| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add support for GitLab CI.
* ps/ci-gitlab:
ci: add support for GitLab CI
ci: install test dependencies for linux-musl
ci: squelch warnings when testing with unusable Git repo
ci: unify setup of some environment variables
ci: split out logic to set up failed test artifacts
ci: group installation of Docker dependencies
ci: make grouping setup more generic
ci: reorder definitions for grouping functions
|
|
In order to set up the Apache httpd server, we need to locate both the
httpd binary and its default module path. This is done with a hardcoded
list of locations that we scan. While this works okayish with distros
that more-or-less follow the Filesystem Hierarchy Standard, it falls
apart on others like NixOS that don't.
While it is possible to specify these paths via `LIB_HTTPD_PATH` and
`LIB_HTTPD_MODULE_PATH`, it is not a nice experience for the developer
to figure out how to set those up. And in fact we can do better by
dynamically detecting both httpd and its module path at runtime:
- The httpd binary can be located via PATH.
- The module directory can (in many cases) be derived via the
`HTTPD_ROOT` compile-time variable.
Amend the code to do so.
Note that the new runtime-detected paths will only be used as a fallback
in case none of the hardcoded paths are usable. For the PATH lookup this
is because httpd is typically installed into "/usr/sbin", which is often
not included in the user's PATH variable. And the module path detection
relies on a configured httpd installation and may thus not work in all
cases, either.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The linux-musl CI job executes tests on Alpine Linux, which is based on
musl libc instead of glibc. We're missing some test dependencies though,
which causes us to skip a subset of tests.
Install these test dependencies to increase our test coverage on this
platform. There are still some missing test dependecies, but these do
not have a corresponding package in the Alpine repositories:
- p4 and p4d, both parts of the Perforce version control system.
- cvsps, which generates patch sets for CVS.
- Subversion and the SVN::Core Perl library, the latter of which is
not available in the Alpine repositories. While the tool itself is
available, all Subversion-related tests are skipped without the
SVN::Core Perl library anyway.
The Apache2-based tests require a bit more care though. For one, the
module path is different on Alpine Linux, which requires us to add it to
the list of known module paths to detect it. But second, the WebDAV
module on Alpine Linux is broken because it does not bundle the default
database backend [1]. We thus need to skip the WebDAV-based tests on
Alpine Linux for now.
[1]: https://gitlab.alpinelinux.org/alpine/aports/-/issues/13112
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
They are equivalents and the former still exists, so as long as the
only change this commit makes are to rewrite test_i18ngrep to
test_grep, there won't be any new bug, even if there still are
callers of test_i18ngrep remaining in the tree, or when merged to
other topics that add new uses of test_i18ngrep.
This patch was produced more or less with
git grep -l -e 'test_i18ngrep ' 't/t[0-9][0-9][0-9][0-9]-*.sh' |
xargs perl -p -i -e 's/test_i18ngrep /test_grep /'
and a good way to sanity check the result yourself is to run the
above in a checkout of c4603c1c (test framework: further deprecate
test_i18ngrep, 2023-10-31) and compare the resulting working tree
contents with the result of applying this patch to the same commit.
You'll see that test_i18ngrep in a few t/lib-*.sh files corrected,
in addition to the manual reproduction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We started unconditionally testing with CGIPassAuth directive but
it is unavailable in older Apache that ships with CentOS 7 that has
about a year of shelf-life still left. The test has conditionally
been disabled when running with an ancient Apache. This was a fix
for a recent regression caught before the release, so no need to
mention it in the release notes.
* jk/http-test-cgipassauth-unavailable-in-older-apache:
t/lib-httpd: make CGIPassAuth support conditional
|
|
Commit 988aad99b4 (t5563: add tests for basic and anoymous HTTP access,
2023-02-27) added tests that require Apache to support the CGIPassAuth
directive, which was added in Apache 2.4.13. This is fairly old (~8
years), but recent enough that we still encounter it in the wild (e.g.,
RHEL/CentOS 7, which is not EOL until June 2024).
We can live with skipping the new tests on such a platform. But
unfortunately, since the directive is used unconditionally in our
apache.conf, it means the web server fails to start entirely, and we
cannot run other HTTP tests at all (e.g., the basic ones in t5551).
We can fix that by making the config conditional, and only triggering it
for t5563. That solves the problem for t5551 (which then ignores the
directive entirely). For t5563, we'd see apache complain in start_httpd;
with the default setting of GIT_TEST_HTTPD, we'd then skip the whole
script.
But that leaves one small problem: people may set GIT_TEST_HTTPD=1
explicitly, which instructs the tests to fail (rather than skip) when we
can't start the webserver (to avoid accidentally missing some tests).
This could be worked around by having the user manually set
GIT_SKIP_TESTS on a platform with an older Apache. But we can be a bit
friendlier by doing the version check ourselves and setting an
appropriate prereq. We'll use the (lack of) prereq to then skip the rest
of t5563. In theory we could use the prereq to skip individual tests, but
in practice this whole script depends on it.
Reported-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test clean-up.
* ab/avoid-losing-exit-codes-in-tests:
tests: don't lose misc "git" exit codes
tests: don't lose exit status with "test <op> $(git ...)"
tests: don't lose "git" exit codes in "! ( git ... | grep )"
tests: don't lose exit status with "(cd ...; test <op> $(git ...))"
t/lib-patch-mode.sh: fix ignored exit codes
auto-crlf tests: don't lose exit code in loops and outside tests
|
|
Allow information carried on the WWW-AUthenticate header to be
passed to the credential helpers.
* mc/credential-helper-www-authenticate:
credential: add WWW-Authenticate header to cred requests
http: read HTTP WWW-Authenticate response headers
t5563: add tests for basic and anoymous HTTP access
|
|
Various fix-ups on HTTP tests.
