| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Code clean-up.
* jk/loose-object-cache-oid:
prefer "hash mismatch" to "sha1 mismatch"
sha1-file: avoid "sha1 file" for generic use in messages
sha1-file: prefer "loose object file" to "sha1 file" in messages
sha1-file: drop has_sha1_file()
convert has_sha1_file() callers to has_object_file()
sha1-file: convert pass-through functions to object_id
sha1-file: modernize loose header/stream functions
sha1-file: modernize loose object file functions
http: use struct object_id instead of bare sha1
update comment references to sha1_object_info()
sha1-file: fix outdated sha1 comment references
|
|
The only remaining callers of has_sha1_file() actually have an object_id
already. They can use the "object" variant, rather than dereferencing
the hash themselves.
The code changes here were completely generated by the included
coccinelle patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the Git pack protocol definition, an error packet may appear only in
a certain context. However, servers can face a runtime error (e.g. I/O
error) at an arbitrary timing. This patch changes the protocol to allow
an error packet to be sent instead of any packet.
Without this protocol spec change, when a server cannot process a
request, there's no way to tell that to a client. Since the server
cannot produce a valid response, it would be forced to cut a connection
without telling why. With this protocol spec change, the server can be
more gentle in this situation. An old client may see these error packets
as an unexpected packet, but this is not worse than having an unexpected
EOF.
Following this protocol spec change, the error packet handling code is
moved to pkt-line.c. Implementation wise, this implementation uses
pkt-line to communicate with a subprocess. Since this is not a part of
Git protocol, it's possible that a packet that is not supposed to be an
error packet is mistakenly parsed as an error packet. This error packet
handling is enabled only for the Git pack protocol parsing code
considering this.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By using and sharing a packet_reader while handling a Git pack protocol
request, the same reader option is used throughout the code. This makes
it easy to set a reader option to the request parsing code.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On systems that do not support multithread, start_async() is
implemented with fork(). This implementation details unfortunately
leak out at least in send-pack.c [1].
To keep the code base clean of NO_PTHREADS, move the this #ifdef back
to run-command.c. The new wrapper function async_with_fork() at least
helps suggest that this special "close()" is related to async in fork
mode.
[1] 09c9957cf7 (send-pack: avoid deadlock when pack-object dies early
- 2011-04-25)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a repository argument to allow callers of is_repository_shallow
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This should make these functions easier to find and cache.h less
overwhelming to read.
In particular, this moves:
- read_object_file
- oid_object_info
- write_object_file
As a result, most of the codebase needs to #include object-store.h.
In this patch the #include is only added to files that would fail to
compile otherwise. It would be better to #include wherever
identifiers from the header are used. That can happen later
when we have better tooling for it.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert the remaining function, feed_object, to use struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The packet_read_line() function will die if it sees any
protocol or socket errors. But it will return NULL for a
flush packet; some callers which are not expecting this may
dereference NULL if they get an unexpected flush. This would
involve the other side breaking protocol, but we should
flag the error rather than segfault.
Signed-off-by: Jon Simons <jon@jonsimons.org>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Avoid a magic number of NULL placeholder values and a magic index by
constructing the command line for pack-objects using the embedded
argv_array of the child_process. The resulting code is shorter and
easier to extend.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gcc 7 adds -Wimplicit-fallthrough, which can warn when a
switch case falls through to the next case. The general idea
is that the compiler can't tell if this was intentional or
not, so you should annotate any intentional fall-throughs as
such, leaving it to complain about any unannotated ones.
There's a GNU __attribute__ which can be used for
annotation, but of course we'd have to #ifdef it away on
non-gcc compilers. Gcc will also recognize
specially-formatted comments, which matches our current
practice. Let's extend that practice to all of the
unannotated sites (which I did look over and verify that
they were behaving as intended).
Ideally in each case we'd actually give some reasons in the
comment about why we're falling through, or what we're
falling through to. And gcc does support that with
-Wimplicit-fallthrough=2, which relaxes the comment pattern
matching to anything that contains "fallthrough" (or a
variety of spelling variants). However, this isn't the
default for -Wimplicit-fallthrough, nor for -Wextra. In the
name of simplicity, it's probably better for us to support
the default level, which requires "fallthrough" to be the
only thing in the comment (modulo some window dressing like
"else" and some punctuation; see the gcc manual for the
complete set of patterns).
This patch suppresses all warnings due to
-Wimplicit-fallthrough. We might eventually want to add that
to the DEVELOPER Makefile knob, but we should probably wait
until gcc 7 is more widely adopted (since earlier versions
will complain about the unknown warning type).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Conversion from unsigned char [40] to struct object_id continues.
* bc/object-id:
Documentation: update and rename api-sha1-array.txt
Rename sha1_array to oid_array
Convert sha1_array_for_each_unique and for_each_abbrev to object_id
Convert sha1_array_lookup to take struct object_id
Convert remaining callers of sha1_array_lookup to object_id
Make sha1_array_append take a struct object_id *
sha1-array: convert internal storage for struct sha1_array to object_id
builtin/pull: convert to struct object_id
submodule: convert check_for_new_submodule_commits to object_id
sha1_name: convert disambiguate_hint_fn to take object_id
sha1_name: convert struct disambiguate_state to object_id
test-sha1-array: convert most code to struct object_id
parse-options-cb: convert sha1_array_append caller to struct object_id
fsck: convert init_skiplist to struct object_id
builtin/receive-pack: convert portions to struct object_id
builtin/pull: convert portions to struct object_id
builtin/diff: convert to struct object_id
Convert GIT_SHA1_RAWSZ used for allocation to GIT_MAX_RAWSZ
Convert GIT_SHA1_HEXSZ used for allocation to GIT_MAX_HEXSZ
Define new hash-size constants for allocating memory
|
|
Since this structure handles an array of object IDs, rename it to struct
oid_array. Also rename the accessor functions and the initialization
constant.
This commit was produced mechanically by providing non-Documentation
files to the following Perl one-liners:
perl -pi -E 's/struct sha1_array/struct oid_array/g'
perl -pi -E 's/\bsha1_array_/oid_array_/g'
perl -pi -E 's/SHA1_ARRAY_INIT/OID_ARRAY_INIT/g'
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the internal storage for struct sha1_array use an array of struct
object_id internally. Update the users of this struct which inspect its
internals.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recently we started passing the "--push-options" through the
external remote helper interface; now the "smart HTTP" remote
helper understands what to do with the passed information.
* sb/push-options-via-transport:
remote-curl: allow push options
send-pack: send push options correctly in stateless-rpc case
|
|
"git send-pack --stateless-rpc" puts each request in a sequence of pkt-lines
followed by a flush-pkt. The push option code forgot about this and sends push
options and their terminating delimiter as ordinary pkt-lines that get their
length header stripped off by remote-curl before being sent to the server.
The result is multiple malformed requests, which the server rejects.
Fortunately send-pack --stateless-rpc already is aware of this "pkt-line within
pkt-line" framing for the update commands that precede push options. Handle
push options the same way.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Brandon Williams <bmwill@google.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If our pack-objects sub-process dies of a signal, then it
likely didn't have a chance to write anything useful to
stderr. The user may be left scratching their head why the
push failed. Let's detect this situation and write something
to stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the local pack-objects of a push fails, we'll tell the
user about it. But one likely cause is that the remote
index-pack stopped reading for some reason (because it
didn't like our input, or encountered another error). In
that case we'd expect the remote to report more details to
us via the "unpack ..." status line. However, the current
code just hangs up completely, and the user never sees it.
Instead, let's call receive_unpack_status(), which will
complain on stderr with whatever reason the remote told us.
