| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Hashmap comparison functions must conform to a particular callback
interface, but many don't use all of their parameters. Especially the
void cmp_data pointer, but some do not use keydata either (because they
can easily form a full struct to pass when doing lookups). Let's mark
these to make -Wunused-parameter happy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The callback passed to git_config() must conform to a particular
interface. But most callbacks don't actually look at the extra "void
*data" parameter. Let's mark the unused parameters to make
-Wunused-parameter happy.
Note there's one unusual case here in get_remote_default() where we
actually ignore the "value" parameter. That's because it's only checking
whether the option is found at all, and not parsing its value.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The description of 'PARSE_OPT_KEEP_UNKNOWN' starts with "Keep unknown
arguments instead of erroring out". This is a bit misleading, as this
flag only applies to unknown --options, while non-option arguments are
kept even without this flag.
Update the description to clarify this, and rename the flag to
PARSE_OPTIONS_KEEP_UNKNOWN_OPT to make this obvious just by looking at
the flag name.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add Coccinelle rules to detect the pattern of initializing and then
finalizing a structure without using it in between at all, which
happens after code restructuring and the compilers fail to
recognize as an unused variable.
* ab/cocci-unused:
cocci: generalize "unused" rule to cover more than "strbuf"
cocci: add and apply a rule to find "unused" strbufs
cocci: have "coccicheck{,-pending}" depend on "coccicheck-test"
cocci: add a "coccicheck-test" target and test *.cocci rules
Makefile & .gitignore: ignore & clean "git.res", not "*.res"
Makefile: remove mandatory "spatch" arguments from SPATCH_FLAGS
|
|
Add a coccinelle rule to remove "struct strbuf" initialization
followed by calling "strbuf_release()" function, without any uses of
the strbuf in the same function.
See the tests in contrib/coccinelle/tests/unused.{c,res} for what it's
intended to find and replace.
The inclusion of "contrib/scalar/scalar.c" is because "spatch" was
manually run on it (we don't usually run spatch on contrib).
Per the "buggy code" comment we also match a strbuf_init() before the
xmalloc(), but we're not seeking to be so strict as to make checks
that the compiler will catch for us redundant. Saying we'll match
either "init" or "xmalloc" lines makes the rule simpler.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows us once again to get away with less data copying.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git uses temporary files to pass the contents of blobs to external diff
programs and textconv filters. It calls mks_tempfile_ts() to create
them, which puts them all in the same directory. This requires adding
a random name prefix.
Use mks_tempfile_dt() instead, which allows the files to have arbitrary
names, each in their own separate temporary directory. This way they
can have the same basename as the original blob, which looks nicer in
graphical diff programs.
The test in t4020 to check the prettiness of the temporary paths was
neutered by 5476bdf0e8 (diff tests: don't ignore "git diff" exit code in
"read" loop, 2022-03-07), which removed its grep check without replacing
it with an equivalent test_cmp check. Add one that only checks the
basename of the temporary file and nothing else.
And make the test more robust while at it, by using test_when_finished
to get rid of the added file even if the test fails.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Double-free fix for a recently merged topic.
* ab/plug-random-leaks:
diff.c: fix a double-free regression in a18d66cefb
tests: demonstrate "show --word-diff --color-moved" regression
|
|
My a18d66cefb9 (diff.c: free "buf" in diff_words_flush(), 2022-03-04)
has what it retrospect is a rather obvious bug (I don't know what I
was thinking, if it all): We use the "emitted_symbols" allocation in
append_emitted_diff_symbol() N times, but starting with a18d66cefb9
we'd free it after its first use!
The correct way to free this data would have been to add the free() to
the existing free_diff_words_data() function, so let's do that. The
"ecbdata->diff_words->opt->emitted_symbols" might be NULL, so let's
add a trivial free_emitted_diff_symbols() helper next to the function
that appends to it.
This fixes the "no effect on show from" leak tested for in the
preceding commit. Perhaps confusingly this change will skip that test
under SANITIZE=leak, but otherwise opt-in the
"t4015-diff-whitespace.sh" test.
The reason is that a18d66cefb9 "fixed" the leak in the preceding "no
effect on diff" test, but for the first call to diff_words_flush() the
"wol->buf" would be NULL, so we wouldn't double-free (and
SANITIZE=address would see nothing amiss). With this change we'll
still pass that test, showing that we've also fixed leaks on this
codepath.
We then have to skip the new "no effect on show" test because it
happens to trip over an unrelated memory leak (in revision.c). The
same goes for "move detection with submodules". Both of them pass with
SANITIZE=address though, which would error on the "no effect on show"
test before this change.
Reported-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Plug random memory leaks.
* ab/plug-random-leaks:
repository.c: free the "path cache" in repo_clear()
range-diff: plug memory leak in read_patches()
range-diff: plug memory leak in common invocation
lockfile API users: simplify and don't leak "path"
commit-graph: stop fill_oids_from_packs() progress on error and free()
commit-graph: fix memory leak in misused string_list API
submodule--helper: fix trivial leak in module_add()
transport: stop needlessly copying bundle header references
bundle: call strvec_clear() on allocated strvec
remote-curl.c: free memory in cmd_main()
urlmatch.c: add and use a *_release() function
diff.c: free "buf" in diff_words_flush()
merge-base: free() allocated "struct commit **" list
index-pack: fix memory leaks
|
|
Usage-string normalization.
* ac/usage-string-fixups:
amend remaining usage strings according to style guide
|
|
Amend the freeing logic added in e6e045f8031 (diff.c: buffer all
output if asked to, 2017-06-29) to free the containing "buf" in
addition to its members.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leakfixes.
* ab/diff-free-more:
diff.[ch]: have diff_free() free options->parseopts
diff.[ch]: have diff_free() call clear_pathspec(opts.pathspec)
|
|
Usage strings for git (sub)command flags has a style guide that
suggests - first letter should not capitalized (unless required)
and it should skip full-stop at the end of line. But there are
some files where usage-strings do not follow the above mentioned
guide.
Amend the usage strings that don't follow the style convention/guide.
Signed-off-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff --diff-filter=aR" is now parsed correctly.
* js/diff-filter-negation-fix:
diff-filter: be more careful when looking for negative bits
diff.c: move the diff filter bits definitions up a bit
docs(diff): lose incorrect claim about `diff-files --diff-filter=A`
|
|
"git log --remerge-diff" shows the difference from mechanical merge
result and the result that is actually recorded in a merge commit.
* en/remerge-diff:
diff-merges: avoid history simplifications when diffing merges
merge-ort: mark conflict/warning messages from inner merges as omittable
show, log: include conflict/warning messages in --remerge-diff headers
diff: add ability to insert additional headers for paths
merge-ort: format messages slightly different for use in headers
merge-ort: mark a few more conflict messages as omittable
merge-ort: capture and print ll-merge warnings in our preferred fashion
ll-merge: make callers responsible for showing warnings
log: clean unneeded objects during `log --remerge-diff`
show, log: provide a --remerge-diff capability
|
|
The "struct option" added in 4a288478394 (diff.c: prepare to use
parse_options() for parsing, 2019-01-27) would be free'd in the case
of diff_setup_done() being called.
But not all codepaths that allocate it reach that,
e.g. "t6427-diff3-conflict-markers.sh" will now free memory that it
didn't free before. By using FREE_AND_NULL() here (which
diff_setup_done() also does) we ensure that we free the memory, and
that we won't have double-free's.
Before this running:
./t6427-diff3-conflict-markers.sh -vixd --run=7
Would report:
SUMMARY: LeakSanitizer: 7823 byte(s) leaked in 6 allocation(s).
But now we'll report:
SUMMARY: LeakSanitizer: 703 byte(s) leaked in 5 allocation(s).
I.e. the largest leak in that particular test has now been addressed.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Have the diff_free() function call clear_pathspec(). Since the
diff_flush() function calls this all its callers can be simplified to
rely on it instead.
When I added the diff_free() function in e900d494dcf (diff: add an API
for deferred freeing, 2021-02-11) I simply missed this, or wasn't
interested in it. Let's consolidate this now. This means that any
future callers (and I've got revision.c in mind) that embed a "struct
diff_options" can simply call diff_free() instead of needing know that
it has an embedded pathspec.
This does fix a bunch of leaks, but I can't mark any test here as
passing under the SANITIZE=leak testing mode because in
886e1084d78 (builtin/: add UNLEAKs, 2017-10-01) an UNLEAK(rev) was
added, which plasters over the memory
leak. E.g. "t4011-diff-symlink.sh" would report fewer leaks with this
fix, but because of the UNLEAK() reports none.
I'll eventually loop around to removing that UNLEAK(rev) annotation as
I'll fix deeper issues with the revisions API leaking. This is one
small step on the way there, a new freeing function in revisions.c
will want to call this diff_free().
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When additional headers are provided, we need to
* add diff_filepairs to diff_queued_diff for each paths in the
additional headers map which, unless that path is part of
another diff_filepair already found in diff_queued_diff
* format the headers (colorization, line_prefix for --graph)
* make sure the various codepaths that attempt to return early
if there are "no changes" take into account the headers that
need to be shown.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `--diff-filter=<bits>` option allows to filter the diff by certain
criteria, for example `R` to only show renamed files. It also supports
negating a filter via a down-cased letter, i.e. `r` to show _everything
but_ renamed files.
However, the code is a bit overzealous when trying to figure out whether
`git diff` should start with all diff-filters turned on because the user
provided a lower-case letter: if the `--diff-filter` argument starts
with an upper-case letter, we must not start with all bits turned on.
Even worse, it is possible to specify the diff filters in multiple,
separate options, e.g. `--diff-filter=AM [...] --diff-filter=m`.
