| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many more strings are prepared for l10n.
* nd/i18n: (23 commits)
transport-helper.c: mark more strings for translation
transport.c: mark more strings for translation
sha1-file.c: mark more strings for translation
sequencer.c: mark more strings for translation
replace-object.c: mark more strings for translation
refspec.c: mark more strings for translation
refs.c: mark more strings for translation
pkt-line.c: mark more strings for translation
object.c: mark more strings for translation
exec-cmd.c: mark more strings for translation
environment.c: mark more strings for translation
dir.c: mark more strings for translation
convert.c: mark more strings for translation
connect.c: mark more strings for translation
config.c: mark more strings for translation
commit-graph.c: mark more strings for translation
builtin/replace.c: mark more strings for translation
builtin/pack-objects.c: mark more strings for translation
builtin/grep.c: mark strings for translation
builtin/config.c: mark more strings for translation
...
|
|
Many messages will be marked for translation in the following
commits. This commit updates some of them to be more consistent and
reduce diff noise in those commits. Changes are
- keep the first letter of die(), error() and warning() in lowercase
- no full stop in die(), error() or warning() if it's single sentence
messages
- indentation
- some messages are turned to BUG(), or prefixed with "BUG:" and will
not be marked for i18n
- some messages are improved to give more information
- some messages are broken down by sentence to be i18n friendly
(on the same token, combine multiple warning() into one big string)
- the trailing \n is converted to printf_ln if possible, or deleted
if not redundant
- errno_errno() is used instead of explicit strerror()
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow callers of lookup_commit to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow the callers of lookup_blob
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow the callers of parse_object_buffer
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow callers of lookup_object to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow the callers of parse_object
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
|
|
The in-core "commit" object had an all-purpose "void *util" field,
which was tricky to use especially in library-ish part of the
code. All of the existing uses of the field has been migrated to a
more dedicated "commit-slab" mechanism and the field is eliminated.
* nd/commit-util-to-slab:
commit.h: delete 'util' field in struct commit
merge: use commit-slab in merge remote desc instead of commit->util
log: use commit-slab in prepare_bases() instead of commit->util
show-branch: note about its object flags usage
show-branch: use commit-slab for commit-name instead of commit->util
name-rev: use commit-slab for rev-name instead of commit->util
bisect.c: use commit-slab for commit weight instead of commit->util
revision.c: use commit-slab for show_source
sequencer.c: use commit-slab to associate todo items to commits
sequencer.c: use commit-slab to mark seen commits
shallow.c: use commit-slab for commit depth instead of commit->util
describe: use commit-slab for commit names instead of commit->util
blame: use commit-slab for blame suspects instead of commit->util
commit-slab: support shared commit-slab
commit-slab.h: code split
|
|
"git fetch $there $refspec" that talks over protocol v2 can take
advantage of server-side ref filtering; the code has been extended
so that this mechanism triggers also when fetching with configured
refspec.
* bw/ref-prefix-for-configured-refspec: (38 commits)
fetch: generate ref-prefixes when using a configured refspec
refspec: consolidate ref-prefix generation logic
submodule: convert push_unpushed_submodules to take a struct refspec
remote: convert check_push_refs to take a struct refspec
remote: convert match_push_refs to take a struct refspec
http-push: store refspecs in a struct refspec
transport: remove transport_verify_remote_names
send-pack: store refspecs in a struct refspec
transport: convert transport_push to take a struct refspec
push: convert to use struct refspec
push: check for errors earlier
remote: convert match_explicit_refs to take a struct refspec
remote: convert get_ref_match to take a struct refspec
remote: convert query_refspecs to take a struct refspec
remote: convert apply_refspecs to take a struct refspec
remote: convert get_stale_heads to take a struct refspec
fetch: convert prune_refs to take a struct refspec
fetch: convert get_ref_map to take a struct refspec
fetch: convert do_fetch to take a struct refspec
refspec: remove the deprecated functions
...
|
|
Developer support update, by using BUG() macro instead of die() to
mark codepaths that should not happen more clearly.
* js/use-bug-macro:
BUG_exit_code: fix sparse "symbol not declared" warning
Convert remaining die*(BUG) messages
Replace all die("BUG: ...") calls by BUG() ones
run-command: use BUG() to report bugs, not die()
test-tool: help verifying BUG() code paths
|
|
Code clean-up to avoid non-standard-conformant pointer arithmetic.
* rs/no-null-ptr-arith-in-fast-export:
fast-export: avoid NULL pointer arithmetic
|
|
The codepath around object-info API has been taught to take the
repository object (which in turn tells the API which object store
the objects are to be located).
* sb/oid-object-info:
cache.h: allow oid_object_info to handle arbitrary repositories
packfile: add repository argument to cache_or_unpack_entry
packfile: add repository argument to unpack_entry
packfile: add repository argument to read_object
packfile: add repository argument to packed_object_info
packfile: add repository argument to packed_to_object_type
packfile: add repository argument to retry_bad_packed_offset
cache.h: add repository argument to oid_object_info
cache.h: add repository argument to oid_object_info_extended
|
|
The code has been taught to use the duplicated information stored
in the commit-graph file to learn the tree object name for a commit
to avoid opening and parsing the commit object when it makes sense
to do so.
* ds/lazy-load-trees:
coccinelle: avoid wrong transformation suggestions from commit.cocci
commit-graph: lazy-load trees for commits
treewide: replace maybe_tree with accessor methods
commit: create get_commit_tree() method
treewide: rename tree to maybe_tree
|
|
Instead of relying on commit->util to store the source string, let the
user provide a commit-slab to store the source strings in.
