| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"git add/etc -p" now honor the diff.context configuration variable,
and also they learn to honor the -U<n> command-line option.
* lm/add-p-context:
add-patch: add diff.context command line overrides
add-patch: respect diff.context configuration
t: use test_config in t4055
t: use test_grep in t3701 and t4055
|
|
This patch compliments the previous commit, where builtins that use
add-patch infrastructure now respect diff.context and
diff.interHunkContext file configurations.
In particular, this patch helps users who don't want to set persistent
context configurations or just want a way to override them on a one-time
basis, by allowing the relevant builtins to accept corresponding command
line options that override the file configurations.
This mimics commands such as diff and log, which allow for both context
file configuration and command line overrides.
Signed-off-by: Leon Michalak <leonmichalak6@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 036876a1067 (config: hide functions using `the_repository` by
default, 2024-08-13) we have moved around a bunch of functions in the
config subsystem that depend on `the_repository`. Those function have
been converted into mere wrappers around their equivalent function that
takes in a repository as parameter, and the intent was that we'll
eventually remove those wrappers to make the dependency on the global
repository variable explicit at the callsite.
Follow through with that intent and remove `git_config()`. All callsites
are adjusted so that they use `repo_config(the_repository, ...)`
instead. While some callsites might already have a repository available,
this mechanical conversion is the exact same as the current situation
and thus cannot cause any regression. Those sites should eventually be
cleaned up in a later patch series.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar to the previous change for 'git add -p', the reset builtin
checked for integration with the sparse index after possibly redirecting
its logic toward the interactive logic. This means that the builtin
would expand the sparse index to a full one upon read.
Move this check earlier within cmd_reset() to improve performance here.
Add tests to guarantee that we are not universally expanding the index.
Add behavior tests to check that we are doing the same operations as a
full index.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `struct diff_flags` structure is essentially an array of flags, all
of which have the same type. We can thus use `sizeof()` to iterate
through all of the flags, which we do in `diff_flags_or()`. But while
the statement returns an unsigned integer, we used a signed integer to
iterate through the flags, which generates a warning.
Fix this by using `size_t` for the index instead.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The convention to calling into built-in command implementation has
been updated to pass the repository, if known, together with the
prefix value.
* jc/pass-repo-to-builtins:
add: pass in repo variable instead of global the_repository
builtin: remove USE_THE_REPOSITORY for those without the_repository
builtin: remove USE_THE_REPOSITORY_VARIABLE from builtin.h
builtin: add a repository parameter for builtin functions
|
|
Instead of including USE_THE_REPOSITORY_VARIABLE by default on every
builtin, remove it from builtin.h and add it to all the builtins that
include builtin.h (by definition, that means all builtins/*.c).
Also, remove the include statement for repository.h since it gets
brought in through builtin.h.
The next step will be to migrate each builtin
from having to use the_repository.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In order to reduce the usage of the global the_repository, add a
parameter to builtin functions that will get passed a repository
variable.
This commit uses UNUSED on most of the builtin functions, as subsequent
commits will modify the actual builtins to pass the repository parameter
down.
Signed-off-by: John Cai <johncai86@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `get_git_work_tree()` function retrieves the path of the work tree
of `the_repository`. Make it accept a `struct repository` such that it
can work on arbitrary repositories and make it part of the repository
subsystem. This reduces our reliance on `the_repository` and clarifies
scope.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The refs API lost functions that implicitly assumes to work on the
primary ref_store by forcing the callers to pass a ref_store as an
argument.
* ps/refs-without-the-repository:
refs: remove functions without ref store
cocci: apply rules to rewrite callers of "refs" interfaces
cocci: introduce rules to transform "refs" to pass ref store
refs: add `exclude_patterns` parameter to `for_each_fullref_in()`
refs: introduce missing functions that accept a `struct ref_store`
|
|
Apply the rules that rewrite callers of "refs" interfaces to explicitly
pass `struct ref_store`. The resulting patch has been applied with the
`--whitespace=fix` option.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert builtins to use `the_repository->index` instead of `the_index`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git merge-tree" has learned that the three trees involved in the
3-way merge only need to be trees, not necessarily commits.
* js/merge-tree-3-trees:
fill_tree_descriptor(): mark error message for translation
cache-tree: avoid an unnecessary check
Always check `parse_tree*()`'s return value
t4301: verify that merge-tree fails on missing blob objects
merge-ort: do check `parse_tree()`'s return value
merge-tree: fail with a non-zero exit code on missing tree objects
merge-tree: accept 3 trees as arguments
|
|
Otherwise we may easily run into serious crashes: For example, if we run
`init_tree_desc()` directly after a failed `parse_tree()`, we are
accessing uninitialized data or trying to dereference `NULL`.
Note that the `parse_tree()` function already takes care of showing an
error message. The `parse_tree_indirectly()` and
`repo_get_commit_tree()` functions do not, therefore those latter call
sites need to show a useful error message while the former do not.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, (restore, checkout, reset) commands correctly take '@' as a
synonym for 'HEAD'. However, in patch mode different prompts/messages
are given on command line due to patch mode machinery not considering
'@' to be a synonym for 'HEAD' due to literal string comparison with
the word 'HEAD', and therefore assigning patch_mode_($command)_nothead
and triggering reverse mode (-R in diff-index). The NEEDSWORK comment
suggested comparing commit objects to get around this. However, doing
so would also take a non-checked out branch pointing to the same commit
as HEAD, as HEAD. This would cause confusion to the user.
Therefore, after parsing '@', replace it with 'HEAD' as reasonably
early as possible. This also solves another problem of disparity
between 'git checkout HEAD' and 'git checkout @' (latter detaches at
the HEAD commit and the former does not).
Trade-offs:
- Some of the errors would show the revision argument as 'HEAD' when
given '@'. This should be fine, as most users who probably use '@'
would be aware that it is a shortcut for 'HEAD' and most probably
used to use 'HEAD'. There is also relevant documentation in
'gitrevisions' manpage about '@' being the shortcut for 'HEAD'. Also,
the simplicity of the solution far outweighs this cost.
- Consider '@' as a shortcut for 'HEAD' even if 'refs/heads/@' exists
at a different commit. Naming a branch '@' is an obvious foot-gun and
many existing commands already take '@' for 'HEAD' even if
'refs/heads/@' exists at a different commit or does not exist at all
(e.g. 'git log @', 'git push origin @' etc.). Therefore this is an
existing assumption and should not be a problem.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Each of these were checked with
gcc -E -I. ${SOURCE_FILE} | grep ${HEADER_FILE}
to ensure that removing the direct inclusion of the header actually
resulted in that header no longer being included at all (i.e. that
no other header pulled it in transitively).
...except for a few cases where we verified that although the header
was brought in transitively, nothing from it was directly used in
that source file. These cases were:
* builtin/credential-cache.c
* builtin/pull.c
* builtin/send-pack.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Command line parser fix.
* jc/parse-options-reset:
reset: reject --no-(mixed|soft|hard|merge|keep) option
|
|
"git reset --no-mixed" behaved exactly like "git reset --mixed",
which was nonsense.
If there were only two kinds, e.g. "mixed" vs "separate", it might
have made sense to make "git reset --no-mixed" behave identically to
"git reset --separate" and vice-versa, but because we have many
types of reset, let's just forbid "--no-mixed" and negated form of
other types.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reduce reliance on a global state in the config reading API.
* gc/config-context:
config: pass source to config_parser_event_fn_t
config: add kvi.path, use it to evaluate includes
config.c: remove config_reader from configsets
config: pass kvi to die_bad_number()
trace2: plumb config kvi
config.c: pass ctx with CLI config
config: pass ctx with config files
config.c: pass ctx in configsets
config: add ctx arg to config_fn_t
urlmatch.h: use config_fn_t type
config: inline git_color_default_config
|
|
Add a new "const struct config_context *ctx" arg to config_fn_t to hold
additional information about the config iteration operation.
config_context has a "struct key_value_info kvi" member that holds
metadata about the config source being read (e.g. what kind of config
source it is, the filename, etc). In this series, we're only interested
in .kvi, so we could have just used "struct key_value_info" as an arg,
but config_context makes it possible to add/adjust members in the future
without changing the config_fn_t signature. We could also consider other
ways of organizing the args (e.g. moving the config name and value into
config_context or key_value_info), but in my experiments, the
incremental benefit doesn't justify the added complexity (e.g. a
config_fn_t will sometimes invoke another config_fn_t but with a
different config value).
In subsequent commits, the .kvi member will replace the global "struct
config_reader" in config.c, making config iteration a global-free
operation. It requires much more work for the machinery to provide
meaningful values of .kvi, so for now, merely change the signature and
call sites, pass NULL as a placeholder value, and don't rely on the arg
in any meaningful way.
Most of the changes are performed by
contrib/coccinelle/config_fn_ctx.pending.cocci, which, for every
config_fn_t:
- Modifies the signature to accept "const struct config_context *ctx"
- Passes "ctx" to any inner config_fn_t, if needed
- Adds UNUSED attributes to "ctx", if needed
Most config_fn_t instances are easily identified by seeing if they are
called by the various config functions. Most of the remaining ones are
manually named in the .cocci patch. Manual cleanups are still needed,
but the majority of it is trivial; it's either adjusting config_fn_t
that the .cocci patch didn't catch, or adding forward declarations of
"struct config_context ctx" to make the signatures make sense.
The non-trivial changes are in cases where we are invoking a config_fn_t
outside of config machinery, and we now need to decide what value of
"ctx" to pass. These cases are:
- trace2/tr2_cfg.c:tr2_cfg_set_fl()
This is indirectly called by git_config_set() so that the trace2
machinery can notice the new config values and update its settings
using the tr2 config parsing function, i.e. tr2_cfg_cb().
- builtin/checkout.c:checkout_main()
This calls git_xmerge_config() as a shorthand for parsing a CLI arg.
This might be worth refactoring away in the future, since
git_xmerge_config() can call git_default_config(), which can do much
more than just parsing.
Handle them by creating a KVI_INIT macro that initializes "struct
key_value_info" to a reasonable default, and use that to construct the
"ctx" arg.
Signed-off-by: Glen Choo <chooglen@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also made it clear that several .c files depended upon various
things that oidset included, but had omitted the direct #include for
those headers. Add those now.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also made it clear that several .c files that depended upon path.h
were missing a #include for it; add the missing includes while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Note in particular that this reverses the decision made in 118a2e8bde0
("cache: move ensure_full_index() to cache.h", 2021-04-01).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of advice functions, without explicitly
including advice.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
advice.h if they are using it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of trace and trace2 functions, without
explicitly including trace.h or trace2.h. This made it more difficult
to find which files could remove a dependence on cache.h. Make C files
explicitly include trace.h or trace2.h if they are using them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
en/header-split-cache-h
* ab/remove-implicit-use-of-the-repository:
libs: use "struct repository *" argument, not "the_repository"
post-cocci: adjust comments for recent repo_* migration
cocci: apply the "revision.h" part of "the_repository.pending"
cocci: apply the "rerere.h" part of "the_repository.pending"
cocci: apply the "refs.h" part of "the_repository.pending"
cocci: apply the "promisor-remote.h" part of "the_repository.pending"
cocci: apply the "packfile.h" part of "the_repository.pending"
cocci: apply the "pretty.h" part of "the_repository.pending"
cocci: apply the "object-store.h" part of "the_repository.pending"
cocci: apply the "diff.h" part of "the_repository.pending"
cocci: apply the "commit.h" part of "the_repository.pending"
cocci: apply the "commit-reach.h" part of "the_repository.pending"
cocci: apply the "cache.h" part of "the_repository.pending"
cocci: add missing "the_repository" macros to "pending"
cocci: sort "the_repository" rules by header
cocci: fix incorrect & verbose "the_repository" rules
cocci: remove dead rule from "the_repository.pending.cocci"
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"refs.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply the part of "the_repository.pending.cocci" pertaining to
"cache.h".
