| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When an on-disk sparse index is expanded to a full one, it could be
due to some worktree state that requires looking at file entries
hidden within sparse tree entries. This can be avoided if the
worktree is cleaned up and some other issues related to the index
state are resolved.
Expand the advice message to include all of these cases, since 'git
sparse-checkout clean' is not currently capable of handling all
cases.
In the future, we may improve the behavior of 'git sparse-checkout
clean' to handle all of the cases.
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In my experience, the most-common reason that the sparse index must
expand to a full one is because there is some leftover file in a tracked
directory that is now outside of the sparse-checkout. The new 'git
sparse-checkout clean' command will find and delete these directories,
so point users to it when they hit the sparse index expansion advice.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Mark code units that generate warnings with `-Wsign-compare`. This
allows for a structured approach to get rid of all such warnings over
time in a way that can be easily measured.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While we free the `fsmonitor_dirty` member of `struct index_state`, we
do not free the contents of that EWAH. Do so by using `ewah_free()`
instead of `FREE_AND_NULL()`.
This leak is exposed by t7519, but plugging it alone does not make the
test suite pass.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git sparse-checkout disable" turns a sparse checkout into a
regular checkout, the index is fully expanded. This totally
expected behaviour however had an "oops, we are expanding the
index" advice message, which has been corrected.
* ds/sparse-checkout-expansion-advice:
sparse-checkout: disable advice in 'disable'
|
|
When running 'git sparse-checkout disable' with the sparse index
enabled, Git is expected to expand the index into a full index. However,
it currently outputs the advice message saying that that is unexpected
and likely due to an issue with the working directory.
Disable this advice message when in this code path. Establish a pattern
for doing a similar removal in the future.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In "environment.h" we have quite a lot of functions and variables that
either explicitly or implicitly depend on `the_repository`.
The implicit set of stateful declarations includes for example variables
which get populated when parsing a repository's Git configuration. This
set of variables is broken by design, as their state often depends on
the last repository config that has been parsed. So they may or may not
represent the state of `the_repository`.
Fixing that is quite a big undertaking, and later patches in this series
will demonstrate a solution for a first small set of those variables. So
for now, let's guard these with `USE_THE_REPOSITORY_VARIABLE` so that
callers are aware of the implicit dependency.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A new warning message is issued when a command has to expand a
sparse index to handle working tree cruft that are outside of the
sparse checkout.
* ds/advice-sparse-index-expansion:
advice: warn when sparse index expands
|
|
Typically, forcing a sparse index to expand to a full index means that
Git could not determine the status of a file outside of the
sparse-checkout and needed to expand sparse trees into the full list of
sparse blobs. This operation can be very slow when the sparse-checkout
is much smaller than the full tree at HEAD.
When users are in this state, there is usually a modified or untracked
file outside of the sparse-checkout mentioned by the output of 'git
status'. There are a number of reasons why this is insufficient:
1. Users may not have a full understanding of which files are inside or
outside of their sparse-checkout. This is more common in monorepos
that manage the sparse-checkout using custom tools that map build
dependencies into sparse-checkout definitions.
2. In some cases, an empty directory could exist outside the
sparse-checkout and these empty directories are not reported by 'git
status' and friends.
3. If the user has '.gitignore' or 'exclude' files, then 'git status'
will squelch the warnings and not demonstrate any problems.
In order to help users who are in this state, add a new advice message
to indicate that a sparse index is expanded to a full index. This
message should be written at most once per process, so add a static
global 'give_advice_on_expansion' to sparse-index.c. Further, there is a
case in 'git sparse-checkout set' that uses the sparse index as an
in-memory data structure (even when writing a full index) so we need to
disable the message in that kind of case.
The t1092-sparse-checkout-compatibility.sh test script compares the
behavior of several Git commands across full and sparse repositories,
including sparse repositories with and without a sparse index. We need
to disable the advice in the sparse-index repo to avoid differences in
stderr. By leaving the advice on in the sparse-checkout repo (without
the sparse index), we can test the behavior of disabling the advice in
convert_to_sparse(). (Indeed, these tests are how that necessity was
discovered.) Add a test that reenables the advice and demonstrates that
the message is output.
The advice message is defined outside of expand_index() to avoid super-
wide lines. It is also defined as a macro to avoid compile issues with
-Werror=format-security.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The clear_skip_worktree_from_present_files() method was first introduced
in af6a51875a (repo_read_index: clear SKIP_WORKTREE bit from files
present in worktree, 2022-01-14) to allow better interaction with the
working directory in the presence of paths outside of the
sparse-checkout. The initial implementation would lstat() every single
SKIP_WORKTREE path to see if it existed; if it ran across a sparse
directory that existed (when a sparse index was in use), then it would
expand the index and then check every SKIP_WORKTREE path.
Since these lstat() calls were very expensive, this was improved in
d79d299352 (Accelerate clear_skip_worktree_from_present_files() by
caching, 2022-01-14) by caching directories that do not exist so it
could avoid lstat()ing any files under such directories. However, there
are some inefficiencies in that caching mechanism.
The caching mechanism stored only the parent directory as not existing,
even if a higher parent directory also does not exist. This means that
wasted lstat() calls would occur when the paths passed to path_found()
change immediate parent directories but within the same parent directory
that does not exist.
To create an example repository that demonstrates this problem, it helps
to have a directory outside of the sparse-checkout that contains many
deep paths. In particular, the first paths (in lexicographic order)
underneath the sparse directory should have deep directory structures,
maximizing the difference between the old caching algorithm that looks
to a single parent and the new caching algorithm that looks to the
top-most missing directory.
The performance test script p2000-sparse-operations.sh takes the sample
repository and copies its HEAD to several copies nested in directories
of the form f<i>/f<j>/f<k> where i, j, and k are numbers from 1 to 4.
The sparse-checkout cone is then selected as "f2/f4/". Creating "f1/f1/"
will trigger the behavior and also lead to some interesting cases for
the caching algorithm since "f1/f1/" exists but "f1/f2/" and "f3/" do
not.
This is difficult to notice when running performance tests using the Git
repository (or a blow-up of the Git repository, as in
p2000-sparse-operations.sh) because Git has a very shallow directory
structure.
This change reorganizes the caching algorithm to focus on storing the
highest level leading directory that does not exist; specifically this
means that that directory's parent _does_ exist. By doing a little extra
work on a path passed to path_found(), we can short-circuit all of the
paths passed to path_found() afterwards that match a prefix with that
non-existing directory. When in a repository where the first sparse file
is likely to have a much deeper path than the first non-existing
directory, this can realize significant gains.
The details of this algorithm require careful attention, so the new
implementation of path_found() has detailed comments, including the use
of a new max_common_dir_prefix() method that may be of independent
interest.
It's worth noting that this is not universally positive, since we are
doing extra lstat() calls to establish the exact path to cache. In the
blow-up of the Git repository, we can see that the lstat count
_increases_ from 28 to 31. However, these numbers were already
artificially low.
Contributor Elijah Newren created a publicly-available test repository
that demonstrates the difference in these caching algorithms in the most
extreme way. To test, follow these steps:
git clone --sparse https://github.com/newren/gvfs-like-git-bomb
cd gvfs-like-git-bomb
./runme.sh # NOTE: check scripts before running!
At this point, assuming you do not have index.sparse=true set globally,
the index has one million paths with the SKIP_WORKTREE bit and they will
all be sent to path_found() in the sparse loop. You can measure this by
running 'git status' with GIT_TRACE2_PERF=1:
Sparse files in the index: 1,000,000
sparse_lstat_count (before): 200,000
sparse_lstat_count (after): 2
And here are the performance numbers:
Benchmark 1: old
Time (mean ± σ): 397.5 ms ± 4.1 ms
Range (min … max): 391.2 ms … 404.8 ms 10 runs
Benchmark 2: new
Time (mean ± σ): 252.7 ms ± 3.1 ms
Range (min … max): 249.4 ms … 259.5 ms 11 runs
Summary
'new' ran
1.57 ± 0.02 times faster than 'old'
By modifying this example further, we can demonstrate a more realistic
example and include the sparse index expansion. Continue by creating
this directory, confusing both caching algorithms somewhat:
mkdir -p bomb/d/e/f/a/a
Then re-run the 'git status' tests to see these statistics:
Sparse files in the index: 1,000,000
sparse_lstat_count (before): 724,010
sparse_lstat_count (after): 106
Benchmark 1: old
Time (mean ± σ): 753.0 ms ± 3.5 ms
Range (min … max): 749.7 ms … 760.9 ms 10 runs
Benchmark 2: new
Time (mean ± σ): 201.4 ms ± 3.2 ms
Range (min … max): 196.0 ms … 207.9 ms 14 runs
Summary
'new' ran
3.74 ± 0.06 times faster than 'old'
Note that if this repository had a sparse index enabled, the additional
cost of expanding the sparse index affects the total time of these
commands by over four seconds, significantly diminishing the benefit of
the caching algorithm. Having existing paths outside of the
sparse-checkout is a known performance issue for the sparse index and is
a known trade-off for the performance benefits given when no such paths
exist.
