| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The previous commit introduced a --skip flag for cherry-pick and
revert. Update the advice messages, to tell users about this less
cumbersome way of skipping commits. Also add tests to ensure
everything is working fine.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git am or rebase have a --skip flag to skip the current commit if the
user wishes to do so. During a cherry-pick or revert a user could
likewise skip a commit, but needs to use 'git reset' (or in the case
of conflicts 'git reset --merge'), followed by 'git (cherry-pick |
revert) --continue' to skip the commit. This is more annoying and
sometimes confusing on the users' part. Add a `--skip` option to make
skipping commits easier for the user and to make the commands more
consistent.
In the next commit, we will change the advice messages hence finishing
the process of teaching revert and cherry-pick "how to skip commits".
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid using magic numbers for array size and index under `reset_merge`
function. Use `argv_array` instead. This will make code shorter and
easier to extend.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We are on a path to teach cherry-pick/revert how to skip commits. To
achieve this, we could really make use of existing functions.
reset_for_rollback is one such function, but the name does not
intuitively suggest to use it to reset a merge, which it was born to
perform, see 539047c ("revert: introduce --abort to cancel a failed
cherry-pick", 2011-11-23). Change the name to reset_merge to make
it more intuitive.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the case of merge conflicts, while performing a revert, we are
currently advised to use `git cherry-pick --<sequencer-options>`.
Introduce a separate advice message for `git revert`. Also change
the signature of `create_seq_dir` to handle which advice to display
selectively.
Signed-off-by: Rohit Ashiwal <rohit.ashiwal265@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When creating a partial clone, the object filtering criteria is
recorded for the origin of the clone, but this incorrectly used a
hardcoded name "origin" to name that remote; it has been corrected
to honor the "--origin <name>" option.
* xl/record-partial-clone-origin:
clone: respect user supplied origin name when setting up partial clone
|
|
"git request-pull" learned to warn when the ref we ask them to pull
from in the local repository and in the published repository are
different.
* pb/request-pull-verify-remote-ref:
request-pull: warn if the remote object is not the same as the local one
request-pull: quote regex metacharacters in local ref
|
|
The command line to invoke a "git cat-file" command from inside
"git p4" was not properly quoted to protect a caret and running a
broken command on Windows, which has been corrected.
* mm/p4-unshelve-windows-fix:
p4 unshelve: fix "Not a valid object name HEAD0" on Windows
|
|
"git help git" was hard to discover (well, at least for some
people).
* po/git-help-on-git-itself:
Doc: git.txt: remove backticks from link and add git-scm.com/docs
git.c: show usage for accessing the git(1) help page
|
|
A new tutorial targetting specifically aspiring git-core
developers.
* es/first-contrib-tutorial:
doc: add some nit fixes to MyFirstContribution
documentation: add anchors to MyFirstContribution
documentation: add tutorial for first contribution
|
|
Update to Unicode 12.1 width table.
* bb/unicode-12.1-reiwa:
unicode: update the width tables to Unicode 12.1
|
|
"git p4" update.
* sw/git-p4-unshelve-branched-files:
git-p4: allow unshelving of branched files
|
|
The data collected by fsmonitor was not properly written back to
the on-disk index file, breaking t7519 tests occasionally, which
has been corrected.
* js/fsmonitor-unflake:
mark_fsmonitor_valid(): mark the index as changed if needed
fill_stat_cache_info(): prepare for an fsmonitor fix
|
|
Prepare use of reachability index in topological walker that works
on a range (A..B).
* ds/topo-traversal-using-commit-graph:
revision: keep topo-walk free of unintersting commits
revision: use generation for A..B --topo-order queries
|
|
The pattern "git diff/grep" use to extract funcname and words
boundary for Matlab has been extend to cover Octave, which is more
or less equivalent.
* bl/userdiff-octave:
userdiff: fix grammar and style issues
userdiff: add Octave
|
|
"git clone --recurse-submodules" learned to set up the submodules
to ignore commit object names recorded in the superproject gitlink
and instead use the commits that happen to be at the tip of the
remote-tracking branches from the get-go, by passing the new
"--remote-submodules" option.
* ba/clone-remote-submodules:
clone: add `--remote-submodules` flag
|
|
"git merge --squash" is designed to update the working tree and the
index without creating the commit, and this cannot be countermanded
by adding the "--commit" option; the command now refuses to work
when both options are given.
* vv/merge-squash-with-explicit-commit:
merge: refuse --commit with --squash
|
|
"git bundle verify" needs to see if prerequisite objects exist in
the receiving repository, but the command did not check if we are
in a repository upfront, which has been corrected.
* js/bundle-verify-require-object-store:
bundle verify: error out if called without an object database
|
|
Code cleanup.
* js/bisect-helper-check-get-oid-return-value:
bisect--helper: verify HEAD could be parsed before continuing
|
|
"git am -i --resolved" segfaulted after trying to see a commit as
if it were a tree, which has been corrected.
* jk/am-i-resolved-fix:
am: fix --interactive HEAD tree resolution
am: drop tty requirement for --interactive
am: read interactive input from stdin
am: simplify prompt response handling
|
|
The server side support for "git fetch" used to show incorrect
value for the HEAD symbolic ref when the namespace feature is in
use, which has been corrected.
* jk/HEAD-symref-in-xfer-namespaces:
upload-pack: strip namespace from symref data
|
|
"git update-server-info" used to leave stale packfiles in its
output, which has been corrected.
* ew/server-info-remove-crufts:
server-info: do not list unlinked packs
|
|
More parameter validation.
* es/grep-require-name-when-needed:
grep: fail if call could output and name is null
|
|
Doc update.
* es/git-debugger-doc:
doc: hint about GIT_DEBUGGER in CodingGuidelines
|
|
Code cleanup and futureproof.
* ds/object-info-for-prefetch-fix:
sha1-file: split OBJECT_INFO_FOR_PREFETCH
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A "merge -c" instruction during "git rebase --rebase-merges" should
give the user a chance to edit the log message, even when there is
otherwise no need to create a new merge and replace the existing
one (i.e. fast-forward instead), but did not. Which has been
corrected.
* pw/rebase-edit-message-for-replayed-merge:
rebase -r: always reword merge -c
|
|
The way of specifying the path to find dynamic libraries at runtime
has been simplified. The old default to pass -R/path/to/dir has been
replaced with the new default to pass -Wl,-rpath,/path/to/dir,
which is the more recent GCC uses. Those who need to build with an
old GCC can still use "CC_LD_DYNPATH=-R"
* ab/deprecate-R-for-dynpath:
Makefile: remove the NO_R_TO_GCC_LINKER flag
|
|
The ownership rule for the file descriptor to fast-import remote
backend was mixed up, leading to unrelated file descriptor getting
closed, which has been fixed.
* mh/import-transport-fd-fix:
Use xmmap_gently instead of xmmap in use_pack
dup() the input fd for fast-import used for remote helpers
|
|
"git update-server-info" learned not to rewrite the file with the
same contents.
* ew/update-server-info:
update-server-info: avoid needless overwrites
|
|
Improve the code to show args with potential typo that cannot be
interpreted as a commit-ish.
* jk/help-unknown-ref-fix:
help_unknown_ref(): check for refname ambiguity
help_unknown_ref(): duplicate collected refnames
|
|
"git format-patch" learns a configuration to set the default for
its --notes=<ref> option.
* dl/format-patch-notes-config:
format-patch: teach format.notes config option
git-format-patch.txt: document --no-notes option
|
|
"git merge" learned "--quit" option that cleans up the in-progress
merge while leaving the working tree and the index still in a mess.
* nd/merge-quit:
merge: add --quit
merge: remove drop_save() in favor of remove_merge_branch_state()
|
|
Developer support to emulate unsatisfied prerequisites in tests to
ensure that the remainer of the tests still succeeds when tests
with prerequisites are skipped.
* ab/fail-prereqs-in-test:
tests: add a special setup where prerequisites fail
|
|
"git worktree add" used to fail when another worktree connected to
the same repository was corrupt, which has been corrected.
* nd/corrupt-worktrees:
worktree add: be tolerant of corrupt worktrees
|
|
Update supporting parts of "git rebase" to remove code that should
no longer be used.