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git bundle" learned that "-" is a common way to say that the input
comes from the standard input and/or the output goes to the
standard output. It used to work only for output and only from the
root level of the working tree.
* jk/bundle-use-dash-for-stdfiles:
parse-options: use prefix_filename_except_for_dash() helper
parse-options: consistently allocate memory in fix_filename()
bundle: don't blindly apply prefix_filename() to "-"
bundle: document handling of "-" as stdin
bundle: let "-" mean stdin for reading operations
|
|
When handling OPT_FILENAME(), we have to stick the "prefix" (if any) in
front of the filename to make up for the fact that Git has chdir()'d to
the top of the repository. We can do this with prefix_filename(), but
there are a few special cases we handle ourselves.
Unfortunately the memory allocation is inconsistent here; if we do make
it to prefix_filename(), we'll allocate a string which the caller must
free to avoid a leak. But if we hit our special cases, we'll return the
string as-is, and a caller which tries to free it will crash. So there's
no way to win.
Let's consistently allocate, so that callers can do the right thing.
There are now three cases to care about in the function (and hence a
three-armed if/else):
1. we got a NULL input (and should leave it as NULL, though arguably
this is the sign of a bug; let's keep the status quo for now and we
can pick at that scab later)
2. we hit a special case that means we leave the name intact; we
should duplicate the string. This includes our special "-"
matching. Prior to this patch, it also included empty prefixes and
absolute filenames. But we can observe that prefix_filename()
already handles these, so we don't need to detect them.
3. everything else goes to prefix_filename()
I've dropped the "const" from the "char **file" parameter to indicate
that we're allocating, though in practice it's not really important.
This is all being shuffled through a void pointer via opt->value before
it hits code which ever looks at the string. And it's even a bit weird,
because we are really taking _in_ a const string and using the same
out-parameter for a non-const string. A better function signature would
be:
static char *fix_filename(const char *prefix, const char *file);
but that would mean the caller dereferences the double-pointer (and the
NULL check is currently handled inside this function). So I took the
path of least-change here.
Note that we have to fix several callers in this commit, too, or we'll
break the leak-checking tests. These are "new" leaks in the sense that
they are now triggered by the test suite, but these spots have always
been leaky when Git is run in a subdirectory of the repository. I fixed
all of the cases that trigger with GIT_TEST_PASSING_SANITIZE_LEAK. There
may be others in scripts that have other leaks, but we can fix them
later along with those other leaks (and again, you _couldn't_ fix them
before this patch, so this is the necessary first step).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leak fixes.
* ab/various-leak-fixes:
push: free_refs() the "local_refs" in set_refspecs()
push: refactor refspec_append_mapped() for subsequent leak-fix
receive-pack: release the linked "struct command *" list
grep API: plug memory leaks by freeing "header_list"
grep.c: refactor free_grep_patterns()
builtin/merge.c: free "&buf" on "Your local changes..." error
builtin/merge.c: use fixed strings, not "strbuf", fix leak
show-branch: free() allocated "head" before return
commit-graph: fix a parse_options_concat() leak
http-backend.c: fix cmd_main() memory leak, refactor reg{exec,free}()
http-backend.c: fix "dir" and "cmd_arg" leaks in cmd_main()
worktree: fix a trivial leak in prune_worktrees()
repack: fix leaks on error with "goto cleanup"
name-rev: don't xstrdup() an already dup'd string
various: add missing clear_pathspec(), fix leaks
clone: use free() instead of UNLEAK()
commit-graph: use free_commit_graph() instead of UNLEAK()
bundle.c: don't leak the "args" in the "struct child_process"
tests: mark tests as passing with SANITIZE=leak
|
|
Fix memory leaks resulting from a missing clear_pathspec().
- archive.c: Plug a leak in the "struct archiver_args", and
clear_pathspec() the "pathspec" member that the "parse_pathspec_arg()"
call in this function populates.
- builtin/clean.c: Fix a memory leak that's been with us since
893d839970c (clean: convert to use parse_pathspec, 2013-07-14).
- builtin/reset.c: Add clear_pathspec() calls to cmd_reset(),
including to the codepaths where we'd return early.
- builtin/stash.c: Call clear_pathspec() on the pathspec initialized
in push_stash().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the Perl "git-add--interactive" has gone away in the
preceding commit we don't need to pass along our desire for a mode as
a string, and can instead directly use the "enum add_p_mode", see
d2a233cb8b9 (built-in add -p: prepare for patch modes other than
"stage", 2019-12-21) for its introduction.
As a result of that the run_add_interactive() function would become a
trivial wrapper which would only run run_add_i() if a 0 (or now,
"NULL") "patch_mode" was provided. Let's instead remove it, and have
the one callsite that wanted the "NULL" case (interactive_add())
handle it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up around unused function parameters.
* jk/unused-post-2.39:
userdiff: mark unused parameter in internal callback
list-objects-filter: mark unused parameters in virtual functions
diff: mark unused parameters in callbacks
xdiff: mark unused parameter in xdl_call_hunk_func()
xdiff: drop unused parameter in def_ff()
ws: drop unused parameter from ws_blank_line()
list-objects: drop process_gitlink() function
blob: drop unused parts of parse_blob_buffer()
ls-refs: use repository parameter to iterate refs
|
|
Various leak fixes.
* ab/various-leak-fixes:
built-ins: use free() not UNLEAK() if trivial, rm dead code
revert: fix parse_options_concat() leak
cherry-pick: free "struct replay_opts" members
rebase: don't leak on "--abort"
connected.c: free the "struct packed_git"
sequencer.c: fix "opts->strategy" leak in read_strategy_opts()
ls-files: fix a --with-tree memory leak
revision API: call graph_clear() in release_revisions()
unpack-file: fix ancient leak in create_temp_file()
built-ins & libs & helpers: add/move destructors, fix leaks
dir.c: free "ident" and "exclude_per_dir" in "struct untracked_cache"
read-cache.c: clear and free "sparse_checkout_patterns"
commit: discard partial cache before (re-)reading it
{reset,merge}: call discard_index() before returning
tests: mark tests as passing with SANITIZE=leak
|
|
The diff code provides a format_callback interface, but not every
callback needs each parameter (e.g., the "opt" and "data" parameters are
frequently left unused). Likewise for the output_prefix callback, the
low-level change/add_remove interfaces, the callbacks used by
xdi_diff(), etc.
Mark unused arguments in the callback implementations to quiet
-Wunused-parameter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These two built-ins both deal with the index, but weren't discarding
it. In subsequent commits we'll add more free()-ing to discard_index()
that we've missed, but let's first call the existing function.
We can doubtless add discard_index() (or its alias discard_cache()) to
a lot more places, but let's just add it here for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Apply "index-compatibility.pending.cocci" rule to "builtin/*", but
exclude those where we conflict with in-flight changes.
As a result some of them end up using only "the_index", so let's have
them use the more narrow "USE_THE_INDEX_VARIABLE" rather than
"USE_THE_INDEX_COMPATIBILITY_MACROS".
Manual changes not made by coccinelle, that were squashed in:
* Whitespace-wrap argument lists for repo_hold_locked_index(),
repo_read_index_preload() and repo_refresh_and_write_index(), in cases
where the line became too long after the transformation.
* Change "refresh_cache()" to "refresh_index()" in a comment in
"builtin/update-index.c".
* For those whose call was followed by perror("<macro-name>"), change
it to perror("<function-name>"), referring to the new function.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mostly apply the part of "index-compatibility.pending.cocci" that
renames the global variables like "active_nr", which are a shorthand
to referencing (in that case) a struct member as "the_index.cache_nr".
In doing so move more of "index-compatibility.pending.cocci" to
"index-compatibility.cocci".
In the case of "active_nr" we'd have a textual conflict with
"ab/various-leak-fixes" in "next"[1]. Let's exclude that specific case
while moving the rule over from "pending".
1. 407b94280f8 (commit: discard partial cache before (re-)reading it,
2022-11-08)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apply a selection of rules in "index-compatibility.pending.cocci"
tree-wide, and in doing so migrate them to
"index-compatibility.cocci".
As in preceding commits the only manual changes here are the macro
removals in "cache.h", and the update to the '*.cocci" rules. The rest
of the C code changes are the result of applying those updated rules.
Move rules for some rarely used cache compatibility macros from
"index-compatibility.pending.cocci" to "index-compatibility.cocci" and
apply them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 4aab5b46f44 (Make read-cache.c "the_index" free., 2007-04-01)
we've been undergoing a slow migration away from these macros, but
haven't made much progress since f8adbec9fea (cache.h: flip
NO_THE_INDEX_COMPATIBILITY_MACROS switch, 2019-01-24).
Let's move forward a bit by changing the users of those macros that
are rare enough that we can convert them in one go, and then remove
the compatibility shim.
The only manual change to the C code here is to "cache.h", the rest is
all the result of applying the new "index-compatibility.cocci".
Even though it's a one-off, let's keep the coccinelle rules for
now. We'll extend them in subsequent commits, and this will help
anything that's in-flight or out-of-tree to migrate.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Enable the 'skip_cache_tree_update' option in the variants that call
'prime_cache_tree()' after 'unpack_trees()' (specifically, 'git reset
--mixed' and 'git reset --hard'). This avoids redundantly rebuilding the
cache tree in both 'cache_tree_update()' at the end of 'unpack_trees()' and
in 'prime_cache_tree()', resulting in a small (but consistent) performance
improvement. From the newly-added 'p7102-reset.sh' test:
Test before after
--------------------------------------------------------------------
7102.1: reset --hard (...) 2.11(0.40+1.54) 1.97(0.38+1.47) -6.6%
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Method pathspec_needs_expanded_index() in reset.c from 4d1cfc1351
(reset: make --mixed sparse-aware, 2021-11-29) is reusable when we
need to verify if the index needs to be expanded when the command
is utilizing a pathspec rather than a literal path.
Move it to pathspec.h for reusability.
Add a few items to the function so it can better serve its purpose as
a standalone public function:
* Add a check in front so if the index is not sparse, return early since
no expansion is needed.
* It now takes an arbitrary 'struct index_state' pointer instead of
using `the_index` and `active_cache`.
* Add documentation to the function.
Helped-by: Victoria Dye <vdye@github.com>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Shaoxuan Yuan <shaoxuan.yuan02@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the short help output from "git reset -h", the recently added
"--[no-]refresh" option is shown like so:
--refresh skip refreshing the index after reset
which explains what happens when the option is given in the negative
form, i.e. "--no-refresh". We could rephrase the explanation to
read "refresh the index after reset (default)" to hint that the user
can say "--no-refresh" to override the default, but listing the
"--no-refresh" form in the list of options would be more helpful.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Acked-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the 'reset.refresh' option, requiring that users explicitly specify
'--no-refresh' if they want to skip refreshing the index.