Using an internal monorepo with over two million paths at HEAD and a
typical sparse-checkout cone such that the sparse index contains
~190,000 entries (including over two thousand sparse trees), I was able
to measure these lstat counts when one sparse directory actually exists
on disk:
Sparse files in expanded index: 1,841,997
full_lstat_count (before): 1,188,161
full_lstat_count (after): 4,404
This resulted in this absolute time change, on a warm disk:
Time in full loop (before): 13.481 s
Time in full loop (after): 0.081 s
(These times were calculated on a Windows machine, where lstat() is
slower than a similar Linux machine.)
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The clear_skip_worktree.. methods already report some statistics about
how many cache entries are checked against path_found() due to having
the skip-worktree bit set. However, due to path_found() performing some
caching, this isn't the only information that would be helpful to
report.
Add a new lstat_count member to the path_found_data struct to count the
number of times path_found() calls lstat(). This will be helpful to help
explain performance problems in this method as well as to demonstrate
future changes to the caching algorithm in a more concrete way than
end-to-end timings.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The path_found() method previously reused strings from the cache entries
the calling methods were using. This prevents string manipulation in
place and causes some odd reallocation before the final lstat() call in
the method.
Refactor the method to use strbufs and copy the path into the strbuf,
but also only the parent directory and not the whole path. This looks
like extra copying when assigning the path to the strbuf, but we save an
allocation by dropping the 'tmp' string, and we are "reusing" the copy
from 'tmp' to put the data in the strbuf.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In advance of changing the behavior of path_found(), take all of the
intermediate data values and group them into a single struct. This
simplifies the method prototype as well as the initialization. Future
changes can be made directly to the struct and method without changing
the callers with this approach.
Note that the clear_path_found_data() method is currently empty, as
there is nothing to free. This method is a placeholder for future
changes that require a non-trivial implementation. Its stub is created
now so consumers could call it now and not change in future changes.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The clear_skip_worktree_from_present_files() method was introduced in
af6a51875a (repo_read_index: clear SKIP_WORKTREE bit from files present
in worktree, 2022-01-14) to help cases where sparse-checkout is enabled
but some paths outside of the sparse-checkout also exist on disk. This
operation can be slow as it needs to check path existence in a way not
stored in the index, so caching was introduced in d79d299352 (Accelerate
clear_skip_worktree_from_present_files() by caching, 2022-01-14).
This check is particularly confusing in the presence of a sparse index,
as a sparse tree entry corresponding to an existing directory must first
be expanded to a full index before examining the paths within. This is
currently implemented using a 'goto' and a boolean variable to ensure we
restart only once.
Even with that caching, it was noticed that this could take a long time
to execute. 89aaab11a3 (index: add trace2 region for clear skip
worktree, 2022-11-03) introduced trace2 regions to measure this time.
Further, the way the loop repeats itself was slightly confusing and
prone to breakage, so a BUG() statement was added in 8c7abdc596 (index:
raise a bug if the index is materialised more than once, 2022-11-03) to
be sure that the second run of the loop does not hit any sparse trees.
One thing that can be confusing about the current setup is that the
trace2 regions nest and it is not clear that a second loop is running
after a sparse index is expanded. Here is an example of what the regions
look like in a typical case:
| region_enter | ... | label:clear_skip_worktree_from_present_files
| region_enter | ... | ..label:update
| region_leave | ... | ..label:update
| region_enter | ... | ..label:ensure_full_index
| region_enter | ... | ....label:update
| region_leave | ... | ....label:update
| region_leave | ... | ..label:ensure_full_index
| data | ... | ..sparse_path_count:1
| data | ... | ..sparse_path_count_full:269538
| region_leave | ... | label:clear_skip_worktree_from_present_files
One thing that is particularly difficult to understand about these
regions is that most of the time is spent between the close of the
ensure_full_index region and the reporting of the end data. This is
because of the restart of the loop being within the same region as the
first iteration of the loop.
This change refactors the method into two separate methods that are
traced separately. This will be more important later when we change
other features of the methods, but for now the only functional change is
the difference in the structure of the trace regions.
After this change, the same telemetry section is split into three
distinct chunks:
| region_enter | ... | label:clear_skip_worktree_from_present_files_sparse
| data | ... | ..sparse_path_count:1
| region_leave | ... | label:clear_skip_worktree_from_present_files_sparse
| region_enter | ... | label:update
| region_leave | ... | label:update
| region_enter | ... | label:ensure_full_index
| region_enter | ... | ..label:update
| region_leave | ... | ..label:update
| region_leave | ... | label:ensure_full_index
| region_enter | ... | label:clear_skip_worktree_from_present_files_full
| data | ... | ..full_path_count:269538
| region_leave | ... | label:clear_skip_worktree_from_present_files_full
Here, we see the sparse loop terminating early with its first sparse
path being a sparse directory containing a file. Then, that loop's
region terminates before ensure_full_index begins (in this case, the
cache-tree must also be computed). Then, _after_ the index is expanded,
the full loop begins with its own region.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A caller called index_file_exists() that takes a string expressed
as <ptr, length> with a wrong length, which has been corrected.
* jh/sparse-index-expand-to-path-fix:
sparse-index: pass string length to index_file_exists()
|
|
The call to index_file_exists() in the loop in expand_to_path() passes
the wrong string length. Let's fix that.
The loop in expand_to_path() searches the name-hash for each
sub-directory prefix in the provided pathname. That is, by searching
for "dir1/" then "dir1/dir2/" then "dir1/dir2/dir3/" and so on until
it finds a cache-entry representing a sparse directory.
The code creates "strbuf path_mutable" to contain the working pathname
and modifies the buffer in-place by temporarily replacing the character
following each successive "/" with NUL for the duration of the call to
index_file_exists().
It does not update the strbuf.len during this substitution.
Pass the patched length of the prefix path instead.
Signed-off-by: Jeff Hostetler <jeffhostetler@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The read_tree() function reads trees recursively (via its read_tree_at()
helper). This can cause it to run out of stack space on very deep trees.
Let's teach it about the new core.maxTreeDepth option.
The easiest way to demonstrate this is via "ls-tree -r", which the test
covers. Note that I needed a tree depth of ~30k to trigger a segfault on
my Linux system, not the 4100 used by our "big" test in t6700. However,
that test still tells us what we want: that the default 4096 limit is
enough to prevent segfaults on all platforms. We could bump it, but that
increases the cost of the test setup for little gain.
As an interesting side-note: when I originally wrote this patch about 4
years ago, I needed a depth of ~50k to segfault. But porting it forward,
the number is much lower. Seemingly little things like cf0983213c (hash:
add an algo member to struct object_id, 2021-04-26) take it from 32,722
to 29,080.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
alloc_nr, ALLOC_GROW, and ALLOC_GROW_BY are commonly used macros for
dynamic array allocation. Moving these macros to git-compat-util.h with
the other alloc macros focuses alloc.[ch] to allocation for Git objects
and additionally allows us to remove inclusions to alloc.h from files
that solely used the above macros.
Signed-off-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This creates a new fsmonitor-ll.h with most of the functions from
fsmonitor.h, though it leaves three inline functions where they were.
Two-thirds of the files that previously included fsmonitor.h did not
need those three inline functions or the six extra includes those inline
functions required, so this allows them to only include the lower level
header.
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dozens of files made use of gettext functions, without explicitly
including gettext.h. This made it more difficult to find which files
could remove a dependence on cache.h. Make C files explicitly include
gettext.h if they are using it.
