| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If we write a commit-graph file without the split option, then
we write to $OBJDIR/info/commit-graph and start to ignore
the chains in $OBJDIR/info/commit-graphs/.
Unlink the commit-graph-chain file and expire the graph-{hash}.graph
files in $OBJDIR/info/commit-graphs/ during every write.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we wrote a commit-graph chain, we only modified the tip file in
the chain. It is valuable to verify what we wrote, but not waste
time checking files we did not write.
Add a '--shallow' option to the 'git commit-graph verify' subcommand
and check that it does not read the base graph in a two-file chain.
Making the verify subcommand read from a chain of commit-graphs takes
some rearranging of the builtin code.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The split commit-graph feature is now fully implemented, but needs
some more run-time configurability. Allow direct callers to 'git
commit-graph write --split' to specify the values used in the
merge strategy and the expire time.
Update the documentation to specify these values.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As we merge commit-graph files in a commit-graph chain, we should clean
up the files that are no longer used.
This change introduces an 'expiry_window' value to the context, which is
always zero (for now). We then check the modified time of each
graph-{hash}.graph file in the $OBJDIR/info/commit-graphs folder and
unlink the files that are older than the expiry_window.
Since this is always zero, this immediately clears all unused graph
files. We will update the value to match a config setting in a future
change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In an environment like a fork network, it is helpful to have a
commit-graph chain that spans both the base repo and the fork repo. The
fork is usually a small set of data on top of the large repo, but
sometimes the fork is much larger. For example, git-for-windows/git has
almost double the number of commits as git/git because it rebases its
commits on every major version update.
To allow cross-alternate commit-graph chains, we need a few pieces:
1. When looking for a graph-{hash}.graph file, check all alternates.
2. When merging commit-graph chains, do not merge across alternates.
3. When writing a new commit-graph chain based on a commit-graph file
in another object directory, do not allow success if the base file
has of the name "commit-graph" instead of
"commit-graphs/graph-{hash}.graph".
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When searching for a commit in a commit-graph chain of G graphs with N
commits, the search takes O(G log N) time. If we always add a new tip
graph with every write, the linear G term will start to dominate and
slow the lookup process.
To keep lookups fast, but also keep most incremental writes fast, create
a strategy for merging levels of the commit-graph chain. The strategy is
detailed in the commit-graph design document, but is summarized by these
two conditions:
1. If the number of commits we are adding is more than half the number
of commits in the graph below, then merge with that graph.
2. If we are writing more than 64,000 commits into a single graph,
then merge with all lower graphs.
The numeric values in the conditions above are currently constant, but
can become config options in a future update.
As we merge levels of the commit-graph chain, check that the commits
still exist in the repository. A garbage-collection operation may have
removed those commits from the object store and we do not want to
persist them in the commit-graph chain. This is a non-issue if the
'git gc' process wrote a new, single-level commit-graph file.
After we merge levels, the old graph-{hash}.graph files are no longer
referenced by the commit-graph-chain file. We will expire these files in
a future change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add a new "--split" option to the 'git commit-graph write' subcommand. This
option allows the optional behavior of writing a commit-graph chain.
The current behavior will add a tip commit-graph containing any commits that
are not in the existing commit-graph or commit-graph chain. Later changes
will allow merging the chain and expiring out-dated files.
Add a new test script (t5324-split-commit-graph.sh) that demonstrates this
behavior.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Extend write_commit_graph() to write a commit-graph chain when given the
COMMIT_GRAPH_SPLIT flag.
This implementation is purposefully simplistic in how it creates a new
chain. The commits not already in the chain are added to a new tip
commit-graph file.
Much of the logic around writing a graph-{hash}.graph file and updating
the commit-graph-chain file is the same as the commit-graph file case.
However, there are several places where we need to do some extra logic
in the split case.
Track the list of graph filenames before and after the planned write.
This will be more important when we start merging graph files, but it
also allows us to upgrade our commit-graph file to the appropriate
graph-{hash}.graph file when we upgrade to a chain of commit-graphs.
Note that we use the eighth byte of the commit-graph header to store the
number of base graph files. This determines the length of the base
graphs chunk.
A subtle change of behavior with the new logic is that we do not write a
commit-graph if we our commit list is empty. This extends to the typical
case, which is reflected in t5318-commit-graph.sh.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The write_commit_graph() method uses die() to report failure and
exit when confronted with an unexpected condition. This use of
die() in a library function is incorrect and is now replaced by
error() statements and an int return type. Return zero on success
and a negative value on failure.
Now that we use 'goto cleanup' to jump to the terminal condition
on an error, we have new paths that could lead to uninitialized
values. New initializers are added to correct for this.
The builtins 'commit-graph', 'gc', and 'commit' call these methods,
so update them to check the return value. Test that 'git commit-graph
write' returns a proper error code when hitting a failure condition
in write_commit_graph().
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the commit-graph is written we end up calling
parse_commit(). This will in turn invoke code that'll consult the
existing commit-graph about the commit, if the graph is corrupted we
die.
We thus get into a state where a failing "commit-graph verify" can't
be followed-up with a "commit-graph write" if core.commitGraph=true is
set, the graph either needs to be manually removed to proceed, or
core.commitGraph needs to be set to "false".
Change the "commit-graph write" codepath to use a new
parse_commit_no_graph() helper instead of parse_commit() to avoid
this. The latter will call repo_parse_commit_internal() with
use_commit_graph=1 as seen in 177722b344 ("commit: integrate commit
graph with commit parsing", 2018-04-10).
Not using the old graph at all slows down the writing of the new graph
by some small amount, but is a sensible way to prevent an error in the
existing commit-graph from spreading.
Just fixing the current issue would be likely to result in code that's
inadvertently broken in the future. New code might use the
commit-graph at a distance. To detect such cases introduce a
"GIT_TEST_COMMIT_GRAPH_DIE_ON_LOAD" setting used when we do our
corruption tests, and test that a "write/verify" combo works after
every one of our current test cases where we now detect commit-graph
corruption.
Some of the code changes here might be strictly unnecessary, e.g. I
was unable to find cases where the parse_commit() called from
write_graph_chunk_data() didn't exit early due to
"item->object.parsed" being true in
repo_parse_commit_internal() (before the use_commit_graph=1 has any
effect). But let's also convert those cases for good measure, we do
not have exhaustive tests for all possible types of commit-graph
corruption.
This might need to be re-visited if we learn to write the commit-graph
incrementally, but probably not. Hopefully we'll just start by finding
out what commits we have in total, then read the old graph(s) to see
what they cover, and finally write a new graph file with everything
that's missing. In that case the new graph writing code just needs to
continue to use e.g. a parse_commit() that doesn't consult the
existing commit-graphs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change "commit-graph verify" to error on open() failures other than
ENOENT. As noted in the third paragraph of 283e68c72f ("commit-graph:
add 'verify' subcommand", 2018-06-27) and the test it added it's
intentional that "commit-graph verify" doesn't error out when the file
doesn't exist.
But let's not be overly promiscuous in what we accept. If we can't
read the file for other reasons, e.g. permission errors, bad file
descriptor etc. we'd like to report an error to the user.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make the commit-graph loading code work as a library that returns an
error code instead of calling exit(1) when the commit-graph is
corrupt. This means that e.g. "status" will now report commit-graph
corruption as an "error: [...]" at the top of its output, but then
proceed to work normally.
This required splitting up the load_commit_graph_one() function so
that the code that deals with open()-ing and stat()-ing the graph can
now be called independently as open_commit_graph().
This is needed because "commit-graph verify" where the graph doesn't
exist isn't an error. See the third paragraph in
283e68c72f ("commit-graph: add 'verify' subcommand",
2018-06-27). There's a bug in that logic where we conflate the
intended ENOENT with other errno values (e.g. EACCES), but this change
doesn't address that. That'll be addressed in a follow-up change.
I'm then splitting most of the logic out of load_commit_graph_one()
into load_commit_graph_one_fd_st(), which allows for providing an
existing file descriptor and stat information to the loading
code. This isn't strictly needed, but it would be redundant and
confusing to open() and stat() the file twice for some of the
codepaths, this allows for calling open_commit_graph() followed by
load_commit_graph_one_fd_st(). The "graph_file" still needs to be
passed to that function for the the "graph file %s is too small" error
message.
This leaves load_commit_graph_one() unused by everything except the
internal prepare_commit_graph_one() function, so let's mark it as
"static". If someone needs it in the future we can remove the "static"
attribute. I could also rewrite its sole remaining
user ("prepare_commit_graph_one()") to use
load_commit_graph_one_fd_st() instead, but let's leave it at this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When core.commitGraph=true is set, various common commands now consult
the commit graph. Because the commit-graph code is very trusting of
its input data, it's possibly to construct a graph that'll cause an
immediate segfault on e.g. "status" (and e.g. "log", "blame", ...). In
some other cases where git immediately exits with a cryptic error
about the graph being broken.
The root cause of this is that while the "commit-graph verify"
sub-command exhaustively verifies the graph, other users of the graph
simply trust the graph, and will e.g. deference data found at certain
offsets as pointers, causing segfaults.