The 'reset.refresh' option was introduced in 101cee42dd (reset: introduce
--[no-]refresh option to --mixed, 2022-03-11) as a replacement for the
refresh-skipping behavior originally controlled by 'reset.quiet'.
Although 'reset.refresh=false' functionally served the same purpose as
'reset.quiet=true', it exposed [1] the fact that the existence of a global
"skip refresh" option could potentially cause problems for users. Allowing a
global config option to avoid refreshing the index forces scripts using 'git
reset --mixed' to defensively use '--refresh' if index refresh is expected;
if that option is missing, behavior of a script could vary from user-to-user
without explanation.
Furthermore, globally disabling index refresh in 'reset --mixed' was
initially devised as a passive performance improvement; since the
introduction of the option, other changes have been made to Git (e.g., the
sparse index) with a greater potential performance impact without
sacrificing index correctness. Therefore, we can more aggressively err on
the side of correctness and limit the cases of skipping index refresh to
only when a user specifies the '--no-refresh' option.
[1] https://lore.kernel.org/git/xmqqy2179o3c.fsf@gitster.g/
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the 'reset.quiet' config option, remove '--no-quiet' documentation in
'Documentation/git-reset.txt'. In 4c3abd0551 (reset: add new reset.quiet
config setting, 2018-10-23), 'reset.quiet' was introduced as a way to
globally change the default behavior of 'git reset --mixed' to skip index
refresh.
However, now that '--quiet' does not affect index refresh, 'reset.quiet'
would only serve to globally silence logging. This was not the original
intention of the config setting, and there's no precedent for such a setting
in other commands with a '--quiet' option, so it appears to be obsolete.
In addition to the options & its documentation, remove 'reset.quiet' from
the recommended config for 'scalar'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update '--quiet' to no longer implicitly skip refreshing the index in a
mixed reset. Users now have the ability to explicitly disable refreshing the
index with the '--no-refresh' option, so they no longer need to use
'--quiet' to do so. Moreover, we explicitly remove the refresh-skipping
behavior from '--quiet' because it is completely unrelated to the stated
purpose of the option: "Be quiet, only report errors."
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If using '--quiet' or 'reset.quiet=true', do not print the 'resetnoRefresh'
advice string. For applications that rely on '--quiet' disabling all
non-error logs, the advice message should be suppressed accordingly.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Replace references to '--quiet' with '--no-refresh' in the advice on how to
skip refreshing the index. When the advice was introduced, '--quiet' was the
only way to avoid the expensive 'refresh_index(...)' at the end of a mixed
reset. After introducing '--no-refresh', however, '--quiet' became only a
fallback option for determining refresh behavior, overridden by
'--[no-]refresh' or 'reset.refresh' if either is set. To ensure users are
advised to use the most reliable option for avoiding 'refresh_index(...)',
replace recommendation of '--quiet' with '--[no-]refresh'.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new --[no-]refresh option that is intended to explicitly determine
whether a mixed reset should end in an index refresh.
Starting at 9ac8125d1a (reset: don't compute unstaged changes after reset
when --quiet, 2018-10-23), using the '--quiet' option results in skipping
the call to 'refresh_index(...)' at the end of a mixed reset with the goal
of improving performance. However, by coupling behavior that modifies the
index with the option that silences logs, there is no way for users to have
one without the other (i.e., silenced logs with a refreshed index) without
incurring the overhead of a separate call to 'git update-index --refresh'.
Furthermore, there is minimal user-facing documentation indicating that
--quiet skips the index refresh, potentially leading to unexpected issues
executing commands after 'git reset --quiet' that do not themselves refresh
the index (e.g., internals of 'git stash', 'git read-tree').
To mitigate these issues, '--[no-]refresh' and 'reset.refresh' are
introduced to provide a dedicated mechanism for refreshing the index. When
either is set, '--quiet' and 'reset.quiet' revert to controlling only
whether logs are silenced and do not affect index refresh.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update the advice describing index refresh from "enumerate unstaged changes"
to "refresh the index." Describing 'refresh_index(...)' as "enumerating
unstaged changes" is not fully representative of what an index refresh is
doing; more generally, it updates the properties of index entries that are
affected by outside-of-index state, e.g. CE_UPTODATE, which is affected by
the file contents on-disk. This distinction is relevant to operations that
read the index but do not refresh first - e.g., 'git read-tree' - where a
stale index may cause incorrect behavior.
In addition to changing the advice message, use the "advise" function to
print advice.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leakfixes.
* ab/diff-free-more:
diff.[ch]: have diff_free() free options->parseopts
diff.[ch]: have diff_free() call clear_pathspec(opts.pathspec)
|
|
"git update-index", "git checkout-index", and "git clean" are
taught to work better with the sparse checkout feature.
* vd/sparse-clean-etc:
update-index: reduce scope of index expansion in do_reupdate
update-index: integrate with sparse index
update-index: add tests for sparse-checkout compatibility
checkout-index: integrate with sparse index
checkout-index: add --ignore-skip-worktree-bits option
checkout-index: expand sparse checkout compatibility tests
clean: integrate with sparse index
reset: reorder wildcard pathspec conditions
reset: fix validation in sparse index test
|
|
Have the diff_free() function call clear_pathspec(). Since the
diff_flush() function calls this all its callers can be simplified to
rely on it instead.
When I added the diff_free() function in e900d494dcf (diff: add an API
for deferred freeing, 2021-02-11) I simply missed this, or wasn't
interested in it. Let's consolidate this now. This means that any
future callers (and I've got revision.c in mind) that embed a "struct
diff_options" can simply call diff_free() instead of needing know that
it has an embedded pathspec.
This does fix a bunch of leaks, but I can't mark any test here as
passing under the SANITIZE=leak testing mode because in
886e1084d78 (builtin/: add UNLEAKs, 2017-10-01) an UNLEAK(rev) was
added, which plasters over the memory
leak. E.g. "t4011-diff-symlink.sh" would report fewer leaks with this
fix, but because of the UNLEAK() reports none.
I'll eventually loop around to removing that UNLEAK(rev) annotation as
I'll fix deeper issues with the revisions API leaking. This is one
small step on the way there, a new freeing function in revisions.c
will want to call this diff_free().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rearrange conditions in method determining whether index expansion is
necessary when a pathspec is specified for `git reset`, placing less
expensive condition first. Additionally, add details & examples to related
code comments to help with readability.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Even if some of these messages are not subject to gettext i18n, this
helps bring a single style of message for a given error type.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
They are all replaced by "the option '%s' requires '%s'", which is a
new string but replaces 17 previous unique strings.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Various operating modes of "git reset" have been made to work
better with the sparse index.
* vd/sparse-reset:
unpack-trees: improve performance of next_cache_entry
reset: make --mixed sparse-aware
reset: make sparse-aware (except --mixed)
reset: integrate with sparse index
reset: expand test coverage for sparse checkouts
sparse-index: update command for expand/collapse test
reset: preserve skip-worktree bit in mixed reset
reset: rename is_missing to !is_in_reset_tree
|
|
Remove the `ensure_full_index` guard on `read_from_tree` and update `git
reset --mixed` to ensure it can use sparse directory index entries wherever
possible. Sparse directory entries are reset using `diff_tree_oid`, which
requires `change` and `add_remove` functions to process the internal
contents of the sparse directory. The `recursive` diff option handles cases
in which `reset --mixed` must diff/merge files that are nested multiple
levels deep in a sparse directory.
The use of pathspecs with `git reset --mixed` introduces scenarios in which
internal contents of sparse directories may be matched by the pathspec. In
order to reset *all* files in the repo that may match the pathspec, the
following conditions on the pathspec require index expansion before
performing the reset:
* "magic" pathspecs
* wildcard pathspecs that do not match only in-cone files or entire sparse
directories
* literal pathspecs matching something outside the sparse checkout
definition
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Disable `command_requires_full_index` repo setting and add
`ensure_full_index` guards around code paths that cannot yet use sparse
directory index entries. `reset --soft` does not modify the index, so no
compatibility changes are needed for it to function without expanding the
index. For all other reset modes (`--mixed`, `--hard`, `--keep`, `--merge`),
the full index is expanded to prevent cache tree corruption and invalid
variable accesses.
Additionally, the `read_cache()` check verifying an uncorrupted index is
moved after argument parsing and preparing the repo settings. The index is
not used by the preceding argument handling, but `read_cache()` must be run
*after* enabling sparse index for the command (so that the index is not
expanded unnecessarily) and *before* using the index for reset (so that it
is verified as uncorrupted).
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change `update_index_from_diff` to set `skip-worktree` when applicable for
new index entries. When `git reset --mixed <tree-ish>` is run, entries in
the index with differences between the pre-reset HEAD and reset <tree-ish>
are identified and handled with `update_index_from_diff`. For each file, a
new cache entry in inserted into the index, created from the <tree-ish> side
of the reset (without changing the working tree). However, the newly-created
entry must have `skip-worktree` explicitly set in either of the following
scenarios:
1. the file is in the current index and has `skip-worktree` set
2. the file is not in the current index but is outside of a defined sparse
checkout definition
Not setting the `skip-worktree` bit leads to likely-undesirable results for
a user. It causes `skip-worktree` settings to disappear on the
"diff"-containing files (but *only* the diff-containing files), leading to
those files now showing modifications in `git status`. For example, when
running `git reset --mixed` in a sparse checkout, some file entries outside
of sparse checkout could show up as deleted, despite the user never deleting
anything (and not wanting them on-disk anyway).
Additionally, add a test to `t7102` to ensure `skip-worktree` is preserved
in a basic `git reset --mixed` scenario and update a failure-documenting
test from 19a0acc (t1092: test interesting sparse-checkout scenarios,
2021-01-23) with new expected behavior.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rename and invert value of `is_missing` to `is_in_reset_tree` to make the
variable more descriptive of what it represents.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Traditionally, unpack_trees_options->reset was used to signal that it
was okay to delete any untracked files in the way. This was used by
`git read-tree --reset`, but then started appearing in other places as
well. However, many of the other uses should not be deleting untracked
files in the way. Change this value to an enum so that a value of 1
(i.e. "true") can be split into two:
UNPACK_RESET_PROTECT_UNTRACKED,
UNPACK_RESET_OVERWRITE_UNTRACKED
In order to catch accidental misuses (i.e. where folks call it the way
they traditionally used to), define the special enum value of
UNPACK_RESET_INVALID = 1
which will trigger a BUG().
Modify existing callers so that
read-tree --reset
reset --hard
checkout --force
continue using the UNPACK_RESET_OVERWRITE_UNTRACKED logic, while other
callers, including
am
checkout without --force
stash (though currently dead code; reset always had a value of 0)
numerous callers from rebase/sequencer to reset_head()
will use the new UNPACK_RESET_PROTECT_UNTRACKED value.
Also, note that it has been reported that 'git checkout <treeish>
<pathspec>' currently also allows overwriting untracked files[1]. That
case should also be fixed, but it does not use unpack_trees() and thus
is outside the scope of the current changes.
[1] https://lore.kernel.org/git/15dad590-087e-5a48-9238-5d2826950506@gmail.com/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change several commands to remove ignored files by default when they are
in the way. Since some commands (checkout, merge) take a
--no-overwrite-ignore option to allow the user to configure this, and it
may make sense to add that option to more commands (and in the case of
merge, actually plumb that configuration option through to more of the
backends than just the fast-forwarding special case), add little
comments about where such flags would be used.