However, while compat/fsmonitor/fsm-ipc-darwin.c should also gain an
include of gettext.h, it was left out to avoid conflicting with an
in-flight topic.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This allows us to replace includes of cache.h with includes of the much
smaller alloc.h in many places. It does mean that we also need to add
includes of alloc.h in a number of C files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the "repo" member was added to "the_index" in [1] the
repo_read_index() was made to populate it, but the unpopulated
"the_index" variable didn't get the same treatment.
Let's do that in initialize_the_repository() when we set it up, and
likewise for all of the current callers initialized an empty "struct
index_state".
This simplifies code that needs to deal with "the_index" or a custom
"struct index_state", we no longer need to second-guess this part of
the "index_state" deep in the stack. A recent example of such
second-guessing is the "istate->repo ? istate->repo : the_repository"
code in [2]. We can now simply use "istate->repo".
We're doing this by making use of the INDEX_STATE_INIT() macro (and
corresponding function) added in [3], which now have mandatory "repo"
arguments.
Because we now call index_state_init() in repository.c's
initialize_the_repository() we don't need to handle the case where we
have a "repo->index" whose "repo" member doesn't match the "repo"
we're setting up, i.e. the "Complete the double-reference" code in
repo_read_index() being altered here. That logic was originally added
in [1], and was working around the lack of what we now have in
initialize_the_repository().
For "fsmonitor-settings.c" we can remove the initialization of a NULL
"r" argument to "the_repository". This was added back in [4], and was
needed at the time for callers that would pass us the "r" from an
"istate->repo". Before this change such a change to
"fsmonitor-settings.c" would segfault all over the test suite (e.g. in
t0002-gitfile.sh).
This change has wider eventual implications for
"fsmonitor-settings.c". The reason the other lazy loading behavior in
it is required (starting with "if (!r->settings.fsmonitor) ..." is
because of the previously passed "r" being "NULL".
I have other local changes on top of this which move its configuration
reading to "prepare_repo_settings()" in "repo-settings.c", as we could
now start to rely on it being called for our "r". But let's leave all
of that for now, and narrowly remove this particular part of the
lazy-loading.
1. 1fd9ae517c4 (repository: add repo reference to index_state,
2021-01-23)
2. ee1f0c242ef (read-cache: add index.skipHash config option,
2023-01-06)
3. 2f6b1eb794e (cache API: add a "INDEX_STATE_INIT" macro/function,
add release_index(), 2023-01-12)
4. 1e0ea5c4316 (fsmonitor: config settings are repository-specific,
2022-03-25)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the ensure_full_index() function stricter, and have it only
accept a non-NULL "struct index_state". This function (and this
behavior) was added in [1].
The only reason it needed to be this lax was due to interaction with
repo_index_has_changes(). See the addition of that code in [2].
The other reason for why this was needed dates back to interaction
with code added in [3]. In [4] we started calling ensure_full_index()
in unpack_trees(), but the caller added in 34110cd4e39 wants to pass
us a NULL "dst_index". Let's instead do the NULL check in
unpack_trees() itself.
1. 4300f8442a2 (sparse-index: implement ensure_full_index(), 2021-03-30)
2. 0c18c059a15 (read-cache: ensure full index, 2021-04-01)
3. 34110cd4e39 (Make 'unpack_trees()' have a separate source and
destination index, 2008-03-06)
4. 6863df35503 (unpack-trees: ensure full index, 2021-03-30)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This function added in [1] was subsequently used in [2]. All of the
calls to it are in name-hash.c, and come after calls to
lazy_init_name_hash(istate). The first thing that function does is:
if (istate->name_hash_initialized)
return;
So we can already assume that we have a non-NULL "istate" here, or
we'd be segfaulting. Let's not confuse matters by making it appear
that's not the case.
1. 71f82d032f3 (sparse-index: expand_to_path(), 2021-04-12)
2. 4589bca829a (name-hash: use expand_to_path(), 2021-04-12)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If clear_skip_worktree_from_present_files() encounter a sparse directory,
it fully materialise the index which should expand any sparse directories
and start going through each entries again. If this happens more than once,
raise it with a BUG.
Signed-off-by: Anh Le <anh@canva.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
When using sparse checkout, clear_skip_worktree_from_present_files() must
enumerate index entries to find ones with the SKIP_WORKTREE bit to
determine whether those index entries exist on disk (in which case their
SKIP_WORKTREE bit should be removed).
In a large repository, this may take considerable time depending on the
size of the index.
Add a trace2 region to surface this information, keeping a count of how
many paths have been checked. Separately, keep counts after a full index is
materialized.
Signed-off-by: Anh Le <anh@canva.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
"sparse-checkout" learns to work well with the sparse-index
feature.
* ds/sparse-sparse-checkout:
sparse-checkout: integrate with sparse index
p2000: add test for 'git sparse-checkout [add|set]'
sparse-index: complete partial expansion
sparse-index: partially expand directories
sparse-checkout: --no-sparse-index needs a full index
cache-tree: implement cache_tree_find_path()
sparse-index: introduce partially-sparse indexes
sparse-index: create expand_index()
t1092: stress test 'git sparse-checkout set'
t1092: refactor 'sparse-index contents' test
|
|
To complete the implementation of expand_to_pattern_list(), we need to
detect when a sparse directory entry should remain sparse. This avoids a
full expansion, so we now need to use the PARTIALLY_SPARSE mode to
indicate this state.
There still are no callers to this method, but we will add one in the
next change.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The expand_to_pattern_list() method expands sparse directory entries
to their list of contained files when either the pattern list is NULL or
the directory is contained in the new pattern list's cone mode patterns.
It is possible that the pattern list has a recursive match with a
directory 'A/B/C/' and so an existing sparse directory 'A/B/' would need
to be expanded. If there exists a directory 'A/B/D/', then that
directory should not be expanded and instead we can create a sparse
directory.
To implement this, we plug into the add_path_to_index() callback for the
call to read_tree_at(). Since we now need access to both the index we
are writing and the pattern list we are comparing, create a 'struct
modify_index_context' to use as a data transfer object. It is important
that we use the given pattern list since we will use this pattern list
to change the sparse-checkout patterns and cannot use
istate->sparse_checkout_patterns.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A future change will present a temporary, in-memory mode where the index
can both contain sparse directory entries but also not be completely
collapsed to the smallest possible sparse directories. This will be
necessary for modifying the sparse-checkout definition while using a
sparse index.
For now, convert the single-bit member 'sparse_index' in 'struct
index_state' to be a an 'enum sparse_index_mode' with three modes:
* INDEX_EXPANDED (0): No sparse directories exist. This is always the
case for repositories that do not use cone-mode sparse-checkout.
* INDEX_COLLAPSED: Sparse directories may exist. Files outside the
sparse-checkout cone are reduced to sparse directory entries whenever
possible.
* INDEX_PARTIALLY_SPARSE: Sparse directories may exist. Some file
entries outside the sparse-checkout cone may exist. Running
convert_to_sparse() may further reduce those files to sparse directory
entries.
The main reason to store this extra information is to allow
convert_to_sparse() to short-circuit when the index is already in
INDEX_EXPANDED mode but to actually do the necessary work when in
INDEX_PARTIALLY_SPARSE mode.
The INDEX_PARTIALLY_SPARSE mode will be used in an upcoming change.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This is the first change in a series to allow modifying the
sparse-checkout pattern set without expanding a sparse index to a full
one in the process. Here, we focus on the problem of expanding the
pattern set through a command like 'git sparse-checkout add <path>'
which needs to create new index entries for the paths now being written
to the worktree.
To achieve this, we need to be able to replace sparse directory entries
with their contained files and subdirectories. Once this is complete,
other code paths can discover those cache entries and write the
corresponding files to disk before committing the index.
We already have logic in ensure_full_index() that expands the index
entries, so we will use that as our base. Create a new method,
expand_index(), which takes a pattern list, but for now mostly ignores
it. The current implementation is only correct when the pattern list is
NULL as that does the same as ensure_full_index(). In fact,
ensure_full_index() is converted to a shim over expand_index().
