error: ld returned 1 exit status
make: *** [Makefile:2213: git] Error 1
Restore the original make rules to first remove $(LIB_FILE) and
$(XDIFF_LIB) and then create them from scratch to avoid these build
errors.
[1] Quoting POSIX at:
https://pubs.opengroup.org/onlinepubs/9699919799/utilities/ar.html
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The cleanup of old compat wrappers in bash completion caused a
regression on tcsh completion that still uses them.
Let's update the tcsh call site as well for addressing it.
Fixes: 441ecdab37fe ("completion: bash: remove old compat wrappers")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
__gitcomp automatically adds a suffix, but __gitcomp_nl and others
don't, we need to specify a space by default.
Can be tested with:
git config branch.autoSetupMe<tab>
This fix only works for versions of bash greater than 4.0, before that
"local sfx" creates an empty string, therefore the unset expansion
doesn't work. The same happens in zsh.
Therefore we don't add the test for that for now.
The correct fix for all shells requires semantic changes in __gitcomp,
but that can be done later.
Cc: SZEDER Gábor <szeder.dev@gmail.com>
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Otherwise options of commands like 'for-each-ref' are not completed.
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We need to ignore options that don't start with -- as well.
Depending on the value of COMP_WORDBREAKS the last word could be
duplicated otherwise.
Can be tested with:
git merge -X diff-algorithm=<tab>
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Otherwise we are completely ignoring the --cur argument.
The issue can be tested with:
git clone --config=branch.<tab>
Reviewed-by: SZEDER Gábor <szeder.dev@gmail.com>
Tested-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Codepath to access recently added oidtree data structure had
to make unaligned accesses to oids, which has been corrected.
* rs/oidtree-alignment-fix:
oidtree: avoid unaligned access to crit-bit tree
|
|
l10n-2.33.0-rnd2
* tag 'l10n-2.33.0-rnd2' of git://github.com/git-l10n/git-po: (46 commits)
l10n: sv.po: Update Swedish translation (5230t0f0u)
l10n: TEAMS: change Simplified Chinese team leader
l10n: tr: v2.33 (round 2)
l10n: es: 2.33.0 round 2
l10n: zh_CN: for git v2.33.0 l10n round 2
l10n: zh_CN: Revision for git v2.32.0 l10n round 1
l10n: README: refactor to use GFM syntax
l10n: update German translation for Git v2.33.0 (rnd2)
l10n: pt_PT: v2.33.0 round 2
l10n: pt_PT: git-po-helper update
l10n: pt_PT: update translation table
l10n: zh_TW.po: remove the obsolete glossary
l10n: vi.po(5230t): Updated translation for v2.32.0 round 2
l10n: fr.po v2.33 rnd 2
l10n: id: po-id for 2.33.0 round 2
l10n: zh_TW.po: update for v2.33.0 rnd 2
l10n: git.pot: v2.33.0 round 2 (11 new, 8 removed)
l10n: de.po: fix typos
l10n: update German translation for Git v2.33.0
l10n: fr.po fix typos in commands and variables
...
|
|
Also fixed some typos reported by "git-po-helper".
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
The flexible array member "k" of struct cb_node is used to store the key
of the crit-bit tree node. It offers no alignment guarantees -- in fact
the current struct layout puts it one byte after a 4-byte aligned
address, i.e. guaranteed to be misaligned.
oidtree uses a struct object_id as cb_node key. Since cf0983213c (hash:
add an algo member to struct object_id, 2021-04-26) it requires 4-byte
alignment. The mismatch is reported by UndefinedBehaviorSanitizer at
runtime like this:
hash.h:277:2: runtime error: member access within misaligned address 0x00015000802d for type 'struct object_id', which requires 4 byte alignment
0x00015000802d: note: pointer points here
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
^
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior hash.h:277:2 in
We can fix that by:
1. eliminating the alignment requirement of struct object_id,
2. providing the alignment in struct cb_node, or
3. avoiding the issue by only using memcpy to access "k".
Currently we only store one of two values in "algo" in struct object_id.
We could use a uint8_t for that instead and widen it only once we add
support for our twohundredth algorithm or so. That would not only avoid
alignment issues, but also reduce the memory requirements for each
instance of struct object_id by ca. 9%.
Supporting keys with alignment requirements might be useful to spread
the use of crit-bit trees. It can be achieved by using a wider type for
"k" (e.g. uintmax_t), using different types for the members "byte" and
"otherbits" (e.g. uint16_t or uint32_t for each), or by avoiding the use
of flexible arrays like khash.h does.
This patch implements the third option, though, because it has the least
potential for causing side-effects and we're close to the next release.
If one of the other options is implemented later as well to get their
additional benefits we can get rid of the extra copies introduced here.
Reported-by: Andrzej Hunt <andrzej@ahunt.org>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
e9f79acb28 (ci: upgrade to using actions/{up,down}load-artifacts v2,
2021-06-23) changed all calls to that action from v1 to v2, but there
is still an open bug[1] that affects all nodejs actions and prevents
its use in 32-bit linux (as used by the Linux32 container)
move all dockerized jobs to use v1 that was built in C# and therefore
doesn't have this problem, which will otherwise manifest with confusing
messages like:
/usr/bin/docker exec 0285adacc4536b7cd962079c46f85fa05a71e66d7905b5e4b9b1a0e8b305722a sh -c "cat /etc/*release | grep ^ID"
OCI runtime exec failed: exec failed: container_linux.go:380: starting container process caused: no such file or directory: unknown
[1] https://github.com/actions/runner/issues/1011
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent changes to --fixup, adding amend suboption, caused the
--edit flag to be ignored as use_editor was always set to zero.