Incidentally, this fixes a test failure in t7112.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, every caller of unpack_trees() that wants to ensure ignored
files are overwritten by default needs to:
* allocate unpack_trees_options.dir
* flip the DIR_SHOW_IGNORED flag in unpack_trees_options.dir->flags
* call setup_standard_excludes
AND then after the call to unpack_trees() needs to
* call dir_clear()
* deallocate unpack_trees_options.dir
That's a fair amount of boilerplate, and every caller uses identical
code. Make this easier by instead introducing a new boolean value where
the default value (0) does what we want so that new callers of
unpack_trees() automatically get the appropriate behavior. And move all
the handling of unpack_trees_options.dir into unpack_trees() itself.
While preserve_ignored = 0 is the behavior we feel is the appropriate
default, we defer fixing commands to use the appropriate default until a
later commit. So, this commit introduces several locations where we
manually set preserve_ignored=1. This makes it clear where code paths
were previously preserving ignored files when they should not have been;
a future commit will flip these to instead use a value of 0 to get the
behavior we want.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In c4a09cc9ccb (Merge branch 'hw/advise-ng', 2020-03-25), a new API for
accessing advice variables was introduced and deprecated `advice_config`
in favor of a new array, `advice_setting`.
This patch ports all but two uses which read the status of the global
`advice_` variables over to the new `advice_enabled` API. We'll deal
with advice_add_embedded_repo and advice_graft_file_deprecated
separately.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
dwim_ref() allocs a new string into ref. Instead of setting to NULL to
discard it, we can FREE_AND_NULL.
This leak appears to have been introduced in:
4cf76f6bbf (builtin/reset: compute checkout metadata for reset, 2020-03-16)
This leak was found when running t0001 with LSAN, see also LSAN output below:
Direct leak of 5 byte(s) in 1 object(s) allocated from:
#0 0x486514 in strdup /home/abuild/rpmbuild/BUILD/llvm-11.0.0.src/build/../projects/compiler-rt/lib/asan/asan_interceptors.cpp:452:3
#1 0x9a7108 in xstrdup /home/ahunt/oss-fuzz/git/wrapper.c:29:14
#2 0x8add6b in expand_ref /home/ahunt/oss-fuzz/git/refs.c:670:12
#3 0x8ad777 in repo_dwim_ref /home/ahunt/oss-fuzz/git/refs.c:644:22
#4 0x6394af in dwim_ref /home/ahunt/oss-fuzz/git/./refs.h:162:9
#5 0x637e5c in cmd_reset /home/ahunt/oss-fuzz/git/builtin/reset.c:426:4
#6 0x4cd60d in run_builtin /home/ahunt/oss-fuzz/git/git.c:453:11
#7 0x4cb2da in handle_builtin /home/ahunt/oss-fuzz/git/git.c:704:3
#8 0x4ccc37 in run_argv /home/ahunt/oss-fuzz/git/git.c:771:4
#9 0x4cac29 in cmd_main /home/ahunt/oss-fuzz/git/git.c:902:19
#10 0x69c5ce in main /home/ahunt/oss-fuzz/git/common-main.c:52:11
#11 0x7f57ebb9d349 in __libc_start_main (/lib64/libc.so.6+0x24349)
Signed-off-by: Andrzej Hunt <ajrhunt@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a user checks out the upstream branch of HEAD, the upstream branch
not being a local branch, and then runs "git status", like this:
git clone $URL client
cd client
git checkout @{u}
git status
no status is printed, but instead an error message:
fatal: HEAD does not point to a branch
(This error message when running "git branch" persists even after
checking out other things - it only stops after checking out a branch.)
This is because "git status" reads the reflog when determining the "HEAD
detached" message, and thus attempts to DWIM "@{u}", but that doesn't
work because HEAD no longer points to a branch.
Therefore, when calculating the status of a worktree, tolerate dangling
marks. This is done by adding an additional parameter to
dwim_ref() and repo_dwim_ref().
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the codebase, there are many options which use OPTION_CALLBACK in a
plain ol' struct definition. However, we have the OPT_CALLBACK and
OPT_CALLBACK_F macros which are meant to abstract these plain struct
definitions away. These macros are useful as they semantically signal to
developers that these are just normal callback option with nothing fancy
happening.
Replace plain struct definitions of OPTION_CALLBACK with OPT_CALLBACK or
OPT_CALLBACK_F where applicable. The heavy lifting was done using the
following (disgusting) shell script:
#!/bin/sh
do_replacement () {
tr '\n' '\r' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\s*0,\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK(\1,\2,\3,\4,\5,\6)/g' |
sed -e 's/{\s*OPTION_CALLBACK,\s*\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\([^,]*\),\(\s*[^[:space:]}]*\)\s*}/OPT_CALLBACK_F(\1,\2,\3,\4,\5,\6,\7)/g' |
tr '\r' '\n'
}
for f in $(git ls-files \*.c)
do
do_replacement <"$f" >"$f.tmp"
mv "$f.tmp" "$f"
done
The result was manually inspected and then reformatted to match the
style of the surrounding code. Finally, using
`git grep OPTION_CALLBACK \*.c`, leftover results which were not handled
by the script were manually transformed.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pass the commit, and if we have it, the ref to the filters when we
perform a checkout. This should only be the case when we invoke git
reset --hard; the metadata will be unused otherwise.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few commands learned to take the pathspec from the
standard input or a named file, instead of taking it as the command
line arguments.
* am/pathspec-from-file:
commit: support the --pathspec-from-file option
doc: commit: synchronize <pathspec> description
reset: support the `--pathspec-from-file` option
doc: reset: synchronize <pathspec> description
pathspec: add new function to parse file
parse-options.h: add new options `--pathspec-from-file`, `--pathspec-file-nul`
|
|
Since 2f328c3d ("reset $sha1 $pathspec: require $sha1 only to be
treeish", 2013-01-14), we allowed "git reset $object -- $path" to reset
individual paths that match the pathspec to take the blob from a tree
object, not necessarily a commit, while the form to reset the tip of the
current branch to some other commit still must be given a commit.
Like resetting with paths, "git reset --patch" does not update HEAD, and
need not require a commit. The path-filtered form, "git reset --patch
$object -- $pathspec", has accepted a tree-ish since 2f328c3d.
"git reset --patch" is documented as accepting a <tree-ish> since
bf44142f ("reset: update documentation to require only tree-ish with
paths", 2013-01-16). Documentation changes are not required.
Loosen the restriction that requires a commit for the unfiltered "git
reset --patch $object".
Signed-off-by: Nika Layzell <nika@thelayzells.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Decisions taken for simplicity:
1) For now, `--pathspec-from-file` is declared incompatible with
`--patch`, even when <file> is not `stdin`. Such use case it not
really expected. Also, it is harder to support in `git commit`, so
I decided to make it incompatible in all places.
2) It is not allowed to pass pathspec in both args and file.
Co-authored-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`git add` shows an example of good writing, follow it.
Signed-off-by: Alexandr Miloslavskiy <alexandr.miloslavskiy@syntevo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The tree-walk API learned to pass an in-core repository
instance throughout more codepaths.
* nd/tree-walk-with-repo:
t7814: do not generate same commits in different repos
Use the right 'struct repository' instead of the_repository
match-trees.c: remove the_repo from shift_tree*()
tree-walk.c: remove the_repo from get_tree_entry_follow_symlinks()
tree-walk.c: remove the_repo from get_tree_entry()
tree-walk.c: remove the_repo from fill_tree_descriptor()
sha1-file.c: remove the_repo from read_object_with_reference()
|
|
Two new commands "git switch" and "git restore" are introduced to
split "checking out a branch to work on advancing its history" and
"checking out paths out of the index and/or a tree-ish to work on
advancing the current history" out of the single "git checkout"
command.
* nd/switch-and-restore: (46 commits)
completion: disable dwim on "git switch -d"
switch: allow to switch in the middle of bisect
t2027: use test_must_be_empty
Declare both git-switch and git-restore experimental
help: move git-diff and git-reset to different groups
doc: promote "git restore"
user-manual.txt: prefer 'merge --abort' over 'reset --hard'
completion: support restore
t: add tests for restore
restore: support --patch
restore: replace --force with --ignore-unmerged
restore: default to --source=HEAD when only --staged is specified
restore: reject invalid combinations with --staged
restore: add --worktree and --staged
checkout: factor out worktree checkout code
restore: disable overlay mode by default
restore: make pathspec mandatory
restore: take tree-ish from --source option instead
checkout: split part of it to new command 'restore'
doc: promote "git switch"
...
|
|
While at there, clean up the_repo usage in builtin/merge-tree.c a tiny
bit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new hook "post-index-change" is called when the on-disk index
file changes, which can help e.g. a virtualized working tree
implementation.
* bp/post-index-change-hook:
read-cache: add post-index-change hook
|
|
After a successful switch, if a merge, cherry-pick or revert is ongoing,
it is canceled. This behavior has been with us from the very early
beginning, soon after git-merge was created but never actually
documented [1]. It may be a good idea to be transparent and tell the
user if some operation is canceled.
I consider this a better way of telling the user than just adding a
sentence or two in git-checkout.txt, which will be mostly ignored
anyway.
PS. Originally I wanted to print more details like
warning: cancelling an in-progress merge from <SHA-1>
which may allow some level of undo if the user wants to. But that seems
a lot more work. Perhaps it can be improved later if people still want
that.
[1] ... and I will try not to argue whether it is a sensible behavior.
There is some more discussion here if people are interested:
CACsJy8Axa5WsLSjiscjnxVK6jQHkfs-gH959=YtUvQkWriAk5w@mail.gmail.com
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a post-index-change hook that is invoked after the index is written in
do_write_locked_index().
This hook is meant primarily for notification, and cannot affect
the outcome of git commands that trigger the index write.
The hook is passed a flag to indicate whether the working directory was
updated or not and a flag indicating if a skip-worktree bit could have
changed. These flags enable the hook to optimize its response to the
index change notification.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More codepaths become aware of working with in-core repository
instance other than the default "the_repository".
* nd/the-index: (22 commits)
rebase-interactive.c: remove the_repository references
rerere.c: remove the_repository references
pack-*.c: remove the_repository references
pack-check.c: remove the_repository references
notes-cache.c: remove the_repository references
line-log.c: remove the_repository reference
diff-lib.c: remove the_repository references
delta-islands.c: remove the_repository references
cache-tree.c: remove the_repository references
bundle.c: remove the_repository references
branch.c: remove the_repository reference
bisect.c: remove the_repository reference
blame.c: remove implicit dependency the_repository
sequencer.c: remove implicit dependency on the_repository
sequencer.c: remove implicit dependency on the_index
transport.c: remove implicit dependency on the_index
notes-merge.c: remove implicit dependency the_repository
notes-merge.c: remove implicit dependency on the_index
list-objects.c: reduce the_repository references
list-objects-filter.c: remove implicit dependency on the_index
...
|
|
This case is more interesting than other boring "remove the_repo"
commits because while we need access to the object database, we cannot
simply use r->index because unpack-trees.c can operate on a temporary
index, not $GIT_DIR/index. Ideally we should be able to pass an object
database to lookup_tree() but that ship has sailed.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
refresh_index() is done after a reset command as an optimization. Because
it can be an expensive call, warn the user if it takes more than 2 seconds
and tell them how to avoid it using the --quiet command line option or
reset.quiet config setting.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a reset.quiet config setting that sets the default value of the --quiet
flag when running the reset command. This enables users to change the
default behavior to take advantage of the performance advantages of
avoiding the scan for unstaged changes after reset. Defaults to false.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When git reset is run with the --quiet flag, don't bother finding any
additional unstaged changes as they won't be output anyway. This speeds up
the git reset command by avoiding having to lstat() every file looking for
changes that aren't going to be reported anyway.