* jk/http-test-fixes:
t5559: make SSL/TLS the default
t5559: fix test failures with LIB_HTTPD_SSL
t/lib-httpd: enable HTTP/2 "h2" protocol, not just h2c
t/lib-httpd: respect $HTTPD_PROTO in expect_askpass()
t5551: drop curl trace lines without headers
t5551: handle v2 protocol in cookie test
t5551: simplify expected cookie file
t5551: handle v2 protocol in upload-pack service test
t5551: handle v2 protocol when checking curl trace
t5551: stop forcing clone to run with v0 protocol
t5551: handle HTTP/2 when checking curl trace
t5551: lower-case headers in expected curl trace
t5551: drop redundant grep for Accept-Language
t5541: simplify and move "no empty path components" test
t5541: stop marking "used receive-pack service" test as v0 only
t5541: run "used receive-pack service" test earlier
|
|
Add a test showing simple anoymous HTTP access to an unprotected
repository, that results in no credential helper invocations.
Also add a test demonstrating simple basic authentication with
simple credential helper support.
Leverage a no-parsed headers (NPH) CGI script so that we can directly
control the HTTP responses to simulate a multitude of good, bad and ugly
remote server implementations around auth.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the HTTP tests are run with LIB_HTTPD_SSL in the environment, then
we access the test server as https://. This causes expect_askpass to
complain, because it tries to blindly match "http://" in the prompt
shown to the user. We can adjust this to use $HTTPD_PROTO, which is set
during the setup phase.
Note that this is enough for t5551 and t5559 to pass when run with
https, but there are similar problems in other scripts that will need to
be fixed before the whole suite can run with LIB_HTTPD_SSL.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We do not test our http proxy functionality at all in the test suite, so
this is a pretty big blind spot. Let's at least add a basic check that
we can go through an authenticating proxy to perform a clone.
A few notes on the implementation:
- I'm using a single apache instance to proxy to itself. This seems to
work fine in practice, and we can check with a test that this rather
unusual setup is doing what we expect.
- I've put the proxy tests into their own script, and it's the only
one which loads the apache proxy config. If any platform can't
handle this (e.g., doesn't have the right modules), the start_httpd
step should fail and gracefully skip the rest of the script (but all
the other http tests in existing scripts will continue to run).
- I used a separate passwd file to make sure we don't ever get
confused between proxy and regular auth credentials. It's using the
antiquated crypt() format. This is a terrible choice security-wise
in the modern age, but it's what our existing passwd file uses, and
should be portable. It would probably be reasonable to switch both
of these to bcrypt, but we can do that in a separate patch.
- On the client side, we test two situations with credentials: when
they are present in the url, and when the username is present but we
prompt for the password. I think we should be able to handle the
case that _neither_ is present, but an HTTP 407 causes us to prompt
for them. However, this doesn't seem to work. That's either a bug,
or at the very least an opportunity for a feature, but I punted on
it for now. The point of this patch is just getting basic coverage,
and we can explore possible deficiencies later.
- this doesn't work with LIB_HTTPD_SSL. This probably would be
valuable to have, as https over an http proxy is totally different
(it uses CONNECT to tunnel the session). But adding in
mod_proxy_connect and some basic config didn't seem to work for me,
so I punted for now. Much of the rest of the test suite does not
currently work with LIB_HTTPD_SSL either, so we shouldn't be making
anything much worse here.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rewrite tests that ran "git" inside command substitution and lost the
exit status of "git" so that we notice the failing "git".
Have them use modern patterns such as a "test_cmp" of the expected
outputs instead.
We'll fix more of these these in the subsequent commit, for now we're
only converting the cases where this loss of exit code was combined
with spawning a sub-shell.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apache 2.4 has been out since early 2012, almost 11 years. And its
predecessor, 2.2, has been out of support since its last release in
2017, over 5 years ago. The last mention on the mailing list was from
around the same time, in this thread:
https://lore.kernel.org/git/20171231023234.21215-1-tmz@pobox.com/
We can probably assume that 2.4 is available everywhere. And the stakes
are fairly low, as the worst case is that such a platform would skip the
http tests.
This lets us clean up a few minor version checks in the config file, but
also revert f1f2b45be0 (tests: adjust the configuration for Apache 2.2,
2016-05-09). Its technique isn't _too_ bad, but certainly required a bit
more explanation than the 2.4 version it replaced. I manually confirmed
that the test in t5551 still behaves as expected (if you replace
"cadabra" with "foo", the server correctly rejects the request).
It will also help future patches which will no longer have to deal with
conditional config for this old version.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apache 2.2 was released in 2005, almost 18 years ago. We can probably
assume that people are running a version at least that old (and the
stakes for removing it are fairly low, as the worst case is that they
would not run the http tests against their ancient version).
Dropping support for the older versions cleans up the config file a
little, and will also enable us to bump the required version further
(with more cleanups) in a future patch.
Note that the file actually checks for version 2.1. In apache's
versioning scheme, odd numbered versions are for development and even
numbers are for stable releases. So 2.1 and 2.2 are effectively the same
from our perspective.
Older versions would just fail to start, which would generally cause us
to skip the tests. However, we do have version detection code in
lib-httpd.sh which produces a nicer error message, so let's update that,
too. I didn't bother handling the case of "3.0", etc. Apache has been on
2.x for 21 years, with no signs of bumping the major version. And if
they eventually do, I suspect there will be enough breaking changes that
we'd need to update more than just the numeric version check. We can
worry about that hypothetical when it happens.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add one more candidate directory that may house httpd modules while
running tests.
* es/locate-httpd-module-location-in-test:
lib-httpd: extend module location auto-detection
|
|
Although it is possible to manually set LIB_HTTPD_PATH and
LIB_HTTPD_MODULE_PATH to point at the location of `httpd` and its
modules, doing so is cumbersome and easily forgotten. To address this,
0d344738dc (t/lib-http.sh: Restructure finding of default httpd
location, 2010-01-02) enhanced lib-httpd.sh to automatically detect the
location of `httpd` and its modules in order to facilitate out-of-the-
box testing on a wider range of platforms. Follow that lead by further
enhancing it to automatically detect the `httpd` modules on Void Linux,
as well.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have occasionally seen bugs that affect Git running only against an
HTTP/2 web server, not an HTTP one. For instance, b66c77a64e (http:
match headers case-insensitively when redacting, 2021-09-22). But since
we have no test coverage using HTTP/2, we only uncover these bugs in the
wild.
