| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"log -c --find-object=X" did not work well to find a merge that
involves a change to an object X from only one parent.
* jk/diff-cc-oidfind-fix:
combine-diff: handle --find-object in multitree code path
|
|
When doing combined diffs, we have two possible code paths:
- a slower one which independently diffs against each parent, applies
any filters, and then intersects the resulting paths
- a faster one which walks all trees simultaneously
When the diff options specify that we must do certain filters, like
pickaxe, then we always use the slow path, since the pickaxe code only
knows how to handle filepairs, not the n-parent entries generated for
combined diffs.
But there are two problems with the slow path:
1. It's slow. Running:
git rev-list HEAD | git diff-tree --stdin -r -c
in git.git takes ~3s on my machine. But adding "--find-object" to
that increases it to ~6s, even though find-object itself should
incur only a few extra oid comparisons. On linux.git, it's even
worse: 35s versus 215s.
2. It doesn't catch all cases where a particular path is interesting.
Consider a merge with parent blobs X and Y for a particular path,
and end result Z. That should be interesting according to "-c",
because the result doesn't match either parent. And it should be
interesting even with "--find-object=X", because "X" went away in
the merge.
But because we perform each pairwise diff independently, this
confuses the intersection code. The change from X to Z is still
interesting according to --find-object. But in the other parent we
went from Y to Z, so the diff appears empty! That causes the
intersection code to think that parent didn't change the path, and
thus it's not interesting for "-c".
This patch fixes both by implementing --find-object for the multitree
code. It's a bit unfortunate that we have to duplicate some logic from
diffcore-pickaxe, but this is the best we can do for now. In an ideal
world, all of the diffcore code would stop thinking about filepairs and
start thinking about n-parent sets, and we could use the multitree walk
with all of it.
Until then, there are some leftover warts:
- other pickaxe operations, like -S or -G, still suffer from both
problems. These would be hard to adapt because they rely on having
a diff_filespec() for each path to look at content. And we'd need to
define what an n-way "change" means in each case (probably easy for
"-S", which can compare counts, but not so clear for -G, which is
about grepping diffs).
- other options besides --find-object may cause us to use the slow
pairwise path, in which case we'll go back to producing a different
(wrong) answer for the X/Y/Z case above.
We may be able to hack around these, but I think the ultimate solution
will be a larger rewrite of the diffcore code. For now, this patch
improves one specific case but leaves the rest.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Get rid of 'dense' argument that is redundant for every function that has
'struct rev_info *rev' argument as well, as the value of 'dense' passed is
always taken from 'rev->dense_combined_merges' field.
The only place where this was not the case is in 'submodule.c' where
'diff_tree_combined_merge()' was called with '1' for 'dense' argument. However,
at that call the 'revs' instance used is local to the function, and we now just
set 'revs->dense_combined_merges' to 1 in this local instance.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We renamed the actual data structure in 910650d2f8 (Rename sha1_array to
oid_array, 2017-03-31), but the file is still called sha1-array. Besides
being slightly confusing, it makes it more annoying to grep for leftover
occurrences of "sha1" in various files, because the header is included
in so many places.
Let's complete the transition by renaming the source and header files
(and fixing up a few comment references).
I kept the "-" in the name, as that seems to be our style; cf.
fc1395f4a4 (sha1_file.c: rename to use dash in file name, 2018-04-10).
We also have oidmap.h and oidset.h without any punctuation, but those
are "struct oidmap" and "struct oidset" in the code. We _could_ make
this "oidarray" to match, but somehow it looks uglier to me because of
the length of "array" (plus it would be a very invasive patch for little
gain).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Output from "diff --cc" did not show the original paths when the
merge involved renames. A new option adds the paths in the
original trees to the output.
* en/combined-all-paths:
log,diff-tree: add --combined-all-paths option
|
|
The combined diff format for merges will only list one filename, even if
rename or copy detection is active. For example, with raw format one
might see:
::100644 100644 100644 fabadb8 cc95eb0 4866510 MM describe.c
::100755 100755 100755 52b7a2d 6d1ac04 d2ac7d7 RM bar.sh
::100644 100644 100644 e07d6c5 9042e82 ee91881 RR phooey.c
This doesn't let us know what the original name of bar.sh was in the
first parent, and doesn't let us know what either of the original names
of phooey.c were in either of the parents. In contrast, for non-merge
commits, raw format does provide original filenames (and a rename score
to boot). In order to also provide original filenames for merge
commits, add a --combined-all-paths option (which must be used with
either -c or --cc, and is likely only useful with rename or copy
detection active) so that we can print tab-separated filenames when
renames are involved. This transforms the above output to:
::100644 100644 100644 fabadb8 cc95eb0 4866510 MM desc.c desc.c desc.c
::100755 100755 100755 52b7a2d 6d1ac04 d2ac7d7 RM foo.sh bar.sh bar.sh
::100644 100644 100644 e07d6c5 9042e82 ee91881 RR fooey.c fuey.c phooey.c
Further, in patch format, this changes the from/to headers so that
instead of just having one "from" header, we get one for each parent.
For example, instead of having
--- a/phooey.c
+++ b/phooey.c
we would see
--- a/fooey.c
--- a/fuey.c
+++ b/phooey.c
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff --color-moved --cc --stat -p" did not work well due to
funny interaction between a bug in color-moved and the rest, which
has been fixed.
* jk/diff-cc-stat-fixes:
combine-diff: treat --dirstat like --stat
combine-diff: treat --summary like --stat
combine-diff: treat --shortstat like --stat
combine-diff: factor out stat-format mask
diff: clear emitted_symbols flag after use
t4006: resurrect commented-out tests
|
|
Currently "--cc --dirstat" will show nothing for a merge. Like
--shortstat and --summary in the previous two patches, it probably makes
sense to treat it like we do --stat, and show a stat against the
first-parent.
This case is less obviously correct than for --shortstat and --summary,
as those are basically variants of --stat themselves. It's possible we
could develop a multi-parent combined dirstat format, in which case we
might regret defining this first-parent behavior. But the same could be
said for --stat, and in the 12+ years of it showing first-parent stats,
nobody has complained.
So showing the first-parent dirstat is at least _useful_, and if we
later develop a clever multi-parent stat format, we'd probably have to
deal with --stat anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently "--cc --summary" on a merge shows nothing. Since we show "--cc
--stat" as a stat against the first parent, and because --summary is
typically used in combination with --stat, it makes sense to treat them
both the same way.
Note that we have to tweak t4013's setup a bit to test this case, as the
existing merges do not have any --summary results against their first
parent. But since the merge at the tip of 'master' does add and remove
files with respect to the second parent, we can just make a reversed
doppelganger merge where the parents are swapped.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --stat of a combined diff is defined as the first-parent stat,
going all the way back to 965f803c32 (combine-diff: show diffstat with
the first parent., 2006-04-17).
Naturally, we gave --numstat the same treatment in 74e2abe5b7 (diff
--numstat, 2006-10-12).
But --shortstat, which is really just the final line of --stat, does
nothing, which produces confusing results:
$ git show --oneline --stat eab7584e37
eab7584e37 Merge branch 'en/show-ref-doc-fix'
Documentation/git-show-ref.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
$ git show --oneline --shortstat eab7584e37
eab7584e37 Merge branch 'en/show-ref-doc-fix'
[nothing! We'd expect to see the "1 file changed..." line]
This patch teaches combine-diff to treats the two formats identically.
Reported-by: David Turner <novalis@novalis.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are several conditionals in the combine diff code that check if
we're doing --stat or --numstat output. Since these must all remain in
sync, let's pull them out into a separate bit-mask.
Arguably this could go into diff.h along with the other DIFF_FORMAT
macros, but it's not clear that the definition of "which formats are
stat" is universal (e.g., does --dirstat count? --summary?). So let's
keep this local to combine-diff.c, where the meaning is more clearly
"stat formats that combine-diff supports".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
More codepaths become aware of working with in-core repository
instance other than the default "the_repository".
* nd/the-index: (22 commits)
rebase-interactive.c: remove the_repository references
rerere.c: remove the_repository references
pack-*.c: remove the_repository references
pack-check.c: remove the_repository references
notes-cache.c: remove the_repository references
line-log.c: remove the_repository reference
diff-lib.c: remove the_repository references
delta-islands.c: remove the_repository references
cache-tree.c: remove the_repository references
bundle.c: remove the_repository references
branch.c: remove the_repository reference
bisect.c: remove the_repository reference
blame.c: remove implicit dependency the_repository
sequencer.c: remove implicit dependency on the_repository
sequencer.c: remove implicit dependency on the_index
transport.c: remove implicit dependency on the_index
notes-merge.c: remove implicit dependency the_repository
notes-merge.c: remove implicit dependency on the_index
list-objects.c: reduce the_repository references
list-objects-filter.c: remove implicit dependency on the_index
...
|
|
The interface into "xdiff" library used to discover the offset and
size of a generated patch hunk by first formatting it into the
textual hunk header "@@ -n,m +k,l @@" and then parsing the numbers
out. A new interface has been introduced to allow callers a more
direct access to them.
* jk/xdiff-interface:
xdiff-interface: drop parse_hunk_header()
range-diff: use a hunk callback
diff: convert --check to use a hunk callback
combine-diff: use an xdiff hunk callback
diff: use hunk callback for word-diff
diff: discard hunk headers for patch-ids earlier
diff: avoid generating unused hunk header lines
xdiff-interface: provide a separate consume callback for hunks
xdiff: provide a separate emit callback for hunks
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A combined diff has to line up the hunks for all of the individual
pairwise diffs, and thus needs to know their line numbers and sizes. We
get that now by parsing the hunk header line that xdiff generates.