* js/rebase-cleanup:
rebase: fold git-rebase--common into the -p backend
sequencer: the `am` and `rebase--interactive` scripts are gone
.gitignore: there is no longer a built-in `git-rebase--interactive`
t3400: stop referring to the scripted rebase
Drop unused git-rebase--am.sh
|
|
In recent versions of Git, per-worktree refs are exposed in
refs/worktrees/<wtname>/ hierarchy, which means that worktree names
must be a valid refname component. The code now sanitizes the names
given to worktrees, to make sure these refs are well-formed.
* nd/worktree-name-sanitization:
worktree add: sanitize worktree names
|
|
The "git fast-export/import" pair has been taught to handle commits
with log messages in encoding other than UTF-8 better.
* en/fast-export-encoding:
fast-export: do automatic reencoding of commit messages only if requested
fast-export: differentiate between explicitly UTF-8 and implicitly UTF-8
fast-export: avoid stripping encoding header if we cannot reencode
fast-import: support 'encoding' commit header
t9350: fix encoding test to actually test reencoding
|
|
* jk/unused-params-final-batch:
verify-commit: simplify parameters to run_gpg_verify()
show-branch: drop unused parameter from show_independent()
rev-list: drop unused void pointer from finish_commit()
remove_all_fetch_refspecs(): drop unused "remote" parameter
receive-pack: drop unused "commands" from prepare_shallow_update()
pack-objects: drop unused rev_info parameters
name-rev: drop unused parameters from is_better_name()
mktree: drop unused length parameter
wt-status: drop unused status parameter
read-cache: drop unused parameter from threaded load
clone: drop dest parameter from copy_alternates()
submodule: drop unused prefix parameter from some functions
builtin: consistently pass cmd_* prefix to parse_options
cmd_{read,write}_tree: rename "unused" variable that is used
|
|
The "--base" option of "format-patch" computed the patch-ids for
prerequisite patches in an unstable way, which has been updated to
compute in a way that is compatible with "git patch-id --stable".
* sb/format-patch-base-patch-id-fix:
format-patch: make --base patch-id output stable
format-patch: inform user that patch-id generation is unstable
|
|
A relative pathname given to "git init --template=<path> <repo>"
ought to be relative to the directory "git init" gets invoked in,
but it instead was made relative to the repository, which has been
corrected.
* nd/init-relative-template-fix:
init: make --template path relative to $CWD
|
|
Since "git send-email" learned to take 'auto' as the value for the
transfer-encoding, it by mistake stopped honoring the values given
to the configuration variables sendemail.transferencoding and/or
sendemail.<ident>.transferencoding. This has been corrected to
(finally) redoing the order of setting the default, reading the
configuration and command line options.
* ab/send-email-transferencoding-fix:
send-email: fix regression in sendemail.identity parsing
send-email: document --no-[to|cc|bcc]
send-email: fix broken transferEncoding tests
send-email: remove cargo-culted multi-patch pattern in tests
send-email: do defaults -> config -> getopt in that order
send-email: rename the @bcclist variable for consistency
send-email: move the read_config() function above getopts
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
l10n-2.22.0-rnd3
* tag 'l10n-2.22.0-rnd3' of git://github.com/git-l10n/git-po: (25 commits)
l10n: fr.po: Review French translation
l10n: de.po: Update German translation
l10n: de.po: improve description of 'git reset --quiet'
l10n: TEAMS: Change German translation team leader
l10n: bg.po: Updated Bulgarian translation (4581t)
l10n: zh_CN: Revision for git v2.22.0 l10n
l10n: zh_CN: for git v2.22.0 l10n round 1~3
l10n: es: 2.22.0 round 3
l10n: it.po: Updated Italian translation
l10n: fr v2.22.0 rnd 3
l10n: vi.po(4581t): Updated Vietnamese translation for v2.22.0 round 3
l10n: git.pot: v2.22.0 round 3 (3 new, 2 removed)
l10n: es: 2.22.0 round 2
l10n: bg.po: Updated Bulgarian translation (4580t)
l10n: vi.po(4580t): Updated Vietnamese translation for v2.22.0 round 2
l10n: fr.po v2.22.0 round 2
l10n: git.pot: v2.22.0 round 2 (6 new, 3 removed)
l10n: bg.po: Updated Bulgarian translation (4577t)
l10n: es: 2.22.0 round 1
l10n: vi.po(4577t): Updated Vietnamese translation for v2.22.0 round 1
...
|
|
* 'fr_review' of git://github.com/jnavila/git:
l10n: fr.po: Review French translation
|
|
* 'master' of git://github.com/alshopov/git-po:
l10n: bg.po: Updated Bulgarian translation (4581t)
|
|
Signed-off-by: Cédric Malard <c.malard-git@valdun.net>
Signed-off-by: Jean-Noel Avila <jn.avila@free.fr>
|
|
Recent code restructuring of merge-recursive engine introduced a
regression dealing with rename/add conflict.
* en/merge-directory-renames-fix:
merge-recursive: restore accidentally dropped setting of path
|
|
Reviewed-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Matthias Rüster <matthias.ruester@gmail.com>
|
|
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
|
|
Acked-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Matthias Rüster <matthias.ruester@gmail.com>
|
|
In commit 8daec1df03de ("merge-recursive: switch from (oid,mode) pairs
to a diff_filespec", 2019-04-05), we actually switched from
(oid,mode,path) triplets to a diff_filespec -- but most callsites in the
patch only needed to worry about oid and mode so the commit message
focused on that. The oversight in the commit message apparently spilled
over to the code as well; one of the dozen or so callsites accidentally
dropped the setting of the path in the conversion. Restore the path
setting in that location.
Also, this pointed out that our testsuite was lacking a good rename/add
test, at least one that involved the need for merge content with the
rename. Add such a test, and since rename/add vs. add/rename could
possibly be important, redo the merge the opposite direction to make
sure we don't have issues with the direction of the merge. These
testcases failed before restoring the setting of path, but with the
paths appropriately set the testcases both pass.
Reported-by: Ben Humphreys <behumphreys@atlassian.com>
Based-on-patch-by: SZEDER Gábor <szeder.dev@gmail.com>
Tested-by: Ben Humphreys <behumphreys@atlassian.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
Revise 51 translations, improving consistency for some phrased.
Update email address for Fangyi Zhou
Signed-off-by: Fangyi Zhou <me@fangyi.io>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
Translate 274 new messages (4581t0f0u) for git 2.22.0.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* '2.22' of https://github.com/ChrisADR/git-po:
l10n: es: 2.22.0 round 3
|
|
* 'it-l10n-wip' of github.com:AlessandroMenti/git-po:
l10n: it.po: Updated Italian translation
|
|
Signed-off-by: Christopher Diaz Riveros <chrisadr@gentoo.org>
|
|
Signed-off-by: Alessandro Menti <alessandro.menti@alessandromenti.it>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
|
|
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
|
Generate po/git.pot from v2.22.0-rc3 for git v2.22.0 l10n round 3.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'master' of git://git.kernel.org/pub/scm/git/git:
Git 2.22-rc3
i18n: fix typos found during l10n for git 2.22.0
RelNotes: minor typo fixes in 2.22.0 draft
list-objects-filter: disable 'sparse:path' filters
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Disable "--filter=sparse:path=<path>" that would allow reading from
paths on the filesystem.
* cc/list-objects-filter-wo-sparse-path:
list-objects-filter: disable 'sparse:path' filters
|
|
Fix two typos introduced by the following commits:
+ 31fba9d3b4 (diff-parseopt: convert --[src|dst]-prefix, 2019-03-24)
+ ed8b4132c8 (remote-curl: mark all error messages for translation,
2019-03-05)
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christopher Diaz Riveros <chrisadr@gentoo.org>
|
|
* 'master' of https://github.com/vnwildman/git:
l10n: vi.po(4580t): Updated Vietnamese translation for v2.22.0 round 2
|
|
* 'master' of git://github.com/alshopov/git-po:
l10n: bg.po: Updated Bulgarian translation (4580t)
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
|
|
Generate po/git.pot from v2.22.0-rc2 for git v2.22.0 l10n round 2.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
|
|
* 'master' of git://git.kernel.org/pub/scm/git/git: (66 commits)
Git 2.22-rc2
...
|
|
* 'master' of https://github.com/Softcatala/git-po:
l10n: Update Catalan translation
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/rebase-config-bitfix:
rebase: replace incorrect logical negation by correct bitwise one
|
|
Doc markup fix.