That commit gives a recipe for converting our Apache setup to support
HTTP/2, but:
- it's not necessarily portable
- we don't want to just test HTTP/2; we really want to do a variety of
basic tests for _both_ protocols
This patch handles both problems by running a duplicate of t5551
(labeled as t5559 here) with an alternate-universe setup that enables
HTTP/2. So we'll continue to run t5551 as before, but run the same
battery of tests again with HTTP/2. If HTTP/2 isn't supported on a given
platform, then t5559 should bail during the webserver setup, and
gracefully skip all tests (unless GIT_TEST_HTTPD has been changed from
"auto" to "yes", where the point is to complain when webserver setup
fails).
In theory other http-related test scripts could benefit from the same
duplication, but doing t5551 should give us a reasonable check of basic
functionality, and would have caught both bugs we've seen in the wild
with HTTP/2.
A few notes on the implementation:
- a script enables the server side config by calling enable_http2
before starting the webserver. This avoids even trying to load any
HTTP/2 config for t5551 (which is what lets it keep working with
regular HTTP even on systems that don't support it). This also sets
a prereq which can be used by individual tests.
- As discussed in b66c77a64e, the http2 module isn't compatible with
the "prefork" mpm, so we need to pick something else. I chose
"event" here, which works on my Debian system, but it's possible
there are platforms which would prefer something else. We can adjust
that later if somebody finds such a platform.
- The test "large fetch-pack requests can be sent using chunked
encoding" makes sure we use a chunked transfer-encoding by looking
for that header in the trace. But since HTTP/2 has its own streaming
mechanisms, we won't find such a header. We could skip the test
entirely by marking it with !HTTP2. But there's some value in making
sure that the fetch itself succeeded. So instead, we'll confirm that
either we're using HTTP2 _or_ we saw the expected chunked header.
- the redaction tests fail under HTTP/2 with recent versions of curl.
This is a bug! I've marked them with !HTTP2 here to skip them under
t5559 for the moment. Using test_expect_failure would be more
appropriate, but would require a bunch of boilerplate. Since we'll
be fixing them momentarily, let's just skip them for now to keep the
test suite bisectable, and we can re-enable them in the commit that
fixes the bug.
- one alternative layout would be to push most of t5551 into a
lib-t5551.sh script, then source it from both t5551 and t5559.
Keeping t5551 intact seemed a little simpler, as its one less level
of indirection for people fixing bugs/regressions in the non-HTTP/2
tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Add and use a LIBCURL prerequisite for tests added in
6dcbdc0d661 (remote: create fetch.credentialsInUrl config,
2022-06-06).
These tests would get as far as emitting a couple of the warnings we
were testing for, but would then die as we had no "git-remote-https"
program compiled.
It would be more consistent with other prerequisites (e.g. PERL for
NO_PERL) to name this "CURL", but since e9184b0789a (t5561: skip tests
if curl is not available, 2018-04-03) we've had that prerequisite
defined for checking of we have the curl(1) program.
The existing "CURL" prerequisite is only used in one place, and we
should probably name it "CURL_PROGRAM", then rename "LIBCURL" to
"CURL" as a follow-up, but for now (pre-v2.37.0) let's aim for the
most minimal fix possible.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When pushing to a server which erroneously omits the final ref-status
report, the client side should complain about the refs for which we
didn't receive the status (because we can't just assume they were
updated). This works over most transports like ssh, but for http we'll
print a very misleading "Everything up-to-date".
It works for ssh because send-pack internally sets the status of each
ref to REF_STATUS_EXPECTING_REPORT, and then if the server doesn't tell
us about a particular ref, it will stay at that value. When we print the
final status table, we'll see that we're still on EXPECTING_REPORT and
complain then.
But for http, we go through remote-curl, which invokes send-pack with
"--stateless-rpc --helper-status". The latter option causes send-pack to
return a machine-readable list of ref statuses to the remote helper. But
ever since its inception in de1a2fdd38 (Smart push over HTTP: client
side, 2009-10-30), the send-pack code has simply omitted mention of any
ref which ended up in EXPECTING_REPORT.
In the remote helper, we then take the absence of any status report
from send-pack to mean that the ref was not even something we tried to
send, and thus it prints "Everything up-to-date". Fortunately it does
detect the eventual non-zero exit from send-pack, and propagates that in
its own non-zero exit code. So at least a careful script invoking "git
push" would notice the failure. But sending the misleading message on
stderr is certainly confusing for humans (not to mention the
machine-readable "push --porcelain" output, though again, any careful
script should be checking the exit code from push, too).
Nobody seems to have noticed because the server in this instance has to
be misbehaving: it has promised to support the ref-status capability
(otherwise the client will not set EXPECTING_REPORT at all), but didn't
send us any. If the connection were simply cut, then send-pack would
complain about getting EOF while trying to read the status. But if the
server actually sends a flush packet (i.e., saying "now you have all of
the ref statuses" without actually sending any), then the client ends up
in this confused situation.
The fix is simple: we should return an error message from "send-pack
--helper-status", just like we would for any other error per-ref error
condition (in the test I included, the server simply omits all ref
status responses, but a more insidious version of this would skip only
some of them).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, remote-curl acts as a proxy and blindly forwards packets
between an HTTP server and fetch-pack. In the case of a stateless RPC
connection where the connection is terminated with a partially written
packet, remote-curl will blindly send the partially written packet
before waiting on more input from fetch-pack. Meanwhile, fetch-pack will
read the partial packet and continue reading, expecting more input. This
results in a deadlock between the two processes.
For a stateless connection, inspect packets before sending them and
error out if a packet line packet is incomplete.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Among other differences relative to GNU sed, macOS' sed always ends its
output with a trailing newline, even if the input did not have such a
trailing newline.
Surprisingly, this makes three httpd-based tests fail on macOS: t5616,
t5702 and t5703. ("Surprisingly" because those tests have been around
for some time, but apparently nobody runs them on macOS with a working
Apache2 setup.)