However, now that xdiff supports a hunk callback, we can just use the
values directly.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous commit taught xdiff to optionally provide the hunk header
data to a specialized callback. But most users of xdiff actually use our
more convenient xdi_diff_outf() helper, which ensures that our callbacks
are always fed whole lines.
Let's plumb the special hunk-callback through this interface, too. It
will follow the same rule as xdiff when the hunk callback is NULL (i.e.,
continue to pass a stringified hunk header to the line callback). Since
we add NULL to each caller, there should be no behavior change yet.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Various codepaths in the core-ish part learn to work on an
arbitrary in-core index structure, not necessarily the default
instance "the_index".
* nd/the-index: (23 commits)
revision.c: reduce implicit dependency the_repository
revision.c: remove implicit dependency on the_index
ws.c: remove implicit dependency on the_index
tree-diff.c: remove implicit dependency on the_index
submodule.c: remove implicit dependency on the_index
line-range.c: remove implicit dependency on the_index
userdiff.c: remove implicit dependency on the_index
rerere.c: remove implicit dependency on the_index
sha1-file.c: remove implicit dependency on the_index
patch-ids.c: remove implicit dependency on the_index
merge.c: remove implicit dependency on the_index
merge-blobs.c: remove implicit dependency on the_index
ll-merge.c: remove implicit dependency on the_index
diff-lib.c: remove implicit dependency on the_index
read-cache.c: remove implicit dependency on the_index
diff.c: remove implicit dependency on the_index
grep.c: remove implicit dependency on the_index
diff.c: remove the_index dependency in textconv() functions
blame.c: rename "repo" argument to "r"
combine-diff.c: remove implicit dependency on the_index
...
|
|
[jc: squashed in missing forward decl in userdiff.h found by Ramsay]
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the more restrictive oideq() should, in the long run,
give the compiler more opportunities to optimize these
callsites. For now, this conversion should be a complete
noop with respect to the generated code.
The result is also perhaps a little more readable, as it
avoids the "zero is equal" idiom. Since it's so prevalent in
C, I think seasoned programmers tend not to even notice it
anymore, but it can sometimes make for awkward double
negations (e.g., we can drop a few !!oidcmp() instances
here).
This patch was generated almost entirely by the included
coccinelle patch. This mechanical conversion should be
completely safe, because we check explicitly for cases where
oidcmp() is compared to 0, which is what oideq() is doing
under the hood. Note that we don't have to catch "!oidcmp()"
separately; coccinelle's standard isomorphisms make sure the
two are treated equivalently.
I say "almost" because I did hand-edit the coccinelle output
to fix up a few style violations (it mostly keeps the
original formatting, but sometimes unwraps long lines).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert read_sha1_file to take a pointer to struct object_id and rename
it read_object_file. Do the same for read_sha1_file_extended.
Convert one use in grep.c to use the new function without any other code
change, since the pointer being passed is a void pointer that is already
initialized with a pointer to struct object_id. Update the declaration
and definitions of the modified functions, and apply the following
semantic patch to convert the remaining callers:
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1.hash, E2, E3)
+ read_object_file(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1->hash, E2, E3)
+ read_object_file(E1, E2, E3)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1.hash, E2, E3, E4)
+ read_object_file_extended(&E1, E2, E3, E4)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1->hash, E2, E3, E4)
+ read_object_file_extended(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert find_unique_abbrev and find_unique_abbrev_r to each take a
pointer to struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid using identifiers that clash with C++ keywords. Even though
it is not a goal to compile Git with C++ compilers, changes like
this help use of code analysis tools that targets C++ on our
codebase.
* bw/c-plus-plus: (37 commits)
replace: rename 'new' variables
trailer: rename 'template' variables
tempfile: rename 'template' variables
wrapper: rename 'template' variables
environment: rename 'namespace' variables
diff: rename 'template' variables
environment: rename 'template' variables
init-db: rename 'template' variables
unpack-trees: rename 'new' variables
trailer: rename 'new' variables
submodule: rename 'new' variables
split-index: rename 'new' variables
remote: rename 'new' variables
ref-filter: rename 'new' variables
read-cache: rename 'new' variables
line-log: rename 'new' variables
imap-send: rename 'new' variables
http: rename 'new' variables
entry: rename 'new' variables
diffcore-delta: rename 'new' variables
...
|
|
Rename C++ keyword in order to bring the codebase closer to being able
to be compiled with a C++ compiler.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* tb/crlf-conv-flags:
convert_to_git(): safe_crlf/checksafe becomes int conv_flags
|
|
When calling convert_to_git(), the checksafe parameter defined what
should happen if the EOL conversion (CRLF --> LF --> CRLF) does not
roundtrip cleanly. In addition, it also defined if line endings should
be renormalized (CRLF --> LF) or kept as they are.
checksafe was an safe_crlf enum with these values:
SAFE_CRLF_FALSE: do nothing in case of EOL roundtrip errors
SAFE_CRLF_FAIL: die in case of EOL roundtrip errors
SAFE_CRLF_WARN: print a warning in case of EOL roundtrip errors
SAFE_CRLF_RENORMALIZE: change CRLF to LF
SAFE_CRLF_KEEP_CRLF: keep all line endings as they are
In some cases the integer value 0 was passed as checksafe parameter
instead of the correct enum value SAFE_CRLF_FALSE. That was no problem
because SAFE_CRLF_FALSE is defined as 0.
FALSE/FAIL/WARN are different from RENORMALIZE and KEEP_CRLF. Therefore,
an enum is not ideal. Let's use a integer bit pattern instead and rename
the parameter to conv_flags to make it more generically usable. This
allows us to extend the bit pattern in a subsequent commit.
Reported-By: Randall S. Becker <rsbecker@nexbridge.com>
Helped-By: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently the check whether to perform pickaxing is done via checking
`diffopt->pickaxe`, which contains the command line argument that we
want to pickaxe for. Soon we'll introduce a new type of pickaxing, that
will not store anything in the `.pickaxe` field, so let's migrate the
check to be dependent on pickaxe_opts.
It is not enough to just replace the check for pickaxe by pickaxe_opts,
because flags might be set, but pickaxing was not requested ('-i').
To cope with that, introduce a mask to check only for the bits indicating
the modes of operation.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A single-word "unsigned flags" in the diff options is being split
into a structure with many bitfields.
* bw/diff-opt-impl-to-bitfields:
diff: make struct diff_flags members lowercase
diff: remove DIFF_OPT_CLR macro
diff: remove DIFF_OPT_SET macro
diff: remove DIFF_OPT_TST macro
diff: remove touched flags
diff: add flag to indicate textconv was set via cmdline
diff: convert flags to be stored in bitfields
add, reset: use DIFF_OPT_SET macro to set a diff flag
|
|
Now that the flags stored in struct diff_flags are being accessed
directly and not through macros, change all struct members from being
uppercase to lowercase.