Restore edit_flag having higher priority than fixup_message when
deciding the value of use_editor by moving the edit flag condition
later in the method.
Signed-off-by: Joel Klinghed <the_jk@spawned.biz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'next' of github.com:ChrisADR/git-po:
l10n: es: 2.33.0 round 2
|
|
Signed-off-by: Emir Sarı <bitigchi@me.com>
|
|
Signed-off-by: Christopher Diaz Riveros <christopher.diaz.riv@gmail.com>
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Javier Spagnoletti phansys@gmail.com
Signed-off-by: Cleydyr Albuquerque <cleydyr@gmail.com>
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Guillermo Ramos <gramosg>
|
|
Translate 48 new messages (5230t0f0u) for git 2.33.0, and also fixed
typos found by "git-po-helper".
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Fangyi Zhou <me@fangyi.io>
|
|
Signed-off-by: Fangyi Zhou <me@fangyi.io>
|
|
Format README.md using GFM (GitHub Flavored Markdown) syntax.
- In order to use more than 3 level headings, use ATX style headings
instead of setext style headings.
- In order to add highlights for code blocks, use fenced code blocks
instead of indented code blocks.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'l10n-2.33-rnd2' of github.com:ralfth/git:
l10n: update German translation for Git v2.33.0 (rnd2)
|
|
* 'pt-PT' of github.com:git-l10n-pt-PT/git-po:
l10n: pt_PT: v2.33.0 round 2
l10n: pt_PT: git-po-helper update
l10n: pt_PT: update translation table
|
|
If help.autocorrect is set to 'prompt', the user is prompted
before the suggested action is executed.
Based on original patch by David Barr
https://lore.kernel.org/git/1283758030-13345-1-git-send-email-david.barr@cordelta.com/
Signed-off-by: Azeem Bande-Ali <me@azeemba.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
|
|
* translation of new entries
Signed-off-by: Daniel Santos <hello@brighterdan.com>
|
|
* run git-po-helper update pt_PT.po
Signed-off-by: Daniel Santos <hello@brighterdan.com>
|
|
* updated translation table
Signed-off-by: Daniel Santos <hello@brighterdan.com>
|
|
* 'loc/zh_TW/210814' of github.com:l10n-tw/git-po:
l10n: zh_TW.po: remove the obsolete glossary
l10n: zh_TW.po: update for v2.33.0 rnd 2
|
|
Signed-off-by: Yi-Jyun Pan <pan93412@gmail.com>
|
|
* 'master' of github.com:vnwildman/git:
l10n: vi.po(5230t): Updated translation for v2.32.0 round 2
|
|
* 'po-id' of github.com:bagasme/git-po:
l10n: id: po-id for 2.33.0 round 2
|
|
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
|
|
Update translation for following component:
* builtin/submodule--helper.c
Translate following new component:
* builtin/revert.c
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
|
|
Signed-off-by: Yi-Jyun Pan <pan93412@gmail.com>
|
|
* 'master' of github.com:vnwildman/git:
l10n: vi.po(5227t): Fixed typo after run git-po-helper
|
|
Generate po/git.pot from v2.33.0-rc2 for git v2.33.0 l10n round 2.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'master' of github.com:git/git: (51 commits)
Git 2.33-rc2
object-file: use unsigned arithmetic with bit mask
Revert 'diff-merges: let "-m" imply "-p"'
object-store: avoid extra ';' from KHASH_INIT
oidtree: avoid nested struct oidtree_node
Git 2.33-rc1
test: fix for COLUMNS and bash 5
The eighth batch
diff: --pickaxe-all typofix
mingw: align symlinks-related rmdir() behavior with Linux
t7508: avoid non POSIX BRE
use fspathhash() everywhere
t0001: fix broken not-quite getcwd(3) test in bed67874e2
Documentation: render special characters correctly
reset: clear_unpack_trees_porcelain to plug leak
builtin/rebase: fix options.strategy memory lifecycle
builtin/merge: free found_ref when done
builtin/mv: free or UNLEAK multiple pointers at end of cmd_mv
convert: release strbuf to avoid leak
read-cache: call diff_setup_done to avoid leak
...
|
|
* 'master' of github.com:nafmo/git-l10n-sv:
l10n: sv.po: Update Swedish translation (5227t0f0u)
|
|
* 'master' of github.com:alshopov/git-po:
l10n: bg.po: Updated Bulgarian translation (5227t)
|
|
* 'l10n-2.33' of github.com:ralfth/git:
l10n: de.po: fix typos
l10n: update German translation for Git v2.33.0
|
|
* 'fr_fix_typos' of github.com:jnavila/git:
l10n: fr.po fix typos in commands and variables
|
|
* 'master' of github.com:Softcatala/git-po:
l10n: Update Catalan translation
|
|
If the user skips the final commit by removing all the changes from
the index and worktree with 'git restore' (or read-tree) and then runs
'git rebase --continue' .git/MERGE_MSG is left behind. This will seed
the commit message the next time the user commits which is not what we
want to happen.