* es/doc-gitsubmodules-markup:
gitsubmodules: align html and nroff lists
|
|
Typofix.
* ja/diff-opt-typofix:
diff: fix mistake in translatable strings
|
|
A brown-paper-bag bugfix to a change already in 'master'.
* jt/clone-server-option:
fetch-pack: send server options after command
|
|
A brown-paper-bag bugfix to a change already in 'master'.
* sg/progress-off-by-one-fix:
progress: avoid empty line when breaking the progress line
|
|
A bit more leftover clean-up to deprepcate "rebase -p".
* js/rebase-deprecate-preserve-merges:
rebase docs: recommend `-r` over `-p`
docs: say that `--rebase=preserve` is deprecated
tests: mark a couple more test cases as requiring `rebase -p`
|
|
Rename environment variables that are used to control the "trace2"
mechanism to a more readable name.
* sg/trace2-rename:
trace2: document the supported values of GIT_TRACE2* env variables
trace2: rename environment variables to GIT_TRACE2*
|
|
* jh/trace2:
trace2: fix tracing when NO_PTHREADS is defined
|
|
A brown-paper-bag bugfix to a change already in 'master'.
* nd/diff-parseopt:
parse-options: check empty value in OPT_INTEGER and OPT_ABBREV
diff-parseopt: restore -U (no argument) behavior
diff-parseopt: correct variable types that are used by parseopt
|
|
Signed-off-by: Xin Li <delphij@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that Unicode 12.1 has been announced[0], update the character
width tables to the new version.
[0] http://blog.unicode.org/2019/05/unicode-12-1-en.html
Signed-off-by: Beat Bolli <dev+git@drbeat.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A trial run-through of the tutorial revealed a few typos and missing
commands in the tutorial itself. This commit fixes typos, clarifies
which lines to keep or modify in some places, and adds a section on
putting the git-psuh binary into the gitignore.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If someone wants to use as a filter a sparse file that is in the
repository, something like "--filter=sparse:oid=<ref>:<path>"
already works.
So 'sparse:path' is only interesting if the sparse file is not in
the repository. In this case though the current implementation has
a big security issue, as it makes it possible to ask the server to
read any file, like for example /etc/password, and to explore the
filesystem, as well as individual lines of files.
If someone is interested in using a sparse file that is not in the
repository as a filter, then at the minimum a config option, such
as "uploadpack.sparsePathFilter", should be implemented first to
restrict the directory from which the files specified by
'sparse:path' can be read.
For now though, let's just disable 'sparse:path' filters.
Helped-by: Matthew DeVore <matvore@google.com>
Helped-by: Jeff Hostetler <git@jeffhostetler.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When parsing the argument for OPT_INTEGER and OPT_ABBREV, we check if we
can parse the entire argument to a number with "if (*s)". There is one
missing check: if "arg" is empty to begin with, we fail to notice.
This could happen with long option by writing like
git diff --inter-hunk-context= blah blah
Before 16ed6c97cc (diff-parseopt: convert --inter-hunk-context,
2019-03-24), --inter-hunk-context is handled by a custom parser
opt_arg() and does detect this correctly.
This restores the bahvior for --inter-hunk-context and make sure all
other integer options are handled the same (sane) way. For OPT_ABBREV
this is new behavior. But it makes it consistent with the rest.
PS. OPT_MAGNITUDE has similar code but git_parse_ulong() does detect
empty "arg". So it's good to go.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before d473e2e0e8 (diff.c: convert -U|--unified, 2019-01-27), -U and
--unified are implemented with a custom parser opt_arg() in diff.c. I
didn't check this code carefully and not realize that it's the
equivalent of PARSE_OPT_NONEG | PARSE_OPT_OPTARG.
In other words, if -U is specified without any argument, the option
should be accepted, and the default value should be used. Without
PARSE_OPT_OPTARG, parse_options() will reject this case and cause a
regression.
Reported-by: Bryan Turner <bturner@atlassian.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most number-related OPT_ macros store the value in an 'int'
variable. Many of the variables in 'struct diff_options' have a
different type, but during the conversion to using parse_options() I
failed to notice and correct.
The problem was reported on s360x which is a big-endian
architechture. The variable to store '-w' option in this case is
xdl_opts, 'long' type, 8 bytes. But since parse_options() assumes
'int' (4 bytes), it will store bits in the wrong part of xdl_opts. The
problem was found on little-endian platforms because parse_options()
will accidentally store at the right part of xdl_opts.
There aren't much to say about the type change (except that 'int' for
xdl_opts should still be big enough, since Windows' long is the same
size as 'int' and nobody has complained so far). Some safety checks may
be implemented in the future to prevent class of bugs.
Reported-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a regression in my recent 3494dfd3ee ("send-email: do defaults ->
config -> getopt in that order", 2019-05-09). I missed that the
$identity variable needs to be extracted from the command-line before
we do the config reading, as it determines which config variable we
should read first. See [1] for the report.
The sendemail.identity feature was added back in
34cc60ce2b ("send-email: Add support for SSL and SMTP-AUTH",
2007-09-03), there were no tests to assert that it worked properly.
So let's fix both the regression, and add some tests to assert that
this is being parsed properly. While I'm at it I'm adding a
--no-identity option to go with --[to|cc|bcc] variable, since the
semantics are similar. It's like to/cc/bcc except that unlike those we
don't support multiple identities, but we could now easily add it
support for it if anyone cares.
In just fixing the --identity command-line parsing bug I discovered
that a narrow fix to that wouldn't do. In read_config() we had a state
machine that would only set config values if they weren't set already,
and thus by proxy we wouldn't e.g. set "to" based on sendemail.to if
we'd seen sendemail.gmail.to before, with --identity=gmail.
I'd modified some of the relevant code in 3494dfd3ee, but just
reverting to that wouldn't do, since it would bring back the
regression fixed in that commit.
Refactor read_config() do what we actually mean here. We don't want to
set a given sendemail.VAR if a sendemail.$identity.VAR previously set
it. The old code was conflating this desire with the hardcoded
defaults for these variables, and as discussed in 3494dfd3ee that was
never going to work. Instead pass along the state of whether an
identity config set something before, as distinguished from the state
of the default just being false, or the default being a non-bool or
true (e.g. --transferencoding).
I'm still not happy with the test coverage here, e.g. there's nothing
testing sendemail.smtpEncryption, but I only have so much time to fix
this code.
1. https://public-inbox.org/git/5cddeb61.1c69fb81.47ed4.e648@mx.google.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Boxuan Li <liboxuan@connect.hku.hk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'master' of git://github.com/alshopov/git-po:
l10n: bg.po: Updated Bulgarian translation (4577t)
|
|
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
|
|
We check for a handy environment variable GIT_DEBUGGER when running via
bin-wrappers/, but this feature is undocumented. Add a hint to how to
use it into the CodingGuidelines (which is where other useful
environment settings like DEVELOPER are documented).
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git p4 unshelve was failing with these errors:
fatal: Not a valid object name HEAD0
Command failed: git cat-file commit HEAD^0
(git version 2.21.0.windows.1, python 2.7.16)
The pOpen call used by git-p4 to invoke the git command can take either a
string or an array as a first argument. The array form is preferred
because platform-specific escaping of special characters will be
handled automatically.(https://docs.python.org/2/library/subprocess.html)
The extractLogMessageFromGitCommit method was, however, using the string
form and so the caret (^) character in the HEAD^0 argument was not being
escaped on Windows. The caret happens to be the escape character, which
is why the git command was receiving HEAD0.
The behaviour can be confirmed by typing ECHO HEAD^0 at the command-
prompt, which emits HEAD0.
The solution is simply to use the array format of passing the command to
fOpen, which is recommended and used in other parts of this code anyway.
Signed-off-by: Mike Mueller <mike.mueller@moodys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The OBJECT_INFO_FOR_PREFETCH bitflag was added to sha1-file.c in 0f4a4fb1
(sha1-file: support OBJECT_INFO_FOR_PREFETCH, 2019-03-29) and is used to
prevent the fetch_objects() method when enabled.