This conversion is done using the following semantic patch:
@@
expression E;
@@
- E.RECURSIVE
+ E.recursive
@@
expression E;
@@
- E.TREE_IN_RECURSIVE
+ E.tree_in_recursive
@@
expression E;
@@
- E.BINARY
+ E.binary
@@
expression E;
@@
- E.TEXT
+ E.text
@@
expression E;
@@
- E.FULL_INDEX
+ E.full_index
@@
expression E;
@@
- E.SILENT_ON_REMOVE
+ E.silent_on_remove
@@
expression E;
@@
- E.FIND_COPIES_HARDER
+ E.find_copies_harder
@@
expression E;
@@
- E.FOLLOW_RENAMES
+ E.follow_renames
@@
expression E;
@@
- E.RENAME_EMPTY
+ E.rename_empty
@@
expression E;
@@
- E.HAS_CHANGES
+ E.has_changes
@@
expression E;
@@
- E.QUICK
+ E.quick
@@
expression E;
@@
- E.NO_INDEX
+ E.no_index
@@
expression E;
@@
- E.ALLOW_EXTERNAL
+ E.allow_external
@@
expression E;
@@
- E.EXIT_WITH_STATUS
+ E.exit_with_status
@@
expression E;
@@
- E.REVERSE_DIFF
+ E.reverse_diff
@@
expression E;
@@
- E.CHECK_FAILED
+ E.check_failed
@@
expression E;
@@
- E.RELATIVE_NAME
+ E.relative_name
@@
expression E;
@@
- E.IGNORE_SUBMODULES
+ E.ignore_submodules
@@
expression E;
@@
- E.DIRSTAT_CUMULATIVE
+ E.dirstat_cumulative
@@
expression E;
@@
- E.DIRSTAT_BY_FILE
+ E.dirstat_by_file
@@
expression E;
@@
- E.ALLOW_TEXTCONV
+ E.allow_textconv
@@
expression E;
@@
- E.TEXTCONV_SET_VIA_CMDLINE
+ E.textconv_set_via_cmdline
@@
expression E;
@@
- E.DIFF_FROM_CONTENTS
+ E.diff_from_contents
@@
expression E;
@@
- E.DIRTY_SUBMODULES
+ E.dirty_submodules
@@
expression E;
@@
- E.IGNORE_UNTRACKED_IN_SUBMODULES
+ E.ignore_untracked_in_submodules
@@
expression E;
@@
- E.IGNORE_DIRTY_SUBMODULES
+ E.ignore_dirty_submodules
@@
expression E;
@@
- E.OVERRIDE_SUBMODULE_CONFIG
+ E.override_submodule_config
@@
expression E;
@@
- E.DIRSTAT_BY_LINE
+ E.dirstat_by_line
@@
expression E;
@@
- E.FUNCCONTEXT
+ E.funccontext
@@
expression E;
@@
- E.PICKAXE_IGNORE_CASE
+ E.pickaxe_ignore_case
@@
expression E;
@@
- E.DEFAULT_FOLLOW_RENAMES
+ E.default_follow_renames
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the `DIFF_OPT_CLR` macro and instead set the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_CLR(&E, fld)
+ E.flags.fld = 0
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_CLR(ptr, fld)
+ ptr->flags.fld = 0
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the `DIFF_OPT_SET` macro and instead set the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_SET(&E, fld)
+ E.flags.fld = 1
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_SET(ptr, fld)
+ ptr->flags.fld = 1
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the `DIFF_OPT_TST` macro and instead access the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_TST(&E, fld)
+ E.flags.fld
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_TST(ptr, fld)
+ ptr->flags.fld
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the declaration and definition of resolve_gitlink_ref to use
struct object_id and apply the following semantic patch:
@@
expression E1, E2, E3;
@@
- resolve_gitlink_ref(E1, E2, E3.hash)
+ resolve_gitlink_ref(E1, E2, &E3)
@@
expression E1, E2, E3;
@@
- resolve_gitlink_ref(E1, E2, E3->hash)
+ resolve_gitlink_ref(E1, E2, E3)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* bw/ls-files-sans-the-index:
ls-files: factor out tag calculation
ls-files: factor out debug info into a function
ls-files: convert show_files to take an index
ls-files: convert show_ce_entry to take an index
ls-files: convert prune_cache to take an index
ls-files: convert ce_excluded to take an index
ls-files: convert show_ru_info to take an index
ls-files: convert show_other_files to take an index
ls-files: convert show_killed_files to take an index
ls-files: convert write_eolinfo to take an index
ls-files: convert overlay_tree_on_cache to take an index
tree: convert read_tree to take an index parameter
convert: convert renormalize_buffer to take an index
convert: convert convert_to_git to take an index
convert: convert convert_to_git_filter_fd to take an index
convert: convert crlf_to_git to take an index
convert: convert get_cached_convert_stats_ascii to take an index
|
|
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert find_paths_generic and find_paths_multitree to use struct
object_id.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conversion from unsigned char [40] to struct object_id continues.
* bc/object-id:
Documentation: update and rename api-sha1-array.txt
Rename sha1_array to oid_array
Convert sha1_array_for_each_unique and for_each_abbrev to object_id
Convert sha1_array_lookup to take struct object_id
Convert remaining callers of sha1_array_lookup to object_id
Make sha1_array_append take a struct object_id *
sha1-array: convert internal storage for struct sha1_array to object_id
builtin/pull: convert to struct object_id
submodule: convert check_for_new_submodule_commits to object_id
sha1_name: convert disambiguate_hint_fn to take object_id
sha1_name: convert struct disambiguate_state to object_id
test-sha1-array: convert most code to struct object_id
parse-options-cb: convert sha1_array_append caller to struct object_id
fsck: convert init_skiplist to struct object_id
builtin/receive-pack: convert portions to struct object_id
builtin/pull: convert portions to struct object_id
builtin/diff: convert to struct object_id
Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZ
Convert GIT_SHA1_HEXSZ used for allocation to GIT_MAX_HEXSZ
Define new hash-size constants for allocating memory
|
|
Since this structure handles an array of object IDs, rename it to struct
oid_array. Also rename the accessor functions and the initialization
constant.
This commit was produced mechanically by providing non-Documentation
files to the following Perl one-liners:
perl -pi -E 's/struct sha1_array/struct oid_array/g'
perl -pi -E 's/\bsha1_array_/oid_array_/g'
perl -pi -E 's/SHA1_ARRAY_INIT/OID_ARRAY_INIT/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the callers to pass struct object_id by changing the function
declaration and definition and applying the following semantic patch:
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2.hash)
+ sha1_array_append(E1, &E2)
@@
expression E1, E2;
@@
- sha1_array_append(E1, E2->hash)
+ sha1_array_append(E1, E2)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's no need to use the magic "100" when a strbuf can do
it for us.
Signed-off-by: Jeff King <peff@peff.net>
|
|
Make the internal storage for struct sha1_array use an array of struct
object_id internally. Update the users of this struct which inspect its
internals.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since we're modifying this function anyway, it's a good time
to update it to the more modern "struct oid". We can also
drop some of the magic numbers in favor of GIT_SHA1_HEXSZ,
along with some descriptive comments.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The word "align" describes how the function actually differs
from find_unique_abbrev, and will make it less confusing
when we add more diff-specific abbrevation functions that do
not do this alignment.
Since this is a globally available function, let's also move
its descriptive comment to the header file, where we
typically document function interfaces.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conversion from unsigned char sha1[20] to struct object_id
continues.
* bc/cocci:
diff: convert prep_temp_blob() to struct object_id
merge-recursive: convert merge_recursive_generic() to object_id
merge-recursive: convert leaf functions to use struct object_id
merge-recursive: convert struct merge_file_info to object_id
merge-recursive: convert struct stage_data to use object_id
diff: rename struct diff_filespec's sha1_valid member
diff: convert struct diff_filespec to struct object_id
coccinelle: apply object_id Coccinelle transformations
coccinelle: convert hashcpy() with null_sha1 to hashclr()
contrib/coccinelle: add basic Coccinelle transforms
hex: add oid_to_hex_r()
|
|
Now that this struct's sha1 member is called "oid", update the comment
and the sha1_valid member to be called "oid_valid" instead. The
following Coccinelle semantic patch was used to implement this, followed
by the transformations in object_id.cocci:
@@
struct diff_filespec o;
@@
- o.sha1_valid
+ o.oid_valid
@@
struct diff_filespec *p;
@@
- p->sha1_valid
+ p->oid_valid
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert struct diff_filespec's sha1 member to use a struct object_id
called "oid" instead. The following Coccinelle semantic patch was used
to implement this, followed by the transformations in object_id.cocci:
@@
struct diff_filespec o;
@@
- o.sha1
+ o.oid.hash
@@
struct diff_filespec *p;
@@
- p->sha1
+ p->oid.hash
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function takes a pointer to a pathspec structure, and releases
the resources held by it, but does not free() the structure itself.
Such a function should be called "clear", not "free".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If our size computation overflows size_t, we may allocate a
much smaller buffer than we expected and overflow it. It's
probably impossible to trigger an overflow in most of these
sites in practice, but it is easy enough convert their
additions and multiplications into overflow-checking
variants. This may be fixing real bugs, and it makes
auditing the code easier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using FLEX_ARRAY macros reduces the amount of manual
computation size we have to do. It also ensures we don't
overflow size_t, and it makes sure we write the same number
of bytes that we allocated.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We frequently allocate strings as xmalloc(len + 1), where
the extra 1 is for the NUL terminator. This can be done more
simply with xmallocz, which also checks for integer
overflow.
There's no case where switching xmalloc(n+1) to xmallocz(n)
is wrong; the result is the same length, and malloc made no
guarantees about what was in the buffer anyway. But in some
cases, we can stop manually placing NUL at the end of the
allocated buffer. But that's only safe if it's clear that
the contents will always fill the buffer.
In each case where this patch does so, I manually examined
the control flow, and I tried to err on the side of caution.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Each of these cases can be converted to use ALLOC_ARRAY or
REALLOC_ARRAY, which has two advantages:
1. It automatically checks the array-size multiplication
for overflow.
2. It always uses sizeof(*array) for the element-size,
so that it can never go out of sync with the declared
type of the array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
|
|
|
|
When we call into xdiff to perform a diff, we generally lose
the return code completely. Typically by ignoring the return
of our xdi_diff wrapper, but sometimes we even propagate
that return value up and then ignore it later. This can
lead to us silently producing incorrect diffs (e.g., "git
log" might produce no output at all, not even a diff header,
for a content-level diff).
In practice this does not happen very often, because the
typical reason for xdiff to report failure is that it
malloc() failed (it uses straight malloc, and not our
xmalloc wrapper). But it could also happen when xdiff
triggers one our callbacks, which returns an error (e.g.,
outf() in builtin/rerere.c tries to report a write failure
in this way). And the next patch also plans to add more
failure modes.
Let's notice an error return from xdiff and react
appropriately. In most of the diff.c code, we can simply
die(), which matches the surrounding code (e.g., that is
what we do if we fail to load a file for diffing in the
first place). This is not that elegant, but we are probably
better off dying to let the user know there was a problem,
rather than simply generating bogus output.
We could also just die() directly in xdi_diff, but the
callers typically have a bit more context, and can provide a
better message (and if we do later decide to pass errors up,
we're one step closer to doing so).
There is one interesting case, which is in diff_grep(). Here
if we cannot generate the diff, there is nothing to match,
and we silently return "no hits". This is actually what the
existing code does already, but we make it a little more
explicit.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"color.diff.plain" was a misnomer; give it 'color.diff.context' as
a more logical synonym.