A future update will actually implement expand_index() to its full
capabilities. For now, it is created and documented.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Expose 'is_sparse_index_allowed()' publicly so that it may be used by
callers outside of 'sparse-index.c'. While no such callers exist yet, it
will be used in a subsequent commit.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In sparse-checkouts, files mis-marked as missing from the working tree
could lead to later problems. Such files were hard to discover, and
harder to correct. Automatically detecting and correcting the marking
of such files has been added to avoid these problems.
* en/present-despite-skipped:
repo_read_index: add config to expect files outside sparse patterns
Accelerate clear_skip_worktree_from_present_files() by caching
Update documentation related to sparsity and the skip-worktree bit
repo_read_index: clear SKIP_WORKTREE bit from files present in worktree
unpack-trees: fix accidental loss of user changes
t1011: add testcase demonstrating accidental loss of user modifications
|
|
Typically with sparse checkouts, we expect files outside the sparsity
patterns to be marked as SKIP_WORKTREE and be missing from the working
tree. Sometimes this expectation would be violated however; including
in cases such as:
* users grabbing files from elsewhere and writing them to the worktree
(perhaps by editing a cached copy in an editor, copying/renaming, or
even untarring)
* various git commands having incomplete or no support for the
SKIP_WORKTREE bit[1,2]
* users attempting to "abort" a sparse-checkout operation with a
not-so-early Ctrl+C (updating $GIT_DIR/info/sparse-checkout and the
working tree is not atomic)[3].
When the SKIP_WORKTREE bit in the index did not reflect the presence of
the file in the working tree, it traditionally caused confusion and was
difficult to detect and recover from. So, in a sparse checkout, since
af6a51875a (repo_read_index: clear SKIP_WORKTREE bit from files present
in worktree, 2022-01-14), Git automatically clears the SKIP_WORKTREE
bit at index read time for entries corresponding to files that are
present in the working tree.
There is another workflow, however, where it is expected that paths
outside the sparsity patterns appear to exist in the working tree and
that they do not lose the SKIP_WORKTREE bit, at least until they get
modified. A Git-aware virtual file system[4] takes advantage of its
position as a file system driver to expose all files in the working
tree, fetch them on demand using partial clone on access, and tell Git
to pay attention to them on demand by updating the sparse checkout
pattern on writes. This means that commands like "git status" only have
to examine files that have potentially been modified, whereas commands
like "ls" are able to show the entire codebase without requiring manual
updates to the sparse checkout pattern.
Thus since af6a51875a, Git with such Git-aware virtual file systems
unsets the SKIP_WORKTREE bit for all files and commands like "git
status" have to fetch and examine them all.
Introduce a configuration setting sparse.expectFilesOutsideOfPatterns to
allow limiting the tracked set of files to a small set once again. A
Git-aware virtual file system or other application that wants to
maintain files outside of the sparse checkout can set this in a
repository to instruct Git not to check for the presence of
SKIP_WORKTREE files. The setting defaults to false, so most users of
sparse checkout will still get the benefit of an automatically updating
index to recover from the variety of difficult issues detailed in
af6a51875a for paths with SKIP_WORKTREE set despite the path being
present.
[1] https://lore.kernel.org/git/xmqqbmb1a7ga.fsf@gitster-ct.c.googlers.com/
[2] The three long paragraphs in the middle of
https://lore.kernel.org/git/CABPp-BH9tju7WVm=QZDOvaMDdZbpNXrVWQdN-jmfN8wC6YVhmw@mail.gmail.com/
[3] https://lore.kernel.org/git/CABPp-BFnFpzwGC11TLoLs8YK5yiisA5D5-fFjXnJsbESVDwZsA@mail.gmail.com/
[4] such as the vfsd described in
https://lore.kernel.org/git/20220207190320.2960362-1-jonathantanmy@google.com/
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git sparse-checkout" wants to work with per-worktree configuration,
but did not work well in a worktree attached to a bare repository.
* ds/sparse-checkout-requires-per-worktree-config:
config: make git_configset_get_string_tmp() private
worktree: copy sparse-checkout patterns and config on add
sparse-checkout: set worktree-config correctly
config: add repo_config_set_worktree_gently()
worktree: create init_worktree_config()
Documentation: add extensions.worktreeConfig details
|
|
`git sparse-checkout set/init` enables worktree-specific
configuration[*] by setting extensions.worktreeConfig=true, but neglects
to perform the additional necessary bookkeeping of relocating
`core.bare=true` and `core.worktree` from $GIT_COMMON_DIR/config to
$GIT_COMMON_DIR/config.worktree, as documented in git-worktree.txt. As a
result of this oversight, these settings, which are nonsensical for
secondary worktrees, can cause Git commands to incorrectly consider a
worktree bare (in the case of `core.bare`) or operate on the wrong
worktree (in the case of `core.worktree`). Fix this problem by taking
advantage of the recently-added init_worktree_config() which enables
`extensions.worktreeConfig` and takes care of necessary bookkeeping.
While at it, for backward-compatibility reasons, also stop upgrading the
repository format to "1" since doing so is (unintentionally) not
required to take advantage of `extensions.worktreeConfig`, as explained
by 11664196ac ("Revert "check_repository_format_gently(): refuse
extensions for old repositories"", 2020-07-15).
[*] The main reason to use worktree-specific config for the
sparse-checkout builtin was to avoid enabling sparse-checkout patterns
in one and causing a loss of files in another. If a worktree does not
have a sparse-checkout patterns file, then the sparse-checkout logic
will not kick in on that worktree.
Reported-by: Sean Allred <allred.sean@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 6e773527b6b (sparse-index: convert from full to sparse, 2021-03-30),
we introduced initial support for a sparse index, and were careful to
avoid converting to a sparse index in the presence of a split index.
However, when we _just_ read a freshly-initialized index, it might not
contain a split index even if _writing_ it will add one by virtue of
being asked for via the `GIT_TEST_SPLIT_INDEX` variable.
We did not notice any problems with checking _only_ for `split_index`
(and not `GIT_TEST_SPLIT_INDEX`) right until both
`vd/sparse-sparsity-fix-on-read` _and_ `vd/sparse-reset` were merged.
Those two topics' interplay triggers a bug in conjunction with running
t1091.15 when `GIT_TEST_SPLIT_INDEX=true` in the following way:
`vd/sparse-sparsity-fix-on-read` ensures that the index is made sparse
right after reading, and `vd/sparse-reset` ensures that the index is
made non-sparse again unless running in the `--soft` mode. Since the
split index feature is incompatible with the sparse index feature, we
see a symptom like this:
fatal: position for replacement 4 exceeds base index size 4
Let's fix this by avoiding the conversion to a sparse index when
`GIT_TEST_SPLIT_INDEX=true`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Trying to clear the skip-worktree bit from files that are present does
present some computational overhead, for sparse-checkouts. (We do not
do the bit clearing in non-sparse-checkouts.) Optimize it as follows:
Rather than lstat()'ing every SKIP_WORKTREE path, take advantage of the
fact that entire directories will often be missing, especially for cone
mode and even more so ever since commit 55dfcf9591 ("sparse-checkout:
clear tracked sparse dirs", 2021-09-08). If we have already determined
that the parent directory of a file (or other previous ancestor) does
not exist, then the file cannot exist either so we do not need to
lstat() it separately.
Timings for p2000 included below, reformatted to fit in normal commit
message line lengths, which compare three things:
* Timings before this series
* Timings of the unoptimized version of
clear_skip_worktree_from_present_files() from a few commits ago
* Timings after the optimization in this commit
(NOTE: t/perf/ appears to have timing resolution only down to 0.01 s,
which presents significant measurement error when timings only differ by
0.01s. I don't trust any such timings below, and yet all the optimized
results differ by at most 0.01s.)