Reported-by: Victor Gambier <vgambier@excilys.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
980b482d28 ("rebase tests: mark tests specific to the am-backend with
--am", 2020-02-15) sought to prepare tests testing the "apply" backend
in preparation for 2ac0d6273f ("rebase: change the default backend
from "am" to "merge"", 2020-02-15). However some tests seem to have
been missed leading to us testing the "merge" backend twice. This
patch fixes some cases that I noticed while adding tests to these
files, I have not audited all the other rebase test files. I've
reworded a couple of the test descriptions to make it clear which
backend they are testing.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Setting GIT_AUTHOR_* when committing with --amend will only change the
author if we also pass --reset-author. This commit is used in some
tests that ensure the author ident does not change when rebasing.
Creating this commit without changing the authorship meant that the
test would not catch regressions that caused rebase to discard the
original authorship information.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix some typos found by `./git-po-helper check-po po/de.po`.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
|
|
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
|
|
make sure it uses a supported OS branch and uses all the resources
that can be allocated efficiently.
while only 1GB of memory is needed, 2GB is the minimum for a 2 CPU
machine (the default), but by increasing parallelism wall time has
been reduced by 35%.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Function `traverse_trees_and_blobs` not only works on trees and blobs,
but also on tags, the function name is somewhat misleading. This commit
rename it to `traverse_non_commits`.
Signed-off-by: Teng Long <dyroneteng@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
|
|
Jiang Xin reported possible typos in po/id.po, all of them are mismatch
variable names. Fix them.
Reported-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
|
|
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
|
Signed-off-by: Jordi Mas <jmas@softcatala.org>
|
|
In this test, we currently use the SHA1 prerequisite to specify the
algorithm we're using to test, since SHA-256 bundles are always v3,
whereas SHA-1 bundles default to v2, and as a result the default output
differs.
However, this causes a problem if we run with GIT_TEST_FAIL_PREREQS set,
since that means that we'll unexpectedly fail the SHA1 prerequisite,
resulting in incorrect expected output. Let's fix this by checking
against the built-in data called "algo", which tells us which algorithm
is in use. This should work in any situation, making our test a little
more robust.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'daniel' of github.com:git-l10n-pt-PT/git-po:
l10n: pt_PT: cleaning flags mismatch
l10n: pt_PT: cleaning duplicate translations
l10n: pt_PT: update translation tables
l10n: pt_PT: translated git v2.33.0
l10n: pt_PT: update git-po-helper
l10n: pt_PT: remove trailing comments
l10n: pt_PT: translation tables
l10n: pt_PT: add Portuguese translations part 5
l10n: pt_PT: add Portuguese translations part 4
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier "git log -m" was changed to always produce patch output,
which would break existing scripts, which has been reverted.
* jn/log-m-does-not-imply-p:
Revert 'diff-merges: let "-m" imply "-p"'
|
|
Build fix.
* cb/many-alternate-optim-fixup:
object-file: use unsigned arithmetic with bit mask
object-store: avoid extra ';' from KHASH_INIT
oidtree: avoid nested struct oidtree_node
|
|
similar to the recently added sparse task, it is nice to know as early
as possible.
add a dockerized build using fedora (that usually has the latest gcc)
to be ahead of the curve and avoid older ISO C issues at the same time.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, the git diff hunk headers show the wrong method signature if the
method has a qualified return type, an array return type, or a generic return
type because the regex doesn't allow dots (.), [], or < and > in the return
type. Also, type parameter declarations couldn't be matched.
Add several t4018 tests asserting the right hunk headers for different cases:
- enum constant change
- change in generic method with bounded type parameters
- change in generic method with wildcard
- field change in a nested class
Signed-off-by: Tassilo Horn <tsdh@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remind developers that they do not need to go overboard to implement
patterns to prepare for invalid constructs. They only have to be
sufficiently permissive, assuming that the payload is syntactically
correct, and that may allow them to be simpler.
Text stolen mostly from, and further improved by, Johannes Sixt.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
33f379eee6 (make object_directory.loose_objects_subdir_seen a bitmap,
2021-07-07) replaced a wasteful 256-byte array with a 32-byte array
and bit operations. The mask calculation shifts a literal 1 of type
int left by anything between 0 and 31. UndefinedBehaviorSanitizer
doesn't like that and reports:
object-file.c:2477:18: runtime error: left shift of 1 by 31 places cannot be represented in type 'int'
Make sure to use an unsigned 1 instead to avoid the issue.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* corrected git flags mismatch
Signed-off-by: Daniel Santos <hello@brighterdan.com>
|
|
* ds/add-with-sparse-index:
add: remove ensure_full_index() with --renormalize
add: ignore outside the sparse-checkout in refresh()
pathspec: stop calling ensure_full_index
add: allow operating on a sparse-only index
t1092: test merge conflicts outside cone
|
|
It is useful for performance monitoring and debugging purposes to know
the wire protocol used for remote operations. This may differ from the
version set in local configuration due to differences in version and/or
configuration between the server and the client. Therefore, log the
negotiated wire protocol version via trace2, for both clients and
servers.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's rename 'compute_submodule_clone_url()' to 'resolve_relative_url()'
to make it clear that this internal helper need not be used exclusively
for computing submodule clone URLs.
Since the original 'resolve-relative-url' subcommand and its C entry
point has been removed in c461095ae3 (submodule--helper: remove
resolve-relative-url subcommand, 2021-07-02), this rename can be done
without causing any confusion about which function it actually binds to.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The shell subcommand `resolve-relative-url` is no longer required, as
its last caller has been removed when it was converted to C.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also no longer needed is this subcommand, as all of its functionality is
being called by the newly-introduced `module_add()` directly within C.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We no longer need this subcommand, as all of its functionality is being
called by the newly-introduced `module_add()` directly within C.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce the 'add' subcommand to `submodule--helper.c` that does all
the work 'submodule add' past the parsing of flags.