Note that if our pack-objects fails because the connection
was severed or the remote just crashed entirely, then our
packet_read_line() call may fail with "the remote end hung
up unexpectedly". That's OK. It's a more accurate
description than what we get now (which is just "some refs
failed to push").
This should be safe from any deadlocks. At the point we make
this call we'll have closed the writing end of the
connection to the server (either by handing it off to
a pack-objects which exited, explicitly in the stateless_rpc
case, or by doing a half-duplex shutdown for a socket). So
there should be no chance that the other side is waiting
for the rest of our pack-objects input.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the remote tells us that the "unpack" step failed, we
show an error message. However, unless you are familiar with
the internals of send-pack and receive-pack, it was not
clear that this represented an error on the remote side.
Let's re-word to make that more obvious.
Likewise, when we got an unexpected packet from the other
end, we complained with a vague message but did not actually
show the packet. Let's fix that.
And finally, neither message was marked for translation. The
message from the remote probably won't be translated, but
there's no reason we can't do better for the local half.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This avoids repeating ourselves, and the use of magic
numbers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After sending the pack, we call receive_status() which gets
both the "unpack" line and the ref status. Let's break these
into two functions so we can call the first part
independently.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
d64ea0f83b ("git-compat-util: add xstrdup_or_null helper",
2015-01-12) added a handy wrapper that allows us to get a duplicate
of a string or NULL if the original is NULL, but a handful of
codepath predate its introduction or just weren't aware of it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* rs/use-strbuf-addstr:
use strbuf_addstr() instead of strbuf_addf() with "%s"
use strbuf_addstr() for adding constant strings to a strbuf
|
|
Replace uses of strbuf_addf() for adding strings with more lightweight
strbuf_addstr() calls.
In http-push.c it becomes easier to see what's going on without having
to verfiy that the definition of PROPFIND_ALL_REQUEST doesn't contain
any format specifiers.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This implements everything that is required on the client side to make use
of push options from the porcelain push command.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We start a pack-objects process and then write all of the
positive and negative sha1s to it over a pipe. We do so by
formatting each item into a fixed-size buffer and then
writing each individually. This has two drawbacks:
1. There's some manual computation of the buffer size,
which is not immediately obvious is correct (though it
is).
2. We write() once per sha1, which means a lot more system
calls than are necessary.
We can solve both by wrapping the pipe descriptor in a stdio
handle; this is the same technique used by upload-pack when
serving fetches.
Note that we can also simplify and improve the error
handling here. The original detected a single write error
and broke out of the loop (presumably to avoid writing the
error message over and over), but never actually acted on
seeing an error; we just fed truncated input and took
whatever pack-objects returned.
In practice, this probably didn't matter, as the likely
errors would be caused by pack-objects dying (and we'd
probably just die with SIGPIPE anyway). But we can easily
make this simpler and more robust; the stdio handle keeps an
error flag, which we can check at the end.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we get an error from pack-objects, we may exit
send_pack() early, before reading the server's status
response. In such a case, we may racily see SIGPIPE from our
async demuxer (which is trying to write that status back to
us), and we'd prefer to continue pushing the error up the
call stack, rather than taking down the whole process with
signal death.
This is safe to do because our demuxer just calls
recv_sideband, whose data writes are all done with
write_or_die(), which will notice SIGPIPE.
We do also write sideband 2 to stderr, and we would no
longer die on SIGPIPE there (if it were piped in the first
place, and if the piped program went away). But that's
probably a good thing, as it likewise should not abort the
push process at all (neither immediately by signal, nor
eventually by reporting failure back to the main thread).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This fixes a deadlock on the client side when pushing a
large number of refs from a corrupted repo. There's a
reproduction script below, but let's start with a
human-readable explanation.
The client side of a push goes something like this:
1. Start an async process to demux sideband coming from
the server.
2. Run pack-objects to send the actual pack, and wait for
its status via finish_command().
3. If pack-objects failed, abort immediately.
4. If pack-objects succeeded, read the per-ref status from
the server, which is actually coming over a pipe from
the demux process started in step 1.
We run finish_async() to wait for and clean up the demux
process in two places. In step 3, if we see an error, we
want it to end early. And after step 4, it should be done
writing any data and we are just cleaning it up.
Let's focus on the error case first. We hand the output
descriptor to the server over to pack-objects. So by the
time it has returned an error to us, it has closed the
descriptor and the server has gotten EOF. The server will
mark all refs as failed with "unpacker error" and send us
back the status for each (followed by EOF).
This status goes to the demuxer thread, which relays it over
a pipe to the main thread. But the main thread never even
tries reading the status. It's trying to bail because of the
pack-objects error, and is waiting for the demuxer thread to
finish. If there are a small number of refs, that's OK; the
demuxer thread writes into the pipe buffer, sees EOF from
the server, and quits. But if there are a large number of
refs, it may block on write() back to the main thread,
leading to a deadlock (the main thread is waiting for the
demuxer to finish, the demuxer is waiting for the main
thread to read).
We can break this deadlock by closing the pipe between the
demuxer and the main thread before calling finish_async().
Then the demuxer gets a write() error and exits.
The non-error case usually just works, because we will have
read all of the data from the other side. We do close
demux.out already, but we only do so _after_ calling
finish_async(). This is OK because there shouldn't be any
more data coming from the server. But technically we've only
read to a flush packet, and a broken or malicious server
could be sending more cruft. In such a case, we would hit
the same deadlock. Closing the pipe first doesn't affect the
normal case, and means that for a cruft-sending server,
we'll notice a write() error rather than deadlocking.
Note that when write() sees this error, we'll actually
deliver SIGPIPE to the thread, which will take down the
whole process (unless we're compiled with NO_PTHREADS). This
isn't ideal, but it's an improvement over the status quo,
which is deadlocking. And SIGPIPE handling in async threads
is a bigger problem that we can deal with separately.
A simple reproduction for the error case is below. It's
technically racy (we could exit the main process and take
down the async thread with us before it even reads the
status), though in practice it seems to fail pretty
consistently.
git init repo &&
cd repo &&
# make some commits; we need two so we can simulate corruption
# in the history later.
git commit --allow-empty -m one &&
one=$(git rev-parse HEAD) &&
git commit --allow-empty -m two &&
two=$(git rev-parse HEAD) &&
# now make a ton of refs; our goal here is to overflow the pipe buffer
# when reporting the ref status, which will cause the demuxer to block
# on write()
for i in $(seq 20000); do
echo "create refs/heads/this-is-a-really-long-branch-name-$i $two"
done |
git update-ref --stdin &&
# now make a corruption in the history such that pack-objects will fail
rm -vf .git/objects/$(echo $one | sed 's}..}&/}') &&
# and then push the result
git init --bare dst.git &&
git push --mirror dst.git
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use struct object_id in three fields in struct ref and convert all the
necessary places that use it.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
|
|
The client side codepaths in "git push" have been cleaned up
and the user can request to perform an optional "signed push",
i.e. sign only when the other end accepts signed push.
* db/push-sign-if-asked:
push: add a config option push.gpgSign for default signed pushes
push: support signing pushes iff the server supports it
builtin/send-pack.c: use parse_options API
config.c: rename git_config_maybe_bool_text and export it as git_parse_maybe_bool
transport: remove git_transport_options.push_cert
gitremote-helpers.txt: document pushcert option
Documentation/git-send-pack.txt: document --signed
Documentation/git-send-pack.txt: wrap long synopsis line
Documentation/git-push.txt: document when --signed may fail
|
|
Add a new flag --sign=true (or --sign=false), which means the same
thing as the original --signed (or --no-signed). Give it a third
value --sign=if-asked to tell push and send-pack to send a push
certificate if and only if the server advertised a push cert nonce.