* jk/color-diff-plain-is-context:
diff.h: rename DIFF_PLAIN color slot to DIFF_CONTEXT
diff: accept color.diff.context as a synonym for "plain"
|
|
The latter is a much more descriptive name (and we support
"color.diff.context" now). This also updates the name of any
local variables which were used to store the color.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Also, convert a constant to GIT_SHA1_HEXSZ.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git log --pretty/format=" with an empty format string did not mean
the more obvious "No output whatsoever" but "Use default format",
which was counterintuitive.
* jk/pretty-empty-format:
pretty: make empty userformats truly empty
pretty: treat "--format=" as an empty userformat
revision: drop useless string offset when parsing "--pretty"
|
|
Fix (rarely used) "git diff-tree -t" regression in 2.0.
* jk/diff-tree-t-fix:
intersect_paths: respect mode in git's tree-sort
|
|
When we do a combined diff, we individually diff against
each parent, and then use intersect_paths to do a parallel
walk through the sorted results and come up with a final
list of interesting paths.
The sort order here is that returned by the diffs, which
means it is in git's tree-order which sorts sub-trees as if
their paths have "/" at the end. When we do our parallel
walk, we need to use a comparison function which provides
the same order.
Since 8518ff8 (combine-diff: optimize combine_diff_path sets
intersection, 2014-01-20), we use a simple strcmp to
compare the pathnames, and get this wrong. It's somewhat
hard to trigger because normally a diff does not produce
tree entries at all, and therefore the sort order is the
same as a strcmp. However, if the "-t" option is used with
the diff, then we will produce diff_filepairs for both trees
and files.
We can use base_name_compare to do the comparison, just as
the tree-diff code does. Even though what we have are not
technically base names (they are full paths within the
tree), the end result is the same (we do not care about
interior slashes at all, only about the final character).
However, since we do not have the length of each path
stored, we take a slight shortcut: if neither of the entries
is a sub-tree then the comparison is equivalent to a strcmp.
This lets us skip the extra strlen calls in the common case
without having to reimplement base_name_compare from
scratch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user provides an empty format with "--format=", we
end up putting in extra whitespace that the user cannot
prevent. This comes from two places:
1. If the format is missing a terminating newline, we add
one automatically. This makes sense for --format=%h, but
not for a truly empty format.
2. We add an extra newline between the pretty-printed
format and a diff or diffstat. If the format is empty,
there's no point in doing so if there's nothing to
separate.
With this patch, one can get a diff with no other cruft out
of "diff-tree --format= $commit".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mk/show-s-no-extra-blank-line-for-merges:
git-show: fix 'git show -s' to not add extra terminator after merge commit
|
|
When git show -s is called for merge commit it prints extra newline
after any merge commit. This differs from output for commits with one
parent. Fix it by more thorough checking that diff output is disabled.
The code in question exists since commit 3969cf7db1. The additional
newline is really needed for cases when patch is requested, test
t4013-diff-various.sh contains cases which can demonstrate behavior when
the condition is restricted further.
Tests:
Added merge commit to 'set up a bit of history' case in t7007-show.sh to
cover the fix.
Existing tests are updated to demonstrate the new behaviour. Earlier,
the tests that used "git show -s --pretty=format:%s", even though
"--pretty=format:%s" calls for item separator semantics and does not ask
for the terminating newline after the last item, expected the output to
end with such a newline. They were relying on the buggy behaviour. Use
of "--format=%s", which is equivalent to "--pretty=tformat:%s" that asks
for a terminating newline after each item, is a more realistic way to
use the command.
In the test 'merge log messages' the expected data is changed, because
it was explicitly listing the extra newline. Also the msg.nologff and
msg.nolognoff expected files are replaced by one msg.nolog, because they
were diffing because of the bug, and now there should be no difference.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As was recently shown in "combine-diff: optimize
combine_diff_path sets intersection", combine-diff runs very slowly. In
that commit we optimized paths sets intersection, but that accounted
only for ~ 25% of the slowness, and as my tracing showed, for linux.git
v3.10..v3.11, for merges a lot of time is spent computing
diff(commit,commit^2) just to only then intersect that huge diff to
almost small set of files from diff(commit,commit^1).
In previous commit, we described the problem in more details, and
reworked the diff tree-walker to be general one - i.e. to work in
multiple parent case too. Now is the time to take advantage of it for
finding paths for combine diff.
The implementation is straightforward - if we know, we can get generated
diff paths directly, and at present that means no diff filtering or
rename/copy detection was requested(*), we can call multiparent tree-walker
directly and get ready paths.
(*) because e.g. at present, all diffcore transformations work on
diff_filepair queues, but in the future, that limitation can be
lifted, if filters would operate directly on combine_diff_paths.
Timings for `git log --raw --no-abbrev --no-renames` without `-c` ("git log")
and with `-c` ("git log -c") and with `-c --merges` ("git log -c --merges")
before and after the patch are as follows:
linux.git v3.10..v3.11
log log -c log -c --merges
before 1.9s 16.4s 15.2s
after 1.9s 2.4s 1.1s
The result stayed the same.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move code for finding paths for which diff(commit,parent_i) is not-empty
for all parents to separate function - at present we have generic (and
slow) code for this job, which translates 1 n-parent problem to n
1-parent problems and then intersect results, and will be adding another
limited, but faster, paths scanning implementation in the next patch.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Judging from sample outputs and tests nothing changes in diff -c output,
and this change will help later patches, when we'll be refactoring paths
scanning into its own function with several variants - the
show_log_first logic / code will stay common to all of them.
NOTE: only now we have to take care to explicitly not show anything if
parents array is empty, as in fact there are some clients in Git code,
which calls diff_tree_combined() in such a way.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Linus once said:
I actually wish more people understood the really core low-level
kind of coding. Not big, complex stuff like the lockless name
lookup, but simply good use of pointers-to-pointers etc. For
example, I've seen too many people who delete a singly-linked
list entry by keeping track of the "prev" entry, and then to
delete the entry, doing something like
if (prev)
prev->next = entry->next;
else
list_head = entry->next;
and whenever I see code like that, I just go "This person
doesn't understand pointers". And it's sadly quite common.
People who understand pointers just use a "pointer to the entry
pointer", and initialize that with the address of the
list_head. And then as they traverse the list, they can remove
the entry without using any conditionals, by just doing a "*pp =
entry->next".
Applying that simplification lets us lose 7 lines from this function
even while adding 2 lines of comment.
I was tempted to squash this into the original commit, but because
the benchmarking described in the commit log is without this
simplification, I decided to keep it a separate follow-up patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The field was used in order to speed-up name comparison and also to
mark removed paths by setting it to 0.
Because the updated code does significantly less strcmp and also
just removes paths from the list and free right after we know a path
will not be needed, it is not needed anymore.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When generating combined diff, for each commit, we intersect diff
paths from diff(parent_0,commit) to diff(parent_i,commit) comparing
all paths pairs, i.e. doing it the quadratic way. That is correct,
but could be optimized.
Paths come from trees in sorted (= tree) order, and so does diff_tree()
emits resulting paths in that order too. Now if we look at diffcore
transformations, all of them, except diffcore_order, preserve resulting
path ordering:
- skip_stat_unmatch, grep, pickaxe, filter
-- just skip elements -> order stays preserved
- break -- just breaks diff for a path, adding path
dup after the path -> order stays preserved
- detect rename/copy -- resulting paths are emitted sorted
(verified empirically)
So only diffcore_order changes diff paths ordering.
But diffcore_order meaning affects only presentation - i.e. only how to
show the diff, so we could do all the internal computations without
paths reordering, and order only resultant paths set. This is faster,
since, if we know two paths sets are all ordered, their intersection
could be done in linear time.
This patch does just that.
Timings for `git log --raw --no-abbrev --no-renames` without `-c` ("git log")
and with `-c` ("git log -c") before and after the patch are as follows:
linux.git v3.10..v3.11
log log -c
before 1.9s 20.4s
after 1.9s 16.6s
navy.git (private repo)
log log -c
before 0.83s 15.6s
after 0.83s 2.1s
P.S.
I think linux.git case is sped up not so much as the second one, since
in navy.git, there are more exotic (subtree, etc) merges.
P.P.S.
My tracing showed that the rest of the time (16.6s vs 1.9s) is usually
spent in computing huge diffs from commit to second parent. Will try to
deal with it, if I'll have time.
P.P.P.S.
For combine_diff_path, ->len is not needed anymore - will remove it in
the next noisy cleanup path, to maintain good signal/noise ratio here.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git mv A B" when moving a submodule A does "the right thing",
inclusing relocating its working tree and adjusting the paths in
the .gitmodules file.
* jl/submodule-mv: (53 commits)
rm: delete .gitmodules entry of submodules removed from the work tree
mv: update the path entry in .gitmodules for moved submodules
submodule.c: add .gitmodules staging helper functions
mv: move submodules using a gitfile
mv: move submodules together with their work trees
rm: do not set a variable twice without intermediate reading.
t6131 - skip tests if on case-insensitive file system
parse_pathspec: accept :(icase)path syntax
pathspec: support :(glob) syntax
pathspec: make --literal-pathspecs disable pathspec magic
pathspec: support :(literal) syntax for noglob pathspec
kill limit_pathspec_to_literal() as it's only used by parse_pathspec()
parse_pathspec: preserve prefix length via PATHSPEC_PREFIX_ORIGIN
parse_pathspec: make sure the prefix part is wildcard-free
rename field "raw" to "_raw" in struct pathspec
tree-diff: remove the use of pathspec's raw[] in follow-rename codepath
remove match_pathspec() in favor of match_pathspec_depth()
remove init_pathspec() in favor of parse_pathspec()
remove diff_tree_{setup,release}_paths
convert common_prefix() to use struct pathspec
...
|
|
Output from "git log --full-diff -- <pathspec>" looked strange,
because comparison was done with the previous ancestor that touched
the specified <pathspec>, causing the patches for paths outside the
pathspec to show more than the single commit has changed.