We also remove the constness of the sm_path field of the `add_data`
struct. This is needed so that it can be modified by
normalize_path_copy().
As with the previous conversions, this is meant to be a faithful
conversion with no modification to the behaviour of `submodule add`.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Helped-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Based-on-patch-by: Shourya Shukla <periperidip@gmail.com>
Based-on-patch-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These functions can be useful to other parts of Git. Let's move them to
dir.c, while renaming them to be make their functionality more explicit.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This part of `sync_submodule()` is doing the same thing that
`compute_submodule_clone_url()` is doing. Let's reuse that helper here.
Note that this change adds a small overhead where we allocate and free
the 'remote' twice, but that is a small price to pay for the higher
level of abstraction we get.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor the helper function to resolve a relative url, by reusing the
existing `compute_submodule_clone_url()` function.
`compute_submodule_clone_url()` performs the same work that
`resolve_relative_url()` is doing, so we eliminate this code repetition
by moving the former function's definition up, and calling it inside
`resolve_relative_url()`.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's modify the interface to `compute_submodule_clone_url()` function
by adding two more arguments, so that we can reuse this in various parts
of `submodule--helper.c` that follow a common pattern, which is--read
the remote url configuration of the superproject and then call
`relative_url()`.
This function is nearly identical to `resolve_relative_url()`, the only
difference being the extra warning message. We can add a quiet flag to
it, to suppress that warning when not needed, and then refactor
`resolve_relative_url()` by using this function, something we will do in
the next patch.
We also rename the local variable 'relurl' to avoid potential confusion
with the 'rel_url' parameter while we are at it.
Having this functionality factored out will be useful for converting the
rest of `submodule add` in subsequent patches.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We parse through binary hunks by looping through the buffer with code
like:
llen = linelen(buffer, size);
...do something with the line...
buffer += llen;
size -= llen;
However, before we enter the loop, there is one call that increments
"buffer" but forgets to decrement "size". As a result, our "size" is off
by the length of that line, and subsequent calls to linelen() may look
past the end of the buffer for a newline.
The fix is easy: we just need to decrement size as we do elsewhere.
This bug goes all the way back to 0660626caf (binary diff: further
updates., 2006-05-05). Presumably nobody noticed because it only
triggers if the patch is corrupted, and even then we are often "saved"
by luck. We use a strbuf to store the incoming patch, so we overallocate
there, plus we add a 16-byte run of NULs as slop for memory comparisons.
So if this happened accidentally, the common case is that we'd just read
a few uninitialized bytes from the end of the strbuf before producing
the expected "this patch is corrupted" error complaint.
However, it is possible to carefully construct a case which reads off
the end of the buffer. The included test does so. It will pass both
before and after this patch when run normally, but using a tool like
ASan shows that we get an out-of-bounds read before this patch, but not
after.
Reported-by: Xingman Chen <xichixingman@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we iterate through the buffer containing git-log output, parsing
lines, we use an "int" to store the size of an individual line. This
should be a size_t, as we have no guarantee that there is not a
malicious 2GB+ commit-message line in the output.
Overflowing this integer probably doesn't do anything _too_ terrible. We
are not using the value to size a buffer, so the worst case is probably
an out-of-bounds read from before the array. But it's easy enough to
fix.
Note that we have to use ssize_t here, since we also store the length
result from parse_git_diff_header(), which may return a negative value
for error. That function actually returns an int itself, which has a
similar overflow problem, but I'll leave that for another day. Much
of the apply.c code uses ints and should be converted as a whole; in the
meantime, a negative return from parse_git_diff_header() will be
interpreted as an error, and we'll bail (so we can't handle such a case,
but given that it's likely to be malicious anyway, the important thing
is we don't have any memory errors).
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When parsing our buffer of output from git-log, we have a
find_end_of_line() helper that finds the next newline, and gives us the
number of bytes to move past it, or the size of the whole remaining
buffer if there is no newline.
But trying to handle both those cases leads to some oddities:
- we try to overwrite the newline with NUL in the caller, by writing
over line[len-1]. This is at best redundant, since the helper will
already have done so if it saw a newline. But if it didn't see a
newline, it's actively wrong; we'll overwrite the byte at the end of
the (unterminated) line.
We could solve this just dropping the extra NUL assignment in the
caller and just letting the helper do the right thing. But...
- if we see a "diff --git" line, we'll restore the newline on top of
the NUL byte, so we can pass the string to parse_git_diff_header().
But if there was no newline in the first place, we can't do this.
There's no place to put it (the current code writes a newline
over whatever byte we obliterated earlier). The best we can do is
feed the complete remainder of the buffer to the function (which is,
in fact, a string, by virtue of being a strbuf).
To solve this, the caller needs to know whether we actually found a
newline or not. We could modify find_end_of_line() to return that
information, but we can further observe that it has only one caller.
So let's just inline it in that caller.
Nobody seems to have noticed this case, probably because git-log would
never produce input that doesn't end with a newline. Arguably we could
just return an error as soon as we see that the output does not end in a
newline. But the code to do so actually ends up _longer_, mostly because
of the cleanup we have to do in handling the error.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "offset" variable was was introduced in 44b67cb62b (range-diff:
split lines manually, 2019-07-11), but it has never done anything
useful. We use it to count up the number of bytes we've consumed, but we
never look at the result. It was probably copied accidentally from an
almost-identical loop in apply.c:find_header() (and the point of that
commit was to make use of the parse_git_diff_header() function which
underlies both).