Let's accumulate the include/exclude filters independently, and only
special-case the "only exclude filters were specified" case after
parsing the options altogether.
Note: The code replaced by this commit took pains to avoid setting any
unused bits of `options->filter`. That was unnecessary, though, as all
accesses happen via the `filter_bit_tst()` function using specific bits,
and setting the unused bits has no effect. Therefore, we can simplify
the code by using `~0` (or in this instance, `~<unwanted-bit>`).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This prepares for a more careful handling of the `--diff-filter`
options over the next few commits.
This commit is best viewed with `--color-moved`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Similar message templates have been consolidated so that
translators need to work on fewer number of messages.
* ja/i18n-similar-messages:
i18n: turn even more messages into "cannot be used together" ones
i18n: ref-filter: factorize "%(foo) atom used without %(bar) atom"
i18n: factorize "--foo outside a repository"
i18n: refactor "unrecognized %(foo) argument" strings
i18n: factorize "no directory given for --foo"
i18n: factorize "--foo requires --bar" and the like
i18n: tag.c factorize i18n strings
i18n: standardize "cannot open" and "cannot read"
i18n: turn "options are incompatible" into "cannot be used together"
i18n: refactor "%s, %s and %s are mutually exclusive"
i18n: refactor "foo and bar are mutually exclusive"
|
|
Correctness and performance update to "diff --color-moved" feature.
* pw/diff-color-moved-fix:
diff --color-moved: intern strings
diff: use designated initializers for emitted_diff_symbol
diff --color-moved-ws=allow-indentation-change: improve hash lookups
diff --color-moved: stop clearing potential moved blocks
diff --color-moved: shrink potential moved blocks as we go
diff --color-moved: unify moved block growth functions
diff --color-moved: call comparison function directly
diff --color-moved-ws=allow-indentation-change: simplify and optimize
diff: simplify allow-indentation-change delta calculation
diff --color-moved: avoid false short line matches and bad zebra coloring
diff --color-moved=zebra: fix alternate coloring
diff --color-moved: rewind when discarding pmb
diff --color-moved: factor out function
diff --color-moved: clear all flags on blocks that are too short
diff --color-moved: add perf tests
|
|
Even if some of these messages are not subject to gettext i18n, this
helps bring a single style of message for a given error type.
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use placeholders for constant tokens. The strings are turned into
"cannot be used together"
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Reviewed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Taking inspiration from xdl_classify_record() assign an id to each
addition and deletion such that lines that match for the current
--color-moved-ws mode share the same unique id. This reduces the
number of hash lookups a little (calculating the ids still involves
one hash lookup per line) but the main benefit is that when growing
blocks of potentially moved lines we can replace string comparisons
which involve chasing a pointer with a simple integer comparison. On a
large diff this commit reduces the time to run 'diff --color-moved' by
37% compared to the previous commit and 31% compared to master, for
'diff --color-moved-ws=allow-indentation-change' the reduction is 28%
compared to the previous commit and 96% compared to master. There is
little change in the performance of 'git log --patch' as the diffs are
smaller.
Test HEAD^ HEAD
---------------------------------------------------------------------------------------------------------------
4002.1: diff --no-color-moved --no-color-moved-ws large change 0.38(0.33+0.05) 0.38(0.33+0.05) +0.0%
4002.2: diff --color-moved --no-color-moved-ws large change 0.88(0.81+0.06) 0.55(0.50+0.04) -37.5%
4002.3: diff --color-moved-ws=allow-indentation-change large change 0.85(0.79+0.06) 0.61(0.54+0.06) -28.2%
4002.4: log --no-color-moved --no-color-moved-ws 1.16(1.07+0.08) 1.15(1.09+0.05) -0.9%
4002.5: log --color-moved --no-color-moved-ws 1.31(1.22+0.08) 1.29(1.19+0.09) -1.5%
4002.6: log --color-moved-ws=allow-indentation-change 1.32(1.24+0.08) 1.31(1.18+0.13) -0.8%
Test master HEAD
---------------------------------------------------------------------------------------------------------------
4002.1: diff --no-color-moved --no-color-moved-ws large change 0.38 (0.33+0.05) 0.38(0.33+0.05) +0.0%
4002.2: diff --color-moved --no-color-moved-ws large change 0.80 (0.75+0.04) 0.55(0.50+0.04) -31.2%
4002.3: diff --color-moved-ws=allow-indentation-change large change 14.20(14.15+0.05) 0.61(0.54+0.06) -95.7%
4002.4: log --no-color-moved --no-color-moved-ws 1.15 (1.05+0.09) 1.15(1.09+0.05) +0.0%
4002.5: log --color-moved --no-color-moved-ws 1.30 (1.19+0.11) 1.29(1.19+0.09) -0.8%
4002.6: log --color-moved-ws=allow-indentation-change 1.70 (1.63+0.06) 1.31(1.18+0.13) -22.9%
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This makes it clearer which fields are being explicitly initialized
and will simplify the next commit where we add a new field to the
struct.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As libxdiff does not have a whitespace flag to ignore the indentation
the code for --color-moved-ws=allow-indentation-change uses
XDF_IGNORE_WHITESPACE and then filters out any hash lookups where
there are non-indentation changes. This filtering is inefficient as
we have to perform another string comparison.
By using the offset data that we have already computed to skip the
indentation we can avoid using XDF_IGNORE_WHITESPACE and safely remove
the extra checks which improves the performance by 11% and paves the
way for the elimination of string comparisons in the next commit.
This change slightly increases the run time of other --color-moved
modes. This could be avoided by using different comparison functions
for the different modes but after the next two commits there is no
measurable benefit in doing so.
There is a change in behavior for lines that begin with a form-feed or
vertical-tab character. Since b46054b374 ("xdiff: use
git-compat-util", 2019-04-11) xdiff does not treat '\f' or '\v' as
whitespace characters. This means that lines starting with those
characters are never considered to be blank and never match a line
that does not start with the same character. After this patch a line
matching "^[\f\v\r]*[ \t]*$" is considered to be blank by
--color-moved-ws=allow-indentation-change and lines beginning
"^[\f\v\r]*[ \t]*" can match another line if the suffixes match. This
changes the output of git show for d18f76dccf ("compat/regex: use the
regex engine from gawk for compat", 2010-08-17) as some lines in the
pre-image before a moved block that contain '\f' are now considered
moved as well as they match a blank line before the moved lines in the
post-image. This commit updates one of the tests to reflect this
change.
Test HEAD^ HEAD
--------------------------------------------------------------------------------------------------------------
4002.1: diff --no-color-moved --no-color-moved-ws large change 0.38(0.33+0.05) 0.38(0.33+0.05) +0.0%
4002.2: diff --color-moved --no-color-moved-ws large change 0.86(0.82+0.04) 0.88(0.84+0.04) +2.3%
4002.3: diff --color-moved-ws=allow-indentation-change large change 0.97(0.94+0.03) 0.86(0.81+0.05) -11.3%
4002.4: log --no-color-moved --no-color-moved-ws 1.16(1.07+0.09) 1.16(1.06+0.09) +0.0%
4002.5: log --color-moved --no-color-moved-ws 1.32(1.26+0.06) 1.33(1.27+0.05) +0.8%
4002.6: log --color-moved-ws=allow-indentation-change 1.35(1.29+0.06) 1.33(1.24+0.08) -1.5%
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
moved_block_clear() was introduced in 74d156f4a1 ("diff
--color-moved-ws: fix double free crash", 2018-10-04) to free the
memory that was allocated when initializing a potential moved
block. However since 21536d077f ("diff --color-moved-ws: modify
allow-indentation-change", 2018-11-23) initializing a potential moved
block no longer allocates any memory. Up until the last commit we were
relying on moved_block_clear() to set the `match` pointer to NULL when
a block stopped matching, but since that commit we do not clear a
moved block that does not match so it does not make sense to clear
them elsewhere.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rather than setting `match` to NULL and then looping over the list of
potential matched blocks for a second time to remove blocks with no
matches just filter out the blocks with no matches as we go.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After the last two commits pmb_advance_or_null() and
pmb_advance_or_null_multi_match() differ only in the comparison they
perform. Lets simplify the code by combining them into a single
function.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This change will allow us to easily combine pmb_advance_or_null() and
pmb_advance_or_null_multi_match() in the next commit. Calling
xdiff_compare_lines() directly rather than using a function pointer
from the hash map has little effect on the run time.
Test HEAD^ HEAD
-------------------------------------------------------------------------------------------------------------
4002.1: diff --no-color-moved --no-color-moved-ws large change 0.38(0.35+0.03) 0.38(0.32+0.06) +0.0%
4002.2: diff --color-moved --no-color-moved-ws large change 0.87(0.83+0.04) 0.87(0.80+0.06) +0.0%
4002.3: diff --color-moved-ws=allow-indentation-change large change 0.97(0.92+0.04) 0.97(0.93+0.04) +0.0%
4002.4: log --no-color-moved --no-color-moved-ws 1.17(1.06+0.10) 1.16(1.10+0.05) -0.9%
4002.5: log --color-moved --no-color-moved-ws 1.32(1.24+0.08) 1.31(1.22+0.09) -0.8%
4002.6: log --color-moved-ws=allow-indentation-change 1.36(1.25+0.10) 1.35(1.25+0.10) -0.7%
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we already have a block of potentially moved lines then as we move
down the diff we need to check if the next line of each potentially
moved line matches the current line of the diff. The implementation of
--color-moved-ws=allow-indentation-change was needlessly performing
this check on all the lines in the diff that matched the current line
rather than just the current line. To exacerbate the problem finding
all the other lines in the diff that match the current line involves a
fuzzy lookup so we were wasting even more time performing a second
comparison to filter out the non-matching lines. Fixing this reduces
time to run
git diff --color-moved-ws=allow-indentation-change v2.28.0 v2.29.0
by 93% compared to master and simplifies the code.