Test Before Series Unoptimized Optimized
-----------------------------------------------------------------------------
*git status*
full-v3 0.15(0.10+0.06) 0.32(0.16+0.17) +113.3% 0.16(0.10+0.07) +6.7%
full-v4 0.15(0.11+0.05) 0.32(0.17+0.16) +113.3% 0.16(0.11+0.05) +6.7%
sparse-v3 0.04(0.03+0.04) 0.04(0.02+0.05) +0.0% 0.04(0.02+0.05) +0.0%
sparse-v4 0.04(0.03+0.04) 0.04(0.02+0.05) +0.0% 0.04(0.03+0.05) +0.0%
*git add -A*
full-v3 0.40(0.30+0.07) 0.56(0.36+0.17) +40.0% 0.39(0.30+0.07) -2.5%
full-v4 0.37(0.28+0.07) 0.54(0.37+0.16) +45.9% 0.38(0.29+0.07) +2.7%
sparse-v3 0.06(0.04+0.05) 0.08(0.05+0.05) +33.3% 0.06(0.05+0.04) +0.0%
sparse-v4 0.05(0.03+0.05) 0.05(0.04+0.04) +0.0% 0.06(0.04+0.05) +20.0%
*git add .*
full-v3 0.40(0.31+0.07) 0.57(0.37+0.17) +42.5% 0.41(0.30+0.08) +2.5%
full-v4 0.38(0.30+0.06) 0.55(0.37+0.16) +44.7% 0.38(0.30+0.06) +0.0%
sparse-v3 0.06(0.04+0.05) 0.06(0.05+0.04) +0.0% 0.06(0.03+0.05) +0.0%
sparse-v4 0.06(0.05+0.05) 0.06(0.04+0.05) +0.0% 0.06(0.04+0.06) +0.0%
*git commit -a -m A*
full-v3 0.41(0.32+0.06) 0.58(0.39+0.17) +41.5% 0.42(0.32+0.07) +2.4%
full-v4 0.39(0.30+0.07) 0.56(0.38+0.17) +43.6% 0.40(0.31+0.07) +2.6%
sparse-v3 0.04(0.03+0.04) 0.04(0.03+0.04) +0.0% 0.04(0.03+0.04) +0.0%
sparse-v4 0.04(0.03+0.05) 0.04(0.03+0.05) +0.0% 0.04(0.03+0.04) +0.0%
*git checkout -f -*
full-v3 0.56(0.46+0.07) 0.73(0.55+0.16) +30.4% 0.57(0.47+0.08) +1.8%
full-v4 0.54(0.45+0.07) 0.71(0.53+0.17) +31.5% 0.55(0.45+0.07) +1.9%
sparse-v3 0.06(0.04+0.04) 0.06(0.04+0.05) +0.0% 0.06(0.04+0.05) +0.0%
sparse-v4 0.05(0.05+0.04) 0.05(0.04+0.05) +0.0% 0.06(0.04+0.05) +20.0%
*git reset*
full-v3 0.34(0.26+0.05) 0.51(0.34+0.15) +50.0% 0.34(0.26+0.06) +0.0%
full-v4 0.32(0.24+0.06) 0.49(0.32+0.15) +53.1% 0.33(0.25+0.06) +3.1%
sparse-v3 0.04(0.03+0.04) 0.04(0.03+0.04) +0.0% 0.04(0.03+0.04) +0.0%
sparse-v4 0.03(0.03+0.04) 0.03(0.02+0.04) +0.0% 0.03(0.03+0.04) +0.0%
*git reset --hard*
full-v3 0.57(0.46+0.07) 0.90(0.61+0.25) +57.9% 0.57(0.45+0.08) +0.0%
full-v4 0.54(0.46+0.05) 0.88(0.59+0.26) +63.0% 0.55(0.45+0.07) +1.9%
sparse-v3 0.07(0.03+0.03) 0.07(0.04+0.03) +0.0% 0.07(0.03+0.03) +0.0%
sparse-v4 0.06(0.03+0.03) 0.06(0.04+0.02) +0.0% 0.06(0.03+0.03) +0.0%
*git reset -- does-not-exist*
full-v3 0.35(0.27+0.06) 0.52(0.32+0.17) +48.6% 0.35(0.27+0.06) +0.0%
full-v4 0.33(0.26+0.05) 0.50(0.33+0.15) +51.5% 0.33(0.26+0.06) +0.0%
sparse-v3 0.04(0.03+0.04) 0.04(0.03+0.04) +0.0% 0.04(0.03+0.04) +0.0%
sparse-v4 0.04(0.02+0.04) 0.03(0.02+0.04) -25.0% 0.03(0.02+0.04) -25.0%
*git diff*
full-v3 0.07(0.04+0.04) 0.24(0.11+0.14) +242.9% 0.07(0.04+0.04) +0.0%
full-v4 0.07(0.03+0.05) 0.24(0.13+0.12) +242.9% 0.08(0.04+0.05) +14.3%
sparse-v3 0.02(0.01+0.04) 0.02(0.01+0.04) +0.0% 0.02(0.01+0.05) +0.0%
sparse-v4 0.02(0.02+0.03) 0.02(0.01+0.04) +0.0% 0.02(0.01+0.04) +0.0%
*git diff --cached*
full-v3 0.05(0.03+0.02) 0.22(0.12+0.09) +340.0% 0.05(0.03+0.01) +0.0%
full-v4 0.05(0.03+0.01) 0.23(0.12+0.11) +360.0% 0.05(0.03+0.02) +0.0%
sparse-v3 0.01(0.00+0.00) 0.01(0.00+0.00) +0.0% 0.01(0.00+0.00) +0.0%
sparse-v4 0.01(0.00+0.00) 0.01(0.00+0.00) +0.0% 0.01(0.00+0.00) +0.0%
*git blame f2/f4/a*
full-v3 0.18(0.13+0.05) 0.52(0.29+0.23) +188.9% 0.19(0.15+0.04) +5.6%
full-v4 0.19(0.15+0.04) 0.52(0.28+0.23) +173.7% 0.19(0.14+0.04) +0.0%
sparse-v3 0.10(0.08+0.02) 0.10(0.09+0.01) +0.0% 0.10(0.09+0.01) +0.0%
sparse-v4 0.10(0.08+0.02) 0.10(0.08+0.02) +0.0% 0.10(0.08+0.02) +0.0%
*git blame f2/f4/f3/a*
full-v3 0.45(0.36+0.08) 0.78(0.51+0.27) +73.3% 0.45(0.37+0.08) +0.0%
full-v4 0.45(0.37+0.08) 0.78(0.51+0.26) +73.3% 0.45(0.37+0.08) +0.0%
sparse-v3 0.36(0.32+0.04) 0.36(0.31+0.05) +0.0% 0.36(0.31+0.04) +0.0%
sparse-v4 0.36(0.31+0.05) 0.36(0.31+0.05) +0.0% 0.36(0.31+0.04) +0.0%
*git checkout-index -f --all*
full-v3 0.07(0.02+0.05) 0.24(0.12+0.12) +242.9% 0.08(0.04+0.04) +14.3%
full-v4 0.07(0.03+0.04) 0.24(0.11+0.13) +242.9% 0.08(0.03+0.04) +14.3%
sparse-v3 0.04(0.01+0.03) 0.04(0.00+0.03) +0.0% 0.04(0.01+0.03) +0.0%
sparse-v4 0.04(0.01+0.02) 0.04(0.01+0.03) +0.0% 0.04(0.01+0.02) +0.0%
*git update-index --add --remove f2/f4/a*
full-v3 0.29(0.23+0.02) 0.46(0.30+0.12) +58.6% 0.30(0.24+0.02) +3.4%
full-v4 0.27(0.22+0.02) 0.45(0.29+0.12) +66.7% 0.28(0.22+0.03) +3.7%
sparse-v3 0.02(0.02+0.00) 0.02(0.01+0.00) +0.0% 0.02(0.01+0.00) +0.0%
sparse-v4 0.02(0.02+0.00) 0.02(0.02+0.00) +0.0% 0.02(0.02+0.00) +0.0%
So, with the optimization, the extra work appears to be essentially 0
for sparse-checkouts that are also using sparse-indexes (even before my
optimization), and the extra work appears to be just marginally more
than 0 for sparse-checkouts that are using full indexes.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fix is short (~30 lines), but the description is not. Sorry.
There is a set of problems caused by files in what I'll refer to as the
"present-despite-SKIP_WORKTREE" state. This commit aims to not just fix
these problems, but remove the entire class as a possibility -- for
those using sparse checkouts. But first, we need to understand the
problems this class presents. A quick outline:
* Problems
* User facing issues
* Problem space complexity
* Maintenance and code correctness challenges
* SKIP_WORKTREE expectations in Git
* Suggested solution
* Pros/Cons of suggested solution
* Notes on testcase modifications
=== User facing issues ===
There are various ways for users to get files to be present in the
working copy despite having the SKIP_WORKTREE bit set for that file in
the index. This may come from:
* various git commands not really supporting the SKIP_WORKTREE bit[1,2]
* users grabbing files from elsewhere and writing them to the worktree
(perhaps even cached in their editor)
* users attempting to "abort" a sparse-checkout operation with a
not-so-early Ctrl+C (updating $GIT_DIR/info/sparse-checkout and the
working tree is not atomic)[3].