Because the variable was set but not used, most compilers didn't seem to
notice, but the upcoming clang-14 does complain about it, via its
-Wunused-but-set-variable warning.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cleaning duplicate incorrect translations part 1
Signed-off-by: Daniel Santos <hello@brighterdan.com>
|
|
* update translation tables
Signed-off-by: Daniel Santos <hello@brighterdan.com>
|
|
* translated new entries of git v2.33.0
Signed-off-by: Daniel Santos <hello@brighterdan.com>
|
|
* ar/submodule-add-config:
submodule--helper: introduce add-config subcommand
|
|
Add a new "add-config" subcommand to `git submodule--helper` with the
goal of converting part of the shell code in git-submodule.sh related to
`git submodule add` into C code. This new subcommand sets the
configuration variables of a newly added submodule, by registering the
url in local git config, as well as the submodule name and path in the
.gitmodules file. It also sets 'submodule.<name>.active' to "true" if
the submodule path has not already been covered by any pathspec
specified in 'submodule.active'.
This is meant to be a faithful conversion from shell to C, although we
add comments to areas that could be improved in future patches, after
the conversion has settled.
Signed-off-by: Atharva Raykar <raykar.ath@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored-by: Shourya Shukla <periperidip@gmail.com>
Based-on-patch-by: Shourya Shukla <periperidip@gmail.com>
Based-on-patch-by: Prathamesh Chavan <pc44800@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit f5bfcc823ba242a46e20fb6f71c9fbf7ebb222fe, which
made "git log -m" imply "--patch" by default. The logic was that
"-m", which makes diff generation for merges perform a diff against
each parent, has no use unless I am viewing the diff, so we could save
the user some typing by turning on display of the resulting diff
automatically. That wasn't expected to adversely affect scripts
because scripts would either be using a command like "git diff-tree"
that already emits diffs by default or would be combining -m with a
diff generation option such as --name-status. By saving typing for
interactive use without adversely affecting scripts in the wild, it
would be a pure improvement.
The problem is that although diff generation options are only relevant
for the displayed diff, a script author can imagine them affecting
path limiting. For example, I might run
git log -w --format=%H -- README
hoping to list commits that edited README, excluding whitespace-only
changes. In fact, a whitespace-only change is not TREESAME so the use
of -w here has no effect (since we don't apply these diff generation
flags to the diff_options struct rev_info::pruning used for this
purpose), but the documentation suggests that it should work
Suppose you specified foo as the <paths>. We shall call
commits that modify foo !TREESAME, and the rest TREESAME. (In
a diff filtered for foo, they look different and equal,
respectively.)
and a script author who has not tested whitespace-only changes
wouldn't notice.
Similarly, a script author could include
git log -m --first-parent --format=%H -- README
to filter the first-parent history for commits that modified README.
The -m is a no-op but it reflects the script author's intent. For
example, until 1e20a407fe2 (stash list: stop passing "-m" to "git
log", 2021-05-21), "git stash list" did this.
As a result, we can't safely change "-m" to imply "-p" without fear of
breaking such scripts. Restore the previous behavior.
Noticed because Rust's src/bootstrap/bootstrap.py made use of this
same construct: https://github.com/rust-lang/rust/pull/87513. That
script has been updated to omit the unnecessary "-m" option, but we
can expect other scripts in the wild to have similar expectations.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
|
|
When queueing references in git-rev-list(1), we try to optimize parsing
of commits via the commit-graph. To do so, we first look up the object's
type, and if it is a commit we call `repo_parse_commit()` instead of
`parse_object()`. This is quite inefficient though given that we're
always uncompressing the object header in order to determine the type.
Instead, we can opportunistically search the commit-graph for the object
ID: in case it's found, we know it's a commit and can directly fill in
the commit object without having to uncompress the object header.
Expose a new function `lookup_commit_in_graph()`, which tries to find a
commit in the commit-graph by ID, and convert `get_reference()` to use
this function. This provides a big performance win in cases where we
load references in a repository with lots of references pointing to
commits. The following has been executed in a real-world repository with
about 2.2 million refs:
Benchmark #1: HEAD~: rev-list --unsorted-input --objects --quiet --not --all --not $newrev
Time (mean ± σ): 4.458 s ± 0.044 s [User: 4.115 s, System: 0.342 s]
Range (min … max): 4.409 s … 4.534 s 10 runs
Benchmark #2: HEAD: rev-list --unsorted-input --objects --quiet --not --all --not $newrev
Time (mean ± σ): 3.089 s ± 0.015 s [User: 2.768 s, System: 0.321 s]
Range (min … max): 3.061 s … 3.105 s 10 runs
Summary
'HEAD: rev-list --unsorted-input --objects --quiet --not --all --not $newrev' ran
1.44 ± 0.02 times faster than 'HEAD~: rev-list --unsorted-input --objects --quiet --not --all --not $newrev'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function `find_commit_in_graph()` assumes that the caller has passed
an object which was already determined to be a commit given that it will
access the commit's graph position, which is stored in a commit slab. In
a subsequent patch, we want to search for an object ID though without
knowing whether it is a commit or not, which is not currently possible.