The reason is that we use `sed` in those tests to filter the response of
the web server. Apart from the fact that we use GNU constructs (such as
using a space after the `c` command instead of a backslash and a
newline), we have another problem: macOS' sed LF-only newlines while
webservers are supposed to use CR/LF ones.
Even worse, t5616 uses `sed` to replace a binary part of the response
with a new binary part (kind of hoping that the replaced binary part
does not contain a 0x0a byte which would be interpreted as a newline).
To that end, it calls on Perl to read the binary pack file and
hex-encode it, then calls on `sed` to prefix every hex digit pair with a
`\x` in order to construct the text that the `c` statement of the `sed`
invocation is supposed to insert. So we call Perl and sed to construct a
sed statement. The final nail in the coffin is that macOS' sed does not
even interpret those `\x<hex>` constructs.
Let's just replace all of that by Perl snippets. With Perl, at least, we
do not have to deal with GNU vs macOS semantics, we do not have to worry
about unwanted trailing newlines, and we do not have to spawn commands
to construct arguments for other commands to be spawned (i.e. we can
avoid a whole lot of shell scripting complexity).
The upshot is that this fixes t5616, t5702 and t5703 on macOS with
Apache2.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 3b072c577b (tests: replace test_tristate with "git env--helper",
2019-06-21) we get the normalized bool values of various GIT_TEST_*
environment variables via 'git env--helper'. Now, while the 'git
env--helper' command itself does catch invalid values in the
environment variable or in the given --default and exits with error
(exit code 128 or 129, respectively), it's invoked in conditions like
'if ! git env--helper ...', which means that all invalid bool values
are interpreted the same as the ordinary 'false' (exit code 1). This
has led to inadvertently skipped httpd tests in our CI builds for a
couple of weeks, see 3960290675 (ci: restore running httpd tests,
2019-09-06).
Let's be more careful about what the test suite accepts as bool values
in GIT_TEST_* environment variables, and error out loud and clear on
invalid values instead of simply skipping tests. Add the
'test_bool_env' helper function to encapsulate the invocation of 'git
env--helper' and the verification of its exit code, and replace all
invocations of that command in our test framework and test suite with
a call to this new helper (except in 't0017-env-helper.sh', of
course).
$ GIT_TEST_GIT_DAEMON=YesPlease ./t5570-git-daemon.sh
fatal: bad numeric config value 'YesPlease' for 'GIT_TEST_GIT_DAEMON': invalid unit
error: test_bool_env requires bool values both for $GIT_TEST_GIT_DAEMON and for the default fallback
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The test_tristate helper introduced in 83d842dc8c ("tests: turn on
network daemon tests by default", 2014-02-10) can now be better
implemented with "git env--helper" to give the variables in question
the standard boolean behavior.
The reason for the "tristate" was to have all of false/true/auto,
where "auto" meant either "false" or "true" depending on what the
fallback was. With the --default option to "git env--helper" we can
simply have e.g. GIT_TEST_HTTPD where we know if it's true because the
user asked explicitly ("true"), or true implicitly ("auto").
This breaks backwards compatibility for explicitly setting "auto" for
these variables, but I don't think anyone cares. That was always
intended to be internal.
This means the test_normalize_bool() code in test-lib-functions.sh
goes away in addition to test_tristate(). We still need the
test_skip_or_die() helper, but now it takes the variable name instead
of the value, and uses "git env--bool" to distinguish a default "true"
from an explicit "true" (in those "explicit true" cases we want to
fail the test in question).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use 'test_atexit' to run cleanup commands to stop httpd at the end of
the test script or upon interrupt or failure, as it is shorter,
simpler, and more robust than registering such cleanup commands in the
trap on EXIT in the test scripts.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git fetch" and "git upload-pack" learned to send all exchange over
the sideband channel while talking the v2 protocol.
* jt/fetch-v2-sideband:
t/lib-httpd: pass GIT_TEST_SIDEBAND_ALL through Apache
|
|
07c3c2aa16 ("tests: define GIT_TEST_SIDEBAND_ALL", 2019-01-16) added
GIT_TEST_SIDEBAND_ALL to the apache.conf PassEnv list. Avoid warnings
from Apache when the variable is unset, as we do for GIT_VALGRIND* and
GIT_TRACE, from f628825481 ("t/lib-httpd: handle running under
--valgrind", 2012-07-24) and 89c57ab3f0 ("t: pass GIT_TRACE through
Apache", 2015-03-13), respectively.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a smart HTTP server sends an error message via pkt-line, we detect
the error due to using PACKET_READ_DIE_ON_ERR_PACKET. This case was
added by 2d103c31c2 (pack-protocol.txt: accept error packets in any
context, 2018-12-29), but not covered by tests.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several test scripts run daemons like 'git-daemon' or Apache, and
communicate with them through TCP sockets. To have unique ports where
these daemons are accessible, the ports are usually the number of the
corresponding test scripts, unless the user overrides them via
environment variables, and thus all those tests and test libs contain
more or less the same bit of one-liner boilerplate code to find out
the port. The last patch in this series will make this a bit more
complicated.
Factor out finding the port for a daemon into the common helper
function 'test_set_port' to avoid repeating ourselves.
Take special care of test scripts with "low" numbers:
- Test numbers below 1024 would result in a port that's only usable
as root, so set their port to '10000 + test-nr' to make sure it
doesn't interfere with other tests in the test suite. This makes
the hardcoded port number in 't0410-partial-clone.sh' unnecessary,
remove it.
- The shell's arithmetic evaluation interprets numbers with leading
zeros as octal values, which means that test number below 1000 and
containing the digits 8 or 9 will trigger an error. Remove all
leading zeros from the test numbers to prevent this.
Note that the 'git p4' tests are unlike the other tests involving
daemons in that:
- 'lib-git-p4.sh' doesn't use the test's number for unique port as
is, but does a bit of additional arithmetic on top [1].
- The port is not overridable via an environment variable.
With this patch even 'git p4' tests will use the test's number as
default port, and it will be overridable via the P4DPORT environment
variable.