If not, warn the user that their push may not be as secure as they
thought.
Signed-off-by: Dave Borowitz <dborowitz@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Identify parts of the code that knows that we use SHA-1 hash to
name our objects too much, and use (1) symbolic constants instead
of hardcoded 20 as byte count and/or (2) use struct object_id
instead of unsigned char [20] for object names.
* bc/object-id:
apply: convert threeway_stage to object_id
patch-id: convert to use struct object_id
commit: convert parts to struct object_id
diff: convert struct combine_diff_path to object_id
bulk-checkin.c: convert to use struct object_id
zip: use GIT_SHA1_HEXSZ for trailers
archive.c: convert to use struct object_id
bisect.c: convert leaf functions to use struct object_id
define utility functions for object IDs
define a structure for object IDs
|
|
The "git push --signed" protocol extension did not limit what the
"nonce" that is a server-chosen string can contain or how long it
can be, which was unnecessarily lax. Limit both the length and the
alphabet to a reasonably small space that can still have enough
entropy.
* jc/push-cert:
push --signed: tighten what the receiving end can ask to sign
|
|
* sb/atomic-push:
send-pack: unify error messages for unsupported capabilities
|
|
Instead of blindly trusting the receiving side to give us a sensible
nonce to sign, limit the length (max 256 bytes) and the alphabet
(alnum and a few selected punctuations, enough to encode in base64)
that can be used in nonce.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If --signed is not supported, the error message names the remote
"receiving end". If --atomic is not supported, the error message
names the remote "server". Unify the naming to "receiving end"
as we're in the context of "push".
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Convert struct commit_graft and necessary local parts of commit.c.
Also, convert several constants based on the hex length of an SHA-1 to
use GIT_SHA1_HEXSZ, and move several magic constants into variables for
readability.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git push" has been taught a "--atomic" option that makes push to
update more than one ref an "all-or-none" affair.
* sb/atomic-push:
Document receive.advertiseatomic
t5543-atomic-push.sh: add basic tests for atomic pushes
push.c: add an --atomic argument
send-pack.c: add --atomic command line argument
send-pack: rename ref_update_to_be_sent to check_to_send_update
receive-pack.c: negotiate atomic push support
receive-pack.c: add execute_commands_atomic function
receive-pack.c: move transaction handling in a central place
receive-pack.c: move iterating over all commands outside execute_commands
receive-pack.c: die instead of error in case of possible future bug
receive-pack.c: shorten the execute_commands loop over all commands
|
|
This adds support to send-pack to negotiate and use atomic pushes
iff the server supports it. Atomic pushes are activated by a new command
line flag --atomic.
In order to do this we also need to change the semantics for send_pack()
slightly. The existing send_pack() function actually doesn't send all the
refs back to the server when multiple refs are involved, for example
when using --all. Several of the failure modes for pushes can already be
detected locally in the send_pack client based on the information from the
initial server side list of all the refs as generated by receive-pack.
Any such refs that we thus know would fail to push are thus pruned from
the list of refs we send to the server to update.
For atomic pushes, we have to deal thus with both failures that are detected
locally as well as failures that are reported back from the server. In order
to do so we treat all local failures as push failures too.
We introduce a new status code REF_STATUS_ATOMIC_PUSH_FAILED so we can
flag all refs that we would normally have tried to push to the server
but we did not due to local failures. This is to improve the error message
back to the end user to flag that "these refs failed to update since the
atomic push operation failed."
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This renames ref_update_to_be_sent to check_to_send_update and inverts
the meaning of the return value. Having the return value inverted we
can have different values for the error codes. This is useful in a
later patch when we want to know if we hit the CHECK_REF_STATUS_REJECTED
case.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fetching into or pushing from a shallow repository, we want to
aggressively mark edges as uninteresting, since this decreases the pack
size. However, aggressively marking edges can negatively affect
performance on large non-shallow repositories with lots of refs.
Teach pack-objects a --shallow option to indicate that we're pushing
from or fetching into a shallow repository. Use
--objects-edge-aggressive only for shallow repositories and otherwise
use --objects-edge, which performs better in the general case. Update
the callers to pass the --shallow option when they are dealing with a
shallow repository.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Allow "git push" request to be signed, so that it can be verified and
audited, using the GPG signature of the person who pushed, that the
tips of branches at a public repository really point the commits
the pusher wanted to, without having to "trust" the server.
* jc/push-cert: (24 commits)
receive-pack::hmac_sha1(): copy the entire SHA-1 hash out
signed push: allow stale nonce in stateless mode
signed push: teach smart-HTTP to pass "git push --signed" around
signed push: fortify against replay attacks
signed push: add "pushee" header to push certificate
signed push: remove duplicated protocol info
send-pack: send feature request on push-cert packet
receive-pack: GPG-validate push certificates
push: the beginning of "git push --signed"
pack-protocol doc: typofix for PKT-LINE
gpg-interface: move parse_signature() to where it should be
gpg-interface: move parse_gpg_output() to where it should be
send-pack: clarify that cmds_sent is a boolean
send-pack: refactor inspecting and resetting status and sending commands
send-pack: rename "new_refs" to "need_pack_data"
receive-pack: factor out capability string generation
send-pack: factor out capability string generation
send-pack: always send capabilities
send-pack: refactor decision to send update per ref
send-pack: move REF_STATUS_REJECT_NODELETE logic a bit higher
...
|
|
In order to prevent a valid push certificate for pushing into an
repository from getting replayed in a different push operation, send
a nonce string from the receive-pack process and have the signer
include it in the push certificate. The receiving end uses an HMAC
hash of the path to the repository it serves and the current time
stamp, hashed with a secret seed (the secret seed does not have to
be per-repository but can be defined in /etc/gitconfig) to generate
the nonce, in order to ensure that a random third party cannot forge
a nonce that looks like it originated from it.
The original nonce is exported as GIT_PUSH_CERT_NONCE for the hooks
to examine and match against the value on the "nonce" header in the
certificate to notice a replay, but returned "nonce" header in the
push certificate is examined by receive-pack and the result is
exported as GIT_PUSH_CERT_NONCE_STATUS, whose value would be "OK"
if the nonce recorded in the certificate matches what we expect, so
that the hooks can more easily check.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Record the URL of the intended recipient for a push (after
anonymizing it if it has authentication material) on a new "pushee
URL" header. Because the networking configuration (SSH-tunnels,
proxies, etc.) on the pushing user's side varies, the receiving
repository may not know the single canonical URL all the pushing
users would refer it as (besides, many sites allow pushing over
ssh://host/path and https://host/path protocols to the same
repository but with different local part of the path). So this
value may not be reliably used for replay-attack prevention
purposes, but this will still serve as a human readable hint to
identify the repository the certificate refers to.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With the interim protocol, we used to send the update commands even
though we already send a signed copy of the same information when
push certificate is in use. Update the send-pack/receive-pack pair
not to do so.
The notable thing on the receive-pack side is that it makes sure
that there is no command sent over the traditional protocol packet
outside the push certificate. Otherwise a pusher can claim to be
pushing one set of ref updates in the signed certificate while
issuing commands to update unrelated refs, and such an update will
evade later audits.
Finally, start documenting the protocol.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We would want to update the interim protocol so that we do not send
the usual update commands when the push certificate feature is in
use, as the same information is in the certificate. Once that
happens, the push-cert packet may become the only protocol command,
but then there is no packet to put the feature request behind, like
we always did.