Test HEAD^ HEAD
---------------------------------------------------------------------------------------------------------------
4002.1: diff --no-color-moved --no-color-moved-ws large change 0.38 (0.35+0.03) 0.38(0.35+0.03) +0.0%
4002.2: diff --color-moved --no-color-moved-ws large change 0.86 (0.80+0.06) 0.87(0.83+0.04) +1.2%
4002.3: diff --color-moved-ws=allow-indentation-change large change 19.01(18.93+0.06) 0.97(0.92+0.04) -94.9%
4002.4: log --no-color-moved --no-color-moved-ws 1.16 (1.06+0.09) 1.17(1.06+0.10) +0.9%
4002.5: log --color-moved --no-color-moved-ws 1.32 (1.25+0.07) 1.32(1.24+0.08) +0.0%
4002.6: log --color-moved-ws=allow-indentation-change 1.71 (1.64+0.06) 1.36(1.25+0.10) -20.5%
Test master HEAD
---------------------------------------------------------------------------------------------------------------
4002.1: diff --no-color-moved --no-color-moved-ws large change 0.38 (0.33+0.05) 0.38(0.35+0.03) +0.0%
4002.2: diff --color-moved --no-color-moved-ws large change 0.80 (0.75+0.04) 0.87(0.83+0.04) +8.7%
4002.3: diff --color-moved-ws=allow-indentation-change large change 14.20(14.15+0.05) 0.97(0.92+0.04) -93.2%
4002.4: log --no-color-moved --no-color-moved-ws 1.15 (1.05+0.09) 1.17(1.06+0.10) +1.7%
4002.5: log --color-moved --no-color-moved-ws 1.30 (1.19+0.11) 1.32(1.24+0.08) +1.5%
4002.6: log --color-moved-ws=allow-indentation-change 1.70 (1.63+0.06) 1.36(1.25+0.10) -20.0%
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we reliably end a block when the sign changes we don't need
the whitespace delta calculation to rely on the sign.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When marking moved lines it is possible for a block of potential
matched lines to extend past a change in sign when there is a sequence
of added lines whose text matches the text of a sequence of deleted
and added lines. Most of the time either `match` will be NULL or
`pmb_advance_or_null()` will fail when the loop encounters a change of
sign but there are corner cases where `match` is non-NULL and
`pmb_advance_or_null()` successfully advances the moved block despite
the change in sign.
One consequence of this is highlighting a short line as moved when it
should not be. For example
-moved line # Correctly highlighted as moved
+short line # Wrongly highlighted as moved
context
+moved line # Correctly highlighted as moved
+short line
context
-short line
The other consequence is coloring a moved addition following a moved
deletion in the wrong color. In the example below the first "+moved
line 3" should be highlighted as newMoved not newMovedAlternate.
-moved line 1 # Correctly highlighted as oldMoved
-moved line 2 # Correctly highlighted as oldMovedAlternate
+moved line 3 # Wrongly highlighted as newMovedAlternate
context # Everything else is highlighted correctly
+moved line 2
+moved line 3
context
+moved line 1
-moved line 3
These false matches are more likely when using --color-moved-ws with
the exception of --color-moved-ws=allow-indentation-change which ties
the sign of the current whitespace delta to the sign of the line to
avoid this problem. The fix is to check that the sign of the new line
being matched is the same as the sign of the line that started the
block of potential matches.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
b0a2ba4776 ("diff --color-moved=zebra: be stricter with color
alternation", 2018-11-23) sought to avoid using the alternate colors
unless there are two adjacent moved blocks of the same
sign. Unfortunately it contains two bugs that prevented it from fixing
the problem properly. Firstly `last_symbol` is reset at the start of
each iteration of the loop losing the symbol of the last line and
secondly when deciding whether to use the alternate color it should be
checking if the current line is the same sign of the last line, not a
different sign. The combination of the two errors means that we still
use the alternate color when we should do but we also use it when we
shouldn't. This is most noticable when using
--color-moved-ws=allow-indentation-change with hunks like
-this line gets indented
+ this line gets indented
where the post image is colored with newMovedAlternate rather than
newMoved. While this does not matter much, the next commit will change
the coloring to be correct in this case, so lets fix the bug here to
make it clear why the output is changing and add a regression test.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This code is quite heavily indented and having it in its own function
simplifies an upcoming change.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a block of potentially moved lines is not long enough then the
DIFF_SYMBOL_MOVED_LINE flag is cleared on the matching lines so they
are not marked as moved. To avoid problems when we start rewinding
after an unsuccessful match in a couple of commits time make sure all
the move related flags are cleared, not just DIFF_SYMBOL_MOVED_LINE.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change a pattern of hardcoding an "argv" array size, populating it and
assigning to the "argv" member of "struct child_process" to instead
use "strvec_push()" to add data to the "args" member.
As noted in the preceding commit this moves us further towards being
able to remove the "argv" member in a subsequent commit
These callers could have used strvec_pushl(), but moving to
strvec_push() makes the diff easier to read, and keeps the arguments
aligned as before.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In C it isn't required to specify that all members of a struct are
zero'd out to 0, NULL or '\0', just providing a "{ 0 }" will
accomplish that.
Let's also change code that provided N zero'd fields to just
provide one, and change e.g. "{ NULL }" to "{ 0 }" for
consistency. I.e. even if the first member is a pointer let's use "0"
instead of "NULL". The point of using "0" consistently is to pick one,
and to not have the reader wonder why we're not using the same pattern
everywhere.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The diff_populate_filespec() method is used to describe the diff after a
merge operation is complete. In order to avoid expanding a sparse index,
the reuse_worktree_file() needs to be adapted to ignore files that are
outside of the sparse-checkout cone. The file names and OIDs used for
this check come from the merged tree in the case of the ORT strategy,
not the index, hence the ability to look into these paths without having
already expanded the index.
The work done by reuse_worktree_file() is only an optimization, and
requires the file being on disk for it to be of any value. Thus, it is
safe to exit the method early if we do not expect the file on disk.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/pickaxe-pcre2:
diff: --pickaxe-all typofix
|
|
When I was fixing fuzzies as I updating po/id.po for 2.33.0 l10n round,
I noticed a triple-dash typo (--pickaxe-all) at diff.c, which according
to git-diff(1) manpage, the correct option name should be --pickaxe-all.
Fix the typo.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Documentation on "git diff -l<n>" and diff.renameLimit have been
updated, and the defaults for these limits have been raised.
* en/rename-limits-doc:
rename: bump limit defaults yet again
diffcore-rename: treat a rename_limit of 0 as unlimited
doc: clarify documentation for rename/copy limits
diff: correct warning message when renameLimit exceeded
|
|
These were last bumped in commit 92c57e5c1d29 (bump rename limit
defaults (again), 2011-02-19), and were bumped both because processors
had gotten faster, and because people were getting ugly merges that
caused problems and reporting it to the mailing list (suggesting that
folks were willing to spend more time waiting).
Since that time:
* Linus has continued recommending kernel folks to set
diff.renameLimit=0 (maps to 32767, currently)
* Folks with repositories with lots of renames were happy to set
merge.renameLimit above 32767, once the code supported that, to
get correct cherry-picks
* Processors have gotten faster
* It has been discovered that the timing methodology used last time
probably used too large example files.
The last point is probably worth explaining a bit more:
* The "average" file size used appears to have been average blob size
in the linux kernel history at the time (probably v2.6.25 or
something close to it).
* Since bigger files are modified more frequently, such a computation
weights towards larger files.
* Larger files may be more likely to be modified over time, but are
not more likely to be renamed -- the mean and median blob size
within a tree are a bit higher than the mean and median of blob
sizes in the history leading up to that version for the linux
kernel.
* The mean blob size in v2.6.25 was half the average blob size in
history leading to that point
* The median blob size in v2.6.25 was about 40% of the mean blob size
in v2.6.25.
* Since the mean blob size is more than double the median blob size,
any file as big as the mean will not be compared to any files of
median size or less (because they'd be more than 50% dissimilar).
* Since it is the number of files compared that provides the O(n^2)
behavior, median-sized files should matter more than mean-sized
ones.
The combined effect of the above is that the file size used in past
calculations was likely about 5x too large. Combine that with a CPU
performance improvement of ~30%, and we can increase the limits by
a factor of sqrt(5/(1-.3)) = 2.67, while keeping the original stated
time limits.
Keeping the same approximate time limit probably makes sense for
diff.renameLimit (there is no progress feedback in e.g. git log -p),
but the experience above suggests merge.renameLimit could be extended
significantly. In fact, it probably would make sense to have an
unlimited default setting for merge.renameLimit, but that would
likely need to be coupled with changes to how progress is displayed.
(See https://lore.kernel.org/git/YOx+Ok%2FEYvLqRMzJ@coredump.intra.peff.net/
for details in that area.) For now, let's just bump the approximate
time limit from 10s to 1m.
(Note: We do not want to use actual time limits, because getting results
that depend on how loaded your system is that day feels bad, and because
we don't discover that we won't get all the renames until after we've
put in a lot of work rather than just upfront telling the user there are
too many files involved.)
Using the original time limit of 2s for diff.renameLimit, and bumping
merge.renameLimit from 10s to 60s, I found the following timings using
the simple script at the end of this commit message (on an AWS c5.xlarge
which reports as "Intel(R) Xeon(R) Platinum 8124M CPU @ 3.00GHz"):
N Timing
1300 1.995s
7100 59.973s
So let's round down to nice even numbers and bump the limits from
400->1000, and from 1000->7000.