It's done so that commit->util can be removed. See more explanation in
the commit that removes commit->util.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert 'apply_refspecs()' to take a 'struct refspec' as a parameter instead
of a list of 'struct refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert fast-export to use 'struct refspec' instead of using a list of
refspec_item's.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for introducing an abstraction around a collection of
refspecs (much like how a 'struct pathspec' is a collection of 'struct
pathspec_item's) rename the existing 'struct refspec' to 'struct
refspec_item'.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for performing a refactor on refspec related code, move
the refspec parsing logic into its own file.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Clang 6 reports the following warning, which is turned into an error in a
DEVELOPER build:
builtin/fast-export.c:162:28: error: performing pointer arithmetic on a null pointer has undefined behavior [-Werror,-Wnull-pointer-arithmetic]
return ((uint32_t *)NULL) + mark;
~~~~~~~~~~~~~~~~~~ ^
1 error generated.
The compiler is correct, and the error message speaks for itself. There
is no need for any undefined operation -- just cast mark to void * or
uint32_t after an intermediate cast to uintptr_t. That encodes the
integer value into a pointer and later decodes it as intended.
While at it remove an outdated comment -- intptr_t has been used since
ffe659f94d (parse-options: make some arguments optional, add callbacks),
committed in October 2007.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fast-export" had a regression in v2.15.0 era where it skipped
some merge commits in certain cases, which has been corrected.
* ma/fast-export-skip-merge-fix:
fast-export: fix regression skipping some merge-commits
|
|
In d8193743e08 (usage.c: add BUG() function, 2017-05-12), a new macro
was introduced to use for reporting bugs instead of die(). It was then
subsequently used to convert one single caller in 588a538ae55
(setup_git_env: convert die("BUG") to BUG(), 2017-05-12).
The cover letter of the patch series containing this patch
(cf 20170513032414.mfrwabt4hovujde2@sigill.intra.peff.net) is not
terribly clear why only one call site was converted, or what the plan
is for other, similar calls to die() to report bugs.
Let's just convert all remaining ones in one fell swoop.
This trick was performed by this invocation:
sed -i 's/die("BUG: /BUG("/g' $(git grep -l 'die("BUG' \*.c)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow the callers of oid_object_info
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
7199203937 (object_array: add and use `object_array_pop()`, 2017-09-23)
noted that the pattern `object = array.objects[--array.nr].item` could
be abstracted as `object = object_array_pop(&array)`.
Unfortunately, one of the conversions was horribly wrong. Between
grabbing the last object (i.e., peeking at it) and decreasing the object
count, the original code would sometimes return early. The updated code
on the other hand, will always pop the last element, then maybe do the
early return without doing anything with the object.
The end result is that merge commits where all the parents have still
not been exported will simply be dropped, meaning that they will be
completely missing from the exported data.
Re-add a commit when it is not yet time to handle it. An alternative
that was considered was to peek-then-pop. That carries some risk with it
since the peeking and popping need to act on the same object, in a
concerted fashion.
Add a test that would have caught this.
Reported-by: Isaac Chou <Isaac.Chou@microfocus.com>
Analyzed-by: Isaac Chou <Isaac.Chou@microfocus.com>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In anticipation of making trees load lazily, create a Coccinelle
script (contrib/coccinelle/commit.cocci) to ensure that all
references to the 'maybe_tree' member of struct commit are either
mutations or accesses through get_commit_tree() or
get_commit_tree_oid().
Apply the Coccinelle script to create the rest of the patch.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the commit-graph file to walk commit history removes the large
cost of parsing commits during the walk. This exposes a performance
issue: lookup_tree() takes a large portion of the computation time,
even when Git never uses those trees.
In anticipation of lazy-loading these trees, rename the 'tree' member
of struct commit to 'maybe_tree'. This serves two purposes: it hints
at the future role of possibly being NULL even if the commit has a
valid tree, and it allows for unambiguous transformation from simple
member access (i.e. commit->maybe_tree) to method access.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert read_sha1_file to take a pointer to struct object_id and rename
it read_object_file. Do the same for read_sha1_file_extended.
Convert one use in grep.c to use the new function without any other code
change, since the pointer being passed is a void pointer that is already
initialized with a pointer to struct object_id. Update the declaration
and definitions of the modified functions, and apply the following
semantic patch to convert the remaining callers:
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1.hash, E2, E3)
+ read_object_file(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1->hash, E2, E3)
+ read_object_file(E1, E2, E3)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1.hash, E2, E3, E4)
+ read_object_file_extended(&E1, E2, E3, E4)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1->hash, E2, E3, E4)
+ read_object_file_extended(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert sha1_object_info and sha1_object_info_extended to take pointers
to struct object_id and rename them to use "oid" instead of "sha1" in
their names. Update the declaration and definition and apply the
following semantic patch, plus the standard object_id transforms:
@@
expression E1, E2;
@@
- sha1_object_info(E1.hash, E2)
+ oid_object_info(&E1, E2)
@@
expression E1, E2;
@@
- sha1_object_info(E1->hash, E2)
+ oid_object_info(E1, E2)
@@
expression E1, E2, E3;
@@
- sha1_object_info_extended(E1.hash, E2, E3)
+ oid_object_info_extended(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- sha1_object_info_extended(E1->hash, E2, E3)
+ oid_object_info_extended(E1, E2, E3)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert this function to take a pointer to struct object_id and rename
it check_object_signature. Introduce temporaries to convert the return
values of lookup_replace_object and lookup_replace_object_extended into
struct object_id.
The temporaries are needed because in order to convert
lookup_replace_object, open_istream needs to be converted, and
open_istream needs check_sha1_signature to be converted, causing a loop
of dependencies. The temporaries will be removed in a future patch.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Improve the names of the identifiers in decorate.h, document them, and
add an example of how to use these functions.
The example is compiled and run as part of the test suite.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A single-word "unsigned flags" in the diff options is being split
into a structure with many bitfields.
* bw/diff-opt-impl-to-bitfields:
diff: make struct diff_flags members lowercase
diff: remove DIFF_OPT_CLR macro
diff: remove DIFF_OPT_SET macro
diff: remove DIFF_OPT_TST macro
diff: remove touched flags
diff: add flag to indicate textconv was set via cmdline
diff: convert flags to be stored in bitfields
add, reset: use DIFF_OPT_SET macro to set a diff flag
|
|
Now that the flags stored in struct diff_flags are being accessed
directly and not through macros, change all struct members from being
uppercase to lowercase.