Tweak "git reflog -p" for the same reason using the same mechanism.
* tr/log-full-diff-keep-true-parents:
log: use true parents for diff when walking reflogs
log: use true parents for diff even when rewriting
|
|
When using pathspec filtering in combination with diff-based log
output, parent simplification happens before the diff is computed.
The diff is therefore against the *simplified* parents.
This works okay, arguably by accident, in the normal case:
simplification reduces to one parent as long as the commit is TREESAME
to it. So the simplified parent of any given commit must have the
same tree contents on the filtered paths as its true (unfiltered)
parent.
However, --full-diff breaks this guarantee, and indeed gives pretty
spectacular results when comparing the output of
git log --graph --stat ...
git log --graph --full-diff --stat ...
(--graph internally kicks in parent simplification, much like
--parents).
To fix it, store a copy of the parent list before simplification (in a
slab) whenever --full-diff is in effect. Then use the stored parents
instead of the simplified ones in the commit display code paths. The
latter do not actually check for --full-diff to avoid duplicated code;
they just grab the original parents if save_parents() has not been
called for this revision walk.
For ordinary commits it should be obvious that this is the right thing
to do.
Merge commits are a bit subtle. Observe that with default
simplification, merge simplification is an all-or-nothing decision:
either the merge is TREESAME to one parent and disappears, or it is
different from all parents and the parent list remains intact.
Redundant parents are not pruned, so the existing code also shows them
as a merge.
So if we do show a merge commit, the parent list just consists of the
rewrite result on each parent. Running, e.g., --cc on this in
--full-diff mode is not very useful: if any commits were skipped, some
hunks will disagree with all sides of the merge (with one side,
because commits were skipped; with the others, because they didn't
have those changes in the first place). This triggers --cc showing
these hunks spuriously.
Therefore I believe that even for merge commits it is better to show
the diffs wrt. the original parents.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ondřej Bílka <neleai@seznam.cz>
Reviewed-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/log-follow-with-combined:
fix segfault with git log -c --follow
|
|
"git diff -c -p" was not showing a deleted line from a hunk when
another hunk immediately begins where the earlier one ends.
* mk/combine-diff-context-horizon-fix:
combine-diff.c: Fix output when changes are exactly 3 lines apart
|
|
In diff_tree_combined we make a copy of diffopts. In
try_to_follow_renames, called via diff_tree_sha1, we free and
re-initialize diffopts->pathspec->items. Since we did not make a deep
copy of diffopts in diff_tree_combined, the original diffopts does not
get the update. By the time we return from diff_tree_combined,
rev->diffopt->pathspec->items points to an invalid memory address. We
get a segfault next time we try to access that pathspec.
Instead, along with the copy of diffopts, make a copy pathspec->items as
well.
We would also have to make a copy of pathspec->raw to keep it consistent
with pathspec->items, but nobody seems to rely on that.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a deletion is followed by exactly 3 (or whatever the number of
context lines) unchanged lines, followed by another change, the combined
diff output would hide the first deletion, resulting in a malformed
diff.
This happened because the 3 lines before each change are painted
interesting, but also marked as no_pre_delete to prevent showing deletes
that were previously marked as uninteresting. This behaviour was
introduced in c86fbe53 (diff -c/--cc: do not include uninteresting
deletion before leading context). However, as a side effect, this could
also mark deletes that were already interesting as no_pre_delete. This
would happen only if the delete was exactly 3 lines away from the next
change, since lines farther away would not be touched by the "paint
three lines before the change" code and lines closer would be painted
by the "merge two adjacent hunks" code instead, which does not set the
no_pre_delete flag.
This commit fixes this problem by only setting the no_pre_delete flag
for changes that were previously uninteresting.
Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This replaces the greedy implementation to coalesce lost lines by using
dynamic programming to find the Longest Common Subsequence.
The O(n²) time complexity is obviously bigger than previous
implementation but it can produce shorter diff results (and most likely
easier to read).
List of lost lines is now doubly-linked because we reverse-read it when
reading the direction matrix.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The combined diff --cc output does not honor options to ignore
whitespace changes (-b, -w, and --ignore-space-at-eol).
Correct this by passing diff flags to diff engine, so that combined
diff behaves as normal diff does with spaces, and by coalescing
lines that are removed from both (or more) parents, honoring the
same rule to ignore whitespace changes.
With this change, a conflict-less merge done using a ignore-*
strategy option will not show any conflict if shown in combined-diff
using the same option.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactors a lot of repetitive code sequence from the graph drawing
code and adds it to the combined diff output.
* jk/diff-graph-cleanup:
combine-diff.c: teach combined diffs about line prefix
diff.c: use diff_line_prefix() where applicable
diff: add diff_line_prefix function
diff.c: make constant string arguments const
diff: write prefix to the correct file
graph: output padding for merge subsequent parents
|
|
When running "git log --graph --cc -p" the diff output for merges is not
indented by the graph structure, unlike the diffs of non-merge commits
(added in commit 7be5761 - diff.c: Output the text graph padding before
each diff line).
Fix this by teaching the combined diff code to output diff_line_prefix()
before each line.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "raw" format of combine-diff output is supposed to have as many
colons as there are parents at the beginning, then blob modes for
these parents, and then object names for these parents.
We weren't however prepared to handle a more than 32-way merge and
did not show the correct number of colons in such a case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff" had a confusion between taking data from a path in the
working tree and taking data from an object that happens to have
name 0{40} recorded in a tree.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
|
|
We do not want a link to 0{40} object stored anywhere in our objects.
* jk/maint-null-in-trees:
fsck: detect null sha1 in tree entries
do not write null sha1s to on-disk index
diff: do not use null sha1 as a sentinel value
|
|
The diff code represents paths using the diff_filespec
struct. This struct has a sha1 to represent the sha1 of the
content at that path, as well as a sha1_valid member which
indicates whether its sha1 field is actually useful. If
sha1_valid is not true, then the filespec represents a
working tree file (e.g., for the no-index case, or for when
the index is not up-to-date).
The diff_filespec is only used internally, though. At the
interfaces to the diff subsystem, callers feed the sha1
directly, and we create a diff_filespec from it. It's at
that point that we look at the sha1 and decide whether it is
valid or not; callers may pass the null sha1 as a sentinel
value to indicate that it is not.
We should not typically see the null sha1 coming from any
other source (e.g., in the index itself, or from a tree).
However, a corrupt tree might have a null sha1, which would
cause "diff --patch" to accidentally diff the working tree
version of a file instead of treating it as a blob.
This patch extends the edges of the diff interface to accept
a "sha1_valid" flag whenever we accept a sha1, and to use
that flag when creating a filespec. In some cases, this
means passing the flag through several layers, making the
code change larger than would be desirable.
One alternative would be to simply die() upon seeing
corrupted trees with null sha1s. However, this fix more
directly addresses the problem (while bogus sha1s in a tree
are probably a bad thing, it is really the sentinel
confusion sending us down the wrong code path that is what
makes it devastating). And it means that git is more capable
of examining and debugging these corrupted trees. For
example, you can still "diff --raw" such a tree to find out
when the bogus entry was introduced; you just cannot do a
"--patch" diff (just as you could not with any other
corrupted tree, as we do not have any content to diff).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fixes an age old corner case bug in combine diff (only triggered with -U0
and the hunk at the beginning of the file needs to be shown).
By René Scharfe
* rs/combine-diff-zero-context-at-the-beginning:
combine-diff: fix loop index underflow
|
|
If both la and context are zero at the start of the loop, la wraps around
and we end up reading from memory far away. Skip the loop in that case
instead.
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of passing the hash of a commit and then searching that
same commit in the single caller, simply pass the commit directly.
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Maintaining an array of hashes is easier using sha1_array than
open-coding it. This patch also fixes a leak of the SHA1 array
in diff_tree_combined_merge().
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/color-and-pager:
want_color: automatically fallback to color.ui
diff: don't load color config in plumbing
config: refactor get_colorbool function
color: delay auto-color decision until point of use
git_config_colorbool: refactor stdout_is_tty handling
diff: refactor COLOR_DIFF from a flag into an int
setup_pager: set GIT_PAGER_IN_USE
t7006: use test_config helpers
test-lib: add helper functions for config
t7006: modernize calls to unset
Conflicts:
builtin/commit.c
parse-options.c
|
|
* jc/combine-diff-callback:
combine-diff: support format_callback
|
|
This teaches combine-diff machinery to feed a combined merge to a callback
function when DIFF_FORMAT_CALLBACK is specified.
So far, format callback functions are not used for anything but 2-way
diffs. A callback is given a diff_queue_struct, which is an array of
diff_filepair. As its name suggests, a diff_filepair is a _pair_ of
diff_filespec that represents a single preimage and a single postimage.