[1] Commit fc00233071 (git-p4 tests: refactor and cleanup, 2011-08-22)
introduced that "unusual" unique port computation without
explaining why it was necessary (as opposed to simply using the
test number as is). It seems to be just unnecessary complication,
and in any case that commit came way before the "test nr as unique
port" got "standardized" for other daemons in commits c44132fcf3
(tests: auto-set git-daemon port, 2014-02-10), 3bb486e439 (tests:
auto-set LIB_HTTPD_PORT from test name, 2014-02-10), and
bf9d7df950 (t/lib-git-svn.sh: improve svnserve tests with parallel
make test, 2017-12-01).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
httpd tests saw occasional breakage due to the way its access log
gets inspected by the tests, which has been updated to make them
less flaky.
* sg/httpd-test-unflake:
t/lib-httpd: avoid occasional failures when checking access.log
t/lib-httpd: add the strip_access_log() helper function
t5541: clean up truncating access log
|
|
The last test of 't5561-http-backend.sh', 'server request log matches
test results' may fail occasionally, because the order of entries in
Apache's access log doesn't match the order of requests sent in the
previous tests, although all the right requests are there. I saw it
fail on Travis CI five times in the span of about half a year, when
the order of two subsequent requests was flipped, and could trigger
the failure with a modified Git. However, I was unable to trigger it
with stock Git on my machine. Three tests in
't5541-http-push-smart.sh' and 't5551-http-fetch-smart.sh' check
requests in the log the same way, so they might be prone to a similar
occasional failure as well.
When a test sends a HTTP request, it can continue execution after
'git-http-backend' fulfilled that request, but Apache writes the
corresponding access log entry only after 'git-http-backend' exited.
Some time inevitably passes between fulfilling the request and writing
the log entry, and, under unfavourable circumstances, enough time
might pass for the subsequent request to be sent and fulfilled by a
different Apache thread or process, and then Apache writes access log
entries racily.
This effect can be exacerbated by adding a bit of variable delay after
the request is fulfilled but before 'git-http-backend' exits, e.g.
like this:
diff --git a/http-backend.c b/http-backend.c
index f3dc218b2..bbf4c125b 100644
--- a/http-backend.c
+++ b/http-backend.c
@@ -709,5 +709,7 @@ int cmd_main(int argc, const char **argv)
max_request_buffer);
cmd->imp(&hdr, cmd_arg);
+ if (getpid() % 2)
+ sleep(1);
return 0;
}
This delay considerably increases the chances of log entries being
written out of order, and in turn makes t5561's last test fail almost
every time. Alas, it doesn't seem to be enough to trigger a similar
failure in t5541 and t5551.
So, since we can't just rely on the order of access log entries always
corresponding the order of requests, make checking the access log more
deterministic by sorting (simply lexicographically) both the stripped
access log entries and the expected entries before the comparison with
'test_cmp'. This way the order of log entries won't matter and
occasional out-of-order entries won't trigger a test failure, but the
comparison will still notice any unexpected or missing log entries.
OTOH, this sorting will make it harder to identify from which test an
unexpected log entry came from or which test's request went missing.
Therefore, in case of an error include the comparison of the unsorted
log enries in the test output as well.
And since all this should be performed in four tests in three test
scripts, put this into a new helper function 'check_access_log' in
't/lib-httpd.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Four tests in three httpd-related test scripts check the contents of
Apache's 'access.log', and they all do so by running 'sed' with the
exact same script consisting of four s/// commands to strip
uninteresting log fields and to vertically align the requested URLs.
Extract this into a common helper function 'strip_access_log' in
'lib-httpd.sh', and use it in all of those tests.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add tests to check the behavior of fetching from a repository which
changes between rounds of negotiation (for example, when different
servers in a load-balancing agreement participate in the same stateless
RPC negotiation). This forms a baseline of comparison to the ref-in-want
functionality (which will be introduced to the client in subsequent
commits), and ensures that subsequent commits do not change existing
behavior.
As part of this effort, a mechanism to substitute strings in a single
HTTP response is added.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tests for "git svn" have been taught to reuse the lib-httpd test
infrastructure when testing the subversion integration that
interacts with subversion repositories served over the http://
protocol.
* ew/git-svn-http-tests:
git svn: migrate tests to use lib-httpd
t/t91*: do not say how to avoid the tests
|
|
This allows us to use common test infrastructure and parallelize
the tests. For now, GIT_SVN_TEST_HTTPD=true needs to be set to
enable the SVN HTTP tests because we reuse the same test cases
for both file:// and http:// SVN repositories. SVN_HTTPD_PORT
is no longer honored.
Tested under Apache 2.2 and 2.4 on Debian 7.x (wheezy) and
8.x (jessie), respectively.
Cc: Clemens Buchacher <drizzd@aon.at>
Cc: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Failure to bring up httpd for testing is not considered an error, so the
trash directory, which contains this error.log file, is removed and we
don't know what made httpd fail to start. Improve the situation a bit,
print error.log but only in verbose mode.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The Git CodingGuidelines prefer the $(...) construct for command
substitution instead of using the backquotes `...`.
The backquoted form is the traditional method for command
substitution, and is supported by POSIX. However, all but the
simplest uses become complicated quickly. In particular, embedded
command substitutions and/or the use of double quotes require
careful escaping with the backslash character.
The patch was generated by:
for _f in $(find . -name "*.sh")
do
perl -i -pe 'BEGIN{undef $/;} s/`(.+?)`/\$(\1)/smg' "${_f}"
done
and then carefully proof-read.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test clean-up.
* jk/skip-http-tests-under-no-curl:
tests: skip dav http-push tests under NO_EXPAT=NoThanks
t/lib-httpd.sh: skip tests if NO_CURL is defined
|
|
When built with NO_EXPAT=NoThanks, we will not have a working http-push
over webdav.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we built git without curl, we can't actually test against
an http server. In fact, all of the test scripts which
include lib-httpd.sh already perform this check, with one
exception: t5540. For those scripts, this is a noop, and for
t5540, this is a bugfix (it used to fail when built with
NO_CURL, though it could go unnoticed if you had a stale
git-remote-https in your build directory).