This conversion is done using the following semantic patch:
@@
expression E;
@@
- E.RECURSIVE
+ E.recursive
@@
expression E;
@@
- E.TREE_IN_RECURSIVE
+ E.tree_in_recursive
@@
expression E;
@@
- E.BINARY
+ E.binary
@@
expression E;
@@
- E.TEXT
+ E.text
@@
expression E;
@@
- E.FULL_INDEX
+ E.full_index
@@
expression E;
@@
- E.SILENT_ON_REMOVE
+ E.silent_on_remove
@@
expression E;
@@
- E.FIND_COPIES_HARDER
+ E.find_copies_harder
@@
expression E;
@@
- E.FOLLOW_RENAMES
+ E.follow_renames
@@
expression E;
@@
- E.RENAME_EMPTY
+ E.rename_empty
@@
expression E;
@@
- E.HAS_CHANGES
+ E.has_changes
@@
expression E;
@@
- E.QUICK
+ E.quick
@@
expression E;
@@
- E.NO_INDEX
+ E.no_index
@@
expression E;
@@
- E.ALLOW_EXTERNAL
+ E.allow_external
@@
expression E;
@@
- E.EXIT_WITH_STATUS
+ E.exit_with_status
@@
expression E;
@@
- E.REVERSE_DIFF
+ E.reverse_diff
@@
expression E;
@@
- E.CHECK_FAILED
+ E.check_failed
@@
expression E;
@@
- E.RELATIVE_NAME
+ E.relative_name
@@
expression E;
@@
- E.IGNORE_SUBMODULES
+ E.ignore_submodules
@@
expression E;
@@
- E.DIRSTAT_CUMULATIVE
+ E.dirstat_cumulative
@@
expression E;
@@
- E.DIRSTAT_BY_FILE
+ E.dirstat_by_file
@@
expression E;
@@
- E.ALLOW_TEXTCONV
+ E.allow_textconv
@@
expression E;
@@
- E.TEXTCONV_SET_VIA_CMDLINE
+ E.textconv_set_via_cmdline
@@
expression E;
@@
- E.DIFF_FROM_CONTENTS
+ E.diff_from_contents
@@
expression E;
@@
- E.DIRTY_SUBMODULES
+ E.dirty_submodules
@@
expression E;
@@
- E.IGNORE_UNTRACKED_IN_SUBMODULES
+ E.ignore_untracked_in_submodules
@@
expression E;
@@
- E.IGNORE_DIRTY_SUBMODULES
+ E.ignore_dirty_submodules
@@
expression E;
@@
- E.OVERRIDE_SUBMODULE_CONFIG
+ E.override_submodule_config
@@
expression E;
@@
- E.DIRSTAT_BY_LINE
+ E.dirstat_by_line
@@
expression E;
@@
- E.FUNCCONTEXT
+ E.funccontext
@@
expression E;
@@
- E.PICKAXE_IGNORE_CASE
+ E.pickaxe_ignore_case
@@
expression E;
@@
- E.DEFAULT_FOLLOW_RENAMES
+ E.default_follow_renames
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the `DIFF_OPT_SET` macro and instead set the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_SET(&E, fld)
+ E.flags.fld = 1
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_SET(ptr, fld)
+ ptr->flags.fld = 1
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All of the callers of these functions just pass the hash member of a
struct object_id, so convert them to use a pointer to struct object_id
directly. Insert a check for NULL in expand_ref on a temporary basis;
this check can be removed when resolve_ref_unsafe is converted as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Memory leaks in various codepaths have been plugged.
* ma/leakplugs:
pack-bitmap[-write]: use `object_array_clear()`, don't leak
object_array: add and use `object_array_pop()`
object_array: use `object_array_clear()`, not `free()`
leak_pending: use `object_array_clear()`, not `free()`
commit: fix memory leak in `reduce_heads()`
builtin/commit: fix memory leak in `prepare_index()`
|
|
"git fast-export" with -M/-C option issued "copy" instruction on a
path that is simultaneously modified, which was incorrect.
* jt/fast-export-copy-modify-fix:
fast-export: do not copy from modified file
|
|
In a couple of places, we pop objects off an object array `foo` by
decreasing `foo.nr`. We access `foo.nr` in many places, but most if not
all other times we do so read-only, e.g., as we iterate over the array.
But when we change `foo.nr` behind the array's back, it feels a bit
nasty and looks like it might leak memory.
Leaks happen if the popped element has an allocated `name` or `path`.
At the moment, that is not the case. Still, 1) the object array might
gain more fields that want to be freed, 2) a code path where we pop
might start using names or paths, 3) one of these code paths might be
copied to somewhere where we do, and 4) using a dedicated function for
popping is conceptually cleaner.
Introduce and use `object_array_pop()` instead. Release memory in the
new function. Document that popping an object leaves the associated
elements in limbo.
The converted places were identified by grepping for "\.nr\>" and
looking for "--".
Make the new function return NULL on an empty array. This is consistent
with `pop_commit()` and allows the following:
while ((o = object_array_pop(&foo)) != NULL) {
// do something
}
But as noted above, we don't need to go out of our way to avoid reading
`foo.nr`. This is probably more readable:
while (foo.nr) {
... o = object_array_pop(&foo);
// do something
}
The name of `object_array_pop()` does not quite align with
`add_object_array()`. That is unfortunate. On the other hand, it matches
`object_array_clear()`. Arguably it's `add_...` that is the odd one out,
since it reads like it's used to "add" an "object array". For that
reason, side with `object_array_clear()`.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When run with the "-C" option, fast-export writes 'C' commands in its
output whenever the internal diff mechanism detects a file copy,
indicating that fast-import should copy the given existing file to the
given new filename. However, the diff mechanism works against the
prior version of the file, whereas fast-import uses whatever is current.
This causes issues when a commit both modifies a file and uses it as the
source for a copy.