As we have prepared the receiving end that understands the push-cert
feature to accept the feature request on the first protocol packet
(other than "shallow ", which was an unfortunate historical mistake
that has to come before everything else), we can give the feature
request on the push-cert packet instead of the first update protocol
packet, in preparation for the next step to actually update to the
final protocol.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While signed tags and commits assert that the objects thusly signed
came from you, who signed these objects, there is not a good way to
assert that you wanted to have a particular object at the tip of a
particular branch. My signing v2.0.1 tag only means I want to call
the version v2.0.1, and it does not mean I want to push it out to my
'master' branch---it is likely that I only want it in 'maint', so
the signature on the object alone is insufficient.
The only assurance to you that 'maint' points at what I wanted to
place there comes from your trust on the hosting site and my
authentication with it, which cannot easily audited later.
Introduce a mechanism that allows you to sign a "push certificate"
(for the lack of better name) every time you push, asserting that
what object you are pushing to update which ref that used to point
at what other object. Think of it as a cryptographic protection for
ref updates, similar to signed tags/commits but working on an
orthogonal axis.
The basic flow based on this mechanism goes like this:
1. You push out your work with "git push --signed".
2. The sending side learns where the remote refs are as usual,
together with what protocol extension the receiving end
supports. If the receiving end does not advertise the protocol
extension "push-cert", an attempt to "git push --signed" fails.
Otherwise, a text file, that looks like the following, is
prepared in core:
certificate version 0.1
pusher Junio C Hamano <gitster@pobox.com> 1315427886 -0700
7339ca65... 21580ecb... refs/heads/master
3793ac56... 12850bec... refs/heads/next
The file begins with a few header lines, which may grow as we
gain more experience. The 'pusher' header records the name of
the signer (the value of user.signingkey configuration variable,
falling back to GIT_COMMITTER_{NAME|EMAIL}) and the time of the
certificate generation. After the header, a blank line follows,
followed by a copy of the protocol message lines.
Each line shows the old and the new object name at the tip of
the ref this push tries to update, in the way identical to how
the underlying "git push" protocol exchange tells the ref
updates to the receiving end (by recording the "old" object
name, the push certificate also protects against replaying). It
is expected that new command packet types other than the
old-new-refname kind will be included in push certificate in the
same way as would appear in the plain vanilla command packets in
unsigned pushes.
The user then is asked to sign this push certificate using GPG,
formatted in a way similar to how signed tag objects are signed,
and the result is sent to the other side (i.e. receive-pack).
In the protocol exchange, this step comes immediately before the
sender tells what the result of the push should be, which in
turn comes before it sends the pack data.
3. When the receiving end sees a push certificate, the certificate
is written out as a blob. The pre-receive hook can learn about
the certificate by checking GIT_PUSH_CERT environment variable,
which, if present, tells the object name of this blob, and make
the decision to allow or reject this push. Additionally, the
post-receive hook can also look at the certificate, which may be
a good place to log all the received certificates for later
audits.
Because a push certificate carry the same information as the usual
command packets in the protocol exchange, we can omit the latter
when a push certificate is in use and reduce the protocol overhead.
This however is not included in this patch to make it easier to
review (in other words, the series at this step should never be
released without the remainder of the series, as it implements an
interim protocol that will be incompatible with the final one).
As such, the documentation update for the protocol is left out of
this step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We use it to make sure that the feature request is sent only once on
the very first request packet (ignoring the "shallow " line, which
was an unfortunate mistake we cannot retroactively fix with existing
receive-pack already deployed in the field) and we set it to "true"
with cmds_sent++, not because we care about the actual number of
updates sent but because it is merely an idiomatic way.
Set it explicitly to one to clarify that the code that uses this
variable only cares about its zero-ness.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The main loop over remote_refs list inspects the ref status
to see if we need to generate pack data (i.e. a delete-only push
does not need to send any additional data), resets it to "expecting
the status report" state, and formats the actual update commands
to be sent.
Split the former two out of the main loop, as it will become
conditional in later steps.
Besides, we should have code that does real thing here, before the
"Finally, tell the other end!" part ;-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The variable counts how many non-deleting command is being sent, but
is only checked with 0-ness to decide if we need to send the pack
data.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A run of 'var ? " var" : ""' fed to a long printf string in a deeply
nested block was hard to read. Move it outside the loop and format
it into a strbuf.
As an added bonus, the trick to add "agent=<agent-name>" by using
two conditionals is replaced by a more readable version.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We tried to avoid sending one extra byte, NUL and nothing behind it
to signal there is no protocol capabilities being sent, on the first
command packet on the wire, but it just made the code look ugly.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new helper function ref_update_to_be_sent() decides for each ref
if the update is to be sent based on the status previously set by
set_ref_status_for_push() and also if this is a mirrored push.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
20e8b465 (refactor ref status logic for pushing, 2010-01-08)
restructured the code to set status for each ref to be pushed, but
did not quite go far enough. We inspect the status set earlier by
set_refs_status_for_push() and then perform yet another update to
the status of a ref with an otherwise OK status to be deleted to
mark it with REF_STATUS_REJECT_NODELETE when the protocol tells us
never to delete.
Split the latter into a separate loop that comes before we enter the
per-ref loop. This way we would have one less condition to check in
the main loop.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most struct child_process variables are cleared using memset first after
declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to
initialize them statically instead. That's shorter, doesn't require a
function call and is slightly more readable (especially given that we
already have STRBUF_INIT, ARGV_ARRAY_INIT etc.).
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fetching from a shallow-cloned repository used to be forbidden,
primarily because the codepaths involved were not carefully vetted
and we did not bother supporting such usage. This attempts to allow
object transfer out of a shallow-cloned repository in a controlled
way (i.e. the receiver become a shallow repository with truncated
history).
* nd/shallow-clone: (31 commits)
t5537: fix incorrect expectation in test case 10
shallow: remove unused code
send-pack.c: mark a file-local function static
git-clone.txt: remove shallow clone limitations
prune: clean .git/shallow after pruning objects
clone: use git protocol for cloning shallow repo locally
send-pack: support pushing from a shallow clone via http
receive-pack: support pushing to a shallow clone via http
smart-http: support shallow fetch/clone
remote-curl: pass ref SHA-1 to fetch-pack as well
send-pack: support pushing to a shallow clone
receive-pack: allow pushes that update .git/shallow
connected.c: add new variant that runs with --shallow-file
add GIT_SHALLOW_FILE to propagate --shallow-file to subprocesses
receive/send-pack: support pushing from a shallow clone
receive-pack: reorder some code in unpack()
fetch: add --update-shallow to accept refs that update .git/shallow
upload-pack: make sure deepening preserves shallow roots
fetch: support fetching from a shallow repository
clone: support remote shallow repository
...
|
|
Commit f2c681cf ("send-pack: support pushing from a shallow clone
via http", 05-12-2013) adds the 'advertise_shallow_grafts_buf'
function as an external symbol.
Noticed by sparse. ("'advertise_shallow_grafts_buf' was not declared.
Should it be static?")
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove a few duplicate implementations of prefix/suffix comparison
functions, and rename them to starts_with and ends_with.
* cc/starts-n-ends-with:
replace {pre,suf}fixcmp() with {starts,ends}_with()
strbuf: introduce starts_with() and ends_with()
builtin/remote: remove postfixcmp() and use suffixcmp() instead
environment: normalize use of prefixcmp() by removing " != 0"
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The latter can do everything the former can and is used in many more
places.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Leaving only the function definitions and declarations so that any
new topic in flight can still make use of the old functions, replace
existing uses of the prefixcmp() and suffixcmp() with new API
functions.