This change does the bare minimum to ensure that we don't segfault in
the common fill_commit_in_graph() codepath called by
e.g. setup_revisions(), to do this instrument the "commit-graph
verify" tests to always check if "status" would subsequently
segfault. This fixes the following tests which would previously
segfault:
not ok 50 - detect low chunk count
not ok 51 - detect missing OID fanout chunk
not ok 52 - detect missing OID lookup chunk
not ok 53 - detect missing commit data chunk
Those happened because with the commit-graph enabled setup_revisions()
would eventually call fill_commit_in_graph(), where e.g.
g->chunk_commit_data is used early as an offset (and will be
0x0). With this change we get far enough to detect that the graph is
broken, and show an error instead. E.g.:
$ git status; echo $?
error: commit-graph is missing the Commit Data chunk
1
That also sucks, we should *warn* and not hard-fail "status" just
because the commit-graph is corrupt, but fixing is left to a follow-up
change.
A side-effect of changing the reporting from graph_report() to error()
is that we now have an "error: " prefix for these even for
"commit-graph verify". Pseudo-diff before/after:
$ git commit-graph verify
-commit-graph is missing the Commit Data chunk
+error: commit-graph is missing the Commit Data chunk
Changing that is OK. Various errors it emits now early on are prefixed
with "error: ", moving these over and changing the output doesn't
break anything.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use the recently split-up components of the corrupt_graph_and_verify()
function to assert that we error on graphs that are too small. The
error was added in 2a2e32bdc5 ("commit-graph: implement git
commit-graph read", 2018-04-10), but there was no test for it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Split up the corrupt_graph_and_verify() function added in
d9b9f8a6fd ("commit-graph: verify catches corrupt signature",
2018-06-27) into its logical components of setting up the test itself,
doing the corruption in a particular way with "dd", and then finally
testing that stderr is what we expect.
This allows for re-using everything except the now slimmer
corrupt_graph_and_verify() to corrupt the graph in a way that doesn't
involve inserting a given byte sequence at a given position,
e.g. truncating it entirely to a custom value.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/test-tool-gen-nuls:
tests: teach the test-tool to generate NUL bytes and use it
|
|
* mk/t5562-no-input-to-too-large-an-input-test:
t5562: do not depend on /dev/zero
Revert "t5562: replace /dev/zero with a pipe from generate_zero_bytes"
|
|
Some expected failures of git-http-backend leaves running its children
(receive-pack or upload-pack) which still hold opened descriptors
to act.err and with some probability they live long enough to write
there their failure messages after next test has already truncated
the files. This causes occasional failures of the test script.
Avoid the issue by using separated output and error file for each test,
apprending the test number to their name.
Reported-by: Carlo Arenas <carenas@gmail.com>
Helped-by: Carlo Arenas <carenas@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In cc95bc2025 (t5562: replace /dev/zero with a pipe from
generate_zero_bytes, 2019-02-09), we replaced usage of /dev/zero (which
is not available on NonStop, apparently) by a Perl script snippet to
generate NUL bytes.
Sadly, it does not seem to work on NonStop, as t5562 reportedly hangs.
Worse, this also hangs in the Ubuntu 16.04 agents of the CI builds on
Azure Pipelines: for some reason, the Perl script snippet that is run
via `generate_zero_bytes` in t5562's 'CONTENT_LENGTH overflow ssite_t'
test case tries to write out an infinite amount of NUL bytes unless a
broken pipe is encountered, that snippet never encounters the broken
pipe, and keeps going until the build times out.
Oddly enough, this does not reproduce on the Windows and macOS agents,
nor in a local Ubuntu 18.04.
This developer tried for a day to figure out the exact circumstances
under which this hang happens, to no avail, the details remain a
mystery.
In the end, though, what counts is that this here change incidentally
fixes that hang (maybe also on NonStop?). Even more positively, it gets
rid of yet another unnecessary Perl invocation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It was reported [1] that NonStop platform does not have /dev/zero.
The test uses /dev/zero as a dummy input. Passing case (http-backed
failed because of too big input size) should not be reading anything
from it. If http-backend would erroneously try to read any data
returning EOF probably would be even safer than providing some
meaningless data.
Replace /dev/zero with /dev/null to avoid issues with platforms which do
not have /dev/zero.
[1] https://public-inbox.org/git/20190209185930.5256-4-randall.s.becker@rogers.com/
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Revert cc95bc20 ("t5562: replace /dev/zero with a pipe from
generate_zero_bytes", 2019-02-09), as not feeding anything to the
command is a better way to test it.
|
|
* jc/no-grepping-for-strerror-in-tests:
t1404: do not rely on the exact phrasing of strerror()
|
|
"git fetch" and "git upload-pack" learned to send all exchange over
the sideband channel while talking the v2 protocol.
* jt/fetch-v2-sideband:
t/lib-httpd: pass GIT_TEST_SIDEBAND_ALL through Apache
|
|
07c3c2aa16 ("tests: define GIT_TEST_SIDEBAND_ALL", 2019-01-16) added
GIT_TEST_SIDEBAND_ALL to the apache.conf PassEnv list. Avoid warnings
from Apache when the variable is unset, as we do for GIT_VALGRIND* and
GIT_TRACE, from f628825481 ("t/lib-httpd: handle running under
--valgrind", 2012-07-24) and 89c57ab3f0 ("t: pass GIT_TRACE through
Apache", 2015-03-13), respectively.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Not even in C locale, it is wrong to expect that the exact phrasing
"File exists" is used to show EEXIST.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com>
Helped-by: Duy Nguyen <pclouds@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* ab/rebase-test-fix:
rebase: fix regression in rebase.useBuiltin=false test mode
|
|
* rb/no-dev-zero-in-test:
t5562: replace /dev/zero with a pipe from generate_zero_bytes
t5318: replace use of /dev/zero with generate_zero_bytes
test-lib-functions.sh: add generate_zero_bytes function
|
|
Test improvement.
* sg/stress-test:
test-lib: fix non-portable pattern bracket expressions
test-lib: make '--stress' more bisect-friendly
|
|
Test fix.
* kd/t0028-octal-del-is-377-not-777:
t0028: fix wrong octal values for BOM in setup
|
|
Fix a recently introduced regression in c762aada1a ("rebase -x: sanity
check command", 2019-01-29) triggered when running the tests with
GIT_TEST_REBASE_USE_BUILTIN=false. See 62c23938fa ("tests: add a
special setup where rebase.useBuiltin is off", 2018-11-14) for how
that test mode works.
As discussed on-list[1] it's not worth it to implement the sanity
check in the legacy rebase code, we plan to remove it after the 2.21
release. So let's do the bare minimum to make the tests pass under the
GIT_TEST_REBASE_USE_BUILTIN=false special setup.
1. https://public-inbox.org/git/xmqqva1nbeno.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To help platforms that lack /dev/zero (e.g. NonStop), replace use
of /dev/zero to feed "git http-backend" with a pipe of output from
the generate_zero_bytes helper.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are platforms (e.g. NonStop) that lack /dev/zero; use the
generate_zero_bytes helper we just introduced to append stream
of NULs at the end of the file.
The original, even though it uses "dd seek=... count=..." to make it
look like it is overwriting the middle part of an existing file, has
truncated the file before this step with another use of "dd", which
may make it tricky to see why this rewrite is a correct one.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t5318 and t5562 used /dev/zero, which is not portable. This function
provides both a fixed block of NUL bytes and an infinite stream of NULs.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When serializing UTF-16 (and UTF-32), there are three possible ways to
write the stream. One can write the data with a BOM in either big-endian
or little-endian format, or one can write the data without a BOM in
big-endian format.
Most systems' iconv implementations choose to write it with a BOM in
some endianness, since this is the most foolproof, and it is resistant
to misinterpretation on Windows, where UTF-16 and the little-endian
serialization are very common. For compatibility with Windows and to
avoid accidental misuse there, Git always wants to write UTF-16 with a
BOM, and will refuse to read UTF-16 without it.
However, musl's iconv implementation writes UTF-16 without a BOM,
relying on the user to interpret it as big-endian. This causes t0028 and
the related functionality to fail, since Git won't read the file without
a BOM.
Add a Makefile and #define knob, ICONV_OMITS_BOM, that can be set if the
iconv implementation has this behavior. When set, Git will write a BOM
manually for UTF-16 and UTF-32 and then force the data to be written in
UTF-16BE or UTF-32BE. We choose big-endian behavior here because the
tests use the raw "UTF-16" encoding, which will be big-endian when the
implementation requires this knob to be set.
Update the tests to detect this case and write test data with an added
BOM if necessary. Always write the BOM in the tests in big-endian
format, since all iconv implementations that omit a BOM must use
big-endian serialization according to the Unicode standard.
Preserve the existing behavior for systems which do not have this knob
enabled, since they may use optimized implementations, including
defaulting to the native endianness, which may improve performance.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The setup code uses octal values with printf to generate a BOM for
UTF-16/32 BE/LE. It specifically uses '\777' to emit a 0xff byte. This
relies on the fact that most shells truncate the value above 0o377.
Ash however interprets '\777' as '\77' + a literal '7', resulting in an
invalid BOM.
Fix this by using the proper value of 0xff: '\377'.