Therefore, teach fast-export to refrain from writing 'C' when it has
already written a modification command for a file.
An existing test in t9350-fast-export is also fixed in this patch. The
existing line "C file6 file7" copies the wrong version of file6, but it
has coincidentally worked because file7 was subsequently overridden.
Reported-by: Juraj Oršulić <juraj.orsulic@fer.hr>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using the hashmap a common need is to have access to caller provided
data in the compare function. A couple of times we abuse the keydata field
to pass in the data needed. This happens for example in patch-ids.c.
This patch changes the function signature of the compare function
to have one more void pointer available. The pointer given for each
invocation of the compare function must be defined in the init function
of the hashmap and is just passed through.
Documentation of this new feature is deferred to a later patch.
This is a rather mechanical conversion, just adding the new pass-through
parameter. However while at it improve the naming of the fields of all
compare functions used by hashmaps by ensuring unused parameters are
prefixed with 'unused_' and naming the parameters what they are (instead
of 'unused' make it 'unused_keydata').
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
|
|
Conversion from uchar[20] to struct object_id continues.
* bw/object-id: (33 commits)
diff: rename diff_fill_sha1_info to diff_fill_oid_info
diffcore-rename: use is_empty_blob_oid
tree-diff: convert path_appendnew to object_id
tree-diff: convert diff_tree_paths to struct object_id
tree-diff: convert try_to_follow_renames to struct object_id
builtin/diff-tree: cleanup references to sha1
diff-tree: convert diff_tree_sha1 to struct object_id
notes-merge: convert write_note_to_worktree to struct object_id
notes-merge: convert verify_notes_filepair to struct object_id
notes-merge: convert find_notes_merge_pair_ps to struct object_id
notes-merge: convert merge_from_diffs to struct object_id
notes-merge: convert notes_merge* to struct object_id
tree-diff: convert diff_root_tree_sha1 to struct object_id
combine-diff: convert find_paths_* to struct object_id
combine-diff: convert diff_tree_combined to struct object_id
diff: convert diff_flush_patch_id to struct object_id
patch-ids: convert to struct object_id
diff: finish conversion for prepare_temp_file to struct object_id
diff: convert reuse_worktree_file to struct object_id
diff: convert fill_filespec to struct object_id
...
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We often try to open a file for reading whose existence is
optional, and silently ignore errors from open/fopen; report such
errors if they are not due to missing files.
* nd/fopen-errors:
mingw_fopen: report ENOENT for invalid file names
mingw: verify that paths are not mistaken for remote nicknames
log: fix memory leak in open_next_file()
rerere.c: move error_errno() closer to the source system call
print errno when reporting a system call error
wrapper.c: make warn_on_inaccessible() static
wrapper.c: add and use fopen_or_warn()
wrapper.c: add and use warn_on_fopen_errors()
config.mak.uname: set FREAD_READS_DIRECTORIES for Darwin, too
config.mak.uname: set FREAD_READS_DIRECTORIES for Linux and FreeBSD
clone: use xfopen() instead of fopen()
use xfopen() in more places
git_fopen: fix a sparse 'not declared' warning
|
|
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix memory leaks pointed out by Coverity (and people).
* js/plug-leaks: (26 commits)
checkout: fix memory leak
submodule_uses_worktrees(): plug memory leak
show_worktree(): plug memory leak
name-rev: avoid leaking memory in the `deref` case
remote: plug memory leak in match_explicit()
add_reflog_for_walk: avoid memory leak
shallow: avoid memory leak
line-log: avoid memory leak
receive-pack: plug memory leak in update()
fast-export: avoid leaking memory in handle_tag()
mktree: plug memory leaks reported by Coverity
pack-redundant: plug memory leak
setup_discovered_git_dir(): plug memory leak
setup_bare_git_dir(): help static analysis
split_commit_in_progress(): simplify & fix memory leak
checkout: fix memory leak
cat-file: fix memory leak
mailinfo & mailsplit: check for EOF while parsing
status: close file descriptor after reading git-rebase-todo
difftool: address a couple of resource/memory leaks
...
|
|
xfopen()
- provides error details
- explains error on reading, or writing, or whatever operation
- has l10n support
- prints file name in the error
Some of these are missing in the places that are replaced with xfopen(),
which is a clear win. In some other places, it's just less code (not as
clearly a win as the previous case but still is).
The only slight regresssion is in remote-testsvn, where we don't report
the file class (marks files) in the error messages anymore. But since
this is a _test_ svn remote transport, I'm not too concerned.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make parse_object, parse_object_or_die, and parse_object_buffer take a
pointer to struct object_id. Remove the temporary variables inserted
earlier, since they are no longer necessary. Transform all of the
callers using the following semantic patch:
@@
expression E1;
@@
- parse_object(E1.hash)
+ parse_object(&E1)
@@
expression E1;
@@
- parse_object(E1->hash)
+ parse_object(E1)
@@
expression E1, E2;
@@
- parse_object_or_die(E1.hash, E2)
+ parse_object_or_die(&E1, E2)
@@
expression E1, E2;
@@
- parse_object_or_die(E1->hash, E2)
+ parse_object_or_die(E1, E2)
@@
expression E1, E2, E3, E4, E5;
@@
- parse_object_buffer(E1.hash, E2, E3, E4, E5)
+ parse_object_buffer(&E1, E2, E3, E4, E5)
@@
expression E1, E2, E3, E4, E5;
@@
- parse_object_buffer(E1->hash, E2, E3, E4, E5)
+ parse_object_buffer(E1, E2, E3, E4, E5)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert lookup_blob to take a pointer to struct object_id.
The commit was created with manual changes to blob.c and blob.h, plus
the following semantic patch:
@@
expression E1;
@@
- lookup_blob(E1.hash)
+ lookup_blob(&E1)
@@
expression E1;
@@
- lookup_blob(E1->hash)
+ lookup_blob(E1)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert lookup_commit, lookup_commit_or_die,
lookup_commit_reference, and lookup_commit_reference_gently to take
struct object_id arguments.