Noticed-by: Junio C Hamano <junio@pobox.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Apache removes GIT_TRACE from the environment before running
git-http-backend. This can make it hard to debug the server
side of an http session. Let's let it through.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The SANITY prerequisite is really about whether the
filesystem will respect the permissions we set, and being
root is only one part of that. But the httpd tests really
just care about not being root, as they are trying to avoid
weirdness in apache (see a1a3011 for details).
Let's switch out SANITY for a new NOT_ROOT prerequisite,
which will let us tweak SANITY more freely.
We implement NOT_ROOT by checking `id -u`, which is in POSIX
and seems to be available even on MSYS. Note that we cannot
just call this "ROOT" and ask for "!ROOT". The possible
outcomes are:
1. we know we are root
2. we know we are not root
3. we could not tell, because `id` was not available
We should conservatively treat (3) as "does not have the
prerequisite", which means that a naive negation would not
work.
Helped-by: Kyle J. McKay <mackyle@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update tests and scripts to avoid "test ... -a ...", which is often
more error-prone than "test ... && test ...".
Squashed misconversion fix-up into git-submodule.sh updates.
* ep/avoid-test-a-o:
git-submodule.sh: avoid "echo" path-like values
git-submodule.sh: avoid "test <cond> -a/-o <cond>"
t/test-lib-functions.sh: avoid "test <cond> -a/-o <cond>"
t/t9814-git-p4-rename.sh: avoid "test <cond> -a/-o <cond>"
t/t5538-push-shallow.sh: avoid "test <cond> -a/-o <cond>"
t/t5403-post-checkout-hook.sh: avoid "test <cond> -a/-o <cond>"
t/t5000-tar-tree.sh: avoid "test <cond> -a/-o <cond>"
t/t4102-apply-rename.sh: avoid "test <cond> -a/-o <cond>"
t/t0026-eol-config.sh: avoid "test <cond> -a/-o <cond>"
t/t0025-crlf-auto.sh: avoid "test <cond> -a/-o <cond>"
t/lib-httpd.sh: avoid "test <cond> -a/-o <cond>"
git-rebase--interactive.sh: avoid "test <cond> -a/-o <cond>"
git-mergetool.sh: avoid "test <cond> -a/-o <cond>"
git-bisect.sh: avoid "test <cond> -a/-o <cond>"
contrib/examples/git-resolve.sh: avoid "test <cond> -a/-o <cond>"
contrib/examples/git-repack.sh: avoid "test <cond> -a/-o <cond>"
contrib/examples/git-merge.sh: avoid "test <cond> -a/-o <cond>"
contrib/examples/git-commit.sh: avoid "test <cond> -a/-o <cond>"
contrib/examples/git-clone.sh: avoid "test <cond> -a/-o <cond>"
check_bindir: avoid "test <cond> -a/-o <cond>"
|
|
Propagate the error messages from the webserver better to the
client coming over the HTTP transport.
* jk/http-errors:
http: default text charset to iso-8859-1
remote-curl: reencode http error messages
strbuf: add strbuf_reencode helper
http: optionally extract charset parameter from content-type
http: extract type/subtype portion of content-type
t5550: test display of remote http error messages
t/lib-httpd: use write_script to copy CGI scripts
test-lib: preserve GIT_CURL_VERBOSE from the environment
|
|
* jk/do-not-run-httpd-tests-as-root:
t/lib-httpd: require SANITY prereq
|
|
The construct is error-prone; "test" being built-in in most modern
shells, the reason to avoid "test <cond> && test <cond>" spawning
one extra process by using a single "test <cond> -a <cond>" no
longer exists.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since commit 426e70d (remote-curl: show server content on
http errors, 2013-04-05), we relay any text/plain error
messages from the remote server to the user. However, we
never tested it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using write_script will set our shebang line appropriately
with $SHELL_PATH. The script that is there now is quite
simple and likely to succeed even with a non-POSIX /bin/sh,
but it does not hurt to be defensive.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our test httpd setup will not generally run as root, because
Apache will want to setuid, and we do not set up the "User"
config directive. On some systems, like current Debian
unstable, Apache fails to start, and we skip the tests:
$ sudo ./t5539-fetch-http-shallow.sh --debug
1..0 # SKIP web server setup failed
$ cat trash*t5539*/httpd/error.log
[...]
(22)Invalid argument: AH00024: Couldn't set permissions on
the rewrite-map mutex; check User and Group directives
AH00016: Configuration Failed
However, on other systems (reportedly Ubuntu 11.04), Apache
seems to start, and then bails during our tests with:
getpwuid: couldn't determine user name from uid 4294967295,
you probably need to modify the User directive
Child 12037 returned a Fatal error... Apache is exiting!
This may be related to the pre-fork/threading model in use
(note that the second one complains of the child dying).
However, it's not even worth investigating; in either case
we just want to skip the tests, and we already recommend
against running the test suite as root. Let's just
explicitly check this condition and skip the tests rather
than expecting Apache to do the right thing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Teach "make test" to run networking tests when possible by default.
* jk/run-network-tests-by-default:
tests: turn on network daemon tests by default
|
|
We do not run the httpd nor git-daemon tests by default, as
they are rather heavyweight and require network access
(albeit over localhost). However, it would be nice if more
pepole ran them, for two reasons:
1. We would get more test coverage on more systems.
2. The point of the test suite is to find regressions. It
is very easy to change some of the underlying code and
break the httpd code without realizing you are even
affecting it. Running the httpd tests helps find these
problems sooner (ideally before the patches even hit
the list).
We still want to leave an "out", though, for people who really do
not want to run them. For that reason, the GIT_TEST_HTTPD and
GIT_TEST_GIT_DAEMON variables are now tri-state booleans
(true/false/auto), so you can say GIT_TEST_HTTPD=false to turn the
tests back off. To support those who want a stable single way to
disable these tests across versions of Git before and after this
change, an empty string explicitly set to these variables is also
taken as "false", so the behaviour changes only for those who:
a. did not express any preference by leaving these variables
unset. They did not test these features before, but now they
do; or
b. did express that they want to test these features by setting
GIT_TEST_FEATURE=false (or any equivalent other ways to tell
"false" to Git, e.g. "0"), which has been a valid but funny way
to say that they do want to test the feature only because we
used to interpret any non-empty string to mean "yes please
test". They no longer test that feature.