The change can be recreated by mechanically applying this:
$ git grep -l -e prefixcmp -e suffixcmp -- \*.c |
grep -v strbuf\\.c |
xargs perl -pi -e '
s|!prefixcmp\(|starts_with\(|g;
s|prefixcmp\(|!starts_with\(|g;
s|!suffixcmp\(|ends_with\(|g;
s|suffixcmp\(|!ends_with\(|g;
'
on the result of preparatory changes in this series.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Up to now git has assumed that all servers are able to fix thin
packs. This is however not always the case.
Document the 'no-thin' capability and prevent send-pack from generating
a thin pack if the server advertises it.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The codepath that send_pack() calls pack_objects() mistakenly
closed the same file descriptor twice, leading to potentially
closing a wrong file descriptor that was opened in the meantime.
* jl/pack-transfer-avoid-double-close:
Clear fd after closing to avoid double-close error
|
|
In send_pack(), clear the fd passed to pack_objects() by setting
it to -1, since pack_objects() closes the fd (via a call to
run_command()). Likewise, in get_pack(), clear the fd passed to
run_command().
Not doing so risks having git_transport_push(), caller of
send_pack(), closing the fd again, possibly incorrectly closing
some other open file; or similarly with fetch_refs_from_pack(),
indirect caller of get_pack().
Signed-off-by: Jens Lindström <jl@opera.com>
Acked-by: Jeff King <peff@peff.net>
Acked-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This teaches the deepest part of the callchain for "git push" (and
"git send-pack") to enforce "the old value of the ref must be this,
otherwise fail this push" (aka "compare-and-swap" / "--lockref").
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The definition of "struct ref" in "cache.h", a header file so
central to the system, always confused me. This structure is not
about the local ref used by sha1-name API to name local objects.
It is what refspecs are expanded into, after finding out what refs
the other side has, to define what refs are updated after object
transfer succeeds to what values. It belongs to "remote.h" together
with "struct refspec".
While we are at it, also move the types and functions related to the
Git transport connection to a new header file connect.h
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most of the callers of packet_read_line just read into a
static 1000-byte buffer (callers which handle arbitrary
binary data already use LARGE_PACKET_MAX). This works fine
in practice, because:
1. The only variable-sized data in these lines is a ref
name, and refs tend to be a lot shorter than 1000
characters.
2. When sending ref lines, git-core always limits itself
to 1000 byte packets.
However, the only limit given in the protocol specification
in Documentation/technical/protocol-common.txt is
LARGE_PACKET_MAX; the 1000 byte limit is mentioned only in
pack-protocol.txt, and then only describing what we write,
not as a specific limit for readers.
This patch lets us bump the 1000-byte limit to
LARGE_PACKET_MAX. Even though git-core will never write a
packet where this makes a difference, there are two good
reasons to do this:
1. Other git implementations may have followed
protocol-common.txt and used a larger maximum size. We
don't bump into it in practice because it would involve
very long ref names.
2. We may want to increase the 1000-byte limit one day.
Since packets are transferred before any capabilities,
it's difficult to do this in a backwards-compatible
way. But if we bump the size of buffer the readers can
handle, eventually older versions of git will be
obsolete enough that we can justify bumping the
writers, as well. We don't have plans to do this
anytime soon, but there is no reason not to start the
clock ticking now.
Just bumping all of the reading bufs to LARGE_PACKET_MAX
would waste memory. Instead, since most readers just read
into a temporary buffer anyway, let's provide a single
static buffer that all callers can use. We can further wrap
this detail away by having the packet_read_line wrapper just
use the buffer transparently and return a pointer to the
static storage. That covers most of the cases, and the
remaining ones already read into their own LARGE_PACKET_MAX
buffers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The packets sent during ref negotiation are all terminated
by newline; even though the code to chomp these newlines is
short, we end up doing it in a lot of places.
This patch teaches packet_read_line to auto-chomp the
trailing newline; this lets us get rid of a lot of inline
chomping code.
As a result, some call-sites which are not reading
line-oriented data (e.g., when reading chunks of packfiles
alongside sideband) transition away from packet_read_line to
the generic packet_read interface. This patch converts all
of the existing callsites.
Since the function signature of packet_read_line does not
change (but its behavior does), there is a possibility of
new callsites being introduced in later commits, silently
introducing an incompatibility. However, since a later
patch in this series will change the signature, such a
commit would have to be merged directly into this commit,
not to the tip of the series; we can therefore ignore the
issue.
This is an internal cleanup and should produce no change of
behavior in the normal case. However, there is one corner
case to note. Callers of packet_read_line have never been
able to tell the difference between a flush packet ("0000")
and an empty packet ("0004"), as both cause packet_read_line
to return a length of 0. Readers treat them identically,
even though Documentation/technical/protocol-common.txt says
we must not; it also says that implementations should not
send an empty pkt-line.
By stripping out the newline before the result gets to the
caller, we will now treat the newline-only packet ("0005\n")
the same as an empty packet, which in turn gets treated like
a flush packet. In practice this doesn't matter, as neither
empty nor newline-only packets are part of git's protocols
(at least not for the line-oriented bits, and readers who
are not expecting line-oriented packets will be calling
packet_read directly, anyway). But even if we do decide to
care about the distinction later, it is orthogonal to this
patch. The right place to tighten would be to stop treating
empty packets as flush packets, and this change does not
make doing so any harder.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is just write_or_die by another name. The one
distinction is that write_or_die will treat EPIPE specially
by suppressing error messages. That's fine, as we die by
SIGPIPE anyway (and in the off chance that it is disabled,
write_or_die will simulate it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This code predates prefixcmp, so it used memcmp along with
static sizes. Replacing these memcmps with prefixcmp makes
the code much more readable, and the lack of static sizes
will make refactoring it in future patches simpler.
Note that we used to be unnecessarily liberal in parsing the
"unpack" status line, and would accept "unpack ok\njunk". No
version of git has ever produced that, and it violates the
BNF in Documentation/technical/pack-protocol.txt. Let's take
this opportunity to tighten the check by converting the
prefix comparison into a strcmp.
While we're in the area, let's also fix a vague error
message that does not follow our usual conventions (it
writes directly to stderr and does not use the "error:"
prefix).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we push to update an existing ref, if:
* the object at the tip of the remote is not a commit; or
* the object we are pushing is not a commit,
it won't be correct to suggest to fetch, integrate and push again,
as the old and new objects will not "merge". We should explain that
the push must be forced when there is a non-committish object is
involved in such a case.
If we do not have the current object at the tip of the remote, we do
not even know that object, when fetched, is something that can be
merged. In such a case, suggesting to pull first just like
non-fast-forward case may not be technically correct, but in
practice, most such failures are seen when you try to push your work
to a branch without knowing that somebody else already pushed to
update the same branch since you forked, so "pull first" would work
as a suggestion most of the time. And if the object at the tip is
not a commit, "pull first" will fail, without making any permanent
damage. As a side effect, it also makes the error message the user
will get during the next "push" attempt easier to understand, now
the user is aware that a non-commit object is involved.
In these cases, the current code already rejects such a push on the
client end, but we used the same error and advice messages as the
ones used when rejecting a non-fast-forward push, i.e. pull from
there and integrate before pushing again.
Introduce new rejection reasons and reword the messages
appropriately.
[jc: with help by Peff on message details]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
References are allowed to update from one commit-ish to another if the
former is an ancestor of the latter. This behavior is oriented to
branches which are expected to move with commits. Tag references are
expected to be static in a repository, though, thus an update to
something under refs/tags/ should be rejected unless the update is
forced.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
send_pack() is used by transport.c, part of libgit.a while it stays in
builtin/send-pack.c. Move it to send-pack.c so that we won't get
undefined reference if a program that uses libgit.a happens to pull it
in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
|
|
Also marks some more things as const, as needed.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The list of remote refs in struct transport should be const, because
builtin-fetch will get confused if it changes.