Once users have present-despite-SKIP_WORKTREE files, any modifications
users make to these files will be ignored, possibly to users' confusion.
Further:
* these files will degrade performance for the sparse-index case due
to requiring the index to be expanded (see commit 55dfcf9591
("sparse-checkout: clear tracked sparse dirs", 2021-09-08) for why
we try to delete entire directories outside the sparse cone).
* these files will not be updated by by standard commands
(switch/checkout/pull/merge/rebase will leave them alone unless
conflicts happen -- and even then, the conflicted file may be
written somewhere else to avoid overwriting the SKIP_WORKTREE file
that is present and in the way)
* there is nothing in Git that users can use to discover such
files (status, diff, grep, etc. all ignore it)
* there is no reasonable mechanism to "recover" from such a condition
(neither `git sparse-checkout reapply` nor `git reset --hard` will
correct it).
So, not only are users modifications ignored, but the files get
progressively more stale over time. At some point in the future, they
may change their sparseness specification or disable sparse-checkouts.
At that time, all present-despite-SKIP_WORKTREE files will show up as
having lots of modifications because they represent a version from a
different branch or commit. These might include user-made local changes
from days before, but the only way to tell is to have users look through
them all closely.
If these users come to others for help, there will be no logs that
explain the issue; it's just a mysterious list of changes. Users might
adamantly claim (correctly, as it turns out) that they didn't modify
these files, while others presume they did.
[1] https://lore.kernel.org/git/xmqqbmb1a7ga.fsf@gitster-ct.c.googlers.com/
[2] https://lore.kernel.org/git/CABPp-BH9tju7WVm=QZDOvaMDdZbpNXrVWQdN-jmfN8wC6YVhmw@mail.gmail.com/
[3] https://lore.kernel.org/git/CABPp-BFnFpzwGC11TLoLs8YK5yiisA5D5-fFjXnJsbESVDwZsA@mail.gmail.com/
=== Problem space complexity ===
SKIP_WORKTREE has been part of Git for over a decade. Duy did lots of
work on it initially, and several others have since come along and put
lots of work into it. Stolee spent most of 2021 on the sparse-index,
with lots of bugfixes along the way including to non-sparse-index cases
as we are still trying to get sparse checkouts to behave reasonably.
Basically every codepath throughout the treat needs to be aware of an
additional type of file: tracked-but-not-present. The extra type
results in lots of extra testcases and lots of extra code everywhere.
But, the sad thing is that we actually have more than one extra type.
We have tracked, tracked-but-not-present (SKIP_WORKTREE), and
tracked-but-promised-to-not-be-present-but-is-present-anyway
(present-despite-SKIP_WORKTREE). Two types is a monumental amount of
effort to support, and adding a third feels a bit like insanity[4].
[4] Some examples of which can be seen at
https://lore.kernel.org/git/CABPp-BGJ_Nvi5TmgriD9Bh6eNXE2EDq2f8e8QKXAeYG3BxZafA@mail.gmail.com/
=== Maintenance and code correctness challenges ===
Matheus' patches to grep stalled for nearly a year, in part because of
complications of how to handle sparse-checkouts appropriately in all
cases[5][6] (with trying to sanely figure out how to sanely handle
present-despite-SKIP_WORKTREE files being one of the complications).
His rm/add follow-ups also took months because of those kinds of
issues[7]. The corner cases with things like submodules and
SKIP_WORKTREE with the addition of present-despite-SKIP_WORKTREE start
becoming really complex[8].
We've had to add ugly logic to merge-ort to attempt to handle
present-despite-SKIP_WORKTREE files[9], and basically just been forced
to give up in merge-recursive knowing full well that we'll sometimes
silently discard user modifications. Despite stash essentially being a
merge, it needed extra code (beyond what was in merge-ort and
merge-recursive) to manually tweak SKIP_WORKTREE bits in order to avoid
a few different bugs that'd result in an early abort with a partial
stash application[10].
[5] See https://lore.kernel.org/git/5f3f7ac77039d41d1692ceae4b0c5df3bb45b74a.1612901326.git.matheus.bernardino@usp.br/#t
and the dates on the thread; also Matheus and I had several
conversations off-list trying to resolve the issues over that time
[6] ...it finally kind of got unstuck after
https://lore.kernel.org/git/CABPp-BGJ_Nvi5TmgriD9Bh6eNXE2EDq2f8e8QKXAeYG3BxZafA@mail.gmail.com/
[7] See for example
https://lore.kernel.org/git/CABPp-BHwNoVnooqDFPAsZxBT9aR5Dwk5D9sDRCvYSb8akxAJgA@mail.gmail.com/#t
and quotes like "The core functionality of sparse-checkout has always
been only partially implemented", a statement I still believe is true
today.
[8] https://lore.kernel.org/git/pull.809.git.git.1592356884310.gitgitgadget@gmail.com/
[9] See commit 66b209b86a ("merge-ort: implement CE_SKIP_WORKTREE
handling with conflicted entries", 2021-03-20)
[10] See commit ba359fd507 ("stash: fix stash application in
sparse-checkouts", 2020-12-01)
=== SKIP_WORKTREE expectations in Git ===
A couple quotes:
* From [11] (before the "sparse-checkout" command existed):
If it needs too many special cases, hacks, and conditionals, then it
is not worth the complexity---if it is easier to write a correct code
by allowing Git to populate working tree files, it is perfectly fine
to do so.
In a sense, the sparse checkout "feature" itself is a hack by itself,
and that is why I think this part should be "best effort" as well.
* From the git-sparse-checkout manual (still present today):
THIS COMMAND IS EXPERIMENTAL. ITS BEHAVIOR, AND THE BEHAVIOR OF OTHER
COMMANDS IN THE PRESENCE OF SPARSE-CHECKOUTS, WILL LIKELY CHANGE IN
THE FUTURE.
[11] https://lore.kernel.org/git/xmqqbmb1a7ga.fsf@gitster-ct.c.googlers.com/
=== Suggested solution ===
SKIP_WORKTREE was written to allow sparse-checkouts, in particular, as
the name of the option implies, to allow the file to NOT be in the
worktree but consider it to be unchanged rather than deleted.
The suggests a simple solution: present-despite-SKIP_WORKTREE files
should not exist, for those using sparse-checkouts.
Enforce this at index loading time by checking if core.sparseCheckout is
true; if so, check files in the index with the SKIP_WORKTREE bit set to
verify that they are absent from the working tree. If they are present,
unset the bit (in memory, though any commands that write to the index
will record the update).
Users can, of course, can get the SKIP_WORKTREE bit back such as by
running `git sparse-checkout reapply` (if they have ensured the file is
unmodified and doesn't match the specified sparsity patterns).
=== Pros/Cons of suggested solution ===
Pros:
* Solves the user visible problems reported above, which I've been
complaining about for nearly a year but couldn't find a solution to.
* Helps prevent slow performance degradation with a sparse-index.
* Much easier behavior in sparse-checkouts for users to reason about
* Very simple, ~30 lines of code.
* Significantly simplifies some ugly testcases, and obviates the need
to test an entire class of potential issues.
* Reduces code complexity, reasoning, and maintenance. Avoids
disagreements about weird corner cases[12].
* It has been reported that some users might be (ab)using
SKIP_WORKTREE as a let-me-modify-but-keep-the-file-in-the-worktree
mechanism[13, and a few other similar references]. These users know
of multiple caveats and shortcomings in doing so; perhaps not
surprising given the "SKIP_WORKTREE expecations" section above.
However, these users use `git update-index --skip-worktree`, and not
`git sparse-checkout` or core.sparseCheckout=true. As such, these
users would be unaffected by this change and can continue abusing
the system as before.