Signed-off-by: Kevin Daudt <me@ikke.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use a '!' character to start a non-matching pattern bracket
expression, as specified by POSIX in Shell Command Language section
2.13.1 Patterns Matching a Single Character [1].
I used '^' instead in three places in the previous three commits, to
verify that the arguments of the '--stress=' and '--stress-limit='
options and the values of various '*_PORT' environment variables are
valid numbers. With certain shells, at least with dash (upstream and
in Ubuntu 14.04) and mksh, this led to various undesired behaviors:
# error message in case of a valid number
$ ~/src/dash/src/dash ./t3903-stash.sh --stress=8
error: --stress=<N> requires the number of jobs to run
# not the expected error message
$ ~/src/dash/src/dash ./t3903-stash.sh --stress=foo
./t3903-stash.sh: 238: test: Illegal number: foo
# no error message at all?!
$ mksh ./t3903-stash.sh --stress=foo
$ echo $?
0
Some other shells, e.g. Bash (even in posix mode), ksh, dash in Ubuntu
16.04 or later, are apparently happy to accept '^' just as well.
[1] http://pubs.opengroup.org/onlinepubs/009695399/utilities/xcu_chap02.html#tag_02_13
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A flakey "p4" test has been removed.
* ld/git-p4-remove-flakey-test:
git-p4: remove ticket expiry test
|
|
For "rebase -i --reschedule-failed-exec", we do not want the "-y"
shortcut after all.
* js/rebase-i-redo-exec-fix:
Revert "rebase: introduce a shortcut for --reschedule-failed-exec"
|
|
Some errors from the other side coming over smart HTTP transport
were not noticed, which has been corrected.
* js/smart-http-detect-remote-error:
t5551: test server-side ERR packet
remote-curl: tighten "version 2" check for smart-http
remote-curl: refactor smart-http discovery
|
|
Test fix.
* tz/gpg-test-fix:
t/lib-gpg: drop redundant killing of gpg-agent
t/lib-gpg: quote path to ${GNUPGHOME}/trustlist.txt
|
|
Test fix.
* os/rebase-runs-post-checkout-hook:
t5403: correct bash ambiguous redirect error in subtest 8 by quoting $GIT_DIR
|
|
Let's suppose that a test somehow becomes flaky between 'master' and
'pu', and tends to fail within the first 50 repetitions when run with
'--stress'. In such a case we could use 'git bisect' to find the
culprit: if the test script fails with '--stress', then the commit is
definitely bad, but if it survives, say, 300 repetitions, then we could
consider it good with reasonable confidence.
Unfortunately, all this could only be done manually, because
'--stress' would run the test script repeatedly for all eternity on a
good commit, and it would exit with success even when it found a
failure on a bad commit.
So let's make '--stress' usable with 'git bisect run':
- Make it exit with failure if a failure is found.
- Add the '--stress-limit=<N>' option to repeat the test script
at most N times in each of the parallel jobs, and exit with
success when the limit is reached.
And then we could simply run something like:
$ git bisect start origin/pu master
$ git bisect run sh -c 'make && cd t &&
./t1234-foo.sh --stress --stress-limit=300'
Sure, as a brand new feature it won't be any useful right now, but in
a release or three most cooking topics will already contain this, so
we could automatically bisect at least newly introduced flakiness.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The embedded blanks in the full path of the test git repository cased bash
to generate an ambugious redirect error.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 53fc999306 ("gpg-interface t: extend the existing GPG tests with
GPGSM", 2018-07-20), the gpgconf call which kills gpg-agent was copied
from the existing gpg setup code.
The reason for killing gpg-agent is given in 29ff1f8f74 ("t: lib-gpg:
flush gpg agent on startup", 2017-07-20):
When running gpg-relevant tests, a gpg-daemon is spawned for each
GNUPGHOME used. This daemon may stay running after the test and cache
file descriptors for the trash directories, even after the trash
directory is removed. This leads to ENOENT errors when attempting to
create files if tests are run multiple times.
Add a cleanup script to force flushing the gpg-agent for that GNUPGHOME
(if any) before setting up the GPG relevant-environment.
Killing gpg-agent once per test is sufficient.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When gpgsm is installed, lib-gpg.sh attempts to update trustlist.txt to
relax the checking of some root certificate requirements. The path to
"${GNUPGHOME}" contains spaces which cause an "ambiguous redirect"
warning when bash is used to run the tests:
$ bash t7030-verify-tag.sh
/git/t/lib-gpg.sh: line 66: ${GNUPGHOME}/trustlist.txt: ambiguous redirect
ok 1 - create signed tags
ok 2 # skip create signed tags x509 (missing GPGSM)
...
No warning is issued when using bash called as /bin/sh, dash, or mksh.
Quote the path to ensure the redirect works as intended and sets the
GPGSM prereq. While we're here, drop the space after ">>".
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git --work-tree=$there --git-dir=$here describe --dirty" did not
work correctly as it did not pay attention to the location of the
worktree specified by the user by mistake, which has been
corrected.
* ss/describe-dirty-in-the-right-directory:
t6120: test for describe with a bare repository
describe: setup working tree for --dirty
|
|
Code clean-up.
* jk/loose-object-cache-oid:
prefer "hash mismatch" to "sha1 mismatch"
sha1-file: avoid "sha1 file" for generic use in messages
sha1-file: prefer "loose object file" to "sha1 file" in messages
sha1-file: drop has_sha1_file()
convert has_sha1_file() callers to has_object_file()
sha1-file: convert pass-through functions to object_id
sha1-file: modernize loose header/stream functions
sha1-file: modernize loose object file functions
http: use struct object_id instead of bare sha1
update comment references to sha1_object_info()
sha1-file: fix outdated sha1 comment references
|
|
"git rebase -x $cmd" did not reject multi-line command, even though
the command is incapable of handling such a command. It now is
rejected upfront.
* pw/rebase-x-sanity-check:
rebase -x: sanity check command
|
|
Prepare to run test suite on Azure Pipeline.
* js/vsts-ci: (22 commits)
test-date: drop unused parameter to getnanos()
ci: parallelize testing on Windows
ci: speed up Windows phase
tests: optionally skip bin-wrappers/
t0061: workaround issues with --with-dashes and RUNTIME_PREFIX
tests: add t/helper/ to the PATH with --with-dashes
mingw: try to work around issues with the test cleanup
tests: include detailed trace logs with --write-junit-xml upon failure
tests: avoid calling Perl just to determine file sizes
README: add a build badge (status of the Azure Pipelines build)
mingw: be more generous when wrapping up the setitimer() emulation
ci: use git-sdk-64-minimal build artifact
ci: add a Windows job to the Azure Pipelines definition
Add a build definition for Azure DevOps
ci/lib.sh: add support for Azure Pipelines
tests: optionally write results as JUnit-style .xml
test-date: add a subcommand to measure times in shell scripts
ci: use a junction on Windows instead of a symlink
ci: inherit --jobs via MAKEFLAGS in run-build-and-tests
ci/lib.sh: encapsulate Travis-specific things
...
|
|
The documentation of "git commit-tree" said that the command
understands "--gpg-sign" in addition to "-S", but the command line
parser did not know about the longhand, which has been corrected.
* br/commit-tree-fully-spelled-gpg-sign-option:
commit-tree: add missing --gpg-sign flag
t7510: invoke git as part of &&-chain
|
|
"git pack-objects" learned another algorithm to compute the set of
objects to send, that trades the resulting packfile off to save
traversal cost to favor small pushes.
* ds/push-sparse-tree-walk:
pack-objects: create GIT_TEST_PACK_SPARSE
pack-objects: create pack.useSparse setting
revision: implement sparse algorithm
list-objects: consume sparse tree walk
revision: add mark_tree_uninteresting_sparse
|
|
The test lint learned to catch non-portable "sed" options.
* tb/test-lint-sed-options:
test-lint: only use only sed [-n] [-e command] [-f command_file]
|
|
A new date format "--date=human" that morphs its output depending
on how far the time is from the current time has been introduced.
"--date=auto" can be used to use this new format when the output is
going to the pager or to the terminal and otherwise the default
format.
* lt/date-human:
Add `human` date format tests.
Add `human` format to test-tool
Add 'human' date format documentation
Replace the proposed 'auto' mode with 'auto:'
Add 'human' date format
|
|
Code cleanup.
* jk/unused-parameter-cleanup:
convert: drop path parameter from actual conversion functions
convert: drop len parameter from conversion checks
config: drop unused parameter from maybe_remove_section()
show_date_relative(): drop unused "tz" parameter
column: drop unused "opts" parameter in item_length()
create_bundle(): drop unused "header" parameter
apply: drop unused "def" parameter from find_name_gnu()
match-trees: drop unused path parameter from score functions
|
|
The assumption to work on the single "in-core index" instance has
been reduced from the library-ish part of the codebase.
* nd/the-index-final:
cache.h: flip NO_THE_INDEX_COMPATIBILITY_MACROS switch
read-cache.c: remove the_* from index_has_changes()
merge-recursive.c: remove implicit dependency on the_repository
merge-recursive.c: remove implicit dependency on the_index
sha1-name.c: remove implicit dependency on the_index
read-cache.c: replace update_index_if_able with repo_&
read-cache.c: kill read_index()
checkout: avoid the_index when possible
repository.c: replace hold_locked_index() with repo_hold_locked_index()
notes-utils.c: remove the_repository references
grep: use grep_opt->repo instead of explict repo argument
|
|
More code in "git bisect" has been rewritten in C.