Introduce a temporary in parse_object buffer in order to convert this
function. This is required since in order to convert parse_object and
parse_object_buffer, lookup_commit_reference_gently and
lookup_commit_or_die would need to be converted. Not introducing a
temporary would therefore require that lookup_commit_or_die take a
struct object_id *, but lookup_commit would take unsigned char *,
leaving a confusing and hard-to-use interface.
parse_object_buffer will lose this temporary in a later patch.
This commit was created with manual changes to commit.c, commit.h, and
object.c, plus the following semantic patch:
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1.hash, E2)
+ lookup_commit_reference_gently(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1->hash, E2)
+ lookup_commit_reference_gently(E1, E2)
@@
expression E1;
@@
- lookup_commit_reference(E1.hash)
+ lookup_commit_reference(&E1)
@@
expression E1;
@@
- lookup_commit_reference(E1->hash)
+ lookup_commit_reference(E1)
@@
expression E1;
@@
- lookup_commit(E1.hash)
+ lookup_commit(&E1)
@@
expression E1;
@@
- lookup_commit(E1->hash)
+ lookup_commit(E1)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1.hash, E2)
+ lookup_commit_or_die(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1->hash, E2)
+ lookup_commit_or_die(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reported by, you guessed it, Coverity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to converting to struct object_id, write some hardcoded
buffer sizes in terms of GIT_SHA1_RAWSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the semantic patch contrib/coccinelle/qsort.cocci to the code
base, replacing calls of qsort(3) with QSORT. The resulting code is
shorter and supports empty arrays with NULL pointers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert struct diff_filespec's sha1 member to use a struct object_id
called "oid" instead. The following Coccinelle semantic patch was used
to implement this, followed by the transformations in object_id.cocci:
@@
struct diff_filespec o;
@@
- o.sha1
+ o.oid.hash
@@
struct diff_filespec *p;
@@
- p->sha1
+ p->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Each of these cases can be converted to use ALLOC_ARRAY or
REALLOC_ARRAY, which has two advantages:
1. It automatically checks the array-size multiplication
for overflow.
2. It always uses sizeof(*array) for the element-size,
so that it can never go out of sync with the declared
type of the array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some codepaths used fopen(3) when opening a fixed path in $GIT_DIR
(e.g. COMMIT_EDITMSG) that is meant to be left after the command is
done. This however did not work well if the repository is set to
be shared with core.sharedRepository and the umask of the previous
user is tighter. They have been made to work better by calling
unlink(2) and retrying after fopen(3) fails with EPERM.
* js/fopen-harder:
Handle more file writes correctly in shared repos
commit: allow editing the commit message even in shared repos
|
|
In shared repositories, we have to be careful when writing files whose
permissions do not allow users other than the owner to write them.
In particular, we force the marks file of fast-export and the FETCH_HEAD
when fetching to be rewritten from scratch.
This commit does not touch other calls to fopen() that want to
write files:
- commands that write to working tree files (core.sharedRepository
does not affect permission bits of working tree files),
e.g. .rej file created by "apply --reject", result of applying a
previous conflict resolution by "rerere", "git merge-file".
- git am, when splitting mails (git-am correctly cleans up its directory
after finishing, so there is no need to share those files between users)
- git submodule clone, when writing the .git file, because the file
will not be overwritten
- git_terminal_prompt() in compat/terminal.c, because it is not writing to
a file at all
- git diff --output, because the output file is clearly not intended to be
shared between the users of the current repository
- git fast-import, when writing a crash report, because the reports' file
names are unique due to an embedded process ID
- mailinfo() in mailinfo.c, because the output is clearly not intended to
be shared between the users of the current repository
- check_or_regenerate_marks() in remote-testsvn.c, because this is only
used for Git's internal testing
- git fsck, when writing lost&found blobs (this should probably be
changed, but left as a low-hanging fruit for future contributors).
Note that this patch does not touch callers of write_file() and
write_file_gently(), which would benefit from the same scrutiny as
to usage in shared repositories. Most notable users are branch,
daemon, submodule & worktree, and a worrisome call in transport.c
when updating one ref (which ignores the shared flag).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Some functions from the refs module were still declared in cache.h.
Move them to refs.h.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Sometimes users want to report a bug they experience on
their repository, but they are not at liberty to share the
contents of the repository. It would be useful if they could
produce a repository that has a similar shape to its history
and tree, but without leaking any information. This
"anonymized" repository could then be shared with developers
(assuming it still replicates the original problem).
This patch implements an "--anonymize" option to
fast-export, which generates a stream that can recreate such
a repository. Producing a single stream makes it easy for
the caller to verify that they are not leaking any useful
information. You can get an overview of what will be shared
by running a command like:
git fast-export --anonymize --all |
perl -pe 's/\d+/X/g' |
sort -u |
less
which will show every unique line we generate, modulo any
numbers (each anonymized token is assigned a number, like
"User 0", and we replace it consistently in the output).
In addition to anonymizing, this produces test cases that
are relatively small (compared to the original repository)
and fast to generate (compared to using filter-branch, or
modifying the output of fast-export yourself). Here are
numbers for git.git:
$ time git fast-export --anonymize --all \
--tag-of-filtered-object=drop >output
real 0m2.883s
user 0m2.828s
sys 0m0.052s
$ gzip output
$ ls -lh output.gz | awk '{print $5}'
2.9M
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move "commit->buffer" out of the in-core commit object and keep
track of their lengths. Use this to optimize the code paths to
validate GPG signatures in commit objects.
* jk/commit-buffer-length:
reuse cached commit buffer when parsing signatures
commit: record buffer length in cache
commit: convert commit->buffer to a slab
commit-slab: provide a static initializer
use get_commit_buffer everywhere
convert logmsg_reencode to get_commit_buffer
use get_commit_buffer to avoid duplicate code
use get_cached_commit_buffer where appropriate
provide helpers to access the commit buffer
provide a helper to set the commit buffer
provide a helper to free commit buffer
sequencer: use logmsg_reencode in get_message
logmsg_reencode: return const buffer
do not create "struct commit" with xcalloc
commit: push commit_index update into alloc_commit_node
alloc: include any-object allocations in alloc_report
replace dangerous uses of strbuf_attach
commit_tree: take a pointer/len pair rather than a const strbuf
|
|
Most callsites which use the commit buffer try to use the
cached version attached to the commit, rather than
re-reading from disk. Unfortunately, that interface provides
only a pointer to the NUL-terminated buffer, with no
indication of the original length.