Here is the measure_rename_perf script (adapted from
https://lore.kernel.org/git/20080211113516.GB6344@coredump.intra.peff.net/
in particular to avoid triggering the linear handling from
basename-guided rename detection):
#!/bin/bash
n=$1; shift
rm -rf repo
mkdir repo && cd repo
git init -q -b main
mkdata() {
mkdir $1
for i in `seq 1 $2`; do
(sed "s/^/$i /" <../sample
echo tag: $1
) >$1/$i
done
}
mkdata initial $n
git add .
git commit -q -m initial
mkdata new $n
git add .
cd new
for i in *; do git mv $i $i.renamed; done
cd ..
git rm -q -rf initial
git commit -q -m new
time git diff-tree -M -l0 --summary HEAD^ HEAD
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The warning when quadratic rename detection was skipped referred to
"inexact rename detection". For years, the only linear portion of
rename detection was looking for exact renames, so "inexact rename
detection" was an accurate way to refer to the quadratic portion of
rename detection. However, that changed with commit bd24aa2f97a0
(diffcore-rename: guide inexact rename detection based on basenames,
2021-02-14). Let's instead use the term "exhaustive rename detection"
to refer to the quadratic portion.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rewrite the backend for "diff -G/-S" to use pcre2 engine when
available.
* ab/pickaxe-pcre2: (22 commits)
xdiff-interface: replace discard_hunk_line() with a flag
xdiff users: use designated initializers for out_line
pickaxe -G: don't special-case create/delete
pickaxe -G: terminate early on matching lines
xdiff-interface: allow early return from xdiff_emit_line_fn
xdiff-interface: prepare for allowing early return
pickaxe -S: slightly optimize contains()
pickaxe: rename variables in has_changes() for brevity
pickaxe -S: support content with NULs under --pickaxe-regex
pickaxe: assert that we must have a needle under -G or -S
pickaxe: refactor function selection in diffcore-pickaxe()
perf: add performance test for pickaxe
pickaxe/style: consolidate declarations and assignments
diff.h: move pickaxe fields together again
pickaxe: die when --find-object and --pickaxe-all are combined
pickaxe: die when -G and --pickaxe-regex are combined
pickaxe tests: add missing test for --no-pickaxe-regex being an error
pickaxe tests: test for -G, -S and --find-object incompatibility
pickaxe tests: add test for "log -S" not being a regex
pickaxe tests: add test for diffgrep_consume() internals
...
|
|
The word-diff mode has been taught to work better with a word
regexp that can match an empty string.
* pw/word-diff-zero-width-matches:
word diff: handle zero length matches
|
|
Remove the dummy discard_hunk_line() function added in
3b40a090fd4 (diff: avoid generating unused hunk header lines,
2018-11-02) in favor of having a new XDL_EMIT_NO_HUNK_HDR flag, for
use along with the two existing and similar XDL_EMIT_* flags.
Unlike the recently amended xdiff_emit_line_fn interface which'll be
called in a loop in xdl_emit_diff(), the hunk header is only emitted
once.
It makes more sense to pass this as a flag than provide a dummy
callback because that function may be able to skip doing certain work
if it knows the caller is doing nothing with the hunk header.
It would be possible to do so in the case of -U0 now, but the benefit
of doing so is so small that I haven't bothered. But this leaves the
door open to that, and more importantly makes the API use more
intuitive.
The reason we're putting a flag in the gap between 1<<0 and 1<<2 is
that the old 1<<1 flag was removed in 907681e940d (xdiff: drop
XDL_EMIT_COMMON, 2016-02-23) without re-ordering the remaining flags.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the function prototype of xdiff_emit_line_fn to return an "int"
instead of "void". Change all of those functions to "return 0",
nothing checks those return values yet, and no behavior is being
changed.
In subsequent commits the interface will be changed to allow early
return via this new return value.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Neither the --pickaxe-all documentation nor --find-object's has ever
suggested that you can combine the two. See f506b8e8b5 (git log/diff:
add -G<regexp> that greps in the patch text, 2010-08-23) and
15af58c1ad (diffcore: add a pickaxe option to find a specific blob,
2018-01-04).
But we've silently tolerated it, which makes the logic in
diffcore_pickaxe() harder to reason about. Let's assert that we won't
have the two combined.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the -G and --pickaxe-regex options are combined we simply ignore
the --pickaxe-regex option. Let's die instead as suggested by our
documentation, since -G is always a regex.
When --pickaxe-regex was added in d01d8c6782 (Support for pickaxe
matching regular expressions, 2006-03-29) only the -S option
existed. Then when -G was added in f506b8e8b5 (git log/diff: add
-G<regexp> that greps in the patch text, 2010-08-23) neither the
documentation for --pickaxe-regex was updated accordingly, nor was
something like this assertion added.
Since 5bc3f0b567 (diffcore-pickaxe doc: document -S and -G properly,
2013-05-31) we've claimed that --pickaxe-regex should only be used
with -S, but have silently tolerated combining it with -G, let's die
instead.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If find_word_boundaries() encounters a zero length match (which can be
caused by matching a newline or using '*' instead of '+' in the regex)
we stop splitting the input into words which generates an inaccurate
diff. To fix this increment the start point when there is a zero
length match and try a new match. This is safe as posix regular
expressions always return the longest available match so a zero length
match means there are no longer matches available from the current
position.
Commit bf82940dbf1 (color-words: enable REG_NEWLINE to help user,
2009-01-17) prevented matching newlines in negated character classes
but it is still possible for the user to have an explicit newline
match in the regex which could cause a zero length match.
One could argue that having explicit newline matches or using '*'
rather than '+' are user errors but it seems to be better to work
round them than produce inaccurate diffs.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Up until recently, object IDs did not have an algorithm member, only a
hash. Consequently, it was possible to share one null (all-zeros)
object ID among all hash algorithms. Now that we're going to be
handling objects from multiple hash algorithms, it's important to make
sure that all object IDs have a correct algorithm field.
Introduce a per-algorithm null OID, and add it to struct hash_algo.
Introduce a wrapper function as well, and use it everywhere we used to
use the null_oid constant.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we're hashing a value which is going to be an object ID, we want to
zero-pad that value if necessary. To do so, use the final_oid_fn
instead of the final_fn anytime we're going to create an object ID to
ensure we perform this operation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add and apply a semantic patch for converting code that open-codes
CALLOC_ARRAY to use it instead. It shortens the code and infers the
element size automatically.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git {diff,log} --{skip,rotate}-to=<path>" allows the user to
discard diff output for early paths or move them to the end of the
output.
* jc/diffcore-rotate:
diff: --{rotate,skip}-to=<path>
|
|
In the implementation of "git difftool", there is a case where the
user wants to start viewing the diffs at a specific path and
continue on to the rest, optionally wrapping around to the
beginning. Since it is somewhat cumbersome to implement such a
feature as a post-processing step of "git diff" output, let's
support it internally with two new options.
- "git diff --rotate-to=C", when the resulting patch would show
paths A B C D E without the option, would "rotate" the paths to
shows patch to C D E A B instead. It is an error when there is
no patch for C is shown.
- "git diff --skip-to=C" would instead "skip" the paths before C,
and shows patch to C D E. Again, it is an error when there is no
patch for C is shown.
- "git log [-p]" also accepts these two options, but it is not an
error if there is no change to the specified path. Instead, the
set of output paths are rotated or skipped to the specified path
or the first path that sorts after the specified path.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a memory leak in 296d4a94e7 (diff: add -I<regex> that ignores
matching changes, 2020-10-20) by freeing the memory it allocates in
the newly introduced diff_free(). See the previous commit for details
on that.
This memory leak was intentionally introduced in 296d4a94e7, see the
discussion on a previous iteration of it in
https://lore.kernel.org/git/xmqqeelycajx.fsf@gitster.c.googlers.com/
At that time freeing the memory was somewhat tedious, but since it
isn't anymore with the newly introduced diff_free() let's use it.
Let's retain the pattern for diff_free_file() and add a
diff_free_ignore_regex(), even though (unlike "diff_free_file") we
don't need to call it elsewhere. I think this'll make for more
readable code than gradually accumulating a giant diff_free()
function, sharing "int i" across unrelated code etc.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a diff_free() function to free anything we may have allocated in
the "diff_options" struct, and the ability to make calling it a noop
by setting "no_free" in "diff_options".
This is required because when e.g. "git diff" is run we'll allocate
things in that struct, use the diff machinery once, and then exit.
But if we run e.g. "git log -p" we're going to re-use what we
allocated across multiple diff_flush() calls, and only want to free
things at the end.
We've thus ended up with features like the recently added "diff -I"[1]
where we'll leak memory. As it turns out it could have simply used the
pattern established in 6ea57703f6 (log: prepare log/log-tree to reuse
the diffopt.close_file attribute, 2016-06-22).
Manually adding more such flags to things log_tree_commit() every time
we need to allocate something would be tedious. Let's instead move
that fclose() code it to a new diff_free(), in anticipation of freeing
more things in that function in follow-up commits.
Some functions such as log_tree_commit() need an idiom of optionally
retaining a previous "no_free", as they may either free the memory
themselves, or their caller may do so. I'm keeping that idiom in
log_show_early() for good measure, even though I don't think it's
currently called in this manner. It also gets passed an existing
"struct rev_info", so future callers may want to set the "no_free"
flag.
This change is a bit hard to read because while the freeing pattern
we're introducing isn't unusual, the "file" member is a special
snowflake. We usually don't want to fclose() it. This is because
"file" is usually stdout, in which case we don't want to fclose()
it. We only want to opt-in to closing it when we e.g. open a file on
the filesystem. Thus the opt-in "close_file" flag.