* tt/bisect-in-c:
bisect--helper: `bisect_start` shell function partially in C
bisect--helper: `get_terms` & `bisect_terms` shell function in C
bisect--helper: `bisect_next_check` shell function in C
bisect--helper: `check_and_set_terms` shell function in C
wrapper: move is_empty_file() and rename it as is_empty_or_missing_file()
bisect--helper: `bisect_write` shell function in C
bisect--helper: `bisect_reset` shell function in C
|
|
A new encoding UTF-16LE-BOM has been invented to force encoding to
UTF-16 with BOM in little endian byte order, which cannot be directly
generated by using iconv.
* tb/utf-16-le-with-explicit-bom:
Support working-tree-encoding "UTF-16LE-BOM"
|
|
"git cat-file --batch" reported a dangling symbolic link by
mistake, when it wanted to report that a given name is ambiguous.
* dt/cat-file-batch-ambiguous:
t1512: test ambiguous cat-file --batch and --batch-output
Do not print 'dangling' for cat-file in case of ambiguity
|
|
"git rebase --merge" as been reimplemented by reusing the internal
machinery used for "git rebase -i".
* en/rebase-merge-on-sequencer:
rebase: implement --merge via the interactive machinery
rebase: define linearization ordering and enforce it
git-legacy-rebase: simplify unnecessary triply-nested if
git-rebase, sequencer: extend --quiet option for the interactive machinery
am, rebase--merge: do not overlook --skip'ed commits with post-rewrite
t5407: add a test demonstrating how interactive handles --skip differently
rebase: fix incompatible options error message
rebase: make builtin and legacy script error messages the same
|
|
The git-p4 login ticket expiry test causes unreliable test
runs. Since the handling of ticket expiry in git-p4 is far
from polished anyway, let's remove it for now.
A better way to actually run the test is to create a python
"fake" version of "p4" which returns whatever expiry results
the test requires.
Ideally git-p4 would look at the expiry time before starting
any long operations, and cleanup gracefully if there is not
enough time left. But that's quite hard to do.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a smart HTTP server sends an error message via pkt-line, we detect
the error due to using PACKET_READ_DIE_ON_ERR_PACKET. This case was
added by 2d103c31c2 (pack-protocol.txt: accept error packets in any
context, 2018-12-29), but not covered by tests.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The getnanos() helper always gets the current time from our
getnanotime() facility. The caller cannot override it via TEST_DATE_NOW,
and hence we simply ignore the "now" parameter to the function. Let's
remove it, as it may mislead callers into thinking it does something.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch was contributed only as a tentative "we could introduce a
convenient short option if we do not want to change the default behavior
in the long run" patch, opening the discussion whether other people
agree with deprecating the current behavior in favor of the rescheduling
behavior.
But the consensus on the Git mailing list was that it would make sense
to show a warning in the near future, and flip the default
rebase.rescheduleFailedExec to reschedule failed `exec` commands by
default. See e.g.
<CAGZ79kZL5CRqCDRb6B-EedUm8Z_i4JuSF2=UtwwdRXMitrrOBw@mail.gmail.com>
So let's back out that patch that added the `-y` short option that we
agreed was not necessary or desirable.
This reverts commit 81ef8ee75d5f348d3c71ff633d13d302124e1a5e.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When GIT_SEQUENCE_EDITOR is set, the command was incorrectly
started when modes of "git rebase" that implicitly uses the
machinery for the interactive rebase are run, which has been
corrected.
* pw/no-editor-in-rebase-i-implicit:
implicit interactive rebase: don't run sequence editor
|
|
"git diff --color-moved --cc --stat -p" did not work well due to
funny interaction between a bug in color-moved and the rest, which
has been fixed.
* jk/diff-cc-stat-fixes:
combine-diff: treat --dirstat like --stat
combine-diff: treat --summary like --stat
combine-diff: treat --shortstat like --stat
combine-diff: factor out stat-format mask
diff: clear emitted_symbols flag after use
t4006: resurrect commented-out tests
|
|
"git checkout -b <new> [HEAD]" to create a new branch from the
current commit and check it out ought to be a no-op in the index
and the working tree in normal cases, but there are corner cases
that do require updates to the index and the working tree. Running
it immediately after "git clone --no-checkout" is one of these
cases that an earlier optimization kicked in incorrectly, which has
been fixed.
* bp/checkout-new-branch-optim:
checkout: fix regression in checkout -b on intitial checkout
checkout: add test demonstrating regression with checkout -b on initial commit
|
|
Asking "git check-attr" about a macro (e.g. "binary") on a specific
path did not work correctly, even though "git check-attr -a" listed
such a macro correctly. This has been corrected.
* jk/attr-macro-fix:
attr: do not mark queried macros as unset
|
|
Test fix for Windows.
* js/test-git-installed:
tests: explicitly use `test-tool.exe` on Windows
|
|
On a case-insensitive filesystem, we failed to compare the part of
the path that is above the worktree directory in an absolute
pathname, which has been corrected.
* js/abspath-part-inside-repo:
abspath_part_inside_repo: respect core.ignoreCase
|
|
Fix namespace support in protocol v2.
* jt/namespaced-ls-refs-fix:
ls-refs: filter refs using namespace-stripped name
|
|
The codepath to show progress meter while writing out commit-graph
file has been improved.
* ab/commit-graph-write-progress:
commit-graph write: emit a percentage for all progress
commit-graph write: add itermediate progress
commit-graph write: remove empty line for readability
commit-graph write: add more descriptive progress output
commit-graph write: show progress for object search
commit-graph write: more descriptive "writing out" output
commit-graph write: add "Writing out" progress output
commit-graph: don't call write_graph_chunk_extra_edges() unnecessarily
commit-graph: rename "large edges" to "extra edges"
|
|
Test update.
* js/t6042-timing-fix:
t6042: work around speed optimization on Windows
|
|
"git add --ignore-errors" did not work as advertised and instead
worked as an unintended synonym for "git add --renormalize", which
has been fixed.
* jk/add-ignore-errors-bit-assignment-fix:
add: use separate ADD_CACHE_RENORMALIZE flag
|
|
In Git for Windows, "git clone \\server\share\path" etc. that uses
UNC paths from command line had bad interaction with its shell
emulation.
* js/mingw-unc-path-w-backslashes:
mingw: special-case arguments to `sh`
mingw (t5580): document bug when cloning from backslashed UNC paths
|
|
An obvious typo in an assertion error message has been fixed.
* cc/test-ref-store-typofix:
helper/test-ref-store: fix "new-sha1" vs "old-sha1" typo
|
|
"git fetch" and "git upload-pack" learned to send all exchange over
the sideband channel while talking the v2 protocol.
* jt/fetch-v2-sideband:
tests: define GIT_TEST_SIDEBAND_ALL
{fetch,upload}-pack: sideband v2 fetch response
sideband: reverse its dependency on pkt-line
pkt-line: introduce struct packet_writer
pack-protocol.txt: accept error packets in any context
Use packet_reader instead of packet_read_line
|
|
The codepath to read from the commit-graph file attempted to read
past the end of it when the file's table-of-contents was corrupt.
* js/commit-graph-chunk-table-fix:
Makefile: correct example fuzz build
commit-graph: fix buffer read-overflow
commit-graph, fuzz: add fuzzer for commit-graph
|
|
"git p4" failed to update a shelved change when there were moved
files, which has been corrected.
* ld/git-p4-shelve-update-fix:
git-p4: handle update of moved/copied files when updating a shelve
git-p4: add failing test for shelved CL update involving move/copy
|
|
Update the protocol message specification to allow only the limited
use of scaled quantities. This is ensure potential compatibility
issues will not go out of hand.
* js/filter-options-should-use-plain-int:
filter-options: expand scaled numbers
tree:<depth>: skip some trees even when collecting omits
list-objects-filter: teach tree:# how to handle >0
|
|
The in-core repository instances are passed through more codepaths.
* sb/more-repo-in-api: (23 commits)
t/helper/test-repository: celebrate independence from the_repository
path.h: make REPO_GIT_PATH_FUNC repository agnostic
commit: prepare free_commit_buffer and release_commit_memory for any repo
commit-graph: convert remaining functions to handle any repo
submodule: don't add submodule as odb for push
submodule: use submodule repos for object lookup
pretty: prepare format_commit_message to handle arbitrary repositories
commit: prepare logmsg_reencode to handle arbitrary repositories
commit: prepare repo_unuse_commit_buffer to handle any repo
commit: prepare get_commit_buffer to handle any repo
commit-reach: prepare in_merge_bases[_many] to handle any repo
commit-reach: prepare get_merge_bases to handle any repo
commit-reach.c: allow get_merge_bases_many_0 to handle any repo
commit-reach.c: allow remove_redundant to handle any repo
commit-reach.c: allow merge_bases_many to handle any repo
commit-reach.c: allow paint_down_to_common to handle any repo
commit: allow parse_commit* to handle any repo
object: parse_object to honor its repository argument
object-store: prepare has_{sha1, object}_file to handle any repo
object-store: prepare read_object_file to deal with any repo
...
|
|
This ensures that nothing breaks the basic functionality of describe for
bare repositories. Please note that --broken and --dirty need a working
tree.