The savings can be significant. In a repo on Windows with 200K files
"git reset" drops from 7.16 seconds to 0.32 seconds for a savings of 96%.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
diff and textconv code has so widespread use that it's hard to simply
update their api and all call sites at once because it would result in
a big patch. For now reduce the_index references to two places:
diff_setup() and fill_textconv().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For a large tree, the index needs to hold many cache entries
allocated on heap. These cache entries are now allocated out of a
dedicated memory pool to amortize malloc(3) overhead.
* jm/cache-entry-from-mem-pool:
block alloc: add validations around cache_entry lifecyle
block alloc: allocate cache entries from mem_pool
mem-pool: fill out functionality
mem-pool: add life cycle management functions
mem-pool: only search head block for available space
block alloc: add lifecycle APIs for cache_entry structs
read-cache: teach make_cache_entry to take object_id
read-cache: teach refresh_cache_entry to take istate
|
|
It has been observed that the time spent loading an index with a large
number of entries is partly dominated by malloc() calls. This change
is in preparation for using memory pools to reduce the number of
malloc() calls made to allocate cahce entries when loading an index.
Add an API to allocate and discard cache entries, abstracting the
details of managing the memory backing the cache entries. This commit
does actually change how memory is managed - this will be done in a
later commit in the series.
This change makes the distinction between cache entries that are
associated with an index and cache entries that are not associated with
an index. A main use of cache entries is with an index, and we can
optimize the memory management around this. We still have other cases
where a cache entry is not persisted with an index, and so we need to
handle the "transient" use case as well.
To keep the congnitive overhead of managing the cache entries, there
will only be a single discard function. This means there must be enough
information kept with the cache entry so that we know how to discard
them.
A summary of the main functions in the API is:
make_cache_entry: create cache entry for use in an index. Uses specified
parameters to populate cache_entry fields.
make_empty_cache_entry: Create an empty cache entry for use in an index.
Returns cache entry with empty fields.
make_transient_cache_entry: create cache entry that is not used in an
index. Uses specified parameters to populate
cache_entry fields.
make_empty_transient_cache_entry: create cache entry that is not used in
an index. Returns cache entry with
empty fields.
discard_cache_entry: A single function that knows how to discard a cache
entry regardless of how it was allocated.
Signed-off-by: Jameson Miller <jamill@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach make_cache_entry function to take object_id instead of a SHA-1.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow callers of lookup_commit_reference
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sb/object-store-grafts:
commit: allow lookup_commit_graft to handle arbitrary repositories
commit: allow prepare_commit_graft to handle arbitrary repositories
shallow: migrate shallow information into the object parser
path.c: migrate global git_path_* to take a repository argument
cache: convert get_graft_file to handle arbitrary repositories
commit: convert read_graft_file to handle arbitrary repositories
commit: convert register_commit_graft to handle arbitrary repositories
commit: convert commit_graft_pos() to handle arbitrary repositories
shallow: add repository argument to is_repository_shallow
shallow: add repository argument to check_shallow_file_for_update
shallow: add repository argument to register_shallow
shallow: add repository argument to set_alternate_shallow_file
commit: add repository argument to lookup_commit_graft
commit: add repository argument to prepare_commit_graft
commit: add repository argument to read_graft_file
commit: add repository argument to register_commit_graft
commit: add repository argument to commit_graft_pos
object: move grafts to object parser
object-store: move object access functions to object-store.h
|
|
Migrate all git_path_* functions that are defined in path.c to take a
repository argument. Unlike other patches in this series, do not use the
#define trick, as we rewrite the whole function, which is rather small.
This doesn't migrate all the functions, as other builtins have their own
local path functions defined using GIT_PATH_FUNC. So keep that macro
around to serve the other locations.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the last use of EMPTY_TREE_SHA1_BIN to use a direct copy from
the_hash_algo->empty_tree to avoid a dependency on a given hash
algorithm.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert find_unique_abbrev and find_unique_abbrev_r to each take a
pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The way "git reset --hard" reports the commit the updated HEAD
points at is made consistent with the way how the commit title is
generated by the other parts of the system. This matters when the
title is spread across physically multiple lines.
* tg/reset-hard-show-head-with-pretty:
reset --hard: make use of the pretty machinery
|
|
reset --hard currently uses its own logic for printing the first line of
the commit message in its output. Instead of just using the first line,
use the pretty machinery to create the output.
In addition to the easier to follow code, this makes the output more
consistent with other commands that print the title of the commit, such
as 'git commit --oneline' or 'git checkout', which both use
'pp_commit_easy()' with the CMIT_FMT_ONELINE modifier.
It is a slight change of the output if the second line of the commit
message is not a blank line, i.e. if the commit message is
foo
bar
previously we would print "HEAD is now at 000000 foo", while after
this change we print "HEAD is now at 000000 foo bar", same as 'git log
--oneline' shows "000000 foo bar".
So this does make the output more consistent with other commands, and
'reset' is a porcelain command, so nobody should be parsing the output
in scripts.
The current behaviour dates back to 0e5a7faa3a ("Make "git reset" a
builtin.", 2007-09-11), so I assume (without digging into the old
codebase too much) that the logic was implemented because there was
no convenience function such as 'pp_commit_easy' that would do this
already.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* ot/pretty:
format: create docs for pretty.h
format: create pretty.h file
|
|
Create header for pretty.c to make formatting interface more structured.
This is a middle point, this file would be merged further with other
files which contain formatting stuff.
Signed-off-by: Olga Telezhnaia <olyatelezhnaya@gmail.com>
Mentored-by: Christian Couder <christian.couder@gmail.com>
Mentored by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A single-word "unsigned flags" in the diff options is being split
into a structure with many bitfields.
* bw/diff-opt-impl-to-bitfields:
diff: make struct diff_flags members lowercase
diff: remove DIFF_OPT_CLR macro
diff: remove DIFF_OPT_SET macro
diff: remove DIFF_OPT_TST macro
diff: remove touched flags
diff: add flag to indicate textconv was set via cmdline
diff: convert flags to be stored in bitfields
add, reset: use DIFF_OPT_SET macro to set a diff flag
|
|
Now that the flags stored in struct diff_flags are being accessed
directly and not through macros, change all struct members from being
uppercase to lowercase.
This conversion is done using the following semantic patch:
@@
expression E;
@@
- E.RECURSIVE
+ E.recursive
@@
expression E;
@@
- E.TREE_IN_RECURSIVE
+ E.tree_in_recursive
@@
expression E;
@@
- E.BINARY
+ E.binary
@@
expression E;
@@
- E.TEXT
+ E.text
@@
expression E;
@@
- E.FULL_INDEX
+ E.full_index
@@
expression E;
@@
- E.SILENT_ON_REMOVE
+ E.silent_on_remove
@@
expression E;
@@
- E.FIND_COPIES_HARDER
+ E.find_copies_harder
@@
expression E;
@@
- E.FOLLOW_RENAMES
+ E.follow_renames
@@
expression E;
@@
- E.RENAME_EMPTY
+ E.rename_empty
@@
expression E;
@@
- E.HAS_CHANGES
+ E.has_changes
@@
expression E;
@@
- E.QUICK
+ E.quick
@@
expression E;
@@
- E.NO_INDEX
+ E.no_index
@@
expression E;
@@
- E.ALLOW_EXTERNAL
+ E.allow_external
@@
expression E;
@@
- E.EXIT_WITH_STATUS
+ E.exit_with_status
@@
expression E;
@@
- E.REVERSE_DIFF
+ E.reverse_diff
@@
expression E;
@@
- E.CHECK_FAILED
+ E.check_failed
@@
expression E;
@@
- E.RELATIVE_NAME
+ E.relative_name
@@
expression E;
@@
- E.IGNORE_SUBMODULES
+ E.ignore_submodules
@@
expression E;
@@
- E.DIRSTAT_CUMULATIVE
+ E.dirstat_cumulative
@@
expression E;
@@
- E.DIRSTAT_BY_FILE
+ E.dirstat_by_file
@@
expression E;
@@
- E.ALLOW_TEXTCONV
+ E.allow_textconv
@@
expression E;
@@
- E.TEXTCONV_SET_VIA_CMDLINE
+ E.textconv_set_via_cmdline
@@
expression E;
@@
- E.DIFF_FROM_CONTENTS
+ E.diff_from_contents
@@
expression E;
@@
- E.DIRTY_SUBMODULES
+ E.dirty_submodules
@@
expression E;
@@
- E.IGNORE_UNTRACKED_IN_SUBMODULES
+ E.ignore_untracked_in_submodules
@@
expression E;
@@
- E.IGNORE_DIRTY_SUBMODULES
+ E.ignore_dirty_submodules
@@
expression E;
@@
- E.OVERRIDE_SUBMODULE_CONFIG
+ E.override_submodule_config
@@
expression E;
@@
- E.DIRSTAT_BY_LINE
+ E.dirstat_by_line
@@
expression E;
@@
- E.FUNCCONTEXT
+ E.funccontext
@@
expression E;
@@
- E.PICKAXE_IGNORE_CASE
+ E.pickaxe_ignore_case
@@
expression E;
@@
- E.DEFAULT_FOLLOW_RENAMES
+ E.default_follow_renames
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the `DIFF_OPT_SET` macro and instead set the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_SET(&E, fld)
+ E.flags.fld = 1
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_SET(ptr, fld)
+ ptr->flags.fld = 1
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of explicitly setting the 'DIFF_OPT_OVERRIDE_SUBMODULE_CONFIG'
flag, use the 'DIFF_OPT_SET' macro.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert update_ref, refs_update_ref, and write_pseudoref to use struct
object_id. Update the existing callers as well. Remove update_ref_oid,
as it is no longer needed.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert delete_ref and refs_delete_ref to take a pointer to struct
object_id. Update the documentation accordingly, including referring to
null_oid in lowercase, as it is not a #define constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many of our programs consider that it is OK to release dynamic
storage that is used throughout the life of the program by simply
exiting, but this makes it harder to leak detection tools to avoid
reporting false positives. Plug many existing leaks and introduce
a mechanism for developers to mark that the region of memory
pointed by a pointer is not lost/leaking to help these tools.
* jk/leak-checkers:
add UNLEAK annotation for reducing leak false positives
set_git_dir: handle feeding gitdir to itself
repository: free fields before overwriting them
reset: free allocated tree buffers
reset: make tree counting less confusing
config: plug user_config leak
update-index: fix cache entry leak in add_one_file()
add: free leaked pathspec after add_files_to_cache()
test-lib: set LSAN_OPTIONS to abort by default
test-lib: --valgrind should not override --verbose-log
|
|
We read the tree objects with fill_tree_descriptor(), but
never actually free the resulting buffers, causing a memory
leak. This isn't a huge deal because we call this code at
most twice per program invocation. But it does potentially
double our heap usage if you have large root trees. Let's
free the trees before returning.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Depending on whether we're in --keep mode, git-reset may
feed one or two trees to unpack_trees(). We start a counter
at "1" and then increment it to "2" only for the two-tree
case. But that means we must always subtract one to find the
correct array slot to fill with each descriptor.