[12] https://lore.kernel.org/git/CABPp-BH9tju7WVm=QZDOvaMDdZbpNXrVWQdN-jmfN8wC6YVhmw@mail.gmail.com/
[13] https://stackoverflow.com/questions/13630849/git-difference-between-assume-unchanged-and-skip-worktree
Cons:
* When core.sparseCheckout is enabled, this adds a performance cost to
reading the index. I'll defer discussion of this cost to a subsequent
patch, since I have some optimizations to add.
=== Notes on testcase modifications ===
The good:
* t1011: Compare to two cases above it ('read-tree will not throw away
dirty changes, non-sparse'); since the file is present, it should
match the non-sparse case now
* t1092: sparse-index & sparse-checkout now match full-worktree
behavior in more cases! Yaay for consistency!
* t6428, t7012: look at how much simpler the tests become! Merge and
stash can just fail early telling the user there's a file in the
way, instead of not noticing until it's about to write a file and
then have to implement sudden crash avoidance. Hurray for sanity!
* t7817: sparse behavior better matches full tree behavior. Hurray
for sanity!
The confusing:
* t3705: These changes were ONLY needed on Windows, but they don't
hurt other platforms. Let's discuss each individually:
* core.sparseCheckout should be false by default. Nothing in this
testcase toggles that until many, many tests later. However,
early tests (#5 in particular) were testing `update-index
--skip-worktree` behavior in a non-sparse-checkout, but the
Windows tests in CI were behaving as if core.sparseCheckout=true
had been specified somewhere. I do not have access to a Windows
machine. But I just manually did what should have been a no-op
and turned the config off. And it fixed the test.
* I have no idea why the leftover .gitattributes file from this
test was causing failures for test #18 on Windows, but only with
these changes of mine. Test #18 was checking for empty stderr,
and specifically wanted to know that some error completely
unrelated to file endings did not appear. The leftover
.gitattributes file thus caused some spurious stderr unrelated to
the thing being checked. Since other tests did not intend to
test normalization, just proactively remove the .gitattributes
file. I'm certain this is cleaner and better, I'm just unsure
why/how this didn't trigger problems before.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The `ensure_correct_sparsity` function is intended to provide a means of
aligning the in-core index with the sparsity required by the repository
settings and other properties of the index. The function first checks
whether a sparse index is allowed (per repository & sparse checkout pattern
settings). If the sparse index may be used, the index is converted to
sparse; otherwise, it is explicitly expanded with `ensure_full_index`.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When converting a full index to sparse, clear and recreate the cache tree
only if the cache tree is not fully valid. The convert_to_sparse operation
should exit silently if a cache tree update cannot be successfully completed
(e.g., due to a conflicted entry state). However, because this failure
scenario only occurs when at least a portion of the cache tree is invalid,
we can save ourselves the cost of clearing and recreating the cache tree by
skipping the check when the cache tree is fully valid.
Helped-by: Derrick Stolee <dstolee@microsoft.com>
Co-authored-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In cone mode, the sparse-index code path learned to remove ignored
files (like build artifacts) outside the sparse cone, allowing the
entire directory outside the sparse cone to be removed, which is
especially useful when the sparse patterns change.
* ds/sparse-index-ignored-files:
sparse-checkout: clear tracked sparse dirs
sparse-index: add SPARSE_INDEX_MEMORY_ONLY flag
attr: be careful about sparse directories
sparse-checkout: create helper methods
sparse-index: use WRITE_TREE_MISSING_OK
sparse-index: silently return when cache tree fails
unpack-trees: fix nested sparse-dir search
sparse-index: silently return when not using cone-mode patterns
t7519: rewrite sparse index test
|
|
The convert_to_sparse() method checks for the GIT_TEST_SPARSE_INDEX
environment variable or the "index.sparse" config setting before
converting the index to a sparse one. This is for ease of use since all
current consumers are preparing to compress the index before writing it
to disk. If these settings are not enabled, then convert_to_sparse()
silently returns without doing anything.
We will add a consumer in the next change that wants to use the sparse
index as an in-memory data structure, regardless of whether the on-disk
format should be sparse.
To that end, create the SPARSE_INDEX_MEMORY_ONLY flag that will skip
these config checks when enabled. All current consumers are modified to
pass '0' in the new 'flags' parameter.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we integrate the sparse index into more builtins, we occasionally
need to check the sparse-checkout patterns to see if a path is within
the sparse-checkout cone. Create some helper methods that help
initialize the patterns and check for pattern matching to make this
easier.
The existing callers of commands like get_sparse_checkout_patterns() use
a custom 'struct pattern_list' that is not necessarily the one in the
'struct index_state', so there are not many previous uses that could
adopt these helpers. There are just two in builtin/add.c and
sparse-index.c that can use path_in_sparse_checkout().
We add a path_in_cone_mode_sparse_checkout() as well that will only
return false if the path is outside of the sparse-checkout definition
_and_ the sparse-checkout patterns are in cone mode.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When updating the cache tree in convert_to_sparse(), the
WRITE_TREE_MISSING_OK flag indicates that trees might be computed that
do not already exist within the object database. This happens in cases
such as 'git add' creating new trees that it wants to store in
anticipation of a following 'git commit'. If this flag is not specified,
then it might trigger a promisor fetch or a failure due to the object
not existing locally.
Use WRITE_TREE_MISSING_OK during convert_to_sparse() to avoid these
possible reasons for the cache_tree_update() to fail.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If cache_tree_update() returns a non-zero value, then it could not
create the cache tree. This is likely due to a path having a merge
conflict. Since we are already returning early, let's return silently to
avoid making it seem like we failed to write the index at all.
If we remove our dependence on the cache tree within
convert_to_sparse(), then we could still recover from this scenario and
have a sparse index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
While the sparse-index is only enabled when core.sparseCheckoutCone is
also enabled, it is possible for the user to modify the sparse-checkout
file manually in a way that does not match cone-mode patterns. In this
case, we should refuse to convert an index into a sparse index, since
the sparse_checkout_patterns will not be initialized with recursive and
parent path hashsets.
Also silently return if there are no cache entries, which is a simple
case: there are no paths to make sparse!
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Copy the 'index_state->dir_hash' back to the real istate after expanding
a sparse index.
A crash was observed in 'git status' during some hashmap lookups with
corrupted hashmap entries. During an index expansion, new cache-entries
are added to the 'index_state->name_hash' and the 'dir_hash' in a
temporary 'index_state' variable 'full'. However, only the 'name_hash'
hashmap from this temp variable was copied back into the real 'istate'
variable. The original copy of the 'dir_hash' was incorrectly
preserved. If the table in the 'full->dir_hash' hashmap were realloced,
the stale version (in 'istate') would be corrupted.
The test suite does not operate on index sizes sufficiently large to
trigger this reallocation, so they do not cover this behavior.
Increasing the test suite to cover such scale is fragile and likely
wasteful.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When some commands run with command_requires_full_index=1, then the
index can get in a state where the in-memory cache tree is actually
equal to the sparse index's cache tree instead of the full one.
This results in incorrect entry_count values. By clearing the cache
tree before converting to sparse, we avoid this issue.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we need to expand a sparse-index into a full one, then the FS Monitor
bitmap is going to be incorrect. Ensure that we start fresh at such an
event.
While this is currently a performance drawback, the eventual hope of the
sparse-index feature is that these expansions will be rare and hence we
will be able to keep the FS Monitor data accurate across multiple Git
commands.
These tests are added to demonstrate that the behavior is the same
across a full index and a sparse index, but also that file modifications
to a tracked directory outside of the sparse cone will trigger
ensure_full_index().
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When creating a full index from a sparse one, we create cache entries
for every blob within a given sparse directory entry. These are
correctly marked with the CE_SKIP_WORKTREE flag, but the CE_EXTENDED
flag is not included. The CE_EXTENDED flag would exist if we loaded a
full index from disk with these entries marked with CE_SKIP_WORKTREE, so
we can add the flag here to be consistent. This allows us to directly
compare the flags present in cache entries when testing the sparse-index
feature, but has no significance to its correctness in the user-facing
functionality.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sparse-index format is designed to be compatible with merge
conflicts, even those outside the sparse-checkout definition. The reason
is that when converting a full index to a sparse one, a cache entry with
nonzero stage will not be collapsed into a sparse directory entry.
However, this behavior was not tested, and a different behavior within
convert_to_sparse() fails in this scenario. Specifically,
cache_tree_update() will fail when unmerged entries exist.
convert_to_sparse_rec() uses the cache-tree data to recursively walk the
tree structure, but also to compute the OIDs used in the
sparse-directory entries.