However, there is a problem with the current use. The definition of
OBJECT_INFO_FOR_PREFETCH is given by adding 32 to OBJECT_INFO_QUICK. This is
clearly stated above the definition (in a comment) that this is so
OBJECT_INFO_FOR_PREFETCH implies OBJECT_INFO_QUICK. The problem is that using
"flag & OBJECT_INFO_FOR_PREFETCH" means that OBJECT_INFO_QUICK also implies
OBJECT_INFO_FOR_PREFETCH.
Split out the single bit from OBJECT_INFO_FOR_PREFETCH into a new
OBJECT_INFO_SKIP_FETCH_OBJECT as the single bit and keep
OBJECT_INFO_FOR_PREFETCH as the union of two flags. This allows a clearer use
of flag checking while also keeping the implication of OBJECT_INFO_QUICK.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `--preserve-merges` option is now deprecated in favor of
`--rebase-merges`; Let's stop recommending the former.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As of Git v2.22.0, the `--preserve-merges` backend of `git rebase` will
be officially deprecated in favor of the `--rebase-merges` backend.
Consequently, `git pull --rebase=preserve` will also be deprected. State
this explicitly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `--preserve-merges` option has been deprecated, and as a consequence
we started to mark test cases that require that option to be supported,
in preparation for removing that support eventually.
Since we marked those test cases, a couple more crept into the test
suite, and with this patch, we mark them, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some cases, git request-pull might be invoked with remote and
local objects that differ even though they point to the same commit.
For example, the remote object might be a lightweight tag
vs. an annotated tag on the local side; or the user might have
reworded the tag locally and forgotten to push it.
When this happens git-request-pull will not warn, because it only
checks that "git ls-remote" returns an SHA1 that matches the local
commit (known as $headrev in the script). This patch makes
git-request-pull retrieve the tag object SHA1 while processing
the "git ls-remote" output, so that it can be matched against the
local object.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The local part of the third argument of git-request-pull is used in
a regular expression without quoting it. Use qr{} and \Q\E to ensure
that e.g. a period in a tag name does not match any character on the
remote side.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The deal with bundles is: they really are thin packs, with very little
sugar on top. So we really need a repository (or more appropriately, an
object database) to work with, when asked to verify a bundle.
Let's error out with a useful error message if `git bundle verify` is
called without such an object database to work with.
Reported by Konstantin Ryabitsev.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Without this bug fix, t7519's four "status doesn't detect unreported
modifications" test cases would fail occasionally (and, oddly enough,
*a lot* more frequently on Windows).
The reason is that these test cases intentionally use the side effect of
`git status` to re-write the index if any updates were detected: they
first clean the worktree, run `git status` to update the index as well
as show the output to the casual reader, then make the worktree dirty
again and expect no changes to reported if running with a mocked
fsmonitor hook.
The problem with this strategy was that the index was written during
said `git status` on the clean worktree for the *wrong* reason: not
because the index was marked as changed (it wasn't), but because the
recorded mtimes were racy with the index' own mtime.
As the mtime granularity on Windows is 100 nanoseconds (see e.g.
https://docs.microsoft.com/en-us/windows/desktop/SysInfo/file-times),
the mtimes of the files are often enough *not* racy with the index', so
that that `git status` call currently does not always update the index
(including the fsmonitor extension), causing the test case to fail.
The obvious fix: if we change *any* index entry's `CE_FSMONITOR_VALID`
flag, we should also mark the index as changed. That will cause the
index to be written upon `git status`, *including* an updated fsmonitor
extension.
Side note: Even though the reader might think that the t7519 issue
should be *much* more prevalent on Linux, given that the ext4 filesystem
(that seems to be used by every Linux distribution) stores mtimes in
nanosecond precision. However, ext4 uses `current_kernel_time()` (see
https://unix.stackexchange.com/questions/11599#comment762968_11599; it
is *amazingly* hard to find any proper source of information about such
ext4 questions) whose accuracy seems to depend on many factors but is
safely worse than the 100-nanosecond granularity of NTFS (again, it is
*horribly* hard to find anything remotely authoritative about this
question). So it seems that the racy index condition that hid the bug
fixed by this patch simply is a lot more likely on Linux than on
Windows. But not impossible ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We will need to pass down the `struct index_state` to
`mark_fsmonitor_valid()` for an upcoming bug fix, and this here function
calls that there function, so we need to extend the signature of
`fill_stat_cache_info()` first.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert option_commit to tristate, representing the states of
'default/untouched', 'enabled-by-cli', 'disabled-by-cli'. With this in
place, check whether option_commit was enabled by cli when squashing a
merge. If so, error out, as this is not supported.
Previously, when --squash was supplied, 'option_commit' was silently
dropped. This could have been surprising to a user who tried to override
the no-commit behavior of squash using --commit explicitly.
Add a note to the --squash option for git-merge to clarify the
incompatibility, and add a test case to t7600-merge.sh
Cc: Junio C Hamano <gitster@pobox.com>
Cc: Rafael Ascensão <rafa.almas@gmail.com>
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Vishal Verma <vishal@stellar.sh>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Having non-existent packs in objects/info/packs causes
dumb HTTP clients to abort.
v2: use single loop with ALLOC_GROW as suggested by Jeff King
Signed-off-by: Eric Wong <e@80x24.org>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, if any server options are specified during a protocol v2
fetch, server options will be sent before "command=fetch". Write server
options to the request buffer in send_fetch_request() so that the
components of the request are sent in the correct order.
The protocol documentation states that the command must come first. The
Git server implementation in serve.c (see process_request() in that
file) tolerates any order of command and capability, which is perhaps
why we haven't noticed this. This was noticed when testing against a
JGit server implementation, which follows the documentation in this
regard.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
grep_source(), which performs much of the work for Git's grep library,
allows passing an arbitrary struct grep_source which represents the text
which grep_source() should search to match a pattern in the provided
struct grep_opt. In most callers, the grep_source::name field is set to
an appropriate prefix to print before a colon when a result matches:
README:Git is an Open Source project covered by the GNU General
One caller, grep_buffer(), leaves the grep_source::name field set to
NULL because there isn't enough context to determine an appropriate name
for this kind of output line. In practice, this has been fine: the only
caller of grep_buffer() is "git log --grep", and that caller sets
grep_opt::status_only, which disables output and only checks whether a
match exists. But this is brittle: a future caller can call
grep_buffer() without grep_opt::status_only set, and as soon as it hits
a match, grep_source() will try to print the match and segfault:
(null):Git is an Open Source project covered by the GNU General
For example, a future caller might want to print all matching lines from
commits which match a regex.
Futureproof by diagnosing early a use of the API that could trigger that
condition, before we know whether the pattern matches:
BUG: grep.c:1783: grep call which could print a name requires
grep_source.name be non-NULL
Aborted
This way, the caller's author gets an indication of how to fix the issue
- by providing grep_source::name or setting grep_opt::status_only - and
they are warned of the potential for a segfault unconditionally, rather
than only if there is a match.
Noticed while adding such a call to a tutorial on revision walks.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When unshelving a changelist, git-p4 tries to work out the appropriate
parent commit in a given branch (default: HEAD). To do this, it looks
at the state of any pre-existing files in the target Perforce branch,
omitting files added in the shelved changelist. Currently, only files
added (or move targets) are classed as new. However, files integrated
from other branches (i.e. a 'branch' action) also need to be considered
as added, for this purpose.
Signed-off-by: Simon Williams <simon@no-dns-yet.org.uk>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach trace2 TLS code to not rely on pthread_getspecific() when NO_PTHREADS
is defined. Instead, always assume the context data of the main thread.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 06f5608c14e6 (bisect--helper: `bisect_start` shell function partially
in C, 2019-01-02), we introduced a call to `get_oid()` and did not check
whether it succeeded before using its output.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In bff014dac7d9 (builtin rebase: support the `verbose` and `diffstat`
options, 2018-09-04), we added a line that wanted to remove the
`REBASE_DIFFSTAT` bit from the flags, but it used an incorrect negation.
Found by Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When updating the topo-order walk in b454241 (revision.c: generation-based
topo-order algorithm, 2018-11-01), the logic was a huge rewrite of the
walk logic. In that massive change, we accidentally included the
UNINTERESTING commits in expand_topo_walk(). This means that a simple
query like
git rev-list --topo-order HEAD~1..HEAD
will expand the topo walk for all commits reachable from HEAD, and not
just one commit.