In addition, we are forgiving of common setup failures (e.g., you do
not have apache installed, or have an old version) when the
tri-state is "auto" (or unset), but report an error when it is
"true". This makes "auto" a sane default, as we should not cause
failures on setups where the tests cannot run. But it allows people
who use "true" to catch regressions in their system (e.g., they
uninstalled apache, but were expecting their automated test runs to
test git-httpd, and would want to be notified).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We set the default apache port for each of the httpd tests
to the 4-digit test number of the test script. We want these
to remain unique so that the tests do not conflict with each
other when run in parallel.
Instead of doing it manually in each test script, let's just
set it from the test name at run time. This is simpler, and
is one less thing to be updated when test scripts are
renamed (e.g., when being re-rolled or when conflicting
after being merged with another topic).
Incidentally, this fixes a case where t5537 and t5538 used
the same port number (5537), and could conflict with each
other when run in parallel.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Using the same username and password during the tests would not
catch a potential breakage of sending one when we should be sending
the other.
* jk/http-auth-tests-robustify:
use distinct username/password for http auth tests
|
|
The httpd server we set up to test git's http client code
knows about a single account, in which both the username and
password are "user@host" (the unusual use of the "@" here is
to verify that we handle the character correctly when URL
escaped).
This means that we may miss a certain class of errors in
which the username and password are mixed up internally by
git. We can make our tests more robust by having distinct
values for the username and password.
In addition to tweaking the server passwd file and the
client URL, we must teach the "askpass" harness to accept
multiple values. As a bonus, this makes the setup of some
tests more obvious; when we are expecting git to ask
only about the password, we can seed the username askpass
response with a bogus value.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A #! line in these files is misleading, since these scriptlets are
meant to be sourced with '.' (using whatever shell sources them)
instead of run directly using the interpreter named on the #! line.
Removing the #! line shouldn't hurt syntax highlighting since
these files have filenames ending with '.sh'. For documentation,
add a brief description of how the files are meant to be used in
place of the shebang line.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Handle the case where http transport gets redirected during the
authorization request better.
* jk/http-auth-redirects:
http.c: Spell the null pointer as NULL
remote-curl: rewrite base url from info/refs redirects
remote-curl: store url as a strbuf
remote-curl: make refs_url a strbuf
http: update base URLs when we see redirects
http: provide effective url to callers
http: hoist credential request out of handle_curl_result
http: refactor options to http_get_*
http_request: factor out curlinfo_strbuf
http_get_file: style fixes
|
|
For efficiency and security reasons, an earlier commit in
this series taught http_get_* to re-write the base url based
on redirections we saw while making a specific request.
This commit wires that option into the info/refs request,
meaning that a redirect from
http://example.com/foo.git/info/refs
to
https://example.com/bar.git/info/refs
will behave as if "https://example.com/bar.git" had been
provided to git in the first place.
The tests bear some explanation. We introduce two new
hierearchies into the httpd test config:
1. Requests to /smart-redir-limited will work only for the
initial info/refs request, but not any subsequent
requests. As a result, we can confirm whether the
client is re-rooting its requests after the initial
contact, since otherwise it will fail (it will ask for
"repo.git/git-upload-pack", which is not redirected).
2. Requests to smart-redir-auth will redirect, and require
auth after the redirection. Since we are using the
redirected base for further requests, we also update
the credential struct, in order not to mislead the user
(or credential helpers) about which credential is
needed. We can therefore check the GIT_ASKPASS prompts
to make sure we are prompting for the new location.
Because we have neither multiple servers nor https
support in our test setup, we can only redirect between
paths, meaning we need to turn on
credential.useHttpPath to see the difference.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
|
|
Commit 05c1eb1 (push: teach --force-with-lease to smart-http
transport) fixed the compare-and-swap test in t5541. It
tried to mark the test as passing by teaching the test
helper function to expect an extra "success or failure"
parameter, but forgot to actually use the parameter in the
helper.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have been passing enough information to enable the
compare-and-swap logic down to the transport layer, but the
transport helper was not passing it to smart-http transport.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The push() method in remote-curl.c is not told and does not pass the
necessary information to underlying send-pack, so this extension
does not yet work. Leave a note in the test suite.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before parsing a suspected smart-HTTP response verify the returned
Content-Type matches the standard. This protects a client from
attempting to process a payload that smells like a smart-HTTP
server response.
JGit has been doing this check on all responses since the dawn of
time. I mistakenly failed to include it in git-core when smart HTTP
was introduced. At the time I didn't know how to get the Content-Type
from libcurl. I punted, meant to circle back and fix this, and just
plain forgot about it.
Signed-off-by: Shawn Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Pushing to smart HTTP server with recent Git fails without having
the username in the URL to force authentication, if the server is
configured to allow GET anonymously, while requiring authentication
for POST.
* jk/maint-http-half-auth-push:
http: prompt for credentials on failed POST
http: factor out http error code handling
t: test http access to "half-auth" repositories
t: test basic smart-http authentication
t/lib-httpd: recognize */smart/* repos as smart-http
t/lib-httpd: only route auth/dumb to dumb repos
t5550: factor out http auth setup
t5550: put auth-required repo in auth/dumb
|
|
The t5550 script sets up a nice askpass helper for
simulating user input and checking what git prompted for.
Let's make it available to other http scripts by migrating
it to lib-httpd.
We can use this immediately in t5540 to make our tests more
robust (previously, we did not check at all that hitting the
password-protected repo actually involved a password).
Unfortunately, we end up failing the test because the
current code erroneously prompts twice (once for
git-remote-http, and then again when the former spawns
git-http-push).
More importantly, though, it will let us easily add
smart-http authentication tests in t5541 and t5551; we
currently do not test smart-http authentication at all.
As part of making it generic, let's always look for and
store auxiliary askpass files at the top-level trash
directory; this makes it compatible with t5540, which runs
some tests from sub-repositories. We can abstract away the
ugliness with a short helper function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Running the http tests with valgrind does not work for two
reasons:
1. Apache complains about following the symbolic link from
git-http-backend to valgrind.sh.