For the most part, this doesn't matter. People do not put
NULs in their commit messages, and the log code is happy to
treat it all as a NUL-terminated string. However, some code
paths do care. For example, when checking signatures, we
want to be very careful that we verify all the bytes to
avoid malicious trickery.
This patch just adds an optional "size" out-pointer to
get_commit_buffer and friends. The existing callers all pass
NULL (there did not seem to be any obvious sites where we
could avoid an immediate strlen() call, though perhaps with
some further refactoring we could).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Each of these sites assumes that commit->buffer is valid.
Since they would segfault if this was not the case, they are
likely to be correct in practice. However, we can
future-proof them by using get_commit_buffer.
And as a side effect, we abstract away the final bare uses
of commit->buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
So that we can convert the exported ref names.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We don't want to pass arguments specific to fast-export to
setup_revisions.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
|
|
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/robustify-parse-commit:
checkout: do not die when leaving broken detached HEAD
use parse_commit_or_die instead of custom message
use parse_commit_or_die instead of segfaulting
assume parse_commit checks for NULL commit
assume parse_commit checks commit->object.parsed
log_tree_diff: die when we fail to parse a commit
|
|
Some unchecked calls to parse_commit should obviously die on
error, because their next step is to start looking at the
parsed fields, which will cause a segfault. These are
obvious candidates for parse_commit_or_die, which will be a
strict improvement in behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code simpification.
* fc/fast-export:
fast-export: refactor get_tags_and_duplicates()
fast-export: make extra_refs global
|
|
Convert most uses of OPT_BOOLEAN/OPTION_BOOLEAN that can use
OPT_BOOL/OPTION_BOOLEAN which have much saner semantics, and turn
remaining ones into OPT_SET_INT, OPT_COUNTUP, etc. as necessary.
* sb/parseopt-boolean-removal:
revert: use the OPT_CMDMODE for parsing, reducing code
checkout-index: fix negations of even numbers of -n
config parsing options: allow one flag multiple times
hash-object: replace stdin parsing OPT_BOOLEAN by OPT_COUNTUP
branch, commit, name-rev: ease up boolean conditions
checkout: remove superfluous local variable
log, format-patch: parsing uses OPT__QUIET
Replace deprecated OPT_BOOLEAN by OPT_BOOL
Remove deprecated OPTION_BOOLEAN for parsing arguments
|
|
Split into a separate helper function get_commit() so that the part that
finds the relevant commit, and the part that does something with it
(handle tag object, etc.) are in different places.
No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's no need to pass it around everywhere. This would make easier
further refactoring that makes use of this variable.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This task emerged from b04ba2bb (parse-options: deprecate OPT_BOOLEAN,
2011-09-27). All occurrences of the respective variables have
been reviewed and none of them relied on the counting up mechanism,
but all of them were using the variable as a true boolean.
This patch does not change semantics of any command intentionally.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ondřej Bílka <neleai@seznam.cz>
Reviewed-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It's wrong to call get_sha1() if they should be SHA-1s, plus
inefficient.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We don't need the parsed objects at this point, merely the
information that they have marks.
Seems to be three times faster in my setup with lots of objects.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We read from the marks file and keep only marked commits, but in
order to find the type of object, we are parsing the whole thing,
which is slow, specially in big repositories with lots of big files.
There's no need for that, we can query the object information with
sha1_object_info().
Before this, loading the objects of a fresh emacs import, with 260598
blobs took 14 minutes, after this patch, it takes 3 seconds.
This is the way fast-import does it. Also die if the object is not
found (like fast-import).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This issues a warning while stripping signatures from signed tags, which
allows us to use it as default behaviour for remote helpers which cannot
specify how to handle signed tags.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Correct common spelling mistakes in comments and tests
kwset: fix spelling in comments
precompose-utf8: fix spelling of "want" in error message
compat/nedmalloc: fix spelling in comments
compat/regex: fix spelling and grammar in comments
obstack: fix spelling of similar
contrib/subtree: fix spelling of accidentally
git-remote-mediawiki: spelling fixes
doc: various spelling fixes
fast-export: fix argument name in error messages
Documentation: distinguish between ref and offset deltas in pack-format
i18n: make the translation of -u advice in one go
|
|
* maint-1.8.1:
fast-export: fix argument name in error messages
Documentation: distinguish between ref and offset deltas in pack-format
|
|
The --signed-tags argument is plural, while error messages referred
to --signed-tag (singular). Tweak error messages to correspond to the
argument.
Signed-off-by: Paul Price <price@astro.princeton.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fast-export can fail because of some pruned-reference when importing a
mark file.
The problem happens in the following scenario:
$ git fast-export --export-marks=MARKS master
(rewrite master)
$ git prune
$ git fast-export --import-marks=MARKS master
This might fail if some references have been removed by prune
because some marks will refer to no longer existing commits.
git-fast-export will not need these objects anyway as they were no
longer reachable.
We still need to update last_numid so we don't change the mapping
between marks and objects for remote-helpers.
Unfortunately, the mark file should not be rewritten without lost marks
if no new objects has been exported, as we could lose track of the last
last_numid.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/fast-export-object-lookup:
fast-export: do not load blob objects twice
fast-export: rename handle_object function
|
|
When fast-export wants to export a blob object, it first
calls parse_object to get a "struct object" and check
whether we have already shown the object. If we haven't
shown it, we then use read_sha1_file to pull it from disk
and write it out.