So the API in general just needs a "no_free" flag to defer freeing,
but the "file" member still needs its "close_file" flag. This is made
more confusing because while refactoring this code we could replace
some "close_file=0" with "no_free=1", whereas others need to set both
flags.
This is because there were some cases where an existing "close_file=0"
meant "let's defer deallocation", and others where it meant "we don't
want to close this file handle at all".
1. 296d4a94e7 (diff: add -I<regex> that ignores matching changes,
2020-10-20)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff" showed a submodule working tree with untracked cruft as
"Submodule commit <objectname>-dirty", but a natural expectation is
that the "-dirty" indicator would align with "git describe --dirty",
which does not consider having untracked files in the working tree
as source of dirtiness. The inconsistency has been fixed.
* sj/untracked-files-in-submodule-directory-is-not-dirty:
diff: do not show submodule with untracked files as "-dirty"
|
|
"git diff -I<pattern> -exit-code" should exit with 0 status when
all the changes match the ignored pattern, but it didn't.
* jc/diff-I-status-fix:
diff: correct interaction between --exit-code and -I<pattern>
|
|
Just like "git diff -w --exit-code" should exit with 0 when ignoring
whitespace differences results in no changes shown, if ignoring
certain changes with "git diff -I<pattern> --exit-code" result in an
empty patch, we should exit with 0.
The test suite did not cover the interaction between "--exit-code"
and "-w"; add one while adding a new test for "--exit-code" + "-I".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Git diff reports a submodule directory as -dirty even when there are
only untracked files in the submodule directory. This is inconsistent
with what `git describe --dirty` says when run in the submodule
directory in that state.
Make `--ignore-submodules=untracked` the default for `git diff` when
there is no configuration variable or command line option, so that the
command would not give '-dirty' suffix to a submodule whose working
tree has untracked files, to make it consistent with `git
describe --dirty` that is run in the submodule working tree.
And also make `--ignore-submodules=none` the default for `git status`
so that the user doesn't end up deleting a submodule that has
uncommitted (untracked) files.
Signed-off-by: Sangeeta Jain <sangunb09@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A specialization of hashmap that uses a string as key has been
introduced. Hopefully it will see wider use over time.
* en/strmap:
shortlog: use strset from strmap.h
Use new HASHMAP_INIT macro to simplify hashmap initialization
strmap: take advantage of FLEXPTR_ALLOC_STR when relevant
strmap: enable allocations to come from a mem_pool
strmap: add a strset sub-type
strmap: split create_entry() out of strmap_put()
strmap: add functions facilitating use as a string->int map
strmap: enable faster clearing and reusing of strmaps
strmap: add more utility functions
strmap: new utility functions
hashmap: provide deallocation function names
hashmap: introduce a new hashmap_partial_clear()
hashmap: allow re-use after hashmap_free()
hashmap: adjust spacing to fix argument alignment
hashmap: add usage documentation explaining hashmap_free[_entries]()
|
|
Running "git diff" while allowing external diff in a state with
unmerged paths used to segfault, which has been corrected.
* jk/diff-release-filespec-fix:
t7800: simplify difftool test
diff: allow passing NULL to diff_free_filespec_data()
|
|
Commit 3aef54e8b8 ("diff: munmap() file contents before running external
diff") introduced calls to diff_free_filespec_data in
run_external_diff, which may pass NULL pointers.
Fix this and prevent any such bugs in the future by making
`diff_free_filespec_data(NULL)` a no-op.
Fixes: 3aef54e8b8 ("diff: munmap() file contents before running external diff")
Signed-off-by: Jinoh Kang <luke1337@theori.io>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff" family of commands learned the "-I<regex>" option to
ignore hunks whose changed lines all match the given pattern.
* mk/diff-ignore-regex:
diff: add -I<regex> that ignores matching changes
merge-base, xdiff: zero out xpparam_t structures
|
|
hashmap_free(), hashmap_free_entries(), and hashmap_free_() have existed
for a while, but aren't necessarily the clearest names, especially with
hashmap_partial_clear() being added to the mix and lazy-initialization
now being supported. Peff suggested we adopt the following names[1]:
- hashmap_clear() - remove all entries and de-allocate any
hashmap-specific data, but be ready for reuse
- hashmap_clear_and_free() - ditto, but free the entries themselves
- hashmap_partial_clear() - remove all entries but don't deallocate
table
- hashmap_partial_clear_and_free() - ditto, but free the entries
This patch provides the new names and converts all existing callers over
to the new naming scheme.
[1] https://lore.kernel.org/git/20201030125059.GA3277724@coredump.intra.peff.net/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new diff option that enables ignoring changes whose all lines
(changed, removed, and added) match a given regular expression. This is
similar to the -I/--ignore-matching-lines option in standalone diff
utilities and can be used e.g. to ignore changes which only affect code
comments or to look for unrelated changes in commits containing a large
number of automatically applied modifications (e.g. a tree-wide string
replacement). The difference between -G/-S and the new -I option is
that the latter filters output on a per-change basis.
Use the 'ignore' field of xdchange_t for marking a change as ignored or
not. Since the same field is used by --ignore-blank-lines, identical
hunk emitting rules apply for --ignore-blank-lines and -I. These two
options can also be used together in the same git invocation (they are
complementary to each other).
Rename xdl_mark_ignorable() to xdl_mark_ignorable_lines(), to indicate
that it is logically a "sibling" of xdl_mark_ignorable_regex() rather
than its "parent".
Signed-off-by: Michał Kępień <michal@isc.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Only skip diffstats when both oids are valid and identical. This check
was causing both false-positives (files included in diffstats with no
actual changes (0 lines modified) and false-negatives (showing 0 lines
modified in stats when files had actually changed).
Also replaced same_contents with may_differ to avoid confusion.
Signed-off-by: Thomas Guyot-Sionnest <tguyot@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git status --short" quoted a path with SP in it when tracked, but
not those that are untracked, ignored or unmerged. They are all
shown quoted consistently.
* jc/quote-path-cleanup:
quote: turn 'nodq' parameter into a set of flags
quote: rename misnamed sq_lookup[] to cq_lookup[]
wt-status: consistently quote paths in "status --short" output
quote_path: code clarification
quote_path: optionally allow quoting a path with SP in it
quote_path: give flags parameter to quote_path()
quote_path: rename quote_path_relative() to quote_path()
|
|
quote_c_style() and its friend quote_two_c_style() both take an
optional "please omit the double quotes around the quoted body"
parameter. Turn it into a flag word, assign one bit out of it,
and call it CQUOTE_NODQ bit.
No behaviour change intended.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Yet another subcommand of "git submodule" is getting rewritten in C.
* ss/submodule-summary-in-c:
submodule: port submodule subcommand 'summary' from shell to C
t7421: introduce a test script for verifying 'summary' output
submodule: rename helper functions to avoid ambiguity
submodule: remove extra line feeds between callback struct and macro
|
|
"git diff --stat -w" showed 0-line changes for paths whose changes
were only whitespaces, which was not intuitive. We now omit such
paths from the stat output.
* mr/diff-hide-stat-wo-textual-change:
diff: teach --stat to ignore uninteresting modifications
|
|
The output from the "diff" family of the commands had abbreviated
object names of blobs involved in the patch, but its length was not
affected by the --abbrev option. Now it is.
* dd/diff-customize-index-line-abbrev:
diff: index-line: respect --abbrev in object's name
t4013: improve diff-post-processor logic
|
|
The patch-id computation did not ignore the "incomplete last line"
marker like whitespaces.
* rs/patch-id-with-incomplete-line:
patch-id: ignore newline at end of file in diff_flush_patch_id()
|
|
A handful of Git's commands respect `--abbrev' for customizing length
of abbreviation of object names.
For diff-family, Git supports 2 different options for 2 different
purposes, `--full-index' for showing diff-patch object's name in full,
and `--abbrev' to customize the length of object names in diff-raw and
diff-tree header lines, without any options to customise the length of
object names in diff-patch format. When working with diff-patch format,
we only have two options, either full index, or default abbrev length.
Although, that behaviour is documented, it doesn't stop users from
trying to use `--abbrev' with the hope of customising diff-patch's
objects' name's abbreviation.
Let's allow the blob object names shown on the "index" line to be
abbreviated to arbitrary length given via the "--abbrev" option.
To preserve backward compatibility with old script that specify both
`--full-index' and `--abbrev', always show full object id
if `--full-index' is specified.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When options such as --ignore-space-change are in use, files with
modifications can have no interesting textual changes worth showing. In
such cases, "git diff --stat" shows 0 lines of additions and deletions.
Teach "git diff --stat" not to show such a path in its output, which
would be more natural.
However, we don't want to prevent the display of all files that have 0
effective diffs since they could be the result of a rename, permission
change, or other similar operation that may still be of interest so we
special case additions and deletions as they are always interesting.
Signed-off-by: Matthew Rogers <mattr94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Whitespace is ignored when calculating patch IDs. This is done by
removing all whitespace from diff lines before hashing them, including
a newline at the end of a file. If that newline is missing, however,
diff reports that fact in a separate line containing "\ No newline at
end of file\n", and this marker is hashed like a context line.
This goes against our goal of making patch IDs independent of
whitespace. Use the same heuristic that 2485eab55cc (git-patch-id: do
not trip over "no newline" markers, 2011-02-17) added to git patch-id
instead and skip diff lines that start with a backslash and a space
and are longer than twelve characters.
Reported-by: Tilman Vogel <tilman.vogel@web.de>
Initial-test-by: Tilman Vogel <tilman.vogel@web.de>
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The helper functions: show_submodule_summary(),
prepare_submodule_summary() and print_submodule_summary() are used by
the builtin_diff() function in diff.c to generate a summary of
submodules in the context of a diff. Functions with similar names are to
be introduced in the upcoming port of submodule's summary subcommand.