Instead, let's start at "0" and just increment our counter
after adding each tree. This skips the extra subtraction,
and will make things much easier when we start to actually
free our tree buffers.
While we're at it, let's make the first allocation use the
slot at "desc + nr", too, even though we know "nr" is 0 at
that point. It makes the two fill_tree_descriptor() calls
consistent (always "desc + nr", followed by always
incrementing "nr").
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that it's safe to declare a "struct lock_file" on the
stack, we can do so (and avoid an intentional leak). These
leaks were found by running t0000 and t0001 under valgrind
(though certainly other similar leaks exist and just don't
happen to be exercised by those tests).
Initializing the lock_file's inner tempfile with NULL is not
strictly necessary in these cases, but it's a good practice
to model. It means that if we were to call a function like
rollback_lock_file() on a lock that was never taken in the
first place, it becomes a quiet noop (rather than undefined
behavior).
Likewise, it's always safe to rollback_lock_file() on a file
that has already been committed or deleted, since that
operation is a noop on an inactive lockfile (and that's why
the case in config.c can drop the "if (lock)" check as we
move away from using a pointer).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up to avoid mixing values read from the .gitmodules file
and values read from the .git/config file.
* bw/submodule-config-cleanup:
submodule: remove gitmodules_config
unpack-trees: improve loading of .gitmodules
submodule-config: lazy-load a repository's .gitmodules file
submodule-config: move submodule-config functions to submodule-config.c
submodule-config: remove support for overlaying repository config
diff: stop allowing diff to have submodules configured in .git/config
submodule: remove submodule_config callback routine
unpack-trees: don't respect submodule.update
submodule: don't rely on overlayed config when setting diffopts
fetch: don't overlay config with submodule-config
submodule--helper: don't overlay config in update-clone
submodule--helper: don't overlay config in remote_submodule_branch
add, reset: ensure submodules can be added or reset
submodule: don't use submodule_from_name
t7411: check configuration parsing errors
|
|
All callers of fill_tree_descriptor() have been converted to object_id
already, so convert that function as well. As a nice side-effect we get
rid of NULL checks in tree-diff.c, as fill_tree_descriptor() already
does them for us.
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the submodule-config subsystem can lazily read the gitmodules
file we no longer need to explicitly pre-read the gitmodules by calling
'gitmodules_config()' so let's remove it.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit aee9c7d65 (Submodules: Add the new "ignore" config option for
diff and status) introduced the ignore configuration option for
submodules so that configured submodules could be omitted from the
status and diff commands. Because this flag is respected in the diff
machinery it has the unintended consequence of potentially prohibiting
users from adding or resetting a submodule, even when a path to the
submodule is explicitly given.
Ensure that submodules can be added or set, even if they are configured
to be ignored, by setting the `DIFF_OPT_OVERRIDE_SUBMODULE_CONFIG` diff
flag.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that all the callers of get_sha1 directly or indirectly use struct
object_id, rename the functions starting with get_sha1 to start with
get_oid. Convert the internals in sha1_name.c to use struct object_id
as well, and eliminate explicit length checks where possible. Convert a
use of 40 in get_oid_basic to GIT_SHA1_HEXSZ.
Outside of sha1_name.c and cache.h, this transition was made with the
following semantic patch:
@@
expression E1, E2;
@@
- get_sha1(E1, E2.hash)
+ get_oid(E1, &E2)
@@
expression E1, E2;
@@
- get_sha1(E1, E2->hash)
+ get_oid(E1, E2)
@@
expression E1, E2;
@@
- get_sha1_committish(E1, E2.hash)
+ get_oid_committish(E1, &E2)
@@
expression E1, E2;
@@
- get_sha1_committish(E1, E2->hash)
+ get_oid_committish(E1, E2)
@@
expression E1, E2;
@@
- get_sha1_treeish(E1, E2.hash)
+ get_oid_treeish(E1, &E2)
@@
expression E1, E2;
@@
- get_sha1_treeish(E1, E2->hash)
+ get_oid_treeish(E1, E2)
@@
expression E1, E2;
@@
- get_sha1_commit(E1, E2.hash)
+ get_oid_commit(E1, &E2)
@@
expression E1, E2;
@@
- get_sha1_commit(E1, E2->hash)
+ get_oid_commit(E1, E2)
@@
expression E1, E2;
@@
- get_sha1_tree(E1, E2.hash)
+ get_oid_tree(E1, &E2)
@@
expression E1, E2;
@@
- get_sha1_tree(E1, E2->hash)
+ get_oid_tree(E1, E2)
@@
expression E1, E2;
@@
- get_sha1_blob(E1, E2.hash)
+ get_oid_blob(E1, &E2)
@@
expression E1, E2;
@@
- get_sha1_blob(E1, E2->hash)
+ get_oid_blob(E1, E2)
@@
expression E1, E2, E3, E4;
@@
- get_sha1_with_context(E1, E2, E3.hash, E4)
+ get_oid_with_context(E1, E2, &E3, E4)
@@
expression E1, E2, E3, E4;
@@
- get_sha1_with_context(E1, E2, E3->hash, E4)
+ get_oid_with_context(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many commands learned to pay attention to submodule.recurse
configuration.
* sb/submodule-blanket-recursive:
builtin/fetch.c: respect 'submodule.recurse' option
builtin/push.c: respect 'submodule.recurse' option
builtin/grep.c: respect 'submodule.recurse' option
Introduce 'submodule.recurse' option for worktree manipulators
submodule loading: separate code path for .gitmodules and config overlay
reset/checkout/read-tree: unify config callback for submodule recursion
submodule test invocation: only pass additional arguments
submodule recursing: do not write a config variable twice
|
|
Any command that understands '--recurse-submodules' can have its
default changed to true, by setting the new 'submodule.recurse'
option.
This patch includes read-tree/checkout/reset for working tree
manipulating commands. Later patches will cover other commands.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The callback function is essentially duplicated 3 times. Remove all
of them and offer a new callback function, that lives in submodule.c
By putting the callback function there, we no longer need the function
'set_config_update_recurse_submodules', nor duplicate the global variable
in each builtin as well as submodule.c
In the three builtins we have different 2 ways how to load the .gitmodules
and config file, which are slightly different. git-checkout has to load
the submodule config all the time due to 23b4c7bcc5 (checkout: Use
submodule.*.ignore settings from .git/config and .gitmodules, 2010-08-28)
git-reset and git-read-tree do not respect these diff settings, so loading
the submodule configuration is optional. Also put that into submodule.c
for code deduplication.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The command line option for '--recurse-submodules' is implemented
using an OPTION_CALLBACK, which takes both the callback (that sets
the file static global variable) as well as passes the same file
static global variable to the option parsing machinery to assign it.
This is fixed in this commit by passing NULL as the variable. The
callback sets it instead
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Simplify parse_pathspec() codepath and stop it from looking at the
default in-core index.
* bw/pathspec-sans-the-index:
pathspec: convert find_pathspecs_matching_against_index to take an index
pathspec: remove PATHSPEC_STRIP_SUBMODULE_SLASH_CHEAP
ls-files: prevent prune_cache from overeagerly pruning submodules
pathspec: remove PATHSPEC_STRIP_SUBMODULE_SLASH_EXPENSIVE flag
submodule: add die_in_unpopulated_submodule function
pathspec: provide a more descriptive die message
|
|
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
|
|
Since (ae8d08242 pathspec: pass directory indicator to
match_pathspec_item()) the path matching logic has been able to cope
with submodules without needing to strip off a trailing slash if a path
refers to a submodule.
Since stripping the slash is no longer necessary, remove the
PATHSPEC_STRIP_SUBMODULE_SLASH_CHEAP flag.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert parse_tree_indirect to take a pointer to struct object_id.
Update all the callers. This transformation was achieved using the
following semantic patch and manual updates to the declaration and
definition. Update builtin/checkout.c manually as well, since it uses a
ternary expression not handled by the semantic patch.
@@
expression E1;
@@
- parse_tree_indirect(E1.hash)
+ parse_tree_indirect(&E1)
@@
expression E1;
@@
- parse_tree_indirect(E1->hash)
+ parse_tree_indirect(E1)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is needed to convert parse_tree_indirect.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert lookup_commit, lookup_commit_or_die,
lookup_commit_reference, and lookup_commit_reference_gently to take
struct object_id arguments.
Introduce a temporary in parse_object buffer in order to convert this
function. This is required since in order to convert parse_object and
parse_object_buffer, lookup_commit_reference_gently and
lookup_commit_or_die would need to be converted. Not introducing a
temporary would therefore require that lookup_commit_or_die take a
struct object_id *, but lookup_commit would take unsigned char *,
leaving a confusing and hard-to-use interface.
parse_object_buffer will lose this temporary in a later patch.
This commit was created with manual changes to commit.c, commit.h, and
object.c, plus the following semantic patch:
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1.hash, E2)
+ lookup_commit_reference_gently(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_reference_gently(E1->hash, E2)
+ lookup_commit_reference_gently(E1, E2)
@@
expression E1;
@@
- lookup_commit_reference(E1.hash)
+ lookup_commit_reference(&E1)
@@
expression E1;
@@
- lookup_commit_reference(E1->hash)
+ lookup_commit_reference(E1)
@@
expression E1;
@@
- lookup_commit(E1.hash)
+ lookup_commit(&E1)
@@
expression E1;
@@
- lookup_commit(E1->hash)
+ lookup_commit(E1)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1.hash, E2)
+ lookup_commit_or_die(&E1, E2)
@@
expression E1, E2;
@@
- lookup_commit_or_die(E1->hash, E2)
+ lookup_commit_or_die(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-reset is yet another working tree manipulator, which should
be taught about submodules.
When a user uses git-reset and requests to recurse into submodules,
this will reset the submodules to the object name as recorded in the
superproject, detaching the HEADs.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the current branch is renamed with 'git branch -m/-M' or deleted
with 'git update-ref -m<msg> -d', the event is recorded in HEAD's log
with an empty message. In preparation for adding a more meaningful
message to HEAD's log in these cases, update delete_ref() to take a
message argument and pass it along to ref_transaction_delete().
Modify all callers to pass NULL for the new message argument; no
change in behavior is intended.
Note that this is relevant for HEAD's log but not for the deleted
ref's log, which is currently deleted along with the ref. Even if it
were not, an entry for the deletion wouldn't be present in the deleted
ref's log. files_transaction_commit() writes to the log if
REF_NEEDS_COMMIT or REF_LOG_ONLY are set, but lock_ref_for_update()
doesn't set REF_NEEDS_COMMIT for the deleted ref because REF_DELETING
is set. In contrast, the update for HEAD has REF_LOG_ONLY set by
split_head_update(), resulting in the deletion being logged.
Signed-off-by: Kyle Meyer <kyle@kyleam.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Callers of the hold_locked_index() function pass 0 when they want to
prepare to write a new version of the index file without wishing to
die or emit an error message when the request fails (e.g. somebody
else already held the lock), and pass 1 when they want the call to
die upon failure.