This change should speed up these cases, but there is still a need
for corrected commit-date for some A..B queries.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a commit-graph exists with computed generation numbers, then a
'git rev-list --topo-order -n <N> <rev>' query will use those generation
numbers to reduce the number of commits walked before writing N commits.
One caveat put in b454241 (revision.c: generation-based topo-order
algorithm, 2018-11-01) was to not enable the new algorithm for queries
with a revision range "A..B". The logic was placed to walk from "A" and
mark those commits as uninteresting, but the performance was actually
worse than the existing logic in some cases.
The root cause of this performance degradation is that generation
numbers _increase_ the number of commits we walk relative to the
existing heuristic of walking by commit date. While generation numbers
actually guarantee that the algorithm is correct, the existing logic
is very rarely wrong and that added requirement is not worth the cost.
This motivates the planned "corrected commit date" to replace
generation numbers in a future version of Git.
The current change enables the logic to use whatever reachability
index is currently in the commit-graph (generation numbers or
corrected commit date).
The limited flag in struct rev_info forces a full walk of the
commit history (after discovering the A..B range). Previosuly, it
is enabled whenever we see an uninteresting commit. We prevent
enabling the parameter when we are planning to use the reachability
index for a topo-order.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In --interactive mode, "git am --resolved" will try to generate a patch
based on what is in the index, so that it can prompt "apply this
patch?". To do so it needs the tree of HEAD, which it tries to get with
get_oid_tree(). However, this doesn't yield a tree object; the "tree"
part just means "if you must disambiguate short oids, then prefer trees"
(and we do not need to disambiguate at all, since we are feeding a ref).
Instead, we must parse the oid as a commit (which should always be true
in a non-corrupt repository), and access its tree pointer manually.
This has been broken since the conversion to C in 7ff2683253
(builtin-am: implement -i/--interactive, 2015-08-04), but there was no
test coverage because of interactive-mode's insistence on having a tty.
That was lifted in the previous commit, so we can now add a test for
this case.
Note that before this patch, the test would result in a BUG() which
comes from 3506dc9445 (has_uncommitted_changes(): fall back to empty
tree, 2018-07-11). But before that, we'd have simply segfaulted (and in
fact this is the exact type of case the BUG() added there was trying to
catch!).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have required that the stdin of "am --interactive" be a tty since
a1451104ac (git-am: interactive should fail gracefully., 2005-10-12).
However, this isn't strictly necessary, and makes the tool harder to
test (and is unlike all of our other --interactive commands).
The goal of that commit was to make sure that somebody does not do:
git am --interactive <mbox
and cause us to read commands from the mbox. But we can simply check
up front for this case and complain before entering the interactive
loop.
Technically this disallows:
git am --interactive </dev/null
where our lack of patches means we would never prompt for anything, and
so the old code would not notice our lack of tty (and now we'd die
early). But since such a command is totally pointless, it's no loss.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the conversion of git-am from shell script to C, we switched to using
git_prompt(). Unlike the original shell command "read reply", this
doesn't read from stdin at all, but rather from /dev/tty.
In most cases this distinction wouldn't matter. We require (as the shell
script did) that stdin is a tty, so they would generally be the same
thing. But one important exception is our test suite: even with
test_terminal, we cannot test "am --interactive" because it insists on
reading from /dev/tty, not the pseudo-tty we've set up in the test
script.
Fixing this clears the way to adding tests in a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We'll never see a NULL returned from git_prompt(); if it can't produce
any input for us (e.g., because the terminal got EOF) then it will just
die().
So there's no need for us to handle NULL here. And even if there was, it
doesn't make sense to continue; on a true terminal hangup we'd just loop
infinitely trying to get input that will never come.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since commit 545dc345eb (progress: break too long progress bar lines,
2019-04-12) when splitting a too long progress line, sometimes it
looks as if a superfluous empty line were added between the title
line and the counters.
To make sure that the previously displayed progress line is completely
covered up when writing the new, shorter title line, we calculate how
many characters need to be overwritten with spaces. Alas, this
calculation doesn't account for the newline character at the end of
the new title line, and resulted in printing one more space than
strictly necessary. This extra space character doesn't matter, if the
length of the previous progress line was shorter than the width of the
terminal. However, if the previous line matched the terminal width,
then this extra space made the new line longer, effectively adding
that empty line after the title line.
Fix this off-by-one to avoid that spurious empty line.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The descriptions of the GIT_TRACE2* environment variables link to the
technical docs for further details on the supported values. However,
a link like this only really works if the docs are viewed in a browser
and the full documentation is available. OTOH, in 'man git' there are
no links to conveniently click on, and distro-shipped git packages
tend to include only the man pages, while the technical docs and the
docs in html format are in a separate 'git-doc' package.
So let's describe the supported values to make the manpage more
self-contained, but still keep the references to the technical docs
because the details of the SID, and the JSON and perf output formats
are definitely beyond the scope of 'man git'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For an environment variable that is supposed to be set by users, the
GIT_TR2* env vars are just too unclear, inconsistent, and ugly.
Most of the established GIT_* environment variables don't use
abbreviations, and in case of the few that do (GIT_DIR,
GIT_COMMON_DIR, GIT_DIFF_OPTS) it's quite obvious what the
abbreviations (DIR and OPTS) stand for. But what does TR stand for?
Track, traditional, trailer, transaction, transfer, transformation,
transition, translation, transplant, transport, traversal, tree,
trigger, truncate, trust, or ...?!
The trace2 facility, as the '2' suffix in its name suggests, is
supposed to eventually supercede Git's original trace facility. It's
reasonable to expect that the corresponding environment variables
follow suit, and after the original GIT_TRACE variables they are
called GIT_TRACE2; there is no such thing is 'GIT_TR'.
All trace2-specific config variables are, very sensibly, in the
'trace2' section, not in 'tr2'.
OTOH, we don't gain anything at all by omitting the last three
characters of "trace" from the names of these environment variables.
So let's rename all GIT_TR2* environment variables to GIT_TRACE2*,
before they make their way into a stable release.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 7171d8c15f (upload-pack: send symbolic ref information as
capability, 2013-09-17), we've sent cloning and fetching clients special
information about which branch HEAD is pointing to, so that they don't
have to guess based on matching up commit ids.
However, this feature has never worked properly with the GIT_NAMESPACE
feature. Because upload-pack uses head_ref_namespaced(find_symref), we
do find and report on refs/namespaces/foo/HEAD instead of the actual
HEAD of the repo. This makes sense, since the branch pointed to by the
top-level HEAD may not be advertised at all. But we do two things wrong:
1. We report the full name refs/namespaces/foo/HEAD, instead of just
HEAD. Meaning no client is going to bother doing anything with that
symref, since we're not otherwise advertising it.
2. We report the symref destination using its full name (e.g.,
refs/namespaces/foo/refs/heads/master). That's similarly useless to
the client, who only saw "refs/heads/master" in the advertisement.
We should be stripping the namespace prefix off of both places (which
this patch fixes).
Likely nobody noticed because we tend to do the right thing anyway. Bug
(1) means that we said nothing about HEAD (just refs/namespace/foo/HEAD).
And so the client half of the code, from a45b5f0552 (connect: annotate
refs with their symref information in get_remote_head(), 2013-09-17),
does not annotate HEAD, and we use the fallback in guess_remote_head(),
matching refs by object id. Which is usually right. It only falls down
in ambiguous cases, like the one laid out in the included test.
This also means that we don't have to worry about breaking anybody who
was putting pre-stripped names into their namespace symrefs when we fix
bug (2). Because of bug (1), nobody would have been using the symref we
advertised in the first place (not to mention that those symrefs would
have appeared broken for any non-namespaced access).
Note that we have separate fixes here for the v0 and v2 protocols. The
symref advertisement moved in v2 to be a part of the ls-refs command.
This actually gets part (1) right, since the symref annotation
piggy-backs on the existing ref advertisement, which is properly
stripped. But it still needs a fix for part (2). The included tests
cover both protocols.