The url in git_connect should be const (and work on a copy) instead of
requiring the caller to copy it.
match_refs doesn't modify the refspecs it gets.
get_fetch_map and get_remote_ref don't change the list they get.
Allow transport get_refs_list methods to modify the struct transport.
Add a function to copy a list of refs, when a function needs a mutable
copy of a const list.
Add a function to check the type of a ref, as per the code in connect.c
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/forkexec:
Use the asyncronous function infrastructure to run the content filter.
Avoid a dup2(2) in apply_filter() - start_command() can do it for us.
t0021-conversion.sh: Test that the clean filter really cleans content.
upload-pack: Run rev-list in an asynchronous function.
upload-pack: Move the revision walker into a separate function.
Use the asyncronous function infrastructure in builtin-fetch-pack.c.
Add infrastructure to run a function asynchronously.
upload-pack: Use start_command() to run pack-objects in create_pack_file().
Have start_command() create a pipe to read the stderr of the child.
Use start_comand() in builtin-fetch-pack.c instead of explicit fork/exec.
Use run_command() to spawn external diff programs instead of fork/exec.
Use start_command() to run content filters instead of explicit fork/exec.
Use start_command() in git_connect() instead of explicit fork/exec.
Change git_connect() to return a struct child_process instead of a pid_t.
Conflicts:
builtin-fetch-pack.c
|
|
* jk/send-pack:
t5516: test update of local refs on push
send-pack: don't update tracking refs on error
|
|
* db/fetch-pack: (60 commits)
Define compat version of mkdtemp for systems lacking it
Avoid scary errors about tagged trees/blobs during git-fetch
fetch: if not fetching from default remote, ignore default merge
Support 'push --dry-run' for http transport
Support 'push --dry-run' for rsync transport
Fix 'push --all branch...' error handling
Fix compilation when NO_CURL is defined
Added a test for fetching remote tags when there is not tags.
Fix a crash in ls-remote when refspec expands into nothing
Remove duplicate ref matches in fetch
Restore default verbosity for http fetches.
fetch/push: readd rsync support
Introduce remove_dir_recursively()
bundle transport: fix an alloc_ref() call
Allow abbreviations in the first refspec to be merged
Prevent send-pack from segfaulting when a branch doesn't match
Cleanup unnecessary break in remote.c
Cleanup style nit of 'x == NULL' in remote.c
Fix memory leaks when disconnecting transport instances
Ensure builtin-fetch honors {fetch,transfer}.unpackLimit
...
|
|
This prepares the API of git_connect() and finish_connect() to operate on
a struct child_process. Currently, we just use that object as a placeholder
for the pid that we used to return. A follow-up patch will change the
implementation of git_connect() and finish_connect() to make full use
of the object.
Old code had early-return-on-error checks at the calling sites of
git_connect(), but since git_connect() dies on errors anyway, these checks
were removed.
[sp: Corrected style nit of "conn == NULL" to "!conn"]
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Previously, we updated the tracking refs (which match refs we
are pushing) while generating the list of refs to send.
However, at that point we don't know whether the refs were
accepted.
Instead, we now wait until we get a response code from the
server. If an error was indicated, we don't update any local
tracking refs. Technically some refs could have been updated
on the remote, but since the local ref update is just an
optimization to avoid an extra fetch, we are better off
erring on the side of correctness.
The user-visible message is now generated much later in the
program, and has been tweaked to make more sense.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
* maint:
Document additional 1.5.3.5 fixes in release notes
Avoid 'expr index' on Mac OS X as it isn't supported
filter-branch: update current branch when rewritten
fix filter-branch documentation
helpful error message when send-pack finds no refs in common.
Fix setup_git_directory_gently() with relative GIT_DIR & GIT_WORK_TREE
Correct typos in release notes for 1.5.3.5
|
|
Signed-off-by: Andrew Clausen <clausen@econ.upenn.edu>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
There's a number of tricky conflicts between master and
this topic right now due to the rewrite of builtin-push.
Junio must have handled these via rerere; I'd rather not
deal with them again so I'm pre-merging master into the
topic. Besides this topic somehow started to depend on
the strbuf series that was in next, but is now in master.
It no longer compiles on its own without the strbuf API.
* master: (184 commits)
Whip post 1.5.3.4 maintenance series into shape.
Minor usage update in setgitperms.perl
manual: use 'URL' instead of 'url'.
manual: add some markup.
manual: Fix example finding commits referencing given content.
Fix wording in push definition.
Fix some typos, punctuation, missing words, minor markup.
manual: Fix or remove em dashes.
Add a --dry-run option to git-push.
Add a --dry-run option to git-send-pack.
Fix in-place editing functions in convert.c
instaweb: support for Ruby's WEBrick server
instaweb: allow for use of auto-generated scripts
Add 'git-p4 commit' as an alias for 'git-p4 submit'
hg-to-git speedup through selectable repack intervals
git-svn: respect Subversion's [auth] section configuration values
gtksourceview2 support for gitview
fix contrib/hooks/post-receive-email hooks.recipients error message
Support cvs via git-shell
rebase -i: use diff plumbing instead of porcelain
...
Conflicts:
Makefile
builtin-push.c
rsh.c
|
|
Implement support for --dry-run, so that it can be used
in calls from git-push. With this flag set, git-send-pack
will not send any updates to the server.
Signed-off-by: Brian Ewins <brian.ewins@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
|
|
Anyplace we talk about the address of a remote repository we always
refer to it as a URL, especially in the configuration file and
.git/remotes where we call it "remote.$n.url" or start the first
line with "URL:". Calling this value a uri within the internal C
code just doesn't jive well with our commonly accepted terms.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A function intended to be called from builtins updating refs
by locking them before write, specially those that came from
scripts using "git update-ref".
[jc: with minor fixups]
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function for_each_remote() does exactly what the name
suggests.
The function remote_find_tracking() was extended to be able to
search remote refs for a given local ref. The caller sets
either src or dst (but not both) in the refspec parameter, and
remote_find_tracking() will fill in the other and return 0.
Both changes are required for the next step: simplification of
git-branch's --track functionality.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This means that send-pack and http-push will support pattern refspecs,
so builtin-push.c doesn't have to expand them, and also git push can
just turn --tags into "refs/tags/*", further simplifying
builtin-push.c
check_ref_format() gets a third "conditionally okay" result for
something that's valid as a pattern but not as a particular ref.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This also adds a --remote option to send-pack, which specifies the
configured remote being used. It is provided automatically by
git-push, and must match the url (which is still needed, since there
could be multiple urls).
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Make git notify the user about host resolution/connection attempts.
This is useful both as a progress indicator on slow links, and helps
reassure the user there are no firewall problems.
Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
For now it's just to get a more descriptive name. Later we might update the
push protocol to run more than one program on the other end. Moreover this
matches better the corresponding config option remote.<name>. receivepack.
--exec continues to work
Signed-off-by: Uwe Kleine-König <zeisberg@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
add all supported options to Documentation/git-....txt and the usage strings.
Signed-off-by: Uwe Kleine-König <zeisberg@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
We recently introduced a write_in_full() which would either write
the specified object or emit an error message and fail. In order
to fix the read side we now want to introduce a read_in_full()
but without an error emit. This patch cleans up the naming
of this family of calls:
1) convert the existing write_or_whine() to write_or_whine_pipe()
to better indicate its pipe specific nature,
2) convert the existing write_in_full() calls to write_or_whine()
to better indicate its nature,
3) introduce a write_in_full() providing a write or fail semantic,
and
4) convert write_or_whine() and write_or_whine_pipe() to use
write_in_full().