Split out the logic to search the commit graph for a given object ID to
prepare for this change. This commit also renames the function to
`find_commit_pos_in_graph()`, which more accurately reflects what this
function does. Furthermore, in order to allow for the searched object ID
to be const, we need to adjust `bsearch_graph()`'s signature to accept a
constant object ID as input, too.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When queueing up references for the revision walk, `handle_one_ref()`
will resolve the reference's object ID via `get_reference()` and then
queue the ID as pending object via `add_pending_oid()`. But given that
`add_pending_oid()` is only a thin wrapper around `add_pending_object()`
which fist calls `get_reference()`, we effectively resolve the reference
twice and thus duplicate some of the work.
Fix the issue by instead calling `add_pending_object()` directly, which
takes the already-resolved object as input. In a repository with lots of
refs, this translates into a near 10% speedup:
Benchmark #1: HEAD~: rev-list --unsorted-input --objects --quiet --not --all --not $newrev
Time (mean ± σ): 5.015 s ± 0.038 s [User: 4.698 s, System: 0.316 s]
Range (min … max): 4.970 s … 5.089 s 10 runs
Benchmark #2: HEAD: rev-list --unsorted-input --objects --quiet --not --all --not $newrev
Time (mean ± σ): 4.606 s ± 0.029 s [User: 4.260 s, System: 0.345 s]
Range (min … max): 4.565 s … 4.657 s 10 runs
Summary
'HEAD: rev-list --unsorted-input --objects --quiet --not --all --not $newrev' ran
1.09 ± 0.01 times faster than 'HEAD~: rev-list --unsorted-input --objects --quiet --not --all --not $newrev'
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to compute whether objects reachable from a set of tips are all
connected, we do a revision walk with these tips as positive references
and `--not --all`. `--not --all` will cause the revision walk to load
all preexisting references as uninteresting, which can be very expensive
in repositories with many references.
Benchmarking the git-rev-list(1) command highlights that by far the most
expensive single phase is initial sorting of the input revisions: after
all references have been loaded, we first sort commits by author date.
In a real-world repository with about 2.2 million references, it makes
up about 40% of the total runtime of git-rev-list(1).
Ultimately, the connectivity check shouldn't really bother about the
order of input revisions at all. We only care whether we can actually
walk all objects until we hit the cut-off point. So sorting the input is
a complete waste of time.
Introduce a new "--unsorted-input" flag to git-rev-list(1) which will
cause it to not sort the commits and adjust the connectivity check to
always pass the flag. This results in the following speedups, executed
in a clone of gitlab-org/gitlab [1]:
Benchmark #1: git rev-list --objects --quiet --not --all --not $(cat newrev)
Time (mean ± σ): 7.639 s ± 0.065 s [User: 7.304 s, System: 0.335 s]
Range (min … max): 7.543 s … 7.742 s 10 runs
Benchmark #2: git rev-list --unsorted-input --objects --quiet --not --all --not $newrev
Time (mean ± σ): 4.995 s ± 0.044 s [User: 4.657 s, System: 0.337 s]
Range (min … max): 4.909 s … 5.048 s 10 runs
Summary
'git rev-list --unsorted-input --objects --quiet --not --all --not $(cat newrev)' ran
1.53 ± 0.02 times faster than 'git rev-list --objects --quiet --not --all --not $newrev'
[1]: https://gitlab.com/gitlab-org/gitlab.git. Note that not all refs
are visible to clients.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
d540b70c85 (merge: cleanup messages like commit, 2019-04-17) adds
a way to change part of the helper text using a single call to
strbuf_add_commented_addf but with two formats with varying number
of parameters.
this trigger a warning in old versions of Xcode (ex 8.0), so use
instead two independent calls with a matching number of parameters
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
cf2dc1c238 (speed up alt_odb_usable() with many alternates, 2021-07-07)
introduces a KHASH_INIT invocation with a trailing ';', which while
commonly expected will trigger warnings with pedantic on both
clang[-Wextra-semi] and gcc[-Wpedantic], because that macro has already
a semicolon and is meant to be invoked without one.
while fixing the macro would be a worthy solution (specially considering
this is a common recurring problem), remove the extra ';' for now to
minimize churn.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
92d8ed8ac1 (oidtree: a crit-bit tree for odb_loose_cache, 2021-07-07)
adds a struct oidtree_node that contains only an n field with a
struct cb_node.
unfortunately, while building in pedantic mode witch clang 12 (as well
as a similar error from gcc 11) it will show:
oidtree.c:11:17: error: 'n' may not be nested in a struct due to flexible array member [-Werror,-Wflexible-array-extensions]
struct cb_node n;
^
because of a constrain coded in ISO C 11 6.7.2.1¶3 that forbids using
structs that contain a flexible array as part of another struct.
use a strict cb_node directly instead.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
|
The case statement in detect-compiler notices 'clang', 'FreeBSD
clang' and 'Apple clang', but there are other platforms that follow
the '$VENDOR clang' pattern (e.g. Debian).
Generalize the pattern to catch them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The get_family and get_version helpers of detect-compiler assume
that the line to identify the version from the compilers have a
token "version", followed by the version number, followed by some
other string, e.g.
$ CC=gcc get_version_line
gcc version 10.2.1 20210110 (Debian 10.2.1-6)
But that is not necessarily true, e.g.
$ CC=clang get_version_line
Debian clang version 11.0.1-2
Tweak the script not to require extra string after the version.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
1da1580e4c (Makefile: detect compiler and enable more warnings in
DEVELOPER=1, 2018-04-14) uses the output of the compiler banner to
detect the compiler family.