That means we load each blob from disk twice: once for
parse_object to find its type and check its sha1, and a
second time when we actually output it. We can drop this to
a single load by using lookup_object to check the SHOWN
flag, and then checking the signature on and outputting a
single buffer.
This provides modest speedups on git.git (best-of-five, "git
fast-export HEAD >/dev/null"):
[before] [after]
real 0m14.347s real 0m13.780s
user 0m14.084s user 0m13.620s
sys 0m0.208s sys 0m0.100s
and somewhat more on more blob-heavy repos (this is a
repository full of media files):
[before] [after]
real 0m52.236s real 0m44.451s
user 0m50.568s user 0m43.000s
sys 0m1.536s sys 0m1.284s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The handle_object function is rather vaguely named; it only
operates on blobs, and its purpose is to export the blob to
the output stream. Let's call it "export_blob" to make it
more clear what it does.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When an object has already been exported (and thus is in the marks) it's
flagged as SHOWN, so it will not be exported again, even if in a later
time it's exported through a different ref.
We don't need the object to be exported again, but we want the ref
updated, which doesn't happen.
Since we can't know if a ref was exported or not, let's just assume that
if the commit was marked (flags & SHOWN), the user still wants the ref
updated.
IOW: If it's specified in the command line, it will get updated,
regardless of whether or not the object was marked.
So:
% git branch test master
% git fast-export $mark_flags master
% git fast-export $mark_flags test
Would export 'test' properly.
Additionally, this fixes issues with remote helpers; now they can push
refs whose objects have already been exported, and a few other issues as
well. Update the tests accordingly.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
They have been marked as UNINTERESTING for a reason, lets respect
that. Currently the first ref is handled properly, but not the
rest. Assuming that all the refs point at the same commit in the
following example:
% git fast-export master ^uninteresting ^foo ^bar
reset refs/heads/bar
from :0
reset refs/heads/foo
from :0
reset refs/heads/uninteresting
from :0
% git fast-export ^uninteresting ^foo ^bar master
reset refs/heads/master
from :0
reset refs/heads/bar
from :0
reset refs/heads/foo
from :0
Clearly this is wrong; the negative refs should be ignored.
After this patch:
% git fast-export ^uninteresting ^foo ^bar master
# nothing
% git fast-export master ^uninteresting ^foo ^bar
# nothing
And even more, it would only happen if the ref is pointing to exactly
the same commit, but not otherwise:
% git fast-export ^next next
reset refs/heads/next
from :0
% git fast-export ^next next^{commit}
# nothing
% git fast-export ^next next~0
# nothing
% git fast-export ^next next~1
# nothing
% git fast-export ^next next~2
# nothing
The reason this happens is that before traversing the commits,
fast-export checks if any of the refs point to the same object, and any
duplicated ref gets added to a list in order to issue 'reset' commands
after the traversing. Unfortunately, it's not even checking if the
commit is flagged as UNINTERESTING. The fix of course, is to check it.
However, in order to do it properly we need to get the UNINTERESTING
flag from the command line, not from the commit object, because
"^foo bar" will mark the commit 'bar' uninteresting if foo and bar
points at the same commit. rev_cmdline_info, which was introduced
exactly to handle this situation, contains all the information we
need for get_tags_and_duplicates(), plus the ref flag. This way the
rest of the positive refs will remain untouched; it's only the
negative ones that change in behavior.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Setting 'commit' to 'commit' is a no-op. It might have been there to
avoid a compiler warning, but if so, it was the compiler to blame, and
it's certainly not there any more.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We want to be able to import, and then export, using the same marks, so
that we don't push things that the other side already received.
Unfortunately, fast-export doesn't store blobs in the marks, but
fast-import does. This creates a mismatch when fast export is reusing a
mark that was previously stored by fast-import.
There is no point in one tool saving blobs, and the other not, but for
now let's just check in fast-export that the objects are indeed commits.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fast-export" produced an input stream for fast-import without
properly quoting pathnames when they contain SPs in them.
* js/fast-export-paths-with-spaces:
fast-export: quote paths with spaces
|
|
A path containing a space must be quoted when used as an
argument to either the copy or rename commands (because
unlike other commands, the path is not the final thing on
the line for those commands).
Commit 6280dfdc3b (fast-export: quote paths in output,
2011-08-05) previously attempted to fix fast-export's
quoting by passing all paths through quote_c_style().
However, that function does not consider the space to be a
character which requires quoting, so let's special-case the
space inside print_path(). This will cause space-containing
paths to also be quoted in other commands where such quoting
is not strictly necessary, but it does not hurt to do so.
The test from 6280dfdc3b did not detect this because, while
it does introduce renames in the export stream, it does not
actually turn on rename detection, so they were presented as
pairs of deletions/adds. Using "-M" reveals the bug.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/maint-fast-export-mark-error:
fast-export: report SHA-1 instead of gibberish when marks exist already
|
|
* rs/no-no-no-parseopt:
parse-options: remove PARSE_OPT_NEGHELP
parse-options: allow positivation of options starting, with no-
test-parse-options: convert to OPT_BOOL()
Conflicts:
builtin/grep.c
|
|
PARSE_OPT_NEGHELP is confusing because short options defined with that
flag do the opposite of what the helptext says. It is also not needed
anymore now that options starting with no- can be negated by removing
that prefix. Convert its only two users to OPT_NEGBIT() and OPT_BOOL()
and then remove support for PARSE_OPT_NEGHELP.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In builtin/fast-export.c we'd assign to variables of the
tag_of_filtered_mode enum type with constants defined for the
signed_tag_mode enum.
We'd get the intended value since both the value we were assigning
with and the one we actually wanted had the same positional within
their respective enums, but doing it this way makes no sense.
This issue was spotted by Sun Studio 12 Update 1:
"builtin/fast-export.c", line 54: warning: enum type mismatch: op "=" (E_ENUM_TYPE_MISMATCH_OP)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/fast-export-quote-path:
fast-export: quote paths in output
|
|
Many pathnames in a fast-import stream need to be quoted. In
particular:
1. Pathnames at the end of an "M" or "D" line need quoting
if they contain a LF or start with double-quote.