So, rename the helper functions to '*_diff_submodule_summary()' to avoid
ambiguity.
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Shourya Shukla <shouryashukla.oo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "argc" and "argv" names made sense when the struct was argv_array,
but now they're just confusing. Let's rename them to "nr" (which we use
for counts elsewhere) and "v" (which is rather terse, but reads well
when combined with typical variable names like "args.v").
Note that we have to update all of the callers immediately. Playing
tricks with the preprocessor is hard here, because we wouldn't want to
rewrite unrelated tokens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We eventually want to drop the argv_array name and just use strvec
consistently. There's no particular reason we have to do it all at once,
or care about interactions between converted and unconverted bits.
Because of our preprocessor compat layer, the names are interchangeable
to the compiler (so even a definition and declaration using different
names is OK).
This patch converts remaining files from the first half of the alphabet,
to keep the diff to a manageable size.
The conversion was done purely mechanically with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe '
s/ARGV_ARRAY/STRVEC/g;
s/argv_array/strvec/g;
'
and then selectively staging files with "git add '[abcdefghjkl]*'".
We'll deal with any indentation/style fallouts separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This requires updating #include lines across the code-base, but that's
all fairly mechanical, and was done with:
git ls-files '*.c' '*.h' |
xargs perl -i -pe 's/argv-array.h/strvec.h/'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reduce memory usage during "diff --quiet" in a worktree with too
many stat-unmatched paths.
* jk/diff-memuse-optim-with-stat-unmatch:
diff: discard blob data from stat-unmatched pairs
|
|
When performing a tree-level diff against the working tree, we may find
that our index stat information is dirty, so we queue a filepair to be
examined later. If the actual content hasn't changed, we call this a
stat-unmatch; the stat information was out of date, but there's no
actual diff. Normally diffcore_std() would detect and remove these
identical filepairs via diffcore_skip_stat_unmatch(). However, when
"--quiet" is used, we want to stop the diff as soon as we see any
changes, so we check for stat-unmatches immediately in diff_change().
That check may require us to actually load the file contents into the
pair of diff_filespecs. If we find that the pair isn't a stat-unmatch,
then no big deal; we'd likely load the contents later anyway to generate
a patch, do rename detection, etc, so we want to hold on to it. But if
it is a stat-unmatch, then we have no more use for that data; the whole
point is that we're going discard the pair. However, we never free the
allocated diff_filespec data.
In most cases, keeping that data isn't a problem. We don't expect a lot
of stat-unmatch entries, and since we're using --quiet, we'd quit as
soon as we saw such a real change anyway. However, there are extreme
cases where it makes a big difference:
1. We'd generally mmap() the working tree half of the pair. And since
the OS may limit the total number of maps, we can run afoul of this
in large repositories. E.g.:
$ cd linux
$ git ls-files | wc -l
67959
$ sysctl vm.max_map_count
vm.max_map_count = 65530
$ git ls-files | xargs touch ;# everything is stat-dirty!
$ git diff --quiet
fatal: mmap failed: Cannot allocate memory
It should be unusual to have so many files stat-dirty, but it's
possible if you've just run a script like "sed -i" or similar.
After this patch, the above correctly exits with code 0.
2. Even if you don't hit mmap limits, the index half of the pair will
have been pulled from the object database into heap memory. Again
in a clone of linux.git, running:
$ git ls-files | head -n 10000 | xargs touch
$ git diff --quiet
peaks at 145MB heap before this patch, and 94MB after.
This patch solves the problem by freeing any diff_filespec data we
picked up during the "--quiet" stat-unmatch check in diff_changes.
Nobody is going to need that data later, so there's no point holding on
to it. There are a few things to note:
- we could skip queueing the pair entirely, which could in theory save
a little work. But there's not much to save, as we need a
diff_filepair to feed to diff_filespec_check_stat_unmatch() anyway.
And since we cache the result of the stat-unmatch checks, a later
call to diffcore_skip_stat_unmatch() call will quickly skip over
them. The diffcore code also counts up the number of stat-unmatched
pairs as it removes them. It's doubtful any callers would care about
that in combination with --quiet, but we'd have to reimplement the
logic here to be on the safe side. So it's not really worth the
trouble.
- I didn't write a test, because we always produce the correct output
unless we run up against system mmap limits, which are both
unportable and expensive to test against. Measuring peak heap
would be interesting, but our perf suite isn't yet capable of that.
- note that diff without "--quiet" does not suffer from the same
problem. In diffcore_skip_stat_unmatch(), we detect the stat-unmatch
entries and drop them immediately, so we're not carrying their data
around.
- you _can_ still trigger the mmap limit problem if you truly have
that many files with actual changes. But it's rather unlikely. The
stat-unmatch check avoids loading the file contents if the sizes
don't match, so you'd need a pretty trivial change in every single
file. Likewise, inexact rename detection might load the data for
many files all at once. But you'd need not just 64k changes, but
that many deletions and additions. The most likely candidate is
perhaps break-detection, which would load the data for all pairs and
keep it around for the content-level diff. But again, you'd need 64k
actually changed files in the first place.
So it's still possible to trigger this case, but it seems like "I
accidentally made all my files stat-dirty" is the most likely case
in the real world.
Reported-by: Jan Christoph Uhde <Jan@UhdeJc.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `diff.relative` boolean option set to `true` shows only changes in
the current directory/value specified by the `path` argument of the
`relative` option and shows pathnames relative to the aforementioned
directory.
Teach `--no-relative` to override earlier `--relative`
Add for git-format-patch(1) options documentation `--relative` and
`--no-relative`
Signed-off-by: Laurent Arnoud <laurent@spkdev.net>
Acked-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git diff" in a partial clone learned to avoid lazy loading blob
objects in more casese when they are not needed.
* jt/avoid-prefetch-when-able-in-diff:
diff: restrict when prefetching occurs
diff: refactor object read
diff: make diff_populate_filespec_options struct
promisor-remote: accept 0 as oid_nr in function
|
|
Commit 7fbbcb21b1 ("diff: batch fetching of missing blobs", 2019-04-08)
optimized "diff" by prefetching blobs in a partial clone, but there are
some cases wherein blobs do not need to be prefetched. In these cases,
any command that uses the diff machinery will unnecessarily fetch blobs.
diffcore_std() may read blobs when it calls the following functions:
(1) diffcore_skip_stat_unmatch() (controlled by the config variable
diff.autorefreshindex)
(2) diffcore_break() and diffcore_merge_broken() (for break-rewrite
detection)
(3) diffcore_rename() (for rename detection)
(4) diffcore_pickaxe() (for detecting addition/deletion of specified
string)
Instead of always prefetching blobs, teach diffcore_skip_stat_unmatch(),
diffcore_break(), and diffcore_rename() to prefetch blobs upon the first
read of a missing object. This covers (1), (2), and (3): to cover the
rest, teach diffcore_std() to prefetch if the output type is one that
includes blob data (and hence blob data will be required later anyway),
or if it knows that (4) will be run.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Refactor the object reads in diff_populate_filespec() to have the first
object read not be in an if/else branch, because in a future patch, a
retry will be added to that first object read.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The behavior of diff_populate_filespec() currently can be customized
through a bitflag, but a subsequent patch requires it to support a
non-boolean option. Replace the bitflag with an options struct.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are 3 callers to promisor_remote_get_direct() that first check if
the number of objects to be fetched is equal to 0. Fold that check into
promisor_remote_get_direct(), and in doing so, be explicit as to what
promisor_remote_get_direct() does if oid_nr is 0 (it returns 0, success,
immediately).
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that we have the codebase wired up to pass any additional metadata
to filters, let's collect the additional metadata that we'd like to
pass.
The two main places we pass this metadata are checkouts and archives.
In these two situations, reading HEAD isn't a valid option, since HEAD
isn't updated for checkouts until after the working tree is written and
archives can accept an arbitrary tree. In other situations, HEAD will
usually reflect the refname of the branch in current use.
We pass a smaller amount of data in other cases, such as git cat-file,
where we can really only logically know about the blob.
This commit updates only the parts of the checkout code where we don't
use unpack_trees. That function and callers of it will be handled in a
future commit.
In the archive code, we leak a small amount of memory, since nothing we
pass in the archiver argument structure is freed.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are a variety of situations where a filter process can make use of
some additional metadata. For example, some people find the ident
filter too limiting and would like to include the commit or the branch
in their smudged files. This information isn't available during
checkout as HEAD hasn't been updated at that point, and it wouldn't be
available in archives either.
Let's add a way to pass this metadata down to the filter. We pass the
blob we're operating on, the treeish (preferring the commit over the
tree if one exists), and the ref we're operating on. Note that we won't
pass this information in all cases, such as when renormalizing or when
we're performing diffs, since it doesn't make sense in those cases.
The data we currently get from the filter process looks like the
following:
command=smudge
pathname=git.c
0000
With this change, we'll get data more like this:
command=smudge
pathname=git.c
refname=refs/tags/v2.25.1
treeish=c522f061d551c9bb8684a7c3859b2ece4499b56b
blob=7be7ad34bd053884ec48923706e70c81719a8660
0000
There are a couple things to note about this approach. For operations
like checkout, treeish will always be a commit, since we cannot check
out individual trees, but for other operations, like archive, we can end
up operating on only a particular tree, so we'll provide only a tree as
the treeish. Similar comments apply for refname, since there are a
variety of cases in which we won't have a ref.
This commit wires up the code to print this information, but doesn't
pass any of it at this point. In a future commit, we'll have various
code paths pass the actual useful data down.