Add an index scan to convert_to_sparse() that will detect if these merge
conflict entries exist and skip the conversion before trying to update
the cache-tree. This is marked as NEEDSWORK because this can be removed
with a suitable update to cache_tree_update() or a similar method that
can construct a cache-tree with invalid nodes, but still allow creating
the nodes necessary for creating sparse directory entries.
It is possible that in the future we will not need to make such an
update, since if we do not expand a sparse-index into a full one, this
conversion does not need to happen. Thus, this can be deferred until the
merge machinery is made to integrate with the sparse-index.
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix access to uninitialized piece of memory, introduced during this
cycle.
* ds/sparse-index-protections:
sparse-index: fix uninitialized jump
|
|
While testing the sparse-index, I verified a test with --valgrind and it
complained about an uninitialized value being used in a jump in the
path_matches_pattern_list() method. The line was this one:
if (*dtype == DT_UNKNOWN)
In the call stack, the culprit was the initialization of the dtype
variable in convert_to_sparse_rec().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the set_index_sparse_config() function by folding it into
set_sparse_index_config(), which was its only user.
Since 122ba1f7b52 (sparse-checkout: toggle sparse index from builtin,
2021-03-30) the flow of this code hasn't made much sense, we'd get
"enabled" in set_sparse_index_config(), proceed to call
set_index_sparse_config() with it.
There we'd call prepare_repo_settings() and set
"repo->settings.sparse_index = 1", only to needlessly call
prepare_repo_settings() again in set_sparse_index_config() (where it
would early abort), and finally setting "repo->settings.sparse_index =
enabled".
Instead we can just call prepare_repo_settings() once, and set the
variable to "enabled" in the first place.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some users of the index API have a specific path they are looking for,
but choose to use index_file_exists() to rely on the name-hash hashtable
instead of doing binary search with index_name_pos(). These users only
need to know a yes/no answer, not a position within the cache array.
When the index is sparse, the name-hash hash table does not contain the
full list of paths within sparse directories. It _does_ contain the
directory names for the sparse-directory entries.
Create a helper function, expand_to_path(), for intended use with the
name-hash hashtable functions. The integration with name-hash.c will
follow in a later change.
The solution here is to use ensure_full_index() when we determine that
the requested path is within a sparse directory entry. This will
populate the name-hash hashtable as the index is recomputed from
scratch.
There may be cases where the caller is trying to find an untracked path
that is not in the index but also is not within a sparse directory
entry. We want to minimize the overhead for these requests. If we used
index_name_pos() to find the insertion order of the path, then we could
determine from that position if a sparse-directory exists. (In fact,
just calling index_name_pos() in that case would lead to expanding the
index to a full index.) However, this takes O(log N) time where N is the
number of cache entries.
To keep the performance of this call based mostly on the input string,
use index_file_exists() to look for the ancestors of the path. Using the
heuristic that a sparse directory is likely to have a small number of
parent directories, we start from the bottom and build up. Use a string
buffer to allow mutating the path name to terminate after each slash for
each hashset test.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The cache-tree extension was previously disabled with sparse indexes.
However, the cache-tree is an important performance feature for commands
like 'git status' and 'git add'. Integrate it with sparse directory
entries.
When writing a sparse index, completely clear and recalculate the cache
tree. By starting from scratch, the only integration necessary is to
check if we hit a sparse directory entry and create a leaf of the
cache-tree that has an entry_count of one and no subtrees.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The sparse index extension is used to signal that index writes should be
in sparse mode. This was only updated using GIT_TEST_SPARSE_INDEX=1.
Add a '--[no-]sparse-index' option to 'git sparse-checkout init' that
specifies if the sparse index should be used. It also updates the index
to use the correct format, either way. Add a warning in the
documentation that the use of a repository extension might reduce
compatibility with third-party tools. 'git sparse-checkout init' already
sets extension.worktreeConfig, which places most sparse-checkout users
outside of the scope of most third-party tools.
Update t1092-sparse-checkout-compatibility.sh to use this CLI instead of
GIT_TEST_SPARSE_INDEX=1.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When enabled, this config option signals that index writes should
attempt to use sparse-directory entries.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A submodule is stored as a "Git link" that actually points to a commit
within a submodule. Submodules are populated or not depending on
submodule configuration, not sparse-checkout. To ensure that the
sparse-index feature integrates correctly with submodules, we should not
collapse a directory if there is a Git link within its range.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we have a full index, then we can convert it to a sparse index by
replacing directories outside of the sparse cone with sparse directory
entries. The convert_to_sparse() method does this, when the situation is
appropriate.
For now, we avoid converting the index to a sparse index if:
1. the index is split.
2. the index is already sparse.
3. sparse-checkout is disabled.
4. sparse-checkout does not use cone mode.
Finally, we currently limit the conversion to when the
GIT_TEST_SPARSE_INDEX environment variable is enabled. A mode using Git
config will be added in a later change.
The trickiest thing about this conversion is that we might not be able
to mark a directory as a sparse directory just because it is outside the
sparse cone. There might be unmerged files within that directory, so we
need to look for those. Also, if there is some strange reason why a file
is not marked with CE_SKIP_WORKTREE, then we should give up on
converting that directory. There is still hope that some of its
subdirectories might be able to convert to sparse, so we keep looking
deeper.
The conversion process is assisted by the cache-tree extension. This is
calculated from the full index if it does not already exist. We then
abandon the cache-tree as it no longer applies to the newly-sparse
index. Thus, this cache-tree will be recalculated in every
sparse-full-sparse round-trip until we integrate the cache-tree
extension with the sparse index.
Some Git commands use the index after writing it. For example, 'git add'
will update the index, then write it to disk, then read its entries to
report information. To keep the in-memory index in a full state after
writing, we re-expand it to a full one after the write. This is wasteful
for commands that only write the index and do not read from it again,
but that is only the case until we make those commands "sparse aware."
We can compare the behavior of the sparse-index in
t1092-sparse-checkout-compability.sh by using GIT_TEST_SPARSE_INDEX=1
when operating on the 'sparse-index' repo. We can also compare the two
sparse repos directly, such as comparing their indexes (when expanded to
full in the case of the 'sparse-index' repo). We also verify that the
index is actually populated with sparse directory entries.
The 'checkout and reset (mixed)' test is marked for failure when
comparing a sparse repo to a full repo, but we can compare the two
sparse-checkout cases directly to ensure that we are not changing the
behavior when using a sparse index.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We will mark an in-memory index_state as having sparse directory entries
with the sparse_index bit. These currently cannot exist, but we will add
a mechanism for collapsing a full index to a sparse one in a later
change. That will happen at write time, so we must first allow parsing
the format before writing it.
Commands or methods that require a full index in order to operate can
call ensure_full_index() to expand that index in-memory. This requires
parsing trees using that index's repository.
Sparse directory entries have a specific 'ce_mode' value. The macro
S_ISSPARSEDIR(ce->ce_mode) can check if a cache_entry 'ce' has this type.
This ce_mode is not possible with the existing index formats, so we don't
also verify all properties of a sparse-directory entry, which are:
1. ce->ce_mode == 0040000
2. ce->flags & CE_SKIP_WORKTREE is true
3. ce->name[ce->namelen - 1] == '/' (ends in dir separator)
4. ce->oid references a tree object.
These are all semi-enforced in ensure_full_index() to some extent. Any
deviation will cause a warning at minimum or a failure in the worst
case.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Upcoming changes will introduce modifications to the index format that
allow sparse directories. It will be useful to have a mechanism for
converting those sparse index files into full indexes by walking the
tree at those sparse directories. Name this method ensure_full_index()
as it will guarantee that the index is fully expanded.
This method is not implemented yet, and instead we focus on the
scaffolding to declare it and call it at the appropriate time.
Add a 'command_requires_full_index' member to struct repo_settings. This
will be an indicator that we need the index in full mode to do certain
index operations. This starts as being true for every command, then we
will set it to false as some commands integrate with sparse indexes.
If 'command_requires_full_index' is true, then we will immediately
expand a sparse index to a full one upon reading from disk. This
suffices for now, but we will want to add more callers to
ensure_full_index() later.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