Signed-off-by: Sebastian Staudt <koraktor@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We don't use NEED_WORK_TREE when running the git-describe builtin,
since you should be able to describe a commit even in a bare repository.
However, the --dirty flag does need a working tree. Since we don't call
setup_work_tree(), it uses whatever directory we happen to be in. That's
unlikely to match our index, meaning we'd say "dirty" even when the real
working tree is clean.
We can fix that by calling setup_work_tree() once we know that the user
has asked for --dirty.
The --broken option also needs a working tree. But because its
implementation calls git-diff-index we don‘t have to setup the working
tree in the git-describe process.
Signed-off-by: Sebastian Staudt <koraktor@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test the new "ambiguous" result from cat-file --batch and
--batch-check. This is in t1512 instead of t1006 since
we need a repo with ambiguous object_id names.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Users who want UTF-16 files in the working tree set the .gitattributes
like this:
test.txt working-tree-encoding=UTF-16
The unicode standard itself defines 3 allowed ways how to encode UTF-16.
The following 3 versions convert all back to 'g' 'i' 't' in UTF-8:
a) UTF-16, without BOM, big endian:
$ printf "\000g\000i\000t" | iconv -f UTF-16 -t UTF-8 | od -c
0000000 g i t
b) UTF-16, with BOM, little endian:
$ printf "\377\376g\000i\000t\000" | iconv -f UTF-16 -t UTF-8 | od -c
0000000 g i t
c) UTF-16, with BOM, big endian:
$ printf "\376\377\000g\000i\000t" | iconv -f UTF-16 -t UTF-8 | od -c
0000000 g i t
Git uses libiconv to convert from UTF-8 in the index into ITF-16 in the
working tree.
After a checkout, the resulting file has a BOM and is encoded in "UTF-16",
in the version (c) above.
This is what iconv generates, more details follow below.
iconv (and libiconv) can generate UTF-16, UTF-16LE or UTF-16BE:
d) UTF-16
$ printf 'git' | iconv -f UTF-8 -t UTF-16 | od -c
0000000 376 377 \0 g \0 i \0 t
e) UTF-16LE
$ printf 'git' | iconv -f UTF-8 -t UTF-16LE | od -c
0000000 g \0 i \0 t \0
f) UTF-16BE
$ printf 'git' | iconv -f UTF-8 -t UTF-16BE | od -c
0000000 \0 g \0 i \0 t
There is no way to generate version (b) from above in a Git working tree,
but that is what some applications need.
(All fully unicode aware applications should be able to read all 3 variants,
but in practise we are not there yet).
When producing UTF-16 as an output, iconv generates the big endian version
with a BOM. (big endian is probably chosen for historical reasons).
iconv can produce UTF-16 files with little endianess by using "UTF-16LE"
as encoding, and that file does not have a BOM.
Not all users (especially under Windows) are happy with this.
Some tools are not fully unicode aware and can only handle version (b).
Today there is no way to produce version (b) with iconv (or libiconv).
Looking into the history of iconv, it seems as if version (c) will
be used in all future iconv versions (for compatibility reasons).
Solve this dilemma and introduce a Git-specific "UTF-16LE-BOM".
libiconv can not handle the encoding, so Git pick it up, handles the BOM
and uses libiconv to convert the rest of the stream.
(UTF-16BE-BOM is added for consistency)
Rported-by: Adrián Gimeno Balaguer <adrigibal@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user gives an empty argument to --exec then git creates a todo
list that it cannot parse. The rebase starts to run before erroring out
with
error: missing arguments for exec
error: invalid line 2: exec
You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'.
Or you can abort the rebase with 'git rebase --abort'.
Instead check for empty commands before starting the rebase.
Also check that the command does not contain any newlines as the
todo-list format is unable to cope with multiline commands. Note that
this changes the behavior, before this change one could do
git rebase --exec='echo one
exec echo two'
and it would insert two exec lines in the todo list, now it will error
out.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Custom userformat "log --format" learned %S atom that stands for
the tip the traversal reached the commit from, i.e. --source.
* it/log-format-source:
log: add %S option (like --source) to log --format
|
|
"git fetch --deepen=<more>" has been corrected to work over v2
protocol.
* jt/upload-pack-deepen-relative-proto-v2:
upload-pack: teach deepen-relative in protocol v2
fetch-pack: do not take shallow lock unnecessarily
|
|
Debugging help for http transport.
* ms/http-no-more-failonerror:
test: test GIT_CURL_VERBOSE=1 shows an error
remote-curl: unset CURLOPT_FAILONERROR
remote-curl: define struct for CURLOPT_WRITEFUNCTION
http: enable keep_error for HTTP requests
http: support file handles for HTTP_KEEP_ERROR
|
|
"git rebase" internally runs "checkout" to switch between branches,
and the command used to call the post-checkout hook, but the
reimplementation stopped doing so, which is getting fixed.
* os/rebase-runs-post-checkout-hook:
rebase: run post-checkout hook on checkout
t5403: simplify by using a single repository
|
|
Add sha-256 hash and plug it through the code to allow building Git
with the "NewHash".
* bc/sha-256:
hash: add an SHA-256 implementation using OpenSSL
sha256: add an SHA-256 implementation using libgcrypt
Add a base implementation of SHA-256 support
commit-graph: convert to using the_hash_algo
t/helper: add a test helper to compute hash speed
sha1-file: add a constant for hash block size
t: make the sha1 test-tool helper generic
t: add basic tests for our SHA-1 implementation
cache: make hashcmp and hasheq work with larger hashes
hex: introduce functions to print arbitrary hashes
sha1-file: provide functions to look up hash algorithms
sha1-file: rename algorithm to "sha1"
|
|
"git fetch --recurse-submodules" may not fetch the necessary commit
that is bound to the superproject, which is getting corrected.
* sb/submodule-recursive-fetch-gets-the-tip:
fetch: ensure submodule objects fetched
submodule.c: fetch in submodules git directory instead of in worktree
submodule: migrate get_next_submodule to use repository structs
repository: repo_submodule_init to take a submodule struct
submodule: store OIDs in changed_submodule_names
submodule.c: tighten scope of changed_submodule_names struct
submodule.c: sort changed_submodule_names before searching it
submodule.c: fix indentation
sha1-array: provide oid_array_filter
|
|
"git fetch-pack" now can talk the version 2 protocol.
* jt/fetch-pack-v2:
fetch-pack: support protocol version 2
|
|
The v2 upload-pack protocol implementation failed to honor
hidden-ref configuration, which has been corrected.
An earlier attempt reverted out of 'next'.
* jk/proto-v2-hidden-refs-fix:
upload-pack: support hidden refs with protocol v2
|
|
"git diff --color-moved-ws" updates.
* pw/diff-color-moved-ws-fix:
diff --color-moved-ws: handle blank lines
diff --color-moved-ws: modify allow-indentation-change
diff --color-moved-ws: optimize allow-indentation-change
diff --color-moved=zebra: be stricter with color alternation
diff --color-moved-ws: fix false positives
diff --color-moved-ws: demonstrate false positives
diff: allow --no-color-moved-ws
Use "whitespace" consistently
diff: document --no-color-moved
|
|
"git rebase -i" learned to re-execute a command given with 'exec'
to run after it failed the last time.
* js/rebase-i-redo-exec:
rebase: introduce a shortcut for --reschedule-failed-exec
rebase: add a config option to default to --reschedule-failed-exec
rebase: introduce --reschedule-failed-exec
|
|
When using `human` several fields are suppressed depending on the time
difference between the reference date and the local computer date. In
cases where the difference is less than a year, the year field is
supppressed. If the time is less than a day; the month and year is
suppressed.
Use TEST_DATE_NOW environment variable when using the test-tool to
hold the expected output strings constant.
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add the human format support to the test tool so that
GIT_TEST_DATE_NOW can be used to specify the current time.
The get_time() helper function was created and and checks the
GIT_TEST_DATE_NOW environment variable. If GIT_TEST_DATE_NOW is set,
then that date is used instead of the date returned by by
gettimeofday().
All calls to gettimeofday() were replaced by calls to get_time().
Renamed occurances of TEST_DATE_NOW to GIT_TEST_DATE_NOW since the
variable is now used in the get binary and not just in the test-tool.
Signed-off-by: Stephen P. Smith <ischis2@cox.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The fact that Git's test suite is implemented in Unix shell script that
is as portable as we can muster, combined with the fact that Unix shell
scripting is foreign to Windows (and therefore has to be emulated),
results in pretty abysmal speed of the test suite on that platform, for
pretty much no other reason than that language choice.
For comparison: while the Linux build & test is typically done within
about 8 minutes, the Windows build & test typically lasts about 80
minutes in Azure Pipelines.
To help with that, let's use the Azure Pipeline feature where you can
parallelize jobs, make jobs depend on each other, and pass artifacts
between them.
The tests are distributed using the following heuristic: listing all
test scripts ordered by size in descending order (as a cheap way to
estimate the overall run time), every Nth script is run (where N is the
total number of parallel jobs), starting at the index corresponding to
the parallel job. This slicing is performed by a new function that is
added to the `test-tool`.