Reported-by: Bryan Turner <bturner@atlassian.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There appears to be a bug in the toolchain generating manpages from
lettered lists. When a list is enumerated with letters, the resulting
nroff shows numbers instead. Mostly this is harmless, but in the case of
gitsubmodules, the paragraph following the list refers back to each
bullet by letter. As a result, reading this documentation via `man
gitsubmodules` is hard to parse - readers must infer that a bug exists
and a refers to 1, b refers to 2, and c refers to 3 in the list above.
The problem specifically was introduced in ad47194; previously rather
than generating numerated lists the bulleted area was entirely
monospaced in HTML and shown in plaintext in nroff.
The bug seems to exist in docbook-xml - I've reported it on May 1 via
the docbook-apps mail list - but for now it may make more sense to just
work around the issue.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christopher Diaz Riveros <chrisadr@gentoo.org>
|
|
When using `git clone --recurse-submodules` there was previously no way to
pass a `--remote` switch to the implicit `git submodule update` command for
any use case where you want the submodules to be checked out on their
remote-tracking branch rather than with the SHA-1 recorded in the superproject.
This patch rectifies this situation. It actually passes `--no-fetch` to
`git submodule update` as well on the grounds they the submodule has only just
been cloned, so fetching from the remote again only serves to slow things down.
Signed-off-by: Ben Avison <bavison@riscosopen.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'master' of https://github.com/vnwildman/git:
l10n: vi.po(4577t): Updated Vietnamese translation for v2.22.0 round 1
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "--dir-diff" mode of "git difftool" is not useful in "--no-index"
mode; they are now explicitly marked as mutually incompatible.
* js/difftool-no-index:
difftool --no-index: error out on --dir-diff (and don't crash)
|
|
The codepath to parse :<path> that obtains the object name for an
indexed object has been made more robust.
* jk/get-oid-indexed-object-name:
get_oid: handle NULL repo->index
|
|
Code clean-up.
* jc/set-packet-header-signature-fix:
pkt-line: drop 'const'-ness of a param to set_packet_header()
|
|
Code clean-up.
* cb/http-push-null-in-message-fix:
http-push: prevent format overflow warning with gcc >= 9
|
|
Doc update.
* js/stash-in-c-use-builtin-doc:
stash: document stash.useBuiltin
|
|
A prerequiste check in the test suite to see if a working jgit is
available was made more robust.
* tz/test-lib-check-working-jgit:
test-lib: try harder to ensure a working jgit
|
|
Code clean-up.
* js/parseopt-unknown-cb-returns-an-enum:
parse-options: adjust `parse_opt_unknown_cb()`s declared return type
|
|
Update collision-detecting SHA-1 code to build properly on HP-UX.
* ab/sha1dc:
sha1dc: update from upstream
|
|
The fsmonitor interface got out of sync after the in-core index
file gets discarded, which has been corrected.
* js/fsmonitor-refresh-after-discarding-index:
fsmonitor: force a refresh after the index was discarded
fsmonitor: demonstrate that it is not refreshed after discard_index()
|
|
"git status" did not know that the "label" instruction in the
todo-list "rebase -i -r" uses should not be shown as a hex object
name.
* js/rebase-i-label-shown-in-status-fix:
status: fix display of rebase -ir's `label` command
|
|
Developer support update.
* es/check-non-portable-pre-5.10:
check-non-portable-shell: support Perl versions older than 5.10
|
|
Doc update.
* ds/trace2-document-env-vars:
trace2: add variable description to git.txt
|
|
A stale in-code comment has been updated.
* cm/notes-comment-fix:
notes: correct documentation of format_display_notes()
|
|
Code cleanup.
* tt/no-ipv6-fallback-for-winxp:
mingw: remove obsolete IPv6-related code
|
|
An additional test for MinGW
* js/t5580-unc-alternate-test:
t5580: verify that alternates can be UNC paths
|
|
"git cvsexportcommit" running on msys did not expect cvsnt showed
"cvs status" output with CRLF line endings.
* ds/cvsexportcommit-force-text:
cvsexportcommit: force crlf translation
|
|
To run tests for Git SVN, our scripts for CI used to install the
git-svn package (in the hope that it would bring in the right
dependencies). This has been updated to install the more direct
dependency, namely, libsvn-perl.
* sg/ci-libsvn-perl:
ci: install 'libsvn-perl' instead of 'git-svn'
|
|
Avoid patterns to pipe output from a git command to feed another
command in tests.
* bl/t4253-exit-code-from-format-patch:
t4253-am-keep-cr-dos: avoid using pipes
|
|
The code to generate the multi-pack idx file was not prepared to
see too many packfiles and ran out of open file descriptor, which
has been corrected.
* ds/midx-too-many-packs:
midx: add packs to packed_git linked list
midx: pass a repository pointer
|
|
On a filesystem like HFS+, the names of the refs stored as filesystem
entities may become different from what the end-user expects, just
like files in the working tree get "renamed". Work around the
mismatch by paying attention to the core.precomposeUnicode
configuration.
* en/unicode-in-refnames:
Honor core.precomposeUnicode in more places
|
|
Update "git difftool" and "git mergetool" so that the combinations
of {diff,merge}.{tool,guitool} configuration variables serve as
fallback settings of each other in a sensible order.
* dl/difftool-mergetool:
difftool: fallback on merge.guitool
difftool: make --gui, --tool and --extcmd mutually exclusive
mergetool: fallback to tool when guitool unavailable
mergetool--lib: create gui_mode function
mergetool: use get_merge_tool function
t7610: add mergetool --gui tests
t7610: unsuppress output
|
|
A pair of private functions in http.c that had names similar to
fread/fwrite did not return the number of elements, which was found
to be confusing.
* mh/http-fread-api-fix:
Make fread/fwrite-like functions in http.c more like fread/fwrite.
|
|
Future-proof a test against an update to MSYS2 runtime v3.x series.
* js/t6500-use-windows-pid-on-mingw:
t6500(mingw): use the Windows PID of the shell
|
|
Allow tests that involve httpd to be run under leak sanitizer, just
like we can already do so under address sanitizer.
* jk/apache-lsan:
t/lib-httpd: pass LSAN_OPTIONS through apache
|
|
Attempt to use an abbreviated option in "git clone --recurs" is
responded by a request to disambiguate between --recursive and
--recurse-submodules, which is bad because these two are synonyms.
The parse-options API has been extended to define such synonyms
more easily and not produce an unnecessary failure.
* nd/parse-options-aliases:
parse-options: don't emit "ambiguous option" for aliases
|
|
"git branch new A...B" and "git checkout -b new A...B" have been
taught that in their contexts, the notation A...B means "the merge
base between these two commits", just like "git checkout A...B"
detaches HEAD at that commit.
* dl/branch-from-3dot-merge-base:
branch: make create_branch accept a merge base rev
t2018: cleanup in current test
|
|
Leakfix.
* js/commit-graph-parse-leakfix:
commit-graph: fix memory leak
|
|
Optionally "make coccicheck" can feed multiple source files to
spatch, gaining performance while spending more memory.
* jk/cocci-batch:
coccicheck: make batch size of 0 mean "unlimited"
coccicheck: optionally batch spatch invocations
|
|
Performance test framework has been broken and measured the version
of Git that happens to be on $PATH, not the specified one to
measure, for a while, which has been corrected.
* ab/perf-installed-fix:
perf-lib.sh: forbid the use of GIT_TEST_INSTALLED
perf tests: add "bindir" prefix to git tree test results
perf-lib.sh: remove GIT_TEST_INSTALLED from perf-lib.sh
perf-lib.sh: make "./run <revisions>" use the correct gits
perf aggregate: remove GIT_TEST_INSTALLED from --codespeed
perf README: correct docs for 3c8f12c96c regression
|
|
Allow DEP and ASLR for Windows build to for security hardening.
* id/windows-dep-aslr:
mingw: enable DEP and ASLR
mingw: do not let ld strip relocations
|
|
Typofix.
* ab/trace2-typofix:
trace2: fix up a missing "leave" entry point
|
|
Typofix.
* nd/submodule-helper-incomplete-line-fix:
submodule--helper: add a missing \n
|
|
Portability fix for a diff-highlight tool (in contrib/).
* cw/diff-highlight:
diff-highlight: use correct /dev/null for UNIX and Windows
|
|
Typofix.