Since "diff -c" is to compare N parents with a single merge result and
filter out any paths whose result match one (or more) of the parent(s),
its output has to be able to represent N preimages and 1 postimage. For
this reason, a callback function that inspects a diff_filepair that
results from this new infrastructure can and is expected to view the
preimage side (i.e. pair->one) as an array of diff_filespec. Each element
in the array, except for the last one, is marked with "has_more_entries"
bit, so that the same callback function can be used for 2-way diffs and
combined diffs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This lets us store more than just a bit flag for whether we
want color; we can also store whether we want automatic
colors. This can be useful for making the automatic-color
decision closer to the point of use.
This mostly just involves replacing DIFF_OPT_* calls with
manipulations of the flag. The biggest exception is that
calls to DIFF_OPT_TST must check for "o->use_color > 0",
which lets an "unknown" value (i.e., the default) stay at
"no color". In the previous code, a value of "-1" was not
propagated at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-combined-diff-work-tree:
diff -c/--cc: do not mistake "resolved as deletion" as "use working tree"
Conflicts:
combine-diff.c
|
|
The combined diff machinery can be used to compare:
- a merge commit with its parent commits;
- a working-tree file with multiple stages in an unmerged index; or
- a working-tree file with the HEAD and the index.
The internal function combine-diff.c:show_patch_diff() checked if it needs
to read the "result" from the working tree by looking at the object name
of the result --- if it is null_sha1, it read from the working tree.
This mistook a merge that records a deletion as the conflict resolution
as if it is a cue to read from the working tree. Pass this information
explicitly from the caller instead.
Noticed and reported by Johan Herland.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When doing a combined diff, we did not respect textconv attributes at
all. This generally lead to us printing "Binary files differ" when we
could show a combined diff of the converted text.
This patch converts file contents according to textconv attributes. The
implementation is slightly ugly; because the textconv code is tightly
linked with the diff_filespec code, we temporarily create a diff_filespec
during conversion. In practice, though, this should not create a
performance problem.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The combined diff code path is totally different from the
regular diff code path, and didn't handle binary files at
all. The results of a combined diff on a binary file could
range from annoying (since we spewed binary garbage,
possibly upsetting the user's terminal), to wrong (embedded
NULs caused us to show incorrect diffs, with lines truncated
at the NUL character), to potential security problems
(embedded NULs could interfere with "-z" output, possibly
defeating policy hooks which parse diff output).
Instead, we consider a combined diff to be binary if any of
the input blobs is binary. To show a binary combined diff,
we indicate "Binary blobs differ"; the "index" meta line
will show which parents had which blob.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One loop combined both the patch generation and checking
whether there was any mode change to report. Let's factor
that into two separate loops, as we may care about the mode
change even if we are not generating patches (e.g., because
we are showing a binary diff, which will come in a future
patch).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a pretty big logical chunk, so it makes the function
a bit more readable to have it split out. In addition, it
will make it easier to add an alternate code path for binary
diffs in a future patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/diff-no-minimal:
git diff too slow for a file
|
|
* rs/diff-no-minimal:
git diff too slow for a file
|
|
xdi_diff_outf() overrides the structure members of its last parameter,
ignoring any value that callers pass in. It's no surprise then that all
callers pass a pointer to an uninitialized structure. They also don't
read it after the call, so the parameter is neither used for input nor
for output. Turn it into a local variable of xdi_diff_outf().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since the xdiff library had been introduced to git, all its callers
have used the flag XDF_NEED_MINIMAL. It makes sure that the smallest
possible diff is produced, but that takes quite some time if there are
lots of differences that can be expressed in multiple ways.
This flag makes a difference for only 0.1% of the non-merge commits in
the git repo of Linux, both in terms of diff size and execution time.
The patches there are mostly nice and small.
SungHyun Nam however reported a case in a different repo where a diff
took more than 20 times longer to generate with XDF_NEED_MINIMAL than
without. Rebasing became really slow.
This patch removes this flag from all callers. The default of xdiff is
saner because it has minimal to no impact in the normal case of small
diffs and doesn't incur that much of a speed penalty for large ones.
A follow-up patch may introduce a command line option to set the flag if
the user needs it, similar to GNU diff's -d/--minimal.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Consider an evil merge of two commits A and B, both of which have a
file 'foo', but the merge result does not have that file.
The combined-diff code learned in 4462731 (combine-diff: do not punt
on removed or added files., 2006-02-06) to concisely show only the
removal, since that is the evil part and the previous contents are
presumably uninteresting.
However, to diagnose an empty merge result, it overloaded the variable
that holds the file's length. This means that the check also triggers
for truncated files. Consequently, such files were not shown in the
diff at all despite the merge being clearly evil.
Fix this by adding a new variable that distinguishes whether the file
was deleted (which is the case 4462731 handled) or truncated. In the
truncated case, we show the full combined diff again, which is rather
spammy but at least does not hide the evilness.
Reported-by: David Martínez Martí <desarrollo@gestiweb.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Inspired by the coloring of quilt.
Introduce a separate color and paint the hunk comment part, i.e. the name
of the function, in a separate color "diff.func" (defaults to plain).
Whitespace between hunk header and hunk comment is printed in plain color.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Trailing whitespace and no newline fix
diff --cc: a lost line at the beginning of the file is shown incorrectly
combine-diff.c: fix performance problem when folding common deleted lines
|
|
When combine-diff inspected the diff from one parent to the merge result,
it misinterpreted a header in the form @@ -l,k +0,0 @@.
This hunk header means that K lines were removed from the beginning of the
file, so the lost lines must be queued to the sline that represents the
first line of the merge result, but we incremented our pointer incorrectly
and ended up queuing it to the second line, which in turn made the lossage
appear _after_ the first line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For a deleted line in a patch with the parent we are looking at, the
append_lost() function finds the same line among a run of lines that were
deleted from the same location by patches from parents we previously
checked. This is so that patches with two parents
@@ -1,4 +1,3 @@ @@ -1,4 +1,3 @@
one one
-two -two
three three
-quatro -fyra
+four +four
can be coalesced into this sequence, reusing one line that describes the
removal of "two" for both parents.
@@@ -1,4 -1,4 +1,3 @@@
one
--two
three
- quatro
-frya
++four
While reading the second patch (that removes "two" and then "fyra"), after
finding where removal of the "two" matches, we need to find existing
removal of "fyra" (if exists) in the removal list, but the match has to
happen after all the existing matches (in this case "two"). The code used
a naïve O(n^2) algorithm to compute this by scanning the whole removal
list over and over again.
This patch remembers where the next scan should be started in the existing
removal list to avoid this.
Noticed by Linus Torvalds.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Lots of die() calls did not actually report the kind of error, which
can leave the user confused as to the real problem. Use die_errno()
where we check a system/library call that sets errno on failure, or
one of the following that wrap such calls:
Function Passes on error from
-------- --------------------
odb_pack_keep open
read_ancestry fopen
read_in_full xread
strbuf_read xread
strbuf_read_file open or strbuf_read_file
strbuf_readlink readlink
write_in_full xwrite
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Essentially; s/type* /type */ as per the coding guidelines.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
diff -c -p: do not die on submodules
Conflicts:
combine-diff.c
|
|
* maint-1.6.0:
diff -c -p: do not die on submodules
|
|
The combine diff logic knew only about blobs (and their checked-out form
in the work tree, either regular files or symlinks), and barfed when fed
submodules. This "externalizes" gitlinks in the same way as the normal
patch generation codepath does (i.e. "Subproject commit Xxx\n") to fix the
issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* kb/checkout-optim:
Revert "lstat_cache(): print a warning if doing ping-pong between cache types"
checkout bugfix: use stat.mtime instead of stat.ctime in two places
Makefile: Set compiler switch for USE_NSEC
Create USE_ST_TIMESPEC and turn it on for Darwin
Not all systems use st_[cm]tim field for ns resolution file timestamp
Record ns-timestamps if possible, but do not use it without USE_NSEC
write_index(): update index_state->timestamp after flushing to disk
verify_uptodate(): add ce_uptodate(ce) test
make USE_NSEC work as expected
fix compile error when USE_NSEC is defined
check_updates(): effective removal of cache entries marked CE_REMOVE
lstat_cache(): print a warning if doing ping-pong between cache types
show_patch_diff(): remove a call to fstat()
write_entry(): use fstat() instead of lstat() when file is open
write_entry(): cleanup of some duplicated code
create_directories(): remove some memcpy() and strchr() calls
unlink_entry(): introduce schedule_dir_for_removal()
lstat_cache(): swap func(length, string) into func(string, length)
lstat_cache(): generalise longest_match_lstat_cache()
lstat_cache(): small cleanup and optimisation
|
|
These weren't used outside and can be safely moved
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently inside show_patch_diff() we have an fstat() call after an
ok lstat() call. Since before the call to fstat() we have already
tested for the link case with S_ISLNK(), the fstat() can be removed.
Signed-off-by: Kjetil Barvik <barvik@broadpark.no>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When showing combined diff using work tree contents, use strbuf_readlink()
to read symbolic links.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We're going to be adding some parameters to this, so we can't have
any uninitialized data in it.
Signed-off-by: Brian Downing <bdowning@lavos.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many call sites use strbuf_init(&foo, 0) to initialize local
strbuf variable "foo" which has not been accessed since its
declaration. These can be replaced with a static initialization
using the STRBUF_INIT macro which is just as readable, saves a
function call, and takes up fewer lines.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* jc/diff-prefix:
diff: vary default prefix depending on what are compared
|
|
* jc/hide-cr-in-diff-from-less:
diff: Help "less" hide ^M from the output
|
|
With a new configuration "diff.mnemonicprefix", "git diff" shows the
differences between various combinations of preimage and postimage trees
with prefixes different from the standard "a/" and "b/". Hopefully this
will make the distinction stand out for some people.