2. Apache does not pass through the GIT_VALGRIND variable
to the backend CGI.
This patch fixes both problems. Unfortunately, there is a
slight hack we need to handle passing environment variables
through Apache. If we just tell it:
PassEnv GIT_VALGRIND
then Apache will complain when GIT_VALGRIND is not set. If
we try:
SetEnv GIT_VALGRIND ${GIT_VALGRIND}
then when GIT_VALGRIND is not set, it will pass through the
literal "${GIT_VALGRIND}". Instead, we now unconditionally
pass through GIT_VALGRIND from lib-httpd.sh into apache,
even if it is empty.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These just checked that we could clone a repository when the
username and password were given in the URL; we should also
check that git will prompt when no or partial credentials
are given.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Gettextize the "To prevent you from losing history" message. A test in
lib-httpd.sh and another in t5541-http-push.sh explicitly checked for
this message. Change them to skip under GETTEXT_POISON=YesPlease.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a test for HTTP authentication and proper percent-decoding of the
userinfo (username and password) part of the URL.
Signed-off-by: Gabriel Corona <gabriel.corona@enst-bretagne.fr>
Acked-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The '!()' notation is interpreted as a pattern-list on Ksh. The Ksh man
page describe it as follows:
!(pattern-list)
Matches anything except one of the given patterns.
Ksh performs a file glob using the pattern-list and then tries to execute
the first file in the list. If a space is added between the '!' and the
open parens, then Ksh will not interpret it as a pattern list, but in this
case, it is preferred to use test_must_fail, so lets do so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change tests to skip with skip_all=* + test_done instead of using say
+ test_done.
This is a follow-up to "tests: Skip tests in a way that makes sense
under TAP" (fadb5156e4). I missed these cases when prepearing that
patch, hopefully this is all of them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
SKIP messages are now part of the TAP plan. A TAP harness now knows
why a particular test was skipped and can report that information. The
non-TAP harness built into Git's test-lib did nothing special with
these messages, and is unaffected by these changes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move non-fast forward tests to lib-httpd.sh so that we don't have to
duplicate the tests in both t5540 and t5541.
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
On CentOS 5, httpd is located at /usr/sbin/httpd, and the modules are
located at /usr/lib64/httpd/modules. To enable easy testing of httpd,
we would like those locations to be detected automatically.
uname might not be the best way to determine the default location for
httpd since different Linux distributions apparently put httpd in
different places, so we test a couple different locations for httpd,
and use the first one that we come across. We do the same for the
modules directory.
cc: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Tarmigan Casebolt <tarmigan+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Previously, die() would report the exit code of stop_httpd. Instead,
save and reset the exit code before dying.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
test_done always exits, so this line is never executed.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are some redirects and some error checking that need
to be done by the caller; let's move both into the
start_httpd function so that all callers don't have to
repeat them (there is only one caller now, but another will
follow in this series).
This doesn't violate any assumptions that aren't already
being made by lib-httpd, which is happy to say "skipping"
and call test_done for a number of other cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch allows the HTTP tests to run on OS X 10.5. It is not
sufficient to be able to pass in LIB_HTTPD_PATH and
LIB_HTTPD_MODULE_PATH alone, as the apache.conf also needs a couple
tweaks.
These changes are put into an <IfDefine> to keep them Darwin specific,
but this means lib-httpd.sh needs to be modified to pass -DDarwin to
apache when running on Darwin. As long as we're making this change to
lib-httpd.sh, we may as well set LIB_HTTPD_PATH and
LIB_HTTPD_MODULE_PATH to appropriate default values for the platform.
Note that we now pass HTTPD_PARA to apache at shutdown as well.
Otherwise apache will emit a harmless, but noisy warning that LogFormat
is an unknown directive.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 'man 1p trap' there is written:
"Implementations may permit names with the SIG prefix or ignore case
in signal names as an extension."
So change the lowercase signals to uppercase, which is POSIX compliant
instead of being an extension.
There wasn't anybody claiming that it doesn't work, but there was a bug
with using a signal with the SIG prefix, which is an extension as well.
So let's play it safe and change it, since it doesn't hurt anyone.
While at it, also convert 8 indentation spaces to 1 tab character.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Many test scripts assumed that they will start in a 'trash' subdirectory
that is a single level down from the t/ directory, and referred to their
test vector files by asking for files like "../t9999/expect". This will
break if we move the 'trash' subdirectory elsewhere.
To solve this, we earlier introduced "$TEST_DIRECTORY" so that they can
refer to t/ directory reliably. This finally makes all the tests use
it to refer to the outside environment.
With this patch, and a one-liner not included here (because it would
contradict with what Dscho really wants to do):
| diff --git a/t/test-lib.sh b/t/test-lib.sh
| index 70ea7e0..60e69e4 100644
| --- a/t/test-lib.sh
| +++ b/t/test-lib.sh
| @@ -485,7 +485,7 @@ fi
| . ../GIT-BUILD-OPTIONS
|
| # Test repository
| -test="trash directory"
| +test="trash directory/another level/yet another"
| rm -fr "$test" || {
| trap - exit
| echo >&5 "FATAL: Cannot prepare test area"
all the tests still pass, but we would want extra sets of eyeballs on this
type of change to really make sure.
[jc: with help from Stephan Beyer on http-push tests I do not run myself;
credits for locating silly quoting errors go to Olivier Marin.]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
http-push test has been broken by 4a7aaccd adding a space character
in the place where the test is being run.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This form is not portable across all shells, so replace instances of:
export FOO=bar
with:
FOO=bar
export FOO
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
http-push tests require a web server with WebDAV support.
This commit introduces a HTTPD test library, which can be configured using
the following environment variables.
GIT_TEST_HTTPD enable HTTPD tests
LIB_HTTPD_PATH web server path
LIB_HTTPD_MODULE_PATH web server modules path
LIB_HTTPD_PORT listening port
LIB_HTTPD_DAV enable DAV
LIB_HTTPD_SVN enable SVN
LIB_HTTPD_SSL enable SSL
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