Signed-off-by: brian m. carlson <bk2204@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some codepaths were given a repository instance as a parameter to
work in the repository, but passed the_repository instance to its
callees, which has been cleaned up (somewhat).
* mt/use-passed-repo-more-in-funcs:
sha1-file: allow check_object_signature() to handle any repo
sha1-file: pass git_hash_algo to hash_object_file()
sha1-file: pass git_hash_algo to write_object_file_prepare()
streaming: allow open_istream() to handle any repo
pack-check: use given repo's hash_algo at verify_packfile()
cache-tree: use given repo's hash_algo at verify_one()
diff: make diff_populate_filespec() honor its repo argument
|
|
We parse diff.wsErrorHighlight in git_diff_ui_config(), meaning that it
doesn't take effect for plumbing commands, only for porcelains like
git-diff itself. This is mildly annoying as it means scripts like
add--interactive, which produce a user-visible diff with color, don't
respect the option.
We could teach that script to parse the config and pass it along as
--ws-error-highlight to the diff plumbing. But there's a simpler
solution.
It should be reasonably safe for plumbing to respect this option, as it
only kicks in when color is otherwise enabled. And anybody parsing
colorized output must already deal with the fact that color.diff.* may
change the exact output they see; those options have been part of
git_diff_basic_config() since its inception in 9a1805a872 (add a "basic"
diff config callback, 2008-01-04).
So we can just move it to the "basic" config, which fixes
add--interactive, along with any other script in the same boat, with a
very low risk of hurting any plumbing users.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
diff_populate_filespec() takes a struct repository argument but it
doesn't get passed down to read_object_file().
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The beginning of rewriting "git add -i" in C.
* js/builtin-add-i:
built-in add -i: implement the `help` command
built-in add -i: use color in the main loop
built-in add -i: support `?` (prompt help)
built-in add -i: show unique prefixes of the commands
built-in add -i: implement the main loop
built-in add -i: color the header in the `status` command
built-in add -i: implement the `status` command
diff: export diffstat interface
Start to implement a built-in version of `git add --interactive`
|
|
Make the diffstat interface (namely, the diffstat_t struct and
compute_diffstat) no longer be internal to diff.c and allow it to be used
by other parts of git.
This is helpful for code that may want to easily extract information
from files using the diff machinery, while flushing it differently from
how the show_* functions used by diff_flush() do it. One example is the
builtin implementation of git-add--interactive's status.
Signed-off-by: Daniel Ferreira <bnmvco@gmail.com>
Signed-off-by: Slavica Đukić <slawica92@hotmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reported-by: Jens Schleusener <Jens.Schleusener@fossies.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up of the hashmap API, both users and implementation.
* ew/hashmap:
hashmap_entry: remove first member requirement from docs
hashmap: remove type arg from hashmap_{get,put,remove}_entry
OFFSETOF_VAR macro to simplify hashmap iterators
hashmap: introduce hashmap_free_entries
hashmap: hashmap_{put,remove} return hashmap_entry *
hashmap: use *_entry APIs for iteration
hashmap_cmp_fn takes hashmap_entry params
hashmap_get{,_from_hash} return "struct hashmap_entry *"
hashmap: use *_entry APIs to wrap container_of
hashmap_get_next returns "struct hashmap_entry *"
introduce container_of macro
hashmap_put takes "struct hashmap_entry *"
hashmap_remove takes "const struct hashmap_entry *"
hashmap_get takes "const struct hashmap_entry *"
hashmap_add takes "struct hashmap_entry *"
hashmap_get_next takes "const struct hashmap_entry *"
hashmap_entry_init takes "struct hashmap_entry *"
packfile: use hashmap_entry in delta_base_cache_entry
coccicheck: detect hashmap_entry.hash assignment
diff: use hashmap_entry_init on moved_entry.ent
|
|
Preparation for SHA-256 upgrade continues.
* bc/object-id-part17: (26 commits)
midx: switch to using the_hash_algo
builtin/show-index: replace sha1_to_hex
rerere: replace sha1_to_hex
builtin/receive-pack: replace sha1_to_hex
builtin/index-pack: replace sha1_to_hex
packfile: replace sha1_to_hex
wt-status: convert struct wt_status to object_id
cache: remove null_sha1
builtin/worktree: switch null_sha1 to null_oid
builtin/repack: write object IDs of the proper length
pack-write: use hash_to_hex when writing checksums
sequencer: convert to use the_hash_algo
bisect: switch to using the_hash_algo
sha1-lookup: switch hard-coded constants to the_hash_algo
config: use the_hash_algo in abbrev comparison
combine-diff: replace GIT_SHA1_HEXSZ with the_hash_algo
bundle: switch to use the_hash_algo
connected: switch GIT_SHA1_HEXSZ to the_hash_algo
show-index: switch hard-coded constants to the_hash_algo
blame: remove needless comparison with GIT_SHA1_HEXSZ
...
|
|
Since these macros already take a `keyvar' pointer of a known type,
we can rely on OFFSETOF_VAR to get the correct offset without
relying on non-portable `__typeof__' and `offsetof'.
Argument order is also rearranged, so `keyvar' and `member' are
sequential as they are used as: `keyvar->member'
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While we cannot rely on a `__typeof__' operator being portable
to use with `offsetof'; we can calculate the pointer offset
using an existing pointer and the address of a member using
pointer arithmetic for compilers without `__typeof__'.
This allows us to simplify usage of hashmap iterator macros
by not having to specify a type when a pointer of that type
is already given.
In the future, list iterator macros (e.g. list_for_each_entry)
may also be implemented using OFFSETOF_VAR to save hackers the
trouble of using container_of/list_entry macros and without
relying on non-portable `__typeof__'.
v3: use `__typeof__' to avoid clang warnings
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`hashmap_free_entries' behaves like `container_of' and passes
the offset of the hashmap_entry struct to the internal
`hashmap_free_' function, allowing the function to free any
struct pointer regardless of where the hashmap_entry field
is located.
`hashmap_free' no longer takes any arguments aside from
the hashmap itself.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Another step in eliminating the requirement of hashmap_entry
being the first member of a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using `container_of' can be verbose and choosing names for
intermediate "struct hashmap_entry" pointers is a hard problem.
So introduce "*_entry" APIs inspired by similar linked-list
APIs in the Linux kernel.
Unfortunately, `__typeof__' is not portable C, so we need an
extra parameter to specify the type.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is a step towards removing the requirement for
hashmap_entry being the first field of a struct.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is less error-prone than "const void *" as the compiler
now detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is less error-prone than "void *" as the compiler now
detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is less error-prone than "const void *" as the compiler
now detects invalid types being passed.
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Otherwise, the hashmap_entry.next field appears to remain
uninitialized, which can lead to problems when
add_lines_to_move_detection calls hashmap_add.
I found this through manual inspection when converting
hashmap_add callers to take "struct hashmap_entry *".
Signed-off-by: Eric Wong <e@80x24.org>
Reviewed-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach the lazy clone machinery that there can be more than one
promisor remote and consult them in order when downloading missing
objects on demand.
* cc/multi-promisor:
Move core_partial_clone_filter_default to promisor-remote.c
Move repository_format_partial_clone to promisor-remote.c
Remove fetch-object.{c,h} in favor of promisor-remote.{c,h}
remote: add promisor and partial clone config to the doc
partial-clone: add multiple remotes in the doc
t0410: test fetching from many promisor remotes
builtin/fetch: remove unique promisor remote limitation
promisor-remote: parse remote.*.partialclonefilter
Use promisor_remote_get_direct() and has_promisor_remote()
promisor-remote: use repository_format_partial_clone
promisor-remote: add promisor_remote_reinit()
promisor-remote: implement promisor_remote_get_direct()
Add initial support for many promisor remotes
fetch-object: make functions return an error code
t0410: remove pipes after git commands
|
|
On-demand object fetching in lazy clone incorrectly tried to fetch
commits from submodule projects, while still working in the
superproject, which has been corrected.
* jt/diff-lazy-fetch-submodule-fix:
diff: skip GITLINK when lazy fetching missing objs
|
|
In 7fbbcb21b1 ("diff: batch fetching of missing blobs", 2019-04-08),
diff was taught to batch the fetching of missing objects when operating
on a partial clone, but was not taught to refrain from fetching
GITLINKs. Teach diff to check if an object is a GITLINK before including
it in the set to be fetched.
(As stated in the commit message of that commit, unpack-trees was also
taught a similar thing prior, but unpack-trees correctly checks for
GITLINK before including objects in the set to be fetched.)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the two separate patch-id implementations to use the_hash_algo
in their implementation.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Windows update.
* js/unmap-before-ext-diff:
diff: munmap() file contents before running external diff
|
|
Windows update.
* js/unmap-before-ext-diff:
diff: munmap() file contents before running external diff
|
|
The line count in the outer diff's hunk headers of a range diff is not
all that interesting. It merely shows how far along the inner diff
are on both sides. That number is of no use for human readers, and
range-diffs are not meant to be machine readable.
In a subsequent commit we're going to add some more contextual
information such as the filename corresponding to the diff to the hunk
headers. Remove the unnecessary information, and just keep the "@@"
to indicate that a new hunk of the outer diff is starting.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When running an external diff from, say, a diff tool, it is safe to
assume that we want to write the files in question. On Windows, that
means that there cannot be any other process holding an open handle to
said files, or even just a mapped region.
So let's make sure that `git diff` itself is not holding any open handle
to the files in question.
In fact, we will just release the file pair right away, as the external
diff uses the files we just wrote, so we do not need to hold the file
contents in memory anymore.