* dl/warn-tagging-a-tag:
tag: fix typo in nested tagging hint
|
|
During the course of review for MyFirstContribution.txt, the suggestion
came up to include anchors to make it easier for veteran contributors to
link specific sections of this documents to newbies. To make life easier
for reviewers, add these anchors in their own commit. See review context
here: https://public-inbox.org/git/20190507195938.GD220818@google.com/
AsciiDoc does not support :sectanchors: and the anchors are not
discoverable, but they are referenceable. So a link to
"foo.com/MyFirstContribution.html#prerequisites" will still work if that
file was generated with AsciiDoc. The inclusion of :sectanchors: does
not create warnings or errors while compiling directly with `asciidoc -b
html5 Documentation/MyFirstContribution.txt` or while compiling with
`make doc`.
AsciiDoctor does support :sectanchors: and displays a paragraph link on
mouseover. When the anchor is included above or inline with a section
(as in this change), the link provided points to the custom ID contained
within [[]] instead of to an autogenerated ID. Practically speaking,
this means we have .../MyFirstContribution.html#summary instead of
.../MyFirstContribution.html#_summary. In addition to being prettier,
the custom IDs also enable anchor linking to work with
asciidoc-generated pages. This change compiles with no warnings using
`asciidoctor -b html5 Documentation/MyFirstContribution.txt`.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This tutorial covers how to add a new command to Git and, in the
process, everything from cloning git/git to getting reviewed on the
mailing list. It's meant for new contributors to go through
interactively, learning the techniques generally used by the git/git
development community.
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Emily Shaffer <emilyshaffer@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows to cancel the current merge without resetting worktree/index,
which is what --abort is for. Like other --quit(s), this is often used
when you forgot that you're in the middle of a merge and already
switched away, doing different things. By the time you've realized, you
can't even continue the merge anymore.
This also makes all in-progress commands, am, merge, rebase, revert and
cherry-pick, take all three --abort, --continue and --quit (bisect has a
different UI).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Octave pattern is almost the same as matlab, except
that '%%%' and '##' can also be used to begin code sections,
in addition to '%%' that is understood by both. Octave
pattern is merged into Matlab pattern. Test cases for
the hunk header patterns of matlab and octave under
t/t4018 are added.
Signed-off-by: Boxuan Li <liboxuan@connect.hku.hk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Tran Ngoc Quan <vnwildman@gmail.com>
|
|
If a merge can be fast-forwarded then make sure that we still edit the
commit message if the user specifies -c. The implementation follows the
same pattern that is used for ordinary rewords that are fast-forwarded.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These options added in f434c083a0 ("send-email: add --no-cc, --no-to,
and --no-bcc", 2010-03-07) were never documented.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I fixed a bug that had broken the reading of sendmail.transferEncoding
in 3494dfd3ee ("send-email: do defaults -> config -> getopt in that
order", 2019-05-09), but the test I added in that commit did nothing
to assert the bug had been fixed.
That issue originates in 8d81408435 ("git-send-email: add
--transfer-encoding option", 2014-11-25) which first added the
"sendemail.transferencoding=8bit".
That test has never done anything meaningful. It tested that the
"--transfer-encoding=8bit" option would turn on the 8bit
Transfer-Encoding, but that was the default at the time (and now). As
checking out 8d81408435 and editing the test to remove that option
will reveal, supplying it never did anything.
So when I copied it thinking it would work in 3494dfd3ee I copied a
previously broken test, although I was making sure it did the right
thing via da-hoc debugger inspection, so the bug was fixed.
So fix the test I added in 3494dfd3ee, as well as the long-standing
test added in 8d81408435. To test if we're actually setting the
Transfer-Encoding let's set it to 7bit, not 8bit, as 7bit will error
out on "email-using-8bit".
This means that we can remove the "sendemail.transferencoding=7bit
fails on 8bit data" test, since it was redundant, we now have other
tests that assert that that'll fail.
While I'm at it convert "git config <key> <value>" in the test setup
to just "-c <key>=<value>" on the command-line. Then we don't need to
cleanup after these tests, and there's no sense in asserting where
config values come from in these tests, we can take that as a given.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change test code added in f434c083a0 ("send-email: add --no-cc,
--no-to, and --no-bcc", 2010-03-07) which blindly copied a pattern
from an earlier test added in 32ae83194b ("add a test for
git-send-email for non-threaded mails", 2009-06-12) where the
"$patches" variable was supplied more than once.
As it turns out we didn't need more than one "$patches" for the test
added in 32ae83194b either. The only tests that actually needed this
sort of invocation were the tests added in 54aae5e1a0 ("t9001:
send-email interation with --in-reply-to and --chain-reply-to",
2010-10-19).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change our default CC_LD_DYNPATH invocation to something GCC likes
these days. Since the GCC 4.6 release unknown flags haven't been
passed through to ld(1). Thus our previous default of CC_LD_DYNPATH=-R
would cause an error on modern GCC unless NO_R_TO_GCC_LINKER was set.
This CC_LD_DYNPATH flag is really obscure, and I don't expect anyone
except those working on git development ever use this.
It's not needed to simply link to libraries like say libpcre,
but *only* for those cases where we're linking to such a library not
present in the OS's library directories. See e.g. ldconfig(8) on Linux
for more details.
I use this to compile my git with a LIBPCREDIR=$HOME/g/pcre2/inst as
I'm building that from source, but someone maintaining an OS package
is almost certainly not going to use this. They're just going to set
USE_LIBPCRE=YesPlease after installing the libpcre dependency,
which'll point to OS libraries which ld(1) will find without the help
of CC_LD_DYNPATH.
Another thing that helps mitigate any potential breakage is that we
detect the right type of invocation in configure.ac, which e.g. HP/UX
uses[1], as does IBM's AIX package[2]. From what I can tell both AIX
and Solaris packagers are building git with GCC, so I'm not adding a
corresponding config.mak.uname default to cater to their OS-native
linkers.
Now for an overview of past development in this area:
Our use of "-R" dates back to 455a7f3275 ("More portability.",
2005-09-30). Soon after that in bbfc63dd78 ("gcc does not necessarily
pass runtime libpath with -R", 2006-12-27) the NO_R_TO_GCC flag was
added, allowing optional use of "-Wl,-rpath=".
Then in f5b904db6b ("Makefile: Allow CC_LD_DYNPATH to be overriden",
2008-08-16) the ability to override this flag to something else
entirely was added, as some linkers use neither "-Wl,-rpath," nor
"-R".
From what I can tell we should, with the benefit of hindsight, have
made this change back in 2006. GCC & ld supported this type of
invocation back then, or since at least binutils-gdb.git's[3]
a1ad915dc4 ("[...]Add support for -rpath[...]", 1994-07-20).
Further reading and prior art can be found at [4][5][6][7]. Making a
plain "-R" an error seems from reading those reports to have been
introduced in GCC 4.6 released on March 25, 2011[8], but I couldn't
confirm this with absolute certainty, its release notes are ambiguous
on the subject, and I couldn't be bothered to try to build & bisect it
against GCC 4.5.
1. https://public-inbox.org/git/20190516093412.14795-1-avarab@gmail.com/
2. https://www.ibm.com/developerworks/aix/library/aix-toolbox/alpha.html
3. git://sourceware.org/git/binutils-gdb.git
4. https://github.com/tsuna/boost.m4/issues/15
5. https://bugzilla.gnome.org/show_bug.cgi?id=641416
6. https://stackoverflow.com/questions/12629042/g-4-6-real-error-unrecognized-option-r
7. https://curl.haxx.se/mail/archive-2014-11/0005.html
8. https://gcc.gnu.org/gcc-4.6/changes.html
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
|
|
In git-format-patch, notes can be appended with the `--notes` option.
However, this must be specified by the user on an
invocation-by-invocation basis. If a user is not careful, it's possible
that they may forget to include it and generate a patch series without
notes.
Teach git-format-patch the `format.notes` config option. Its value is a
notes ref that will be automatically appended. The special value of
"standard" can be used to specify the standard notes. This option is
overridable with the `--no-notes` option in case a user wishes not to
append notes.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
use_pack has its own error message on mmap error, but it can't be
reached when using xmmap, which dies with its own error.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a remote helper exposes the "import" capability, stdout of the
helper is sent to stdin of a new fast-import process. This is done by
setting the corresponding child_process's in field to the value of the
out field of the helper child_process.