"git diff" compares the (i)ndex and the (w)ork tree;
"git diff HEAD" compares a (c)ommit and the (w)ork tree;
"git diff --cached" compares a (c)ommit and the (i)ndex;
"git-diff HEAD:file1 file2" compares an (o)bject and a (w)ork tree entity;
"git diff --no-index a b" compares two non-git things (1) and (2).
Because these mnemonics now have meanings, they are swapped when reverse
diff is in effect and this feature is enabled.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the tracked contents have CRLF line endings, colored diff output
shows "^M" at the end of output lines, which is distracting, even though
the pager we use by default ("less") knows to hide them.
The problem is that "less" hides a carriage-return only at the end of the
line, immediately before a line feed. The colored diff output does not
take this into account, and emits four element sequence for each line:
- force this color;
- the line up to but not including the terminating line feed;
- reset color
- line feed.
By including the carriage return at the end of the line in the second
item, we are breaking the smart our pager has in order not to show "^M".
This can be fixed by changing the sequence to:
- force this color;
- the line up to but not including the terminating end-of-line;
- reset color
- end-of-line.
where end-of-line is either a single linefeed or a CRLF pair. When the
output is not colored, "force this color" and "reset color" sequences are
both empty, so we won't have this problem with or without this patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
|
|
Fix git-diff to make it produce useful 3-way diffs for merge conflicts in
repositories with autocrlf enabled. Otherwise it always reports that the
whole file was changed, because it uses the contents from the working tree
without necessary conversion.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This further enhances xdi_diff_outf() interface so that it takes two
common parameters: the callback function that processes one line at a
time, and a pointer to its application specific callback data structure.
xdi_diff_outf() creates its own "xdiff_emit_state" structure and stashes
these two away inside it, which is used by the lowest level output
function in the xdiff_outf() callchain, consume_one(), to call back to the
application layer. With this restructuring, we lift the requirement that
the caller supplied callback data structure embeds xdiff_emit_state
structure as its first member.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To prepare for the need to initialize and release resources for an
xdi_diff with the xdiff_outf output function, make a new function to
wrap this usage.
Old:
ecb.outf = xdiff_outf;
ecb.priv = &state;
...
xdi_diff(file_p, file_o, &xpp, &xecfg, &ecb);
New:
xdi_diff_outf(file_p, file_o, &state.xm, &xpp, &xecfg, &ecb);
Signed-off-by: Brian Downing <bdowning@lavos.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-combine-diff-pre-context:
diff -c/--cc: do not include uninteresting deletion before leading context
|
|
When we include a few uninteresting lines before the interesting ones as
context, we are only interested in seeing the surviving lines themselves
and not the deleted lines that are before them. Mark the added leading
context lines in give_context() and not show deleted lines form them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These variables were made unnecessary by commit
3969cf7db1a13a78f3b7a36d8c1084bbe0a53459.
Signed-off-by: Adam Simpkins <adam@adamsimpkins.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The resulting data is zero terminated after the read loop, but
the subsequent loop that scans for '\n' will overrun the buffer.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This moves the logic to quote two paths (prefix + path) in
C-style introduced in the previous commit from the
dump_quoted_path() in combine-diff.c to quote.c, and uses it to
fix rewrite_diff() that never C-quoted the pathnames correctly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Earlier when showing combined diff, the filenames on the ---/+++
header lines were quoted incorrectly. a/ (or b/) prefix was
output literally and then the path was output, with c-quoting.
This fixes the quoting logic, and while at it, adjusts the code
to use the customizable prefix (a_prefix and b_prefix)
introduced recently.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This inserts a new function xdi_diff() that currently does not
do anything other than calling the underlying xdl_diff() to the
callchain of current callers of xdl_diff() function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
reverse_diff was a bit-value in disguise, it's merged in the flags now.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* quote_c_style works on a strbuf instead of a wild buffer.
* quote_c_style is now clever enough to not add double quotes if not needed.
* write_name_quoted inherits those advantages, but also take a different
set of arguments. Now instead of asking for quotes or not, you pass a
"terminator". If it's \0 then we assume you don't want to escape, else C
escaping is performed. In any case, the terminator is also appended to the
stream. It also no longer takes the prefix/prefix_len arguments, as it's
seldomly used, and makes some optimizations harder.
* write_name_quotedpfx is created to work like write_name_quoted and take
the prefix/prefix_len arguments.
Thanks to those API changes, diff.c has somehow lost weight, thanks to the
removal of functions that were wrappers around the old write_name_quoted
trying to give it a semantics like the new one, but performing a lot of
allocations for this goal. Now we always write directly to the stream, no
intermediate allocation is performed.
As a side effect of the refactor in builtin-apply.c, the length of the bar
graphs in diffstats are not affected anymore by the fact that the path was
clipped.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
|
|
The instances of xdemitconf_t were initialized member by member.
Instead, initialize them to all zero, so we do not have
to update those places each time we introduce a new member.
[jc: minimally fixed by getting rid of a new global]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch fixes all calls to xread() where the return value is not
stored into an ssize_t. The patch should not have any effect whatsoever,
other than putting better/more appropriate type names on variables.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This enhances the attributes mechanism so that external programs
meant for existing GIT_EXTERNAL_DIFF interface can be specifed
per path.
To configure such a custom diff driver, first define a custom
diff driver in the configuration:
[diff "my-c-diff"]
command = <<your command string comes here>>
Then mark the paths that you want to use this custom driver
using the attribute mechanism.
*.c diff=my-c-diff
The intent of this separation is that the attribute mechanism is
used for specifying the type of the contents, while the
configuration mechanism is used to define what needs to be done
to that type of the contents, which would be specific to both
platform and personal taste.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Some systems have sizeof(off_t) == 8 while sizeof(size_t) == 4.
This implies that we are able to access and work on files whose
maximum length is around 2^63-1 bytes, but we can only malloc or
mmap somewhat less than 2^32-1 bytes of memory.
On such a system an implicit conversion of off_t to size_t can cause
the size_t to wrap, resulting in unexpected and exciting behavior.
Right now we are working around all gcc warnings generated by the
-Wshorten-64-to-32 option by passing the off_t through xsize_t().
In the future we should make xsize_t on such problematic platforms
detect the wrapping and die if such a file is accessed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When core.symlinks is false, and a merge of symbolic links had conflicts,
the merge result is left as a file in the working directory. A decision
must be made whether the file is treated as a regular file or as a
symbolic link. This patch treats the file as a symbolic link only if
all merge parents were also symbolic links.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We currently have two parallel notation for dealing with object types
in the code: a string and a numerical value. One of them is obviously
redundent, and the most used one requires more stack space and a bunch
of strcmp() all over the place.
This is an initial step for the removal of the version using a char array
found in object reading code paths. The patch is unfortunately large but
there is no sane way to split it in smaller parts without breaking the
system.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Few of us use git to compare or even version-control 2GB files,
but when we do, we'll want it to work.
Reading a recent patch, I noticed two lines like this:
int len = st.st_size;
Instead of "int", that should be "size_t". Otherwise, in the
non-symlink case, with 64-bit size_t, if the file's size is 2GB,
the following xmalloc will fail:
result = xmalloc(len + 1);
trying to allocate 2^64 - 2^31 + 1 bytes (assuming sign-extension
in the int-to-size_t promotion). And even if it didn't fail, the
subsequent "result[len] = 0;" would be equivalent to an unpleasant
"result[-2147483648] = 0;"
The other nearby "int"-declared size variable, sz, should also be of
type size_t, for the same reason. If sz ever wraps around and becomes
negative, xread will corrupt memory _before_ the "result" buffer.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
"git-diff-files --cc" to show conflicts during merge did not pass
the correct mode information for the working tree down, and showed
bogus combined diff.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Even when --unified=0 is given, the main loop to show the
combined textual diff needs to handle a line that is unchanged
but has lines that were deleted relative to a parent before it
(because that is where the lost lines hang). However, such a
line should not be emitted in the final output.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* jc/combined:
combine-diff: honour --no-commit-id
combine-diff: fix hunk_comment_line logic.
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We forgot that the last element of sline[] is a sentinel without
the actual line. *BLUSH*
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* jc/combined:
combine-diff: a few more finishing touches.
Documentation: clarify refname disambiguation rules.
diff-format.txt: Combined diff format documentation supplement
Remove --syslog in git-daemon inetd documentation examples.
Documentation: updates to "Everyday GIT"
|
|
"new file" and "deleted file" were already reported in the
original code, but the logic was not as transparent as it could
have. This uses a few variables and more comments to clarify
the flow. The rule is: (1) if a path exists in the merge result
when no parent had it, we report "new" (otherwise it came from
the parents, as opposed to have added by the evil merge). (2) if
the path does not exist in the merge result, it is "deleted".
Since we can say "new" and "deleted", there is no reason not to
follow the /dev/null convention. This fixes it.
Appending function name after @@@ ... @@@ is trivial, so
implement it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
[jc: with documentation from Jakub]
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.
A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*. This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.
[jc: Splitted the patch to "master" part, to be followed by a
patch for merge-recursive.c which is not in "master" yet.
Fixed the cast in the latter hunk to combine-diff.c which was
wrong in the original.