This fixes https://github.com/git-for-windows/git/issues/1315
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of using the repository_format_partial_clone global
and fetch_objects() directly, let's use has_promisor_remote()
and promisor_remote_get_direct().
This way all the configured promisor remotes will be taken
into account, not only the one specified by
extensions.partialClone.
Also when cloning or fetching using a partial clone filter,
remote.origin.promisor will be set to "true" instead of
setting extensions.partialClone to "origin". This makes it
possible to use many promisor remote just by fetching from
them.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "--base" option of "format-patch" computed the patch-ids for
prerequisite patches in an unstable way, which has been updated to
compute in a way that is compatible with "git patch-id --stable".
* sb/format-patch-base-patch-id-fix:
format-patch: make --base patch-id output stable
format-patch: inform user that patch-id generation is unstable
|
|
Fix two typos introduced by the following commits:
+ 31fba9d3b4 (diff-parseopt: convert --[src|dst]-prefix, 2019-03-24)
+ ed8b4132c8 (remote-curl: mark all error messages for translation,
2019-03-05)
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Typofix.
* ja/diff-opt-typofix:
diff: fix mistake in translatable strings
|
|
A brown-paper-bag bugfix to a change already in 'master'.
* nd/diff-parseopt:
parse-options: check empty value in OPT_INTEGER and OPT_ABBREV
diff-parseopt: restore -U (no argument) behavior
diff-parseopt: correct variable types that are used by parseopt
|
|
Before d473e2e0e8 (diff.c: convert -U|--unified, 2019-01-27), -U and
--unified are implemented with a custom parser opt_arg() in diff.c. I
didn't check this code carefully and not realize that it's the
equivalent of PARSE_OPT_NONEG | PARSE_OPT_OPTARG.
In other words, if -U is specified without any argument, the option
should be accepted, and the default value should be used. Without
PARSE_OPT_OPTARG, parse_options() will reject this case and cause a
regression.
Reported-by: Bryan Turner <bturner@atlassian.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Jean-Noël Avila <jn.avila@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We weren't flushing the context each time we processed a hunk in the
patch-id generation code in diff.c, but we were doing that when we
generated "stable" patch-ids with the 'patch-id' tool. Let's port that
similar logic over from patch-id.c into diff.c so we can get the same
hash when we're generating patch-ids for 'format-patch --base=' types of
command invocations.
Cc: Xiaolong Ye <xiaolong.ye@intel.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While running "git diff" in a lazy clone, we can upfront know which
missing blobs we will need, instead of waiting for the on-demand
machinery to discover them one by one. Aim to achieve better
performance by batching the request for these promised blobs.
* jt/batch-fetch-blobs-in-diff:
diff: batch fetching of missing blobs
sha1-file: support OBJECT_INFO_FOR_PREFETCH
|
|
Fourth batch to teach the diff machinery to use the parse-options
API.
* nd/diff-parseopt-4:
am: avoid diff_opt_parse()
diff --no-index: use parse_options() instead of diff_opt_parse()
range-diff: use parse_options() instead of diff_opt_parse()
diff.c: allow --no-color-moved-ws
diff-parseopt: convert --color-moved-ws
diff-parseopt: convert --[no-]color-moved
diff-parseopt: convert --inter-hunk-context
diff-parseopt: convert --no-prefix
diff-parseopt: convert --line-prefix
diff-parseopt: convert --[src|dst]-prefix
diff-parseopt: convert --[no-]abbrev
diff-parseopt: convert --diff-filter
diff-parseopt: convert --find-object
diff-parseopt: convert -O
diff-parseopt: convert --pickaxe-all|--pickaxe-regex
diff-parseopt: convert -S|-G
diff-parseopt: convert -l
diff-parseopt: convert -z
diff-parseopt: convert --ita-[in]visible-in-index
diff-parseopt: convert --ws-error-highlight
|
|
Third batch to teach the diff machinery to use the parse-options
API.
* nd/diff-parseopt-3:
diff-parseopt: convert --submodule
diff-parseopt: convert --ignore-submodules
diff-parseopt: convert --textconv
diff-parseopt: convert --ext-diff
diff-parseopt: convert --quiet
diff-parseopt: convert --exit-code
diff-parseopt: convert --color-words
diff-parseopt: convert --word-diff-regex
diff-parseopt: convert --word-diff
diff-parseopt: convert --[no-]color
diff-parseopt: convert --[no-]follow
diff-parseopt: convert -R
diff-parseopt: convert -a|--text
diff-parseopt: convert --full-index
diff-parseopt: convert --binary
diff-parseopt: convert --anchored
diff-parseopt: convert --diff-algorithm
diff-parseopt: convert --histogram
diff-parseopt: convert --patience
diff-parseopt: convert --[no-]indent-heuristic
|
|
When running a command like "git show" or "git diff" in a partial clone,
batch all missing blobs to be fetched as one request.
This is similar to c0c578b33c ("unpack-trees: batch fetching of missing
blobs", 2017-12-08), but for another command.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
diff_opt_parse() is a heavy hammer to just set diff filter. But it's
the only way because of the diff_status_letters[] mapping. Add a new
API to set diff filter and use it in git-am. diff_opt_parse()'s only
remaining call site in revision.c will be gone soon and having it here
just because of git-am does not make sense.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This option is added in commit b73bcbac4a (diff: allow
--no-color-moved-ws - 2018-11-23) in pw/diff-color-moved-ws-fix. To ease
merge conflict resolution, re-implement the option handling here so that
the conflict could be resolved by taking this side of change.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark one more string for translation while at there
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
OPT__ABBREV() has the same behavior as the deleted code with one
difference: it does check for valid number and error out if not. And the
'40' change is self explanatory.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While at it, mark one more string for translation
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While at it, mark one more string for translation.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark one more string for translation while at there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Second batch to teach the diff machinery to use the parse-options
API.
* nd/diff-parseopt-2: (21 commits)
diff-parseopt: convert --ignore-some-changes
diff-parseopt: convert --[no-]minimal
diff-parseopt: convert --relative
diff-parseopt: convert --no-renames|--[no--rename-empty
diff-parseopt: convert --find-copies-harder
diff-parseopt: convert -C|--find-copies
diff-parseopt: convert -D|--irreversible-delete
diff-parseopt: convert -M|--find-renames
diff-parseopt: convert -B|--break-rewrites
diff-parseopt: convert --output-*
diff-parseopt: convert --[no-]compact-summary
diff-parseopt: convert --stat*
diff-parseopt: convert -s|--no-patch
diff-parseopt: convert --name-status
diff-parseopt: convert --name-only
diff-parseopt: convert --patch-with-stat
diff-parseopt: convert --summary
diff-parseopt: convert --check
diff-parseopt: convert --dirstat and friends
diff-parseopt: convert --numstat and --shortstat
...
|
|
The command line completion (in contrib/) has been taught to
complete more subcommand parameters.
* nd/completion-more-parameters:
completion: add more parameter value completion
|
|
Code clean-up.
* jk/unused-params:
ref-filter: drop unused "sz" parameters
ref-filter: drop unused "obj" parameters
ref-filter: drop unused buf/sz pairs
files-backend: drop refs parameter from split_symref_update()
pack-objects: drop unused parameter from oe_map_new_pack()
merge-recursive: drop several unused parameters
diff: drop complete_rewrite parameter from run_external_diff()
diff: drop unused emit data parameter from sane_truncate_line()
diff: drop unused color reset parameters
diff: drop options parameter from diffcore_fix_diff_index()
|
|
The diff machinery, one of the oldest parts of the system, which
long predates the parse-options API, uses fairly long and complex
handcrafted option parser. This is being rewritten to use the
parse-options API.
* nd/diff-parseopt:
diff.c: convert --raw
diff.c: convert -W|--[no-]function-context
diff.c: convert -U|--unified
diff.c: convert -u|-p|--patch
diff.c: prepare to use parse_options() for parsing
diff.h: avoid bit fields in struct diff_flags
diff.h: keep forward struct declarations sorted
parse-options: allow ll_callback with OPTION_CALLBACK
parse-options: avoid magic return codes
parse-options: stop abusing 'callback' for lowlevel callbacks
parse-options: add OPT_BITOP()
parse-options: disable option abbreviation with PARSE_OPT_KEEP_UNKNOWN
parse-options: add one-shot mode
parse-options.h: remove extern on function prototypes
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
For --rename-empty, see 90d43b0768 (teach diffcore-rename to
optionally ignore empty content - 2012-03-22) for more information.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
--no-find-copies-harder is also added on purpose (because I don't see
why we should not have the --no- version for this)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This also validates that the user specifies a single character in
--output-indicator-*, not a string.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This adds value completion for a couple more paramters. To make it
easier to maintain these hard coded lists, add a comment at the original
list/code to remind people to update git-completion.bash too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our builtin_diff() wants to know whether break-detection found a
complete rewrite, because it changes how the diff is shown. However,
when calling out to an external diff, we don't pass this information
along (and doing so would require designing a new interface to the
user-provided program).
Let's drop the unused parameter to make this fact more clear.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We pass the "struct emit_callback" (which contains all of the context
for our diff) into sane_truncate_line(), but that function doesn't
actually use it. In theory we might eventually develop a diff option
that impacts this, but in the meantime let's not mislead anybody reading
the code. Since the function is static, it would be easy to pass it
again if it should ever become useful.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several of the emit_* functions take a "reset" color parameter, but
never actually look at it (instead, they call into emit_diff_symbol,
which handles the colors itself). Let's drop these unused parameters.
Note that emit_line() does still take a color/reset pair, and actually
uses it. It cannot be refactored to match these other functions because
it's the thing that emit_diff_symbol eventually calls into (i.e., it
does not by itself know which colors to use, and must be told by the
caller).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