This option is called LOCK_DIE_ON_ERROR by the underlying lockfile
API, and the hold_locked_index() function translates the paramter to
LOCK_DIE_ON_ERROR when calling the hold_lock_file_for_update().
Replace these hardcoded '1' with LOCK_DIE_ON_ERROR and stop
translating. Callers other than the ones that are replaced with
this change pass '0' to the function; no behaviour change is
intended with this patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
Among the callers of hold_locked_index() that passes 0:
- diff.c::refresh_index_quietly() at the end of "git diff" is an
opportunistic update; it leaks the lockfile structure but it is
just before the program exits and nobody should care.
- builtin/describe.c::cmd_describe(),
builtin/commit.c::cmd_status(),
sequencer.c::read_and_refresh_cache() are all opportunistic
updates and they are OK.
- builtin/update-index.c::cmd_update_index() takes a lock upfront
but we may end up not needing to update the index (i.e. the
entries may be fully up-to-date), in which case we do not need to
issue an error upon failure to acquire the lock. We do diagnose
and die if we indeed need to update, so it is OK.
- wt-status.c::require_clean_work_tree() IS BUGGY. It asks
silence, does not check the returned value. Compare with
callsites like cmd_describe() and cmd_status() to notice that it
is wrong to call update_index_if_able() unconditionally.
|
|
* js/reset-usage:
reset: fix usage
|
|
The <tree-ish> parameter is actually optional (see man page).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conversion from unsigned char sha1[20] to struct object_id
continues.
* bc/cocci:
diff: convert prep_temp_blob() to struct object_id
merge-recursive: convert merge_recursive_generic() to object_id
merge-recursive: convert leaf functions to use struct object_id
merge-recursive: convert struct merge_file_info to object_id
merge-recursive: convert struct stage_data to use object_id
diff: rename struct diff_filespec's sha1_valid member
diff: convert struct diff_filespec to struct object_id
coccinelle: apply object_id Coccinelle transformations
coccinelle: convert hashcpy() with null_sha1 to hashclr()
contrib/coccinelle: add basic Coccinelle transforms
hex: add oid_to_hex_r()
|
|
A helper function that takes the contents of a commit object and
finds its subject line did not ignore leading blank lines, as is
commonly done by other codepaths. Make it ignore leading blank
lines to match.
* js/find-commit-subject-ignore-leading-blanks:
reset --hard: skip blank lines when reporting the commit subject
sequencer: use skip_blank_lines() to find the commit subject
commit -C: skip blank lines at the beginning of the message
commit.c: make find_commit_subject() more robust
pretty: make the skip_blank_lines() function public
|
|
When there are blank lines at the beginning of a commit message, the
pretty printing machinery already skips them when showing a commit
subject (or the complete commit message). We shall henceforth do the
same when reporting the commit subject after the user called
git reset --hard <commit>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert struct diff_filespec's sha1 member to use a struct object_id
called "oid" instead. The following Coccinelle semantic patch was used
to implement this, followed by the transformations in object_id.cocci:
@@
struct diff_filespec o;
@@
- o.sha1
+ o.oid.hash
@@
struct diff_filespec *p;
@@
- p->sha1
+ p->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function takes a pointer to a pathspec structure, and releases
the resources held by it, but does not free() the structure itself.
Such a function should be called "clear", not "free".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
One of the most common uses of git_path() is to pass a
constant, like git_path("MERGE_MSG"). This has two
drawbacks:
1. The return value is a static buffer, and the lifetime
is dependent on other calls to git_path, etc.
2. There's no compile-time checking of the pathname. This
is OK for a one-off (after all, we have to spell it
correctly at least once), but many of these constant
strings appear throughout the code.
This patch introduces a series of functions to "memoize"
these strings, which are essentially globals for the
lifetime of the program. We compute the value once, take
ownership of the buffer, and return the cached value for
subsequent calls. cache.h provides a helper macro for
defining these functions as one-liners, and defines a few
common ones for global use.
Using a macro is a little bit gross, but it does nicely
document the purpose of the functions. If we need to touch
them all later (e.g., because we learned how to change the
git_dir variable at runtime, and need to invalidate all of
the stored values), it will be much easier to have the
complete list.
Note that the shared-global functions have separate, manual
declarations. We could do something clever with the macros
(e.g., expand it to a declaration in some places, and a
declaration _and_ a definition in path.c). But there aren't
that many, and it's probably better to stay away from
too-magical macros.
Likewise, if we abandon the C preprocessor in favor of
generating these with a script, we could get much fancier.
E.g., normalizing "FOO/BAR-BAZ" into "git_path_foo_bar_baz".
But the small amount of saved typing is probably not worth
the resulting confusion to readers who want to grep for the
function's definition.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move the interface declaration for the functions in lockfile.c from
cache.h to a new file, lockfile.h. Add #includes where necessary (and
remove some redundant includes of cache.h by files that already
include builtin.h).
Move the documentation of the lock_file state diagram from lockfile.c
to the new header file.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An experiment to use two files (the base file and incremental
changes relative to it) to represent the index to reduce I/O cost
of rewriting a large index when only small part of the working tree
changes.
* nd/split-index: (32 commits)
t1700: new tests for split-index mode
t2104: make sure split index mode is off for the version test
read-cache: force split index mode with GIT_TEST_SPLIT_INDEX
read-tree: note about dropping split-index mode or index version
read-tree: force split-index mode off on --index-output
rev-parse: add --shared-index-path to get shared index path
update-index --split-index: do not split if $GIT_DIR is read only
update-index: new options to enable/disable split index mode
split-index: strip pathname of on-disk replaced entries
split-index: do not invalidate cache-tree at read time
split-index: the reading part
split-index: the writing part
read-cache: mark updated entries for split index
read-cache: save deleted entries in split index
read-cache: mark new entries for split index
read-cache: split-index mode
read-cache: save index SHA-1 after reading
entry.c: update cache_changed if refresh_cache is set in checkout_entry()
cache-tree: mark istate->cache_changed on prime_cache_tree()
cache-tree: mark istate->cache_changed on cache tree update
...
|
|
Move "commit->buffer" out of the in-core commit object and keep
track of their lengths. Use this to optimize the code paths to
validate GPG signatures in commit objects.
* jk/commit-buffer-length:
reuse cached commit buffer when parsing signatures
commit: record buffer length in cache
commit: convert commit->buffer to a slab
commit-slab: provide a static initializer
use get_commit_buffer everywhere
convert logmsg_reencode to get_commit_buffer
use get_commit_buffer to avoid duplicate code
use get_cached_commit_buffer where appropriate
provide helpers to access the commit buffer
provide a helper to set the commit buffer
provide a helper to free commit buffer
sequencer: use logmsg_reencode in get_message
logmsg_reencode: return const buffer
do not create "struct commit" with xcalloc
commit: push commit_index update into alloc_commit_node
alloc: include any-object allocations in alloc_report
replace dangerous uses of strbuf_attach
commit_tree: take a pointer/len pair rather than a const strbuf
|
|
Like the callsites in the previous commit, logmsg_reencode
already falls back to read_sha1_file when necessary.
However, I split its conversion out into its own commit
because it's a bit more complex.
We return either:
1. The original commit->buffer
2. A newly allocated buffer from read_sha1_file
3. A reencoded buffer (based on either 1 or 2 above).
while trying to do as few extra reads/allocations as
possible. Callers currently free the result with
logmsg_free, but we can simplify this by pointing them
straight to unuse_commit_buffer. This is a slight layering
violation, in that we may be passing a buffer from (3).
However, since the end result is to free() anything except
(1), which is unlikely to change, and because this makes the
interface much simpler, it's a reasonable bending of the
rules.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The return value from logmsg_reencode may be either a newly
allocated buffer or a pointer to the existing commit->buffer.
We would not want the caller to accidentally free() or
modify the latter, so let's mark it as const. We can cast
away the constness in logmsg_free, but only once we have
determined that it is a free-able buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Given that these constants are only being used when updating
references, it is inappropriate to give them such generic names as
"DIE_ON_ERR". So prefix their names with "UPDATE_REFS_".
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git reset" needs to refresh the index when working in a working
tree (it can also be used to match the index to the HEAD in an
otherwise bare repository), but it failed to set up the working
tree properly, causing GIT_WORK_TREE to be ignored.
* nd/reset-setup-worktree:
reset: optionally setup worktree and refresh index on --mixed
|
|
Refreshing index requires work tree. So we have two options: always
set up work tree (and refuse to reset if failing to do so), or make
refreshing index optional.
As refreshing index is not the main task, it makes more sense to make
it optional. This allows us to still work in a bare repository to update
what is in the index.
Reported-by: Patrick Palka <patrick@parcs.ath.cx>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When --mixed is used, entries could be removed from index if the
target ref does not have them. When "reset" is used in preparation for
commit spliting (in a dirty worktree), it could be hard to track what
files to be added back. The new option --intent-to-add simplifies it
by marking all removed files intent-to-add.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
|
|
The add--interactive --patch mode adjusts the UI based on
whether we are pulling changes from HEAD or elsewhere (in
the former case it asks to unstage the reverse hunk, rather
than apply the forward hunk).
Commit 166ec2e taught reset to work on an unborn branch, but
in doing so, switched to always providing add--interactive
with the sha1 rather than the symbolic name. This meant we
always used the "apply" interface, even for "git reset -p
HEAD".
We can fix this by passing the symbolic name to
add--interactive. Since it understands unborn branches
these days, we do not even have to cover this special case
ourselves; we can simply pass HEAD.
The tests in t7105 now check that the right interface is
used in each circumstance (and notice the regression from
166ec2e we are fixing). The test in t7106 checks that we
get this right for the unborn case, too (not a regression,
since it didn't work at all before, but a nice improvement).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code refactoring.
* jk/trailing-slash-in-pathspec:
reset: handle submodule with trailing slash
rm: re-use parse_pathspec's trailing-slash removal
|
|
Give "update-refs" a "--stdin" option to read multiple update
requests and perform them in an all-or-none fashion.
* bk/refs-multi-update:
update-ref: add test cases covering --stdin signature
update-ref: support multiple simultaneous updates
refs: add update_refs for multiple simultaneous updates
refs: add function to repack without multiple refs
refs: factor delete_ref loose ref step into a helper
refs: factor update_ref steps into helpers
refs: report ref type from lock_any_ref_for_update
reset: rename update_refs to reset_refs
|
|
* fc/trivial:
pull: use $curr_branch_short more
add: trivial style cleanup
reset: trivial style cleanup
branch: trivial style fix
reset: trivial refactoring
|
|
When using tab-completion, a directory path will often end with a
trailing slash which currently confuses "git reset" when dealing with
submodules. Now that we have parse_pathspec we can easily handle this
by simply adding the PATHSPEC_STRIP_SUBMODULE_SLASH_CHEAP flag.
To do this, we need to move the read_cache() call before the
parse_pathspec() call. All of the existing paths through cmd_reset()
that do not die early already call read_cache() at some point, so there
is no performance impact to doing this in the common case.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
|
|
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After commit 3fde386 (reset [--mixed]: use diff-based reset whether or
not pathspec was given), some code can be moved to the 'reset_type ==
MIXED' check.