Apple had since changed the wording used to refer to its compiler
as clang instead of LLVM as shown by:
$ cc --version
Apple clang version 12.0.5 (clang-1205.0.22.9)
Target: x86_64-apple-darwin20.6.0
Thread model: posix
InstalledDir: /Library/Developer/CommandLineTools/usr/bin
so update the script to match, and allow DEVELOPER=1 to work as
expected again in macOS.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/t7508-regexp-fix:
t7508: avoid non POSIX BRE
|
|
* ab/pickaxe-pcre2:
diff: --pickaxe-all typofix
|
|
* fc/disable-checkwinsize:
test: fix for COLUMNS and bash 5
|
|
Since c49a177bec (test-lib.sh: set COLUMNS=80 for --verbose
repeatability, 2021-06-29) multiple tests have been failing when using
bash 5 because checkwinsize is enabled by default, therefore COLUMNS is
reset using TIOCGWINSZ even for non-interactive shells.
It's debatable whether or not bash should even be doing that, but for
now we can avoid this undesirable behavior by disabling this option.
Reported-by: Fabian Stelzer <fabian.stelzer@campoint.net>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
[jc: with SZEDER Gábor's suggestion to do this before setting COLUMNS]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
* 'po-id' of github.com:bagasme/git-po:
l10n: id: po-id for 2.33.0 (round 1)
|
|
Make it clear that `ort` is the default merge strategy now rather than
`recursive`, including moving `ort` to the front of the list of merge
strategies.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are a few reasons to switch the default:
* Correctness
* Extensibility
* Performance
I'll provide some summaries about each.
=== Correctness ===
The original impetus for a new merge backend was to fix issues that were
difficult to fix within recursive's design. The success with this goal
is perhaps most easily demonstrated by running the following:
$ git grep -2 KNOWN_FAILURE t/ | grep -A 4 GIT_TEST_MERGE_ALGORITHM
$ git grep test_expect_merge_algorithm.failure.success t/
$ git grep test_expect_merge_algorithm.success.failure t/
In order, these greps show:
* Seven sets of submodule tests (10 total tests) that fail with
recursive but succeed with ort
* 22 other tests that fail with recursive, but succeed with ort
* 0 tests that pass with recursive, but fail with ort
=== Extensibility ===
Being able to perform merges without touching the working tree or index
makes it possible to create new features that were difficult with the
old backend:
* Merging, cherry-picking, rebasing, reverting in bare repositories...
or just on branches that aren't checked out.
* `git diff AUTO_MERGE` -- ability to see what changes the user has
made to resolve conflicts so far (see commit 5291828df8 ("merge-ort:
write $GIT_DIR/AUTO_MERGE whenever we hit a conflict", 2021-03-20)
* A --remerge-diff option for log/show, used to show diffs for merges
that display the difference between what an automatic merge would
have created and what was recorded in the merge. (This option will
often result in an empty diff because many merges are clean, but for
the non-clean ones it will show how conflicts were fixed including
the removal of conflict markers, and also show additional changes
made outside of conflict regions to e.g. fix semantic conflicts.)
* A --remerge-diff-only option for log/show, similar to --remerge-diff
but also showing how cherry-picks or reverts differed from what an
automatic cherry-pick or revert would provide.
The last three have been implemented already (though only one has been
submitted upstream so far; the others were waiting for performance work
to complete), and I still plan to implement the first one.
=== Performance ===
I'll quote from the summary of my final optimization for merge-ort
(while fixing the testcase name from 'no-renames' to 'few-renames'):
Timings
Infinite
merge- merge- Parallelism
recursive recursive of rename merge-ort
v2.30.0 current detection current
---------- --------- ----------- ---------
few-renames: 18.912 s 18.030 s 11.699 s 198.3 ms
mega-renames: 5964.031 s 361.281 s 203.886 s 661.8 ms
just-one-mega: 149.583 s 11.009 s 7.553 s 264.6 ms
Speedup factors
Infinite
merge- merge- Parallelism
recursive recursive of rename
v2.30.0 current detection merge-ort
---------- --------- ----------- ---------
few-renames: 1 1.05 1.6 95
mega-renames: 1 16.5 29 9012
just-one-mega: 1 13.6 20 565
And, for partial clone users:
Factor reduction in number of objects needed
Infinite
merge- merge- Parallelism
recursive recursive of rename
v2.30.0 current detection merge-ort
---------- --------- ----------- ---------
mega-renames: 1 1 1 181.3
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `--no-walk` flag supports two modes: either it sorts the revisions
given as input input or it doesn't. This is reflected in a single
`no_walk` flag, which reflects one of the three states "walk", "don't
walk but without sorting" and "don't walk but with sorting".
Split up the flag into two separate bits, one indicating whether we
should walk or not and one indicating whether the input should be sorted
or not. This will allow us to more easily introduce a new flag
`--unsorted-input`, which only impacts the sorting bit.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since the "tags", "TAGS" and "cscope.out" targets rely on piping into
xargs with an "echo <list> | xargs" pattern, we need to make sure
we're in an append mode.
Unlike my recent change to make use of ".DELETE_ON_ERROR" in
7b76d6bf221 (Makefile: add and use the ".DELETE_ON_ERROR" flag,
2021-06-29), we really do need the "rm $@+" at the beginning (note,
not "rm $@").
This is because the xargs command may decide to invoke the program
multiple times. We need to make sure we've got a union of its results
at the end.
For "ctags" and "etags" we used the "-a" flag for this, for cscope
that behavior is the default. Its "-u" flag disables its equivalent of
an implicit "-a" flag.
Let's also consistently use the $@ and $@+ names instead of needlessly
hardcoding or referring to more verbose names in the "tags" and "TAGS"
rules.