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When passing the revisions list to pack-objects we do not check for
errors nor short writes. Introduce a new write_in_full which will
handle short writes and report errors to the caller. Use this to
short cut the send on failure, allowing us to wait for and report
the child in case the failure is its fault.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This means one less process in the pipeline to worry about, and
removes about 1/8 of the code.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Everybody else uses is_null_sha1() -- there is no point to have its
own is_zero_sha1() anymore.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
send-pack builds a pipeline that runs "rev-list | pack-objects"
and sends the output from pack-objects to the other side, while
feeding the input side of that pipe from itself. However, the
file descriptor that is given to this pipeline (so that it can
be dup2(2)'ed into file descriptor 1 of pack-objects) is closed
by the caller before the complex fork+exec dance! Worse yet,
the caller already dup2's it to 1, so the child process did not
even have to.
I do not understand how this code could possibly have been
working, but it somehow was working by accident.
Merging the sliding mmap() code reveals this problem, presumably
because it keeps one extra file descriptor open for a packfile
and changes the way file descriptors are allocated. I am too
tired to diagnose the problem now, but this seems to be a
sensible fix.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
"git push $URL HEAD~6" created a bogus ref HEAD~6 immediately
under $GIT_DIR of the remote repository. While we should keep
refspecs that have arbitrary extended SHA-1 expression on the
source side working (e.g. "HEAD~6:refs/tags/yesterday"), we
should not create bogus ref on the other end.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This allows you to say
git send-pack $URL :refs/heads/$branch
to delete the named remote branch. The refspec $src:$dst means
replace the destination ref with the object known as $src on the
local side, so this is a natural extension to make an empty $src
mean "No object" to delete the target.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Currently git-push displays progress status for the local packing of
objects to send, but nothing once it starts to push it over the
connection. Having progress status in that later case is especially
nice when pushing lots of objects over a slow network link.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This adds a "int *flag" parameter to resolve_ref() and makes
for_each_ref() family to call callback function with an extra
"int flag" parameter. They are used to give two bits of
information (REF_ISSYMREF and REF_ISPACKED) about the ref.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This is a long overdue fix to the API for for_each_ref() family
of functions. It allows the callers to specify a callback data
pointer, so that the caller does not have to use static
variables to communicate with the callback funciton.
The updated for_each_ref() family takes a function of type
int (*fn)(const char *, const unsigned char *, void *)
and a void pointer as parameters, and calls the function with
the name of the ref and its SHA-1 with the caller-supplied void
pointer as parameters.
The commit updates two callers, builtin-name-rev.c and
builtin-pack-refs.c as an example.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* aw/send-pack:
send-pack: switch to using git-rev-list --stdin
|
|
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When we are generating packs to update remote repositories we
want to supply as much information as possible about the revisions
that already exist to rev-list in order optimise the pack as much
as possible. We need to pass two revisions for each branch we are
updating in the remote repository and one for each additional branch.
Where the remote repository has numerous branches we can run out
of command line space to pass them.
Utilise the git-rev-list --stdin mode to allow unlimited numbers
of revision constraints. This allows us to move back to the much
simpler unordered revision selection code.
[jc: added some comments in the code to describe the pipe flow
a bit.]
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.
A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*. This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.
[jc: Splitted the patch to "master" part, to be followed by a
patch for merge-recursive.c which is not in "master" yet.
Fixed the cast in the latter hunk to combine-diff.c which was
wrong in the original.
Also converted ones left-over in combine-diff.c, diff-lib.c and
upload-pack.c ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Introduces global inline:
hashcmp(const unsigned char *sha1, const unsigned char *sha2)
Uses memcmp for comparison and returns the result based on the length of
the hash name (a future runtime decision).
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This updates the type-enumeration constants introduced to reduce
the memory footprint of "struct object" to match the type bits
already used in the packfile format, by removing the former
(i.e. TYPE_* constant macros) and using the latter (i.e. enum
object_type) throughout the code for consistency.
Eventually we can stop passing around the "type strings"
entirely, and this will help - no confusion about two different
integer enumeration.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This makes git-peek-remote able to basically do everything that
git-ls-remote does (but obviously just for the native protocol, so no
http[s]: or rsync: support).
The default behaviour is the same, but you can now give a mixture of
"--refs", "--tags" and "--heads" flags, where "--refs" forces
git-peek-remote to only show real refs (ie none of the fakey tag lookups,
but also not the special pseudo-refs like HEAD and MERGE_HEAD).
The "--tags" and "--heads" flags respectively limit the output to just
regular tags and heads, of course.
You can still also ask to limit them by name too.
You can combine the flags, so
git peek-remote --refs --tags .
will show all local _true_ tags, without the generated tag lookups
(compare the output without the "--refs" flag).
And "--tags --heads" will show both tags and heads, but will avoid (for
example) any special refs outside of the standard locations.
I'm also planning on adding a "--ignore-local" flag that allows us to ask
it to ignore any refs that we already have in the local tree, but that's
an independent thing.
All this is obviously gearing up to making "git fetch" cheaper.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This shrinks "struct object" by a small amount, by getting rid of the
"struct type *" pointer and replacing it with a 3-bit bitfield instead.
In addition, we merge the bitfields and the "flags" field, which
incidentally should also remove a useless 4-byte padding from the object
when in 64-bit mode.
Now, our "struct object" is still too damn large, but it's now less
obviously bloated, and of the remaining fields, only the "util" (which is
not used by most things) is clearly something that should be eventually
discarded.
This shrinks the "git-rev-list --all" memory use by about 2.5% on the
kernel archive (and, perhaps more importantly, on the larger mozilla
archive). That may not sound like much, but I suspect it's more on a
64-bit platform.
There are other remaining inefficiencies (the parent lists, for example,
probably have horrible malloc overhead), but this was pretty obvious.
Most of the patch is just changing the comparison of the "type" pointer
from one of the constant string pointers to the appropriate new TYPE_xxx
small integer constant.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This makes sure that many commands that take refs on the command
line to honor core.warnambiguousrefs configuration. Earlier,
the commands affected by this patch did not read the
configuration file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Mark Wooding noticed there was a type mismatch warning in git.c; this
patch does things slightly differently (mostly tightening const) and
was what I was holding onto, waiting for the setup-revisions change
to be merged into the master branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
* jc/rev-list:
rev-list --objects: use full pathname to help hashing.
rev-list --objects-edge: remove duplicated edge commit output.
rev-list --objects-edge
* jc/pack-thin:
pack-objects: hash basename and direname a bit differently.
pack-objects: allow "thin" packs to exceed depth limits
pack-objects: use full pathname to help hashing with "thin" pack.
pack-objects: thin pack micro-optimization.
Use thin pack transfer in "git fetch".
Add git-push --thin.
send-pack --thin: use "thin pack" delta transfer.
Thin pack - create packfile with missing delta base.
Conflicts:
pack-objects.c (taking "next")
send-pack.c (taking "next")
|
|
Stephen C. Tweedie noticed that we give up running rev-list when
we see too many refs on the remote side. Limit the number of
negative references we give to rev-list and continue.
Not sending any negative references to rev-list is very bad --
we may be pushing a ref that is new to the other end.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The new flag loosens the usual "self containedness" requirment
of packfiles, and sends deltified representation of objects when
we know the other side has the base objects needed to unpack
them. This would help reducing the transfer size.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The git suite may not be in PATH (and thus programs such as
git-send-pack could not exec git-rev-list). Thus there is a need for
logic that will locate these programs. Modifying PATH is not
desirable as it result in behavior differing from the user's
intentions, as we may end up prepending "/usr/bin" to PATH.