To optimize the overall runtime of the entire Pipeline, we need to move
the Windows jobs to the beginning (otherwise there would be a very
decent chance for the Pipeline to be run only the Windows build, while
all the parallel Windows test jobs wait for this single one).
We use Azure Pipelines Artifacts for both the minimal Git for Windows
SDK as well as the built executables, as deduplication and caching close
to the agents makes that really fast. For comparison: while downloading
and unpacking the minimal Git for Windows SDK via PowerShell takes only
one minute (down from anywhere between 2.5 to 7 when using a shallow
clone), uploading it as Pipeline Artifact takes less than 30s and
downloading and unpacking less than 20s (sometimes even as little as
only twelve seconds).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This speeds up the tests by a bit on Windows, where running Unix shell
scripts (and spawning processes) is not exactly a cheap operation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When building Git with RUNTIME_PREFIX and starting a test helper from
t/helper/, it fails to detect a system prefix. The reason is that the
RUNTIME_PREFIX feature wants to use the location of the Git executable
to determine where the support files can be found, e.g. system-wide Git
config or the translations. This does not make any sense for the test
helpers, though, as they are distinctly not in a directory structure
resembling the final installation location of Git.
That is the reason why the test helpers rely on environment variables to
indicate the location of the needed support files, e.g.
GIT_TEXTDOMAINDIR. If this information is missing, the output will
contain warnings like this one:
RUNTIME_PREFIX requested, but prefix computation failed. [...]
In t0061, we did not expect that to happen, and it actually does not
happen in the regular case, because bin-wrappers/test-tool specifically
sets GIT_TEXTDOMAINDIR (and as a consequence, nothing in test-tool needs
to know anything about any runtime prefix).
However, with --with-dashes, bin-wrappers/test-tool is no longer called,
but t/helper/test-tool is called directly instead.
So let's just ignore the RUNTIME_PREFIX warning.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We really need to be able to find the test helpers... Really. This
change was forgotten when we moved the test helpers into t/helper/
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It seems that every once in a while in the Git for Windows SDK, there
are some transient file locking issues preventing the test clean up to
delete the trash directory. Let's be gentle and try again five seconds
later, and only error out if it still fails the second time.
This change helps Windows, and does not hurt any other platform
(normally, it is highly unlikely that said deletion fails, and if it
does, normally it will fail again even 5 seconds later).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The JUnit XML format lends itself to be presented in a powerful UI,
where you can drill down to the information you are interested in very
quickly.
For test failures, this usually means that you want to see the detailed
trace of the failing tests.
With Travis CI, we passed the `--verbose-log` option to get those
traces. However, that seems excessive, as we do not need/use the logs in
almost all of those cases: only when a test fails do we have a way to
include the trace.
So let's do something different when using Azure DevOps: let's run all
the tests with `--quiet` first, and only if a failure is encountered,
try to trace the commands as they are executed.
Of course, we cannot turn on `--verbose-log` after the fact. So let's
just re-run the test with all the same options, adding `--verbose-log`.
And then munging the output file into the JUnit XML on the fly.
Note: there is an off chance that re-running the test in verbose mode
"fixes" the failures (and this does happen from time to time!). That is
a possibility we should be able to live with. Ideally, we would label
this as "Passed upon rerun", and Azure Pipelines even know about that
outcome, but it is not available when using the JUnit XML format for
now:
https://github.com/Microsoft/azure-pipelines-agent/blob/master/src/Agent.Worker/TestResults/JunitResultReader.cs
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is a bit ridiculous to spin up a full-blown Perl instance (especially
on Windows, where that means spinning up a full POSIX emulation layer,
AKA the MSYS2 runtime) just to tell how large a given file is.
So let's just use the test-tool to do that job instead.
This command will also be used over the next commits, to allow for
cutting out individual test cases' verbose log from the file generated
via --verbose-log.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This will come in handy when publishing the results of Git's test suite
during an automated Azure DevOps run.
Note: we need to make extra sure that invalid UTF-8 encoding is turned
into valid UTF-8 (using the Replacement Character, \uFFFD) because
t9902's trace contains such invalid byte sequences, and the task in the
Azure Pipeline that uploads the test results would refuse to do anything
if it was asked to parse an .xml file with invalid UTF-8 in it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
From `man sed` (on a Mac OS X box):
The -E, -a and -i options are non-standard FreeBSD extensions and may not be available
on other operating systems.
From `man sed` on a Linux box:
REGULAR EXPRESSIONS
POSIX.2 BREs should be supported, but they aren't completely because of
performance problems. The \n sequence in a regular expression matches the newline
character, and similarly for \a, \t, and other sequences.
The -E option switches to using extended regular expressions instead; the -E option
has been supported for years by GNU sed, and is now included in POSIX.
Well, there are still a lot of systems out there, which don't support it.
Beside that, IEEE Std 1003.1TM-2017, see
http://pubs.opengroup.org/onlinepubs/9699919799/
does not mention -E either.
To be on the safe side, don't allow -E (or -r, which is GNU).
Change check-non-portable-shell.pl to only accept the portable options:
sed [-n] [-e command] [-f command_file]
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the next commit, we want to teach Git's test suite to optionally
output test results in JUnit-style .xml files. These files contain
information about the time spent. So we need a way to measure time.
While we could use `date +%s` for that, this will give us only seconds,
i.e. very coarse-grained timings.
GNU `date` supports `date +%s.%N` (i.e. nanosecond-precision output),
but there is no equivalent in BSD `date` (read: on macOS, we would not
be able to obtain precise timings).
So let's introduce `test-tool date getnanos`, with an optional start
time, that outputs preciser values. Note that this might not actually
give us nanosecond precision on some platforms, but it will give us as
precise information as possible, without the portability issues of shell
commands.
Granted, it is a bit pointless to try measuring times accurately in
shell scripts, certainly to nanosecond precision. But it is better than
second-granularity.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If GIT_SEQUENCE_EDITOR is set then rebase runs it when executing
implicit interactive rebases which are supposed to appear
non-interactive to the user. Fix this by setting GIT_SEQUENCE_EDITOR=:
rather than GIT_EDITOR=:. A couple of tests relied on the old behavior
so they are updated to work with the new regime.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The timestamp we receive is in epoch time, so there's no need for a
timezone parameter to interpret it. The matching show_date() uses "tz"
to show dates in author local time, but relative dates show only the
absolute time difference. The author's location is irrelevant, barring
relativistic effects from using Git close to the speed of light.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently "--cc --dirstat" will show nothing for a merge. Like
--shortstat and --summary in the previous two patches, it probably makes
sense to treat it like we do --stat, and show a stat against the
first-parent.
This case is less obviously correct than for --shortstat and --summary,
as those are basically variants of --stat themselves. It's possible we
could develop a multi-parent combined dirstat format, in which case we
might regret defining this first-parent behavior. But the same could be
said for --stat, and in the 12+ years of it showing first-parent stats,
nobody has complained.
So showing the first-parent dirstat is at least _useful_, and if we
later develop a clever multi-parent stat format, we'd probably have to
deal with --stat anyway.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently "--cc --summary" on a merge shows nothing. Since we show "--cc
--stat" as a stat against the first parent, and because --summary is
typically used in combination with --stat, it makes sense to treat them
both the same way.
Note that we have to tweak t4013's setup a bit to test this case, as the
existing merges do not have any --summary results against their first
parent. But since the merge at the tip of 'master' does add and remove
files with respect to the second parent, we can just make a reversed
doppelganger merge where the parents are swapped.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The --stat of a combined diff is defined as the first-parent stat,
going all the way back to 965f803c32 (combine-diff: show diffstat with
the first parent., 2006-04-17).
Naturally, we gave --numstat the same treatment in 74e2abe5b7 (diff
--numstat, 2006-10-12).
But --shortstat, which is really just the final line of --stat, does
nothing, which produces confusing results:
$ git show --oneline --stat eab7584e37
eab7584e37 Merge branch 'en/show-ref-doc-fix'
Documentation/git-show-ref.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
$ git show --oneline --shortstat eab7584e37
eab7584e37 Merge branch 'en/show-ref-doc-fix'
[nothing! We'd expect to see the "1 file changed..." line]
This patch teaches combine-diff to treats the two formats identically.
Reported-by: David Turner <novalis@novalis.org>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There's an odd bug when "log --color-moved" is used with the combination
of "--cc --stat -p": the stat for merge commits is erroneously shown
with the diff of the _next_ commit.
The included test demonstrates the issue. Our history looks something
like this:
A-B-M--D
\ /
C
When we run "git log --cc --stat -p --color-moved" starting at D, we get
this sequence of events:
1. The diff for D is using -p, so diff_flush() calls into
diff_flush_patch_all_file_pairs(). There we see that o->color_moved
is in effect, so we point o->emitted_symbols to a static local
struct, causing diff_flush_patch() to queue the symbols instead of
actually writing them out.
We then do our move detection, emit the symbols, and clear the
struct. But we leave o->emitted_symbols pointing to our struct.