Let's move the code that is specific to MIXED.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function resets refs rather than doing arbitrary updates.
Rename it to allow a future general-purpose update_refs function
to be added.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This task emerged from b04ba2bb (parse-options: deprecate OPT_BOOLEAN,
2011-09-27). All occurrences of the respective variables have
been reviewed and none of them relied on the counting up mechanism,
but all of them were using the variable as a true boolean.
This patch does not change semantics of any command intentionally.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This passes the pathspec, more or less unmodified, to
git-add--interactive. The command itself does not process pathspec. It
simply passes the pathspec to other builtin commands. So if all those
commands support pathspec, we're good.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One can set an alias
$ git config [--global] alias.lg "log --graph --pretty=format:'%Cred%h%Creset
-%C(yellow)%d%Creset %s %Cgreen(%cd) %C(bold blue)<%an>%Creset'
--abbrev-commit --date=local"
to see the log as a pretty tree (like *gitk* but in a terminal).
However, log messages written in an encoding i18n.commitEncoding which differs
from terminal encoding are shown corrupted even when i18n.logOutputEncoding
and terminal encoding are the same (e.g. log messages committed on a Cygwin box
with Windows-1251 encoding seen on a Linux box with a UTF-8 encoding and vice versa).
To simplify an example we can say the following two commands are expected
to give the same output to a terminal:
$ git log --oneline --no-color
$ git log --pretty=format:'%h %s'
However, the former pays attention to i18n.logOutputEncoding
configuration, while the latter does not when it formats "%s".
The same corruption is true for
$ git diff --submodule=log
and
$ git rev-list --pretty=format:%s HEAD
and
$ git reset --hard
This patch makes pretty --format honor logOutputEncoding when it formats
log message.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When resetting with paths, we no longer require a commit argument, but
only a tree-ish. Update the documentation and synopsis accordingly.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Thanks to b65982b (Optimize "diff-index --cached" using cache-tree,
2009-05-20), resetting with paths is much faster than resetting
without paths. Some timings for the linux-2.6 repo to illustrate this
(best of five, warm cache):
reset reset .
real 0m0.219s 0m0.080s
user 0m0.140s 0m0.040s
sys 0m0.070s 0m0.030s
These two commands should do the same thing, so instead of having the
user type the trailing " ." to get the faster do_diff_cache()-based
implementation, always use it when doing a mixed reset, with or
without paths (so "git reset $rev" would also be faster).
Timing "git reset" shows that it indeed becomes as fast as
"git reset ." after this patch.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some users seem to think, knowingly or not, that being on an unborn
branch is like having a commit with an empty tree checked out, but
when run on an unborn branch, "git reset" currently fails with:
fatal: Failed to resolve 'HEAD' as a valid ref.
Instead of making users figure out that they should run
git rm --cached -r .
, let's teach "git reset" without a revision argument, when on an
unborn branch, to behave as if the user asked to reset to an empty
tree. Don't take the analogy with an empty commit too far, though, but
still disallow explictly referring to HEAD in "git reset HEAD".
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Resetting with paths does not update HEAD and there is nothing else
that a commit should be needed for. Relax the argument parsing so only
a tree is required.
The sha1 is only passed to read_from_tree(), which already only
requires a tree.
The "rev" variable we pass to run_add_interactive() will resolve to a
tree. This is fine since interactive_reset only needs the parameter to
be a treeish and doesn't use it for display purposes.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that there is only one caller left to the single-line method
update_index_refresh(), inline it.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By not returning from inside the "if (pathspec)" block, we can let the
pathspec-aware and pathspec-less code share a bit more, making it
easier to make future changes that should affect both cases. This also
highlights the similarity between read_from_tree() and reset_index().
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When doing a mixed reset without paths, the index is locked, read,
reset, and written back as part of the actual reset operation (in
reset_index()). Then, when showing the list of worktree modifications,
we lock the index again, refresh it, and write it.
Change this so we only write the index once, making "git reset" a
little faster. It does mean that the index lock will be held a little
longer, but the difference is small compared to the time spent
refreshing the index.
There is one minor functional difference: We used to say "Could not
write new index file." if the first write failed, and "Could not
refresh index" if the second write failed. Now, we will only use the
first message.
This speeds up "git reset" a little on the linux-2.6 repo (best of
five, warm cache):
Before After
real 0m0.239s 0m0.214s
user 0m0.160s 0m0.130s
sys 0m0.070s 0m0.080s
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation for the/a following patch, move the locking, writing
and committing of the index file out of update_index_refresh(). The
code duplication caused will soon be taken care of. What remains of
update_index_refresh() is just one line, but it is still called from
two places, so let's leave it for now.
In the process, we expose and fix the minor UI bug that makes us print
"Could not refresh index" when we fail to write the index file when
invoked with a pathspec. Copy the error message from the pathspec-less
codepath ("Could not write new index file.").
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The final part of cmd_reset() essentially looks like:
if (pathspec) {
...
read_from_tree(...);
} else {
...
reset_index(...);
update_index_refresh(...);
...
}
where read_from_tree() internally also calls
update_index_refresh(). Move the call to update_index_refresh() out of
read_from_tree for symmetry with the 'else' block, making
read_from_tree() and reset_index() closer in functionality.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The switch statement towards the end of reset.c is missing case arms
for KEEP and MERGE for no obvious reason, and soon the only non-empty
case arm will be the one for HARD. So let's proactively replace it by
if-else, which will let us move one if statement out without leaving
funny-looking left-overs.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If writing or committing the new index file fails, we print "Could not
write new index file." followed by "Could not reset index file to
revision $rev.". The first message seems to imply the second, so print
only the first message.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git reset --keep" calls reset_index_file() twice, first doing a
two-way merge to the target revision, updating the index and worktree,
and then resetting the index. After each call, we write the index
file.
In the unlikely event that the second call to reset_index_file()
fails, the index will have been merged to the target revision, but
HEAD will not be updated, leaving the user with a dirty index.
By moving the locking, writing and committing out of
reset_index_file() and into the caller, we can avoid writing the index
twice, thereby making the sure we don't end up in the half-way reset
state. As a bonus, we speed up "git reset --keep" a little on the
linux-2.6 repo (best of five, warm cache):
Before After
real 0m0.315s 0m0.296s
user 0m0.290s 0m0.280s
sys 0m0.020s 0m0.010s
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use a single condition to guard the call to die_if_unmerged_cache for
both --soft and --keep. This avoids the small distraction of the
precondition check from the logic following it.
Also change an instance of
if (e)
err = err || f();
to the almost as short, but clearer
if (e && !err)
err = f();
(which is equivalent since we only care whether exit code is 0)
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By extracting the code for updating the HEAD and ORIG_HEAD symbolic
references to a separate function, we declutter cmd_reset() a bit and
we make it clear that e.g. the four variables {,sha1_}{,old_}orig are
only used by this code.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Throughout most of parse_args(), the variable 'i' remains at 0. Many
references are still made to the variable even when it could only have
the value 0. This made at least me, who has relatively little
experience with C programming styles, think that parts of the function
was meant to be part of a loop. To avoid such confusion, remove the
variable and also the 'argc' parameter and check for NULL trailing
argv instead.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Declutter cmd_reset() a bit by moving out the argument parsing to its
own function.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running e.g. "git reset ." in a bare repo results in an index file
being created from the HEAD commit. The differences compared to the
index are then printed as usual, but since there is no worktree, it
will appear as if all files are deleted. For example, in a bare clone
of git.git:
Unstaged changes after reset:
D .gitattributes
D .gitignore
D .mailmap
...
This happens because the check for is_bare_repository() happens after
we branch off into read_from_tree() to reset with paths. Fix by moving
the branching point after the check.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use the path arguments in two places in reset.c: in
interactive_reset() and read_from_tree(). Both of these call
get_pathspec(), so we pass the (prefix, argv) pair to both
functions. Move the call to get_pathspec() out of these methods, for
two reasons: 1) One argument is simpler than two. 2) It lets us use
the (arguably clearer) "if (pathspec)" in place of "if (i < argc)".
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git reset $pathspec" currently exits with a non-zero exit code if the
worktree is dirty after resetting, which is inconsistent with reset
without pathspec, and it makes it harder to know whether the command
really failed. Change it to exit with code 0 regardless of whether the
worktree is dirty so that non-zero indicates an error.
This makes the 4 "disambiguation" test cases in t7102 clearer since
they all used to "fail", 3 of which "failed" due to changes in the
work tree. Now only the ambiguous one fails.
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 34110cd (Make 'unpack_trees()' have a separate source and
destination index, 2008-03-06), the index no longer gets clobbered by
do_diff_cache() and we can remove the code for discarding and
re-reading it.
There are two paths to update_index_refresh() from cmd_reset(), but on
both paths, either read_cache() or read_cache_unmerged() will have
been called, so the call to read_cache() in this method is redundant
(although practically free).
This speeds up "git reset -- ." a little on the linux-2.6 repo (best
of five, warm cache):
Before After
real 0m0.093s 0m0.080s
user 0m0.040s 0m0.020s
sys 0m0.050s 0m0.050s
Signed-off-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teaches the object name parser things like a "git describe" output
is always a commit object, "A" in "git log A" must be a committish,
and "A" and "B" in "git log A...B" both must be committish, etc., to
prolong the lifetime of abbreviated object names.
* jc/sha1-name-more: (27 commits)
t1512: match the "other" object names
t1512: ignore whitespaces in wc -l output
rev-parse --disambiguate=<prefix>
rev-parse: A and B in "rev-parse A..B" refer to committish
reset: the command takes committish
commit-tree: the command wants a tree and commits
apply: --build-fake-ancestor expects blobs
sha1_name.c: add support for disambiguating other types
revision.c: the "log" family, except for "show", takes committish
revision.c: allow handle_revision_arg() to take other flags
sha1_name.c: introduce get_sha1_committish()
sha1_name.c: teach lookup context to get_sha1_with_context()
sha1_name.c: many short names can only be committish
sha1_name.c: get_sha1_1() takes lookup flags
sha1_name.c: get_describe_name() by definition groks only commits
sha1_name.c: teach get_short_sha1() a commit-only option
sha1_name.c: allow get_short_sha1() to take other flags
get_sha1(): fix error status regression
sha1_name.c: restructure disambiguation of short names
sha1_name.c: correct misnamed "canonical" and "res"
...
|
|
This is not strictly correct, in that resetting selected index
entries from corresponding paths out of a given tree without moving
HEAD is a valid operation, and in such case a tree-ish would suffice.
But the existing code already requires a committish in the codepath,
so let's be consistent with it for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
verify_filename() can be called in two different contexts. Either we
just tried to interpret a string as an object name, and it fails, so
we try looking for a working tree file (i.e. we finished looking at
revs that come earlier on the command line, and the next argument
must be a pathname), or we _know_ that we are looking for a
pathname, and shouldn't even try interpreting the string as an
object name.
For example, with this change, we get:
$ git log COPYING HEAD:inexistant
fatal: HEAD:inexistant: no such path in the working tree.
Use '-- <path>...' to specify paths that do not exist locally.
$ git log HEAD:inexistant
fatal: Path 'inexistant' does not exist in 'HEAD'
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the case of --mixed and --hard, we throw away the old index and
rebuild everything from the tree argument (or HEAD). So we have an
opportunity here to fill in the cache-tree data, just as read-tree
did.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