- git C programs will use exec*_git_cmd() APIs to exec sub-commands.
- exec*_git_cmd() will execute a git program by searching for it in
the following directories:
1. --exec-path (as used by "git")
2. The GIT_EXEC_PATH environment variable.
3. $(gitexecdir) as set in Makefile (default value $(bindir)).
- git wrapper will modify PATH as before to enable shell scripts to
invoke "git-foo" commands.
Ideally, shell scripts should use the git wrapper to become independent
of PATH, and then modifying PATH will not be necessary.
[jc: with minor updates after a brief review.]
Signed-off-by: Michal Ostrowski <mostrows@watson.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This updates the protocol between git-send-pack/git-receive-pack
in a backward compatible way to allow failures at the receiving
end to be propagated back to the sender. Most notably, versions
of git-push before this could not notice if the update hook on
the receiving end refused to update the ref for its own policy
reasons.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Wnen refusing to push a head, we said cryptic "remote 'branch'
object X does not exist on local" or "remote ref 'branch' is not
a strict subset of local ref 'branch'". That was gittish.
Since the most likely reason this happens is because the pushed
head was not up-to-date, clarify the error message to say that
straight, and suggest pulling first.
First noticed by Johannes and seconded by Andreas.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When a push fails (for example when the remote head does not fast forward
to the desired ref) it is not correct to print "Everything up-to-date".
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
It used to make sense to have git-send-pack talk about the things it sent
when (a) it was a new program and (b) nobody had a lot of tags and
branches.
These days, it's just distracting to see tons of
'refs/tags/xyz': up-to-date
...
when updating a remote repo.
So shut it up by default, and add a "--verbose" flag for those who really
want to see it.
Also, since this makes he case of everything being up-to-date just totally
silent, make it say "Everything up-to-date" if no refs needed updating.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
In case some refs couldn't be pushed out due to an error (mostly the
not-a-proper-subset error), make git-send-pack exit with non-zero status
after the push is over (that is, it still tries to push out the rest
of the refs).
[jc: I adjusted a test for this change.]
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
If you try to push into an empty repository with no ref arguments to
git push, it doesn't do anything and doesn't say anything. This adds a
warning when send-pack isn't going to push anything, so you don't
assume that it silently did what you wanted.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
These are whole-tree operations and there is not much point
making them operable from within a subdirectory, but it is easy
to do so, and using setup_git_directory() upfront helps git://
proxy specification picked up from the correct place.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
One caller of deref_tag() was not careful enough to make sure
what deref_tag() returned was not NULL (i.e. we found a tag
object that points at an object we do not have). Fix it, and
warn about refs that point at such an incomplete tag where
needed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This allows the remote side (most notably, upload-pack) to show
additional information without affecting the downloader. Peek-remote
does not ignore them -- this is to make it useful for Pasky's
automatic tag following.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When more than two references need to be checked with
ref_newer() function, the second and later calls did not work
correctly. This was because the later calls found commits
retained by the "struct object" layer that still had smudges
made by earlier calls.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
Again I left the v2.6.11-tree tag behind. My bad.
This commit makes sure that we do not barf when pushing a ref
that is a non-commitish tag. You can update a remote ref under
the following conditions:
* You can always use --force.
* Creating a brand new ref is OK.
* If the remote ref is exactly the same as what you are
pushing, it is OK (nothing is pushed).
* You can replace a commitish with another commitish which is a
descendant of it, if you can verify the ancestry between them;
this and the above means you have to have what you are replacing.
* Otherwise you cannot update; you need to use --force.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This allows git-send-pack to push local refs to a destination
repository under different names.
Here is the name mapping rules for refs.
* If there is no ref mapping on the command line:
- if '--all' is specified, it is equivalent to specifying
<local> ":" <local> for all the existing local refs on the
command line
- otherwise, it is equivalent to specifying <ref> ":" <ref> for
all the refs that exist on both sides.
* <name> is just a shorthand for <name> ":" <name>
* <src> ":" <dst>
push ref that matches <src> to ref that matches <dst>.
- It is an error if <src> does not match exactly one of local
refs.
- It is an error if <dst> matches more than one remote refs.
- If <dst> does not match any remote refs, either
- it has to start with "refs/"; <dst> is used as the
destination literally in this case.
- <src> == <dst> and the ref that matched the <src> must not
exist in the set of remote refs; the ref matched <src>
locally is used as the name of the destination.
For example,
- "git-send-pack --all <remote>" works exactly as before;
- "git-send-pack <remote> master:upstream" pushes local master
to remote ref that matches "upstream". If there is no such
ref, it is an error.
- "git-send-pack <remote> master:refs/heads/upstream" pushes
local master to remote refs/heads/upstream, even when
refs/heads/upstream does not exist.
- "git-send-pack <remote> master" into an empty remote
repository pushes the local ref/heads/master to the remote
ref/heads/master.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
When pushing into multi-user repository, or when pushing to a
repository from a local repository that has rebased branches
that has been pruned, the destination repository can have head
commits that are missing from the local repository.
This should not matter as long as the local head of the branch
being pushed is a proper superset of the destination branch, but
we ended up trying to run rev-list telling it to exclude objects
reachable from those heads missing from the local repository,
causing it to barf. Prune those heads from the rev-list
parameter list, and make sure we do not try to push a branch
whose remote head is something we lack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
send-pack had a confusing misfeature that "send-pack --all
master" updated all refs, while "send-pack --all" did not do
anything. Make --all and explicit refs mutually exclusive, and
make sure "send-pack --all" updates all refs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
The check that the source is ahead of the destination incorrectly expects
pop_most_recent_commit() to gracefully handle an empty list.
Fix by just checking the list itself, rather than the return value of the
pop function.
[jc: I did the test script that demonstrated the problem]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
|
|
This should make sure that if you have multiple people pushing to the
same tree, they cannot overwrite each others work, but have to merge
before being able to update the common reference tree.
|
|
It really just boils down to one "get_remote_heads()" function, and a
common "struct ref" structure definition.
|
|
This affects only refs that the other side doesn't already have. The
ones it has are still filtered by the ref selection.
|
|
This adds documentation for 'smarter push' family of commands.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
|
|
Cut-and-paste dup noticed by Junio. It's not even harmless, since a
match also causes that match to be invalidated, so this made it
impossible to update an existing branch by name.
I'd only tested the case of "ref doesn't exist at all on the other end",
which worked fine.
|
|
The protocol always supported it, but send-pack didn't actually know how
to tell the other side about a new branch/tag.
NOTE! You'll have to name it explicitly on the command line: if you
don't name any branches, git-send-pack will default to the branches that
already exist.
|
|
"git_path()" returns a static pathname pointer into the git directory
using a printf-like format specifier.
"head_ref()" works like "for_each_ref()", except for just the HEAD.
|
|
It's a generic thing for matching refs from the other side.
|
|
I want to use it for git-fetch-pack too.
|
|
send_pack() was declared to return "int" (although nobody cared), but
didn't actually return anything.
|
|
This makes the receiver always send a full list of valid refs, which
will allow us to do better packs, as well as handle creation of new
refs. Eventually. Right now we just moved the matching and enabled it.
So now you can do
git-send-pack host:path branch1 branch2
to only send branches "branch1" and "branch2".
|
|
This concludes this lesson. I've actually successfully sent an update
using the git-send-pack command.
Probably tons of work still to do, and nasty debugging, but it's now
actually potentially useful.
|
|
Me tired.
|
|
|
|
Right now it just shows which refs it picks up, and whether they are
the same or changed on the remote end. Getting there..
|
|
|
|
Like git-receive-pack, this is only partway done.
|