2. Next we compute the diff for M. This is a merge, so we use the
combined diff code. In find_paths_generic(), we compute the
pairwise diff between each commit and its parent. Normally this is
done with DIFF_FORMAT_NO_OUTPUT, since we're just looking for
intersecting paths. But since "--stat --cc" shows the first-parent
stat, and since we're computing that diff anyway, we enable
DIFF_FORMAT_DIFFSTAT for the first parent. This outputs the stat
information immediately, saving us from running a separate
first-parent diff later.
But where does that output go? Normally it goes directly to stdout,
but because o->emitted_symbols is set, we queue it. As a result, we
don't actually print the diffstat for the merge commit (yet), which
is wrong.
3. Next we compute the diff for C. We're actually showing a patch
again, so we end up in diff_flush_patch_all_file_pairs(), but this
time we have the queued stat from step 2 waiting in our struct.
We add new elements to it for C's diff, and then flush the whole
thing. And we see the diffstat from M as part of C's diff, which is
wrong.
So triggering the bug really does require the combination of all of
those options.
To fix it, we can simply restore o->emitted_symbols to NULL after
flushing it, so that it does not affect anything outside of
diff_flush_patch_all_file_pairs(). This intuitively makes sense, since
nobody outside of that function is going to bother flushing it, so we
would not want them to write to it either.
In fact, we could take this a step further and turn the local "esm"
struct into a non-static variable that goes away after the function
ends. However, since it contains a dynamically sized array, we benefit
from amortizing the cost of allocations over many calls. So we'll leave
it as static to retain that benefit.
But let's push the zero-ing of esm.nr into the conditional for "if
(o->emitted_symbols)" to make it clear that we do not expect esm to hold
any values if we did not just try to use it. With the code as it is
written now, if we did encounter such a case (which I think would be a
bug), we'd silently leak those values without even bothering to display
them. With this change, we'd at least eventually show them, and somebody
would notice.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This set of tests was added by 4434e6ba6c (tests: check --[short]stat
output after chmod, 2012-05-01), and is primarily about the handling of
binary versus text files.
Later, 74faaa16f0 (Fix "git diff --stat" for interesting - but empty -
file changes, 2012-10-17) changed the stat output so that the empty text
file is mentioned rather than omitted. That commit just comments out
these tests. There's no discussion in the commit message, but the
original email[1] says:
NOTE! This does break two of our tests, so we clearly did this on
purpose, or at least tested for it. I just uncommented the subtests
that this makes irrelevant, and changed the output of another one.
I don't think they're irrelevant, though. We should be testing this
"mode change only" case and making sure that it has the post-74faaa16f0
behavior. So this commit brings back those tests, with the current
expected output.
[1] https://public-inbox.org/git/CA+55aFz88GPJcfMSqiyY+u0Cdm48bEyrsTGxHVJbGsYsDg=Q5w@mail.gmail.com/
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
By default, index compat macros are off from now on, because they
could hide the_index dependency.
Only those in builtin can use it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When doing a 'checkout -b' do a full checkout including updating the working
tree when doing the initial checkout. As the new test involves an filesystem
access, do it later in the sequence to give chance to other cheaper tests to
leave early. This fixes the regression in behavior caused by fa655d8411
(checkout: optimize "git checkout -b <new_branch>", 2018-08-16).
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit fa655d8411 (checkout: optimize "git checkout -b <new_branch>",
2018-08-16) introduced an unintentional change in behavior for 'checkout -b'
after doing 'clone --no-checkout'. Add a test to demonstrate the changed
behavior to be used in a later patch to verify the fix.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Since 60a12722ac (attr: remove maybe-real, maybe-macro from git_attr,
2017-01-27), we will always mark an attribute macro (e.g., "binary")
that is specifically queried for as "unspecified", even though listing
_all_ attributes would display it at set. E.g.:
$ echo "* binary" >.gitattributes
$ git check-attr -a file
file: binary: set
file: diff: unset
file: merge: unset
file: text: unset
$ git check-attr binary file
file: binary: unspecified
The problem stems from an incorrect conversion of the optimization from
06a604e670 (attr: avoid heavy work when we know the specified attr is
not defined, 2014-12-28). There we tried in collect_some_attrs() to
avoid even looking at the attr_stack when the user has asked for "foo"
and we know that "foo" did not ever appear in any .gitattributes file.
It used a flag "maybe_real" in each attribute struct, where "real" meant
that the attribute appeared in an actual file (we have to make this
distinction because we also create an attribute struct for any names
that are being queried). But as explained in that commit message, the
meaning of "real" was tangled with some special cases around macros.
When 60a12722ac later refactored the macro code, it dropped maybe_real
entirely. This missed the fact that "maybe_real" could be unset for two
reasons: because of a macro, or because it was never found during
parsing. This had two results:
- the optimization in collect_some_attrs() ceased doing anything
meaningful, since it no longer kept track of "was it found during
parsing"
- worse, it actually kicked in when the caller _did_ ask about a macro
by name, causing us to mark it as unspecified
It should be possible to salvage this optimization, but let's start with
just removing the remnants. It hasn't been doing anything (except
creating bugs) since 60a12722ac, and nobody seems to have noticed the
performance regression. It's more important to fix the correctness
problem clearly first.
I've added two tests here. The second one actually shows off the bug.
The test of "check-attr -a" is not strictly necessary, but we currently
do not test attribute macros much, and the builtin "binary" not at all.
So this increases our general test coverage, as well as making sure we
didn't mess up this related case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 8abfdf44c882 (tests: explicitly use `git.exe` on Windows,
2018-11-14), we made sure to use the `.exe` file extension when
using an absolute path to `git.exe`, to avoid getting confused with a
file or directory in the same place that lacks said file extension.
For the same reason, we need to handle test-tool.exe the same way.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The optional 'Large Edge List' chunk of the commit graph file stores
parent information for commits with more than two parents, and the
names of most of the macros, variables, struct fields, and functions
related to this chunk contain the term "large edges", e.g.
write_graph_chunk_large_edges(). However, it's not a really great
term, as the edges to the second and subsequent parents stored in this
chunk are not any larger than the edges to the first and second
parents stored in the "main" 'Commit Data' chunk. It's the number of
edges, IOW number of parents, that is larger compared to non-merge and
"regular" two-parent merge commits. And indeed, two functions in
'commit-graph.c' have a local variable called 'num_extra_edges' that
refer to the same thing, and this "extra edges" term is much better at
describing these edges.
So let's rename all these references to "large edges" in macro,
variable, function, etc. names to "extra edges". There is a
GRAPH_OCTOPUS_EDGES_NEEDED macro as well; for the sake of consistency
rename it to GRAPH_EXTRA_EDGES_NEEDED.
We can do so safely without causing any incompatibility issues,
because the term "large edges" doesn't come up in the file format
itself in any form (the chunk's magic is {'E', 'D', 'G', 'E'}, there
is no 'L' in there), but only in the specification text. The string
"large edges", however, does come up in the output of 'git
commit-graph read' and in tests looking at its input, but that command
is explicitly documented as debugging aid, so we can change its output
and the affected tests safely.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Add --gpg-sign option in commit-tree, which was documented, but not
implemented, in 55ca3f99ae. Add tests for the --gpg-sign option.
Signed-off-by: Brandon Richardson <brandon1024.br@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If `git commit-tree HEAD^{tree}` fails on us and produces no output on
stdout, we will substitute that empty string and execute `git tag
ninth-unsigned`, i.e., we will tag HEAD rather than a newly created
object. But we are lucky: we have a signature on HEAD, so we should
eventually fail the next test, where we verify that "ninth-unsigned" is
indeed unsigned.
We have a similar problem a few lines later. If `git commit-tree -S`
fails with no output, we will happily tag HEAD as "tenth-signed". Here,
we are not so lucky. The tag ends up on the same commit as
"eighth-signed-alt", and that's a signed commit, so t7510-signed-commit
will pass, despite `git commit-tree -S` failing.
Make these `git commit-tree` invocations a direct part of the &&-chain,
so that we can rely less on luck and set a better example for future
tests modeled after this one. Fix a 9/10 copy/paste error while at it.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Brandon Richardson <brandon1024.br@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "--format=<placeholder>" option of for-each-ref, branch and tag
learned to show a few more traits of objects that can be learned by
the object_info API.
* ot/ref-filter-object-info:
ref-filter: give uintmax_t to format with %PRIuMAX
ref-filter: add docs for new options
ref-filter: add tests for deltabase
ref-filter: add deltabase option
ref-filter: add tests for objectsize:disk
ref-filter: add check for negative file size
ref-filter: add objectsize:disk option
|
|
Flaky tests can now be repeatedly run under load with the
"--stress" option.
* sg/stress-test:
test-lib: add the '--stress' option to run a test repeatedly under load
test-lib-functions: introduce the 'test_set_port' helper function
test-lib: set $TRASH_DIRECTORY earlier
test-lib: consolidate naming of test-results paths
test-lib: parse command line options earlier
test-lib: parse options in a for loop to keep $@ intact
test-lib: extract Bash version check for '-x' tracing
test-lib: translate SIGTERM and SIGHUP to an exit
|
|
An inherently racy test that caused intermittent failures has been
removed.
* tg/t5570-drop-racy-test:
Revert "t/lib-git-daemon: record daemon log"
t5570: drop racy test
|
|
"git cherry-pick -m1" was forbidden when picking a non-merge
commit, even though there _is_ parent number 1 for such a commit.