The child_process API is defined to close the file descriptors it's
given when calling start_command. This means when start_command is
called for the fast-import process, its input fd (the output fd of the
helper), is closed.
But when the transport helper is later destroyed, in disconnect_helper,
its input and output are closed, which means close() is called with
an invalid fd (since it was already closed as per above). Or worse, with
a valid fd owned by something else (since fd numbers can be reused).
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function's definition has a paramter of type "int" qualified as
"const". The fact that the incoming parameter is used as read-only
in the fuction is an implementation detail that the callers should
not have to be told in the prototype declaring it (and "const" there
has no effect, as C passes parameters by value).
The prototype defined for the function in pkt-line.h lacked the
matching "const" for this reason, but apparently some compilers
(e.g. MS Visual C 2017) complain about the parameter type mismatch.
Let's squelch it by removing the "const" that is pointless in the
definition of a small and trivial function like this, which would
not help optimizing compilers nor reading humans that much.
Noticed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While checking the html formatted git(1) manual page, it was noted
that the link to https://git.github.io/htmldocs/git.html was formatted
as code. Remove the backticks.
While at it, add the https://git-scm.com/docs link which one reviewer
noted had linkable section headings.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is not immediately obvious how to use the `git help` system to show
the git(1) page, with its overview and its background and coordinating
material, such as environment variables.
Let's simply list it as the last few words of the last usage line.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The JGIT prereq uses `type jgit` to determine whether jgit is present.
While this is usually sufficient, it won't help if the jgit found is
badly broken. This wastes time running tests which fail due to no fault
of our own.
Use `jgit --version` instead, to guard against cases where jgit is
present on the system, but will fail to run, e.g. because of some JRE
issue, or missing Java dependencies. Checking that it gets far enough
to process the '--version' argument isn't perfect, but seems to be good
enough in practice. It's also consistent with how we detect some other
dependencies, see e.g. the CURL and UNZIP prerequisites.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
find_worktree() can die() unexpectedly because it uses real_path()
instead of the gentler version. When it's used in 'git worktree add' [1]
and there's a bad worktree, this die() could prevent people from adding
new worktrees.
The "bad" condition to trigger this is when a parent of the worktree's
location is deleted. Then real_path() will complain.
Use the other version so that bad worktrees won't affect 'worktree
add'. The bad ones will eventually be pruned, we just have to tolerate
them for a bit.
[1] added in cb56f55c16 (worktree: disallow adding same path multiple
times, 2018-08-28), or since v2.20.0. Though the real bug in
find_worktree() is much older.
Reported-by: Shaheed Haque <shaheedhaque@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When get_oid() and its helpers see an index name like ":.gitmodules",
they try to load the index on demand, like:
if (repo->index->cache)
repo_read_index(repo);
However, that misses the case when "repo->index" itself is NULL; we'll
segfault in the conditional.
This never happens with the_repository; there we always point its index
field to &the_index. But a submodule repository may have a NULL index
field until somebody calls repo_read_index().
This bug is triggered by t7411, but it was hard to notice because it's
in an expect_failure block. That test was added by 2b1257e463 (t/helper:
add test-submodule-nested-repo-config, 2018-10-25). Back then we had no
easy way to access the .gitmodules blob of a submodule repo, so we
expected (and got) an error message to that effect. Later, d9b8b8f896
(submodule-config.c: use repo_get_oid for reading .gitmodules,
2019-04-16) started looking in the correct repo, which is when we
started triggering the segfault.
With this fix, the test starts passing (once we clean it up as its
comment instructs).
Note that as far as I know, this bug could not be triggered outside of
the test suite. It requires resolving an index name in a submodule, and
all of the code paths (aside from test-tool) which do that either load
the index themselves, or always pass the_repository.
Ultimately it comes from 3a7a698e93 (sha1-name.c: remove implicit
dependency on the_index, 2019-01-12), which replaced a check of
"the_index.cache" with "repo->index->cache". So even if there is another
way to trigger it, it wouldn't affect any versions before then.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Do not change the existing info/refs and objects/info/packs
files if they match the existing content on the filesystem.
This is intended to preserve mtime and make it easier for dumb
HTTP pollers to rely on the If-Modified-Since header.
Combined with stdio and kernel buffering; the kernel should be
able to avoid block layer writes and reduce wear for small files.
As a result, the --force option is no longer needed. So stop
documenting it, but let it remain for compatibility (and
debugging, if necessary).
v3: perform incremental comparison while generating to avoid
OOM with giant files. Remove documentation for --force.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Worktree names are based on $(basename $GIT_WORK_TREE). They aren't
significant until 3a3b9d8cde (refs: new ref types to make per-worktree
refs visible to all worktrees - 2018-10-21), where worktree name could
be part of a refname and must follow refname rules.
Update 'worktree add' code to remove special characters to follow
these rules. In the future the user will be able to specify the
worktree name by themselves if they're not happy with this dumb
character substitution.
Reported-by: Konstantin Kharlamov <hi-angel@yandex.ru>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In function 'finish_request',
inlined from 'process_response' at http-push.c:248:2:
http-push.c:587:4: warning: '%s' directive argument is null [-Wformat-overflow=]
587 | fprintf(stderr, "Unable to get pack file %s\n%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
588 | request->url, curl_errorstr);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
request->url is needed for the error message if there was a failure
during fetch but was being cleared unnecessarily earlier.
note that the leak is prevented by calling release_request unconditionally
at the end.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com>
Suggested-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the user asks to merge "foo" and we suggest "origin/foo" instead,
we do so by simply chopping off "refs/remotes/" from the front of the
suggested ref. This is usually fine, but it's possible that the
resulting name is ambiguous (e.g., you have "refs/heads/origin/foo",
too).
Let's use shorten_unambiguous_ref() to do this the right way, which
should usually yield the same "origin/foo", but "remotes/origin/foo" if
necessary.
Note that in this situation there may be other options (e.g., we could
suggest "heads/origin/foo" as well). I'll leave that up for debate; the
focus here is just to avoid giving advice that does not actually do what
we expect.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git merge" sees an unknown refname, we iterate through the refs to
try to suggest some possible alternates. We do so with for_each_ref(),
and in the callback we add some of the refnames we get to a
string_list that is declared with NODUP, directly adding a pointer into
the refname string our callback received.
But the for_each_ref() machinery does not promise that the refname
string will remain valid, and as a result we may print garbage memory.
The code in question dates back to its inception in e56181060e (help:
add help_unknown_ref(), 2013-05-04). But back then, the refname strings
generally did remain stable, at least immediately after the
for_each_ref() call. Later, in d1cf15516f (packed_ref_iterator_begin():
iterate using `mmapped_ref_iterator`, 2017-09-25), we started
consistently re-using a separate buffer for packed refs.
The fix is simple: duplicate the strings we intend to collect. We
already call string_list_clear(), so the memory is correctly freed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The only remaining scripted part of `git rebase` is the
`--preserve-merges` backend. Meaning: there is little reason to keep the
"library of common rebase functions" as a separate file.
While moving the functions to `git-rebase--preserve-merges.sh`, we also
drop the `move_to_original_branch` function that is no longer used.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update a code comment that referred to those files as if they were still
there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This went away in 0609b741a4 (rebase -i: combine rebase--interactive.c
with rebase.c, 2019-04-17).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One test case's title mentioned the then-current implementation detail
that the `--am` backend was implemented in `git-rebase--am.sh`.
This is no longer the case, so let's update the title to reflect the
current reality.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 21853626ea (built-in rebase: call `git am` directly, 2019-01-18),
the built-in rebase already uses the built-in `git am` directly.
Now that d03ebd411c (rebase: remove the rebase.useBuiltin setting,
2019-03-18) even removed the scripted rebase, there is no longer any
user of `git-rebase--am.sh`, so let's just remove it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The stash.useBuiltin variable introduced in 90a462725e ("stash:
optionally use the scripted version again", 2019-02-25) was turned on by
default, but had no documentation.
Let's document it so that users who run into any stability issues with
the C rewrite know there's an escape hatch, and spell out that the
user should please report the bug when they have to turn off the
built-in stash.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
|
|
Fix mistakes reported by Mattias Engdegård <mattiase@acm.org>.
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
|