2. Pathnames on a "C" or "R" line need quoting as above,
but also if they contain spaces.
For (1), we weren't quoting at all. For (2), we put
double-quotes around the paths to handle spaces, but ignored
the possibility that they would need further quoting.
This patch checks whether each pathname needs c-style
quoting, and uses it. This is slightly overkill for (1),
which doesn't actually need to quote many characters that
vanilla c-style quoting does. However, it shouldn't hurt, as
any implementation needs to be ready to handle quoted
strings anyway.
In addition to adding a test, we have to tweak a test which
blindly assumed that case (2) would always use
double-quotes, whether it needed to or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If fast-export is being used to generate a fast-import stream that
will be used afterwards it is desirable to indicate the end of the
stream with the new 'done' command.
Add a flag that causes fast-export to end with 'done'.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mg/placeholders-are-lowercase:
Make <identifier> lowercase in Documentation
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
Make <identifier> lowercase as per CodingGuidelines
CodingGuidelines: downcase placeholders in usage messages
|
|
*.c part for matches with '"[A-Z]+"'.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* en/d-f-conflict-fix:
fast-export: ensure that a renamed file is printed after all references
|
|
t9350 sets up a commit where a file is both copied and renamed. The output
of fast-export for this commit should look like this:
author ...
committer ...
from :19
C "file2" "file4"
R "file2" "file5"
The order of the two modification lines is derived from the result that
the diff machinery produces.
060df62 (fast-export: Fix output order of D/F changes) inserted a qsort
call that modifies the order of the diff result. Unfortunately, qsort need
not be stable. Therefore, it is possible that the 'R' line appears before
the 'C' line and the resulting fast-import stream is incorrect.
Fix it by forcing that the rename entry is printed after all other
modification lines with the same file name.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* en/d-f-conflict-fix:
merge-recursive: Avoid excessive output for and reprocessing of renames
merge-recursive: Fix multiple file rename across D/F conflict
t6031: Add a testcase covering multiple renames across a D/F conflict
merge-recursive: Fix typo
Mark tests that use symlinks as needing SYMLINKS prerequisite
t/t6035-merge-dir-to-symlink.sh: Remove TODO on passing test
fast-import: Improve robustness when D->F changes provided in wrong order
fast-export: Fix output order of D/F changes
merge_recursive: Fix renames across paths below D/F conflicts
merge-recursive: Fix D/F conflicts
Add a rename + D/F conflict testcase
Add additional testcases for D/F conflicts
Conflicts:
merge-recursive.c
|
|
* en/fast-export-fix:
fast-export: Add a --full-tree option
fast-export: Fix dropping of files with --import-marks and path limiting
|
|
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option adds symmetry with fast-import, enabling it to also work with
complete trees instead of just incremental changes. It works by issuing a
'deleteall' directive with each commit and then listing the full set of
files that make up that commit, rather than just showing the list of files
that have changed since the (first) parent commit. Note that this
functionality is automatically turned on when using --import-marks together
with path limiting in order to avoid dropping important but unchanged
files.
This functionality is desired when using hand-written filters along with
'fast-export | some-filter | fast-import' as it can be easier to write
<some-filter> in terms of complete trees than incremental changes.
We could avoid the need to add this option by simply always turning it on.
While the end result would be identical, it would slow things down slightly
by printing many more filenames per commit which goes somewhat against the
'fast' in 'fast-export'.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since fast-export operates by listing file changes since the (first) parent
commit, when using --import-marks and path limiting and using a wider list
of paths than in previous runs, files from the new path(s) will silently be
omitted from the result unless or until a commit which explicitly changes
those files. The resulting repository in such cases is broken and makes no
sense.
This commit fixes this by having fast-export work with complete trees
instead of incremental changes (when both --import-marks and path limiting
are used). It works by issuing a 'deleteall' directive with each commit and
then listing the full set of files that make up that commit, rather than
just showing the list of files that have changed since the (first) parent
commit.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fast-import stream format requires incremental changes which take place
immediately, meaning that for D->F conversions all files below the relevant
directory must be deleted before the resulting file of the same name is
created. Reversing the order can result in fast-import silently deleting
the file right after creating it, resulting in the file missing from the
resulting repository.
We correct this by first sorting the diff_queue_struct in depth-first
order.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the definition and callers of string_list_append to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
t9350: fix careless use of "cd"
difftool: Fix '--gui' when diff.guitool is unconfigured
fast-export: don't segfault when marks file cannot be opened
|
|
This shrinks the top-level directory a bit, and makes it much more
pleasant to use auto-completion on the thing. Instead of
[torvalds@nehalem git]$ em buil<tab>
Display all 180 possibilities? (y or n)
[torvalds@nehalem git]$ em builtin-sh
builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c
builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o
[torvalds@nehalem git]$ em builtin-shor<tab>
builtin-shortlog.c builtin-shortlog.o
[torvalds@nehalem git]$ em builtin-shortlog.c
you get
[torvalds@nehalem git]$ em buil<tab> [type]
builtin/ builtin.h
[torvalds@nehalem git]$ em builtin [auto-completes to]
[torvalds@nehalem git]$ em builtin/sh<tab> [type]
shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o
[torvalds@nehalem git]$ em builtin/sho [auto-completes to]
[torvalds@nehalem git]$ em builtin/shor<tab> [type]
shortlog.c shortlog.o
[torvalds@nehalem git]$ em builtin/shortlog.c
which doesn't seem all that different, but not having that annoying
break in "Display all 180 possibilities?" is quite a relief.
NOTE! If you do this in a clean tree (no object files etc), or using an
editor that has auto-completion rules that ignores '*.o' files, you
won't see that annoying 'Display all 180 possibilities?' message - it
will just show the choices instead. I think bash has some cut-off
around 100 choices or something.
So the reason I see this is that I'm using an odd editory, and thus
don't have the rules to cut down on auto-completion. But you can
simulate that by using 'ls' instead, or something similar.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