These targets could perhaps be improved in the future by factoring
this "echo <list> | xargs" pattern so that we make intermediate tags
files for each source file, and then assemble them into one "tags"
file at the end.
The etags manual page suggests that doing that (or perhaps just
--update) might be counter-productive, in any case, the tag building
is fast enough for me, so I'm leaving that for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before we generate a "cscope.out" file, remove that file explicitly,
and not everything matching "cscope*". This doesn't change any
behavior of the Makefile in practice, but makes this rule less
confusing, and consistent with other similar rules.
The cscope target was added in a2a9150bf06 (makefile: Add a cscope
target, 2007-10-06). It has always referred to cscope* instead of to
cscope.out in .gitignore and the "clean" target, even though we only
ever generated a cscope.out file.
This was seemingly done to aid use-cases where someone invoked cscope
with the "-q" flag, which would make it create a "cscope.in.out" and
"cscope.po.out" files in addition to "cscope.out".
But us removing those files we never generated is confusing, so let's
only remove the file we need to, furthermore let's use the "-f" flag
to explicitly name the cscope.out file, even though it's the default
if not "-f" argument is supplied.
It is somewhat inconsistent to change from the glob here but not in
the "clean" rule and .gitignore, an earlier version of this change
updated those as well, but see [1][2] for why they were kept.
1. https://lore.kernel.org/git/87k0lit57x.fsf@evledraar.gmail.com/
2. https://lore.kernel.org/git/87im0kn983.fsf@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --advertise-refs documentation in git-upload-pack added in
9812f2136b3 (upload-pack.c: use parse-options API, 2016-05-31) hasn't
been entirely true ever since v2 support was implemented in
e52449b6722 (connect: request remote refs using v2, 2018-03-15). Under
v2 we don't advertise the refs at all, but rather dump the
capabilities header.
This option has always been an obscure internal implementation detail,
it wasn't even documented for git-receive-pack. Since it has exactly
one user let's rename it to --http-backend-info-refs, which is more
accurate and points the reader in the right direction. Let's also
cross-link this from the protocol v1 and v2 documentation.
I'm retaining a hidden --advertise-refs alias in case there's any
external users of this, and making both options hidden to the bash
completion (as with most other internal-only options).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "advertise capabilities" mode of serve.c added in
ed10cb952d3 (serve: introduce git-serve, 2018-03-15) is only used by
the http-backend.c to call {upload,receive}-pack with the
--advertise-refs parameter. See 42526b478e3 (Add stateless RPC options
to upload-pack, receive-pack, 2009-10-30).
Let's just make cmd_upload_pack() take the two (v2) or three (v2)
parameters the the v2/v1 servicing functions need directly, and pass
those in via the function signature. The logic of whether daemon mode
is implied by the timeout belongs in the v1 function (only used
there).
Once we split up the "advertise v2 refs" from "serve v2 request" it
becomes clear that v2 never cared about those in combination. The only
time it mattered was for v1 to emit its ref advertisement, in that
case we wanted to emit the smart-http-only "no-done" capability.
Since we only do that in the --advertise-refs codepath let's just have
it set "do_done" itself in v1's upload_pack() just before send_ref(),
at that point --advertise-refs and --stateless-rpc in combination are
redundant (the only user is get_info_refs() in http-backend.c), so we
can just pass in --advertise-refs only.
Since we need to touch all the serve() and advertise_capabilities()
codepaths let's rename them to less clever and obvious names, it's
been suggested numerous times, the latest of which is [1]'s suggestion
for protocol_v2_serve_loop(). Let's go with that.
1. https://lore.kernel.org/git/CAFQ2z_NyGb8rju5CKzmo6KhZXD0Dp21u-BbyCb2aNxLEoSPRJw@mail.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --advertise-refs option had no explicit tests of its own, only
other http tests that would fail at a distance if it it was
broken. Let's test its behavior explicitly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The advertise_capabilities() is only called from serve() and we always
emit this version line before it. In a subsequent commit I'll make
builtin/upload-pack.c sometimes call advertise_capabilities()
directly, so it'll make sense to have this line emitted by
advertise_capabilities(), not serve() itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 6b5b6e422ee (serve: advertise session ID in v2 capabilities,
2020-11-11) the check for transfer.advertiseSID was added to the
beginning of the main serve() loop. Thus on startup of the server we'd
populate it.
Let's instead use an explicit lazy initialization pattern in
session_id_advertise() itself, we'll still look the config up only
once per-process, but by moving it out of serve() itself the further
changing of that routine becomes easier.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The serve.c API added in ed10cb952d3 (serve: introduce git-serve,
2018-03-15) was passing in the raw capabilities "keys", but nothing
downstream of it ever used them.
Let's remove that code because it's not needed. If we do end up
needing to pass information about the advertisement in the future
it'll make more sense to have serve.c parse the capabilities keys and
pass the result of its parsing, rather than expecting expecting its
API users to parse the same keys again.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the declaration of the protocol_capability struct to use
designated initializers, this makes this more verbose now, but a
follow-up commit will add a new field. At that point these lines would
be too dense to be on one line comfortably.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the assignments to the various transport_vtables to use
designated initializers, this makes the code easier to read and
maintain.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename the "fetch" member of the transport_vtable to "fetch_refs" for
consistency with the existing "push_refs". Neither of them just push
"refs" but refs and objects, but having the two match makes the code
more readable than having it be inconsistent, especially since
"fetch_refs" is a lot easier to grep for than "fetch".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