Also converted ones left-over in combine-diff.c, diff-lib.c and
upload-pack.c ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Introduces global inline:
hashcmp(const unsigned char *sha1, const unsigned char *sha2)
Uses memcmp for comparison and returns the result based on the length of
the hash name (a future runtime decision).
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Replace sha1 comparisons to null_sha1 with a global inline (which previously an
unused static inline in builtin-apply.c)
[jc: with a fix from Jonas Fonseca.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
A patch from David Rientjes made me realize we do not have to have
this function -- just call diff_unmodified_pair() directly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The other function, show_raw_diff() is void and no callers use
return value from neither.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Using the same mechanism as the regular diffs, color combined diff
output.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* th/diff:
builtin-diff: turn recursive on when defaulting to --patch format.
t4013: note improvements brought by the new output code.
t4013: add format-patch tests.
format-patch: fix diff format option implementation
combine-diff.c: type sanity.
t4013 test updates for new output code.
Fix some more diff options changes.
Fix diff-tree -s
log --raw: Don't descend into subdirectories by default
diff-tree: Use ---\n as a message separator
Print empty line between raw, stat, summary and patch
t4013: add more tests around -c and --cc
whatchanged: Default to DIFF_FORMAT_RAW
Don't xcalloc() struct diffstat_t
Add msg_sep to diff_options
DIFF_FORMAT_RAW is not default anymore
Set default diff output format after parsing command line
Make --raw option available for all diff commands
Merge with_raw, with_stat and summary variables to output_format
t4013: add tests for diff/log family output options.
|
|
In diff_tree_combined(), show_log_first boolean is initialized with
rev->loginfo (pointer to a string); the intention is that if we have
some string to be emitted we would want to remember that fact. Picky
compilers are offended by this, so make the expression a bit type-safer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
- combine_diff() took cnt (count) which is unsigned in nature but the
parameter type was declared as "int";
- find_next() took "uninteresting" parameter, which masked a static
function of the same name;
- show_parent_lno() took an unused parameter "cnt";
- show_patch_diff() used a local variable in nested inner scope with
the same name with different type, masking the one in the outer scope;
- the last loop in show_patch_diff iterated over lines so it should use
the local variable "lno"
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This fixes various problems in the new diff options code.
- Fix --cc/-c --patch; it showed two-tree diff used internally.
- Use "---\n" only where it matters -- that is, use it
immediately after the commit log text when we show a
commit log and something else before the patch text.
- Do not output spurious extra "\n"; have an extra newline
after the commit log text always when we have diff output and
we are not doing oneline.
- When running a pickaxe you need to go recursive.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Add msg_sep variable to struct diff_options. msg_sep is printed after
commit message. Default is "\n", format-patch sets it to "---\n".
This also removes the second argument from show_log() because all
callers derived it from the first argument:
show_log(rev, rev->loginfo, ...
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
DIFF_FORMAT_* are now bit-flags instead of enumerated values.
Signed-off-by: Timo Hirvonen <tihirvon@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We used to parse "-U" and "--unified" as part of the GIT_DIFF_OPTS
environment variable, but strangely enough we would _not_ parse them as
part of the normal diff command line (where we only accepted "-u").
This adds parsing of -U and --unified, both with an optional numeric
argument. So now you can just say
git diff --unified=5
to get a unified diff with a five-line context, instead of having to do
something silly like
GIT_DIFF_OPTS="--unified=5" git diff -u
(that silly format does continue to still work, of course).
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
"git diff(n)" without --base, --ours, etc. defaults to --cc,
which usually is the same as -p unless you are in the middle of
a conflicted merge, just like the shell script version.
"git diff(n) blobA blobB path" complains and dies.
"git diff(n) tree0 tree1 tree2...treeN" does combined diff that
shows a merge of tree1..treeN to result in tree0.
Giving "-c" option to any command that defaults to "--cc" turns
off dense-combined flag.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* lt/logopt:
Fix "git log --stat": make sure to set recursive with --stat.
combine-diff: show diffstat with the first parent.
git.c: LOGSIZE is unused after log printing cleanup.
Log message printout cleanups (#3): fix --pretty=oneline
Log message printout cleanups (#2)
Log message printout cleanups
rev-list --header: output format fix
Fixes for option parsing
log/whatchanged/show - log formatting cleanup.
Simplify common default options setup for built-in log family.
Tentative built-in "git show"
Built-in git-whatchanged.
rev-list option parser fix.
Split init_revisions() out of setup_revisions()
Fix up rev-list option parsing.
Fix up default abbrev in setup_revisions() argument parser.
Common option parsing for "git log --diff" and friends
|
|
Asking for stat (either with --stat or --patch-with-stat) gives
you diffstat for the first parent, even under combine-diff.
While the combined patch is useful to highlight the complexity
and interaction of the parts touched by all branches when
reviewing a merge commit, diffstat is a tool to assess the
extent of damage the merge brings in, and showing stat with the
first parent is more sensible than clever per-parent diffstat.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Here's a further patch on top of the previous one with cosmetic
improvements (no "real" code changes, just trivial updates):
- it gets the "---" before a diffstat right, including for the combined
merge case. Righ now the logic is that we always use "---" when we have
a diffstat, and an empty line otherwise. That's how I visually prefer
it, but hey, it can be tweaked later.
- I made "diff --cc/combined" add the "---/+++" header lines too. The
thing won't be mistaken for a valid diff, since the "@@" lines have too
many "@" characters (three or more), but it just makes it visually
match a real diff, which at least to me makes a big difference in
readability. Without them, it just looks very "wrong".
I guess I should have taken the filename from each individual entry
(and had one "---" file per parent), but I didn't even bother to try to
see how that works, so this was the simple thing.
With this, doing a
git log --cc --patch-with-stat
looks quite readable, I think. The only nagging issue - as far as I'm
concerned - is that diffstats for merges are pretty questionable the way
they are done now. I suspect it would be better to just have the _first_
diffstat, and always make the merge diffstat be the one for "result
against first parent".
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
On Sun, 16 Apr 2006, Junio C Hamano wrote:
>
> In the mid-term, I am hoping we can drop the generate_header()
> callchain _and_ the custom code that formats commit log in-core,
> found in cmd_log_wc().
Ok, this was nastier than expected, just because the dependencies between
the different log-printing stuff were absolutely _everywhere_, but here's
a patch that does exactly that.
The patch is not very easy to read, and the "--patch-with-stat" thing is
still broken (it does not call the "show_log()" thing properly for
merges). That's not a new bug. In the new world order it _should_ do
something like
if (rev->logopt)
show_log(rev, rev->logopt, "---\n");
but it doesn't. I haven't looked at the --with-stat logic, so I left it
alone.
That said, this patch removes more lines than it adds, and in particular,
the "cmd_log_wc()" loop is now a very clean:
while ((commit = get_revision(rev)) != NULL) {
log_tree_commit(rev, commit);
free(commit->buffer);
commit->buffer = NULL;
}
so it doesn't get much prettier than this. All the complexity is entirely
hidden in log-tree.c, and any code that needs to flush the log literally
just needs to do the "if (rev->logopt) show_log(...)" incantation.
I had to make the combined_diff() logic take a "struct rev_info" instead
of just a "struct diff_options", but that part is pretty clean.
This does change "git whatchanged" from using "diff-tree" as the commit
descriptor to "commit", and I changed one of the tests to reflect that new
reality. Otherwise everything still passes, and my other tests look fine
too.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Mod_type in particular sure looks like it wants to be used, but isn't.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* jc/combine:
stripspace: make sure not to leave an incomplete line.
git-commit: do not muck with commit message when no_edit is set.
When showing a commit message, do not lose an incomplete line.
Retire t5501-old-fetch-and-upload test.
combine-diff: type fix.
|
|
The variable hunk_end points at a line number, which is
represented as unsigned long by all the other variables.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* jc/combine:
combine-diff: fix hunks at the end (take #2).
combine-diff: do not lose hunks with only deletion at end.
|
|
The previous round showed the delete-only hunks at the end, but
forgot to mark them interesting when they were.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We used to lose hunks that appear at the end and have only
deletion. This makes sure that the record beyond the end of
file (which holds such deletions) is examined.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
More friendly for human reading I believe, and possibly friendlier to some
parsers (although only by an epsilon).
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This new flag outputs the diff-raw output and diff-patch output
at the same time. Requested by Cogito.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This refactors the line-by-line callback mechanism used in
combine-diff so that other programs can reuse it more easily.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Now there is no GNU diff invocations, except the one from
blame.c
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This replaces occurences of "blob", "commit", "tag", and "tree",
where they're really used as type specifiers, which we already
have defined global constants for.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Introduce tree-walk.[ch] and move "struct tree_desc" and
associated functions from various places.
Rename DIFF_FILE_CANON_MODE(mode) macro to canon_mode(mode) and
move it to cache.h. This macro returns the canonicalized
st_mode value in the host byte order for files, symlinks and
directories -- to be compared with a tree_desc entry.
create_ce_mode(mode) in cache.h is similar but is intended to be
used for index entries (so it does not work for directories) and
returns the value in the network byte order.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Combined diffs don't null terminate things in the same way as standard
diffs. This is presumably wrong.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
For some reason, combined diffs don't honour the --full-index flag when
emitting patches. Fix this.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When showing a conflicted merge from index stages and working
tree file, we did not fetch the mode from the working tree,
and mistook that as a deleted file. Also if the manual
resolution (or automated resolution by git rerere) ended up
taking either parent's version, we did not show _anything_ for
that path. Either was quite bad and confusing.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