This was done to avoid mistakes back when "cherry-pick" was about
picking a single commit, but is no longer useful with "cherry-pick"
that can pick a range of commits. Now the "-m$num" option is
allowed when picking any commit, as long as $num names an existing
parent of the commit.
Technically this is a backward incompatible change; hopefully
nobody is relying on the error-checking behaviour.
* so/cherry-pick-always-allow-m1:
t3506: validate '-m 1 -ff' is now accepted for non-merge commits
t3502: validate '-m 1' argument is now accepted for non-merge commits
cherry-pick: do not error on non-merge commits when '-m 1' is specified
t3510: stop using '-m 1' to force failure mid-sequence of cherry-picks
|
|
"git worktree remove" and "git worktree move" refused to work when
there is a submodule involved. This has been loosened to ignore
uninitialized submodules.
* nd/worktree-remove-with-uninitialized-submodules:
worktree: allow to (re)move worktrees with uninitialized submodules
|
|
The test suite tried to see if it is run under bash, but the check
itself failed under some other implementations of shell (notably
under NetBSD). This has been corrected.
* sg/test-bash-version-fix:
test-lib: check Bash version for '-x' without using shell arrays
|
|
With zsh, "git cmd path<TAB>" was completed to "git cmd path name"
when the completed path has a special character like SP in it,
without any attempt to keep "path name" a single filename. This
has been fixed to complete it to "git cmd path\ name" just like
Bash completion does.
* cy/zsh-completion-SP-in-path:
completion: treat results of git ls-tree as file paths
zsh: complete unquoted paths with spaces correctly
|
|
The core.worktree setting in a submodule repository should not be
pointing at a directory when the submodule loses its working tree
(e.g. getting deinit'ed), but the code did not properly maintain
this invariant.
* sb/submodule-unset-core-worktree-when-worktree-is-lost:
submodule deinit: unset core.worktree
submodule--helper: fix BUG message in ensure_core_worktree
submodule: unset core.worktree if no working tree is present
submodule update: add regression test with old style setups
|
|
"git stripspace" should be usable outside a git repository, but
under the "-s" or "-c" mode, it didn't.
* jn/stripspace-wo-repository:
stripspace: allow -s/-c outside git repository
|
|
"git submodule update" ought to use a single job unless asked, but
by mistake used multiple jobs, which has been fixed.
* sb/submodule-fetchjobs-default-to-one:
submodule update: run at most one fetch job unless otherwise set
|
|
Code clean-up.
* nd/style-opening-brace:
style: the opening '{' of a function is in a separate line
|
|
The MSYS2 runtime does its best to emulate the command-line wildcard
expansion and de-quoting which would be performed by the calling Unix
shell on Unix systems.
Those Unix shell quoting rules differ from the quoting rules applying to
Windows' cmd and Powershell, making it a little awkward to quote
command-line parameters properly when spawning other processes.
In particular, git.exe passes arguments to subprocesses that are *not*
intended to be interpreted as wildcards, and if they contain
backslashes, those are not to be interpreted as escape characters, e.g.
when passing Windows paths.
Note: this is only a problem when calling MSYS2 executables, not when
calling MINGW executables such as git.exe. However, we do call MSYS2
executables frequently, most notably when setting the use_shell flag in
the child_process structure.
There is no elegant way to determine whether the .exe file to be
executed is an MSYS2 program or a MINGW one. But since the use case of
passing a command line through the shell is so prevalent, we need to
work around this issue at least when executing sh.exe.
Let's introduce an ugly, hard-coded test whether argv[0] is "sh", and
whether it refers to the MSYS2 Bash, to determine whether we need to
quote the arguments differently than usual.
That still does not fix the issue completely, but at least it is
something.
Incidentally, this also fixes the problem where `git clone \\server\repo`
failed due to incorrect handling of the backslashes when handing the path
to the git-upload-pack process.
Further, we need to take care to quote not only whitespace and
backslashes, but also curly brackets. As aliases frequently go through
the MSYS2 Bash, and as aliases frequently get parameters such as
HEAD@{yesterday}, this is really important. As an early version of this
patch broke this, let's make sure that this does not regress by adding a
test case for that.
Helped-by: Kim Gybels <kgybels@infogroep.be>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Due to a quirk in Git's method to spawn git-upload-pack, there is a
problem when passing paths with backslashes in them: Git will force the
command-line through the shell, which has different quoting semantics in
Git for Windows (being an MSYS2 program) than regular Win32 executables
such as git.exe itself.
The symptom is that the first of the two backslashes in UNC paths of the
form \\myserver\folder\repository.git is *stripped off*.
Document this bug by introducing a test case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a user fetches refs/heads/master from a repo with namespace "ns", the
remote is expected to (1) not send the real refs/heads/master, and (2)
send refs/namespaces/ns/refs/heads/master with the name
refs/heads/master. (1) indeed happens now, but not (2) - Git only sends
refs that have the user-given prefix, but it checks them against the
full name of the ref (the one starting with refs/namespaces), and not
the namespace-stripped one.
This is demonstrated by the patch in the test. Currently, it results in
"fatal: couldn't find remote ref refs/heads/master" despite both
unnamespaced and namespaced master being present. With the code change,
it produces the expected result.
Check the ref prefixes against the namespace-stripped name.
This bug was discovered through applying patches [1] that override
protocol.version to 2 in repositories when running tests, allowing us to
notice differences in behavior across different protocol versions.
[1] https://public-inbox.org/git/cover.1547677183.git.jonathantanmy@google.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the file system is case-insensitive, we really must be careful to
ignore differences in case only.
This fixes https://github.com/git-for-windows/git/issues/735
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Perforce requires a complete list of files being operated on. If
git is updating an existing shelved changelist, then any files
which are moved or copied were not being added to this list.
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Andrey Mazo <amazo@checkvideo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Updating a shelved P4 changelist where one or more files have
been moved or copied does not work. Add a test for this.
The problem is that P4 requires a complete list of the files being
changed, and move/copy only includes the _source_ in the case of
updating a shelved changelist. This results in errors from Perforce
such as:
//depot/src - needs tofile //depot/dst
Submit aborted -- fix problems then use 'p4 submit -c 1234'
Signed-off-by: Luke Diamand <luke@diamand.org>
Acked-by: Andrey Mazo <amazo@checkvideo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Create a test variable GIT_TEST_PACK_SPARSE to enable the sparse
object walk algorithm by default during the test suite. Enabling
this variable ensures coverage in many interesting cases, such as
shallow clones, partial clones, and missing objects.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The '--sparse' flag in 'git pack-objects' changes the algorithm
used to enumerate objects to one that is faster for individual
users pushing new objects that change only a small cone of the
working directory. The sparse algorithm is not recommended for a
server, which likely sends new objects that appear across the
entire working directory.
Create a 'pack.useSparse' setting that enables this new algorithm.
This allows 'git push' to use this algorithm without passing a
'--sparse' flag all the way through four levels of run_command()
calls.
If the '--no-sparse' flag is set, then this config setting is
overridden.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When enumerating objects to place in a pack-file during 'git
pack-objects --revs', we discover the "frontier" of commits
that we care about and the boundary with commit we find
uninteresting. From that point, we walk trees to discover which
trees and blobs are uninteresting. Finally, we walk trees from the
interesting commits to find the interesting objects that are
placed in the pack.
This commit introduces a new, "sparse" way to discover the
uninteresting trees. We use the perspective of a single user trying
to push their topic to a large repository. That user likely changed
a very small fraction of the paths in their working directory, but
we spend a lot of time walking all reachable trees.
The way to switch the logic to work in this sparse way is to start
caring about which paths introduce new trees. While it is not
possible to generate a diff between the frontier boundary and all
of the interesting commits, we can simulate that behavior by
inspecting all of the root trees as a whole, then recursing down
to the set of trees at each path.
We already had taken the first step by passing an oidset to
mark_trees_uninteresting_sparse(). We now create a dictionary
whose keys are paths and values are oidsets. We consider the set
of trees that appear at each path. While we inspect a tree, we
add its subtrees to the oidsets corresponding to the tree entry's
path. We also mark trees as UNINTERESTING if the tree we are
parsing is UNINTERESTING.
To actually improve the performance, we need to terminate our
recursion. If the oidset contains only UNINTERESTING trees, then
we do not continue the recursion. This avoids walking trees that
are likely to not be reachable from interesting trees. If the
oidset contains only interesting trees, then we will walk these
trees in the final stage that collects the intersting objects to
place in the pack. Thus, we only recurse if the oidset contains
both interesting and UNINITERESTING trees.
There are a few ways that this is not a universally better option.
First, we can pack extra objects. If someone copies a subtree
from one tree to another, the first tree will appear UNINTERESTING
and we will not recurse to see that the subtree should also be
UNINTERESTING. We will walk the new tree and see the subtree as
a "new" object and add it to the pack. A test is modified to
demonstrate this behavior and to verify that the new logic is
being exercised.
Second, we can have extra memory pressure. If instead of being a
single user pushing a small topic we are a server sending new
objects from across the entire working directory, then we will
gain very little (the recursion will rarely terminate early) but
will spend extra time maintaining the path-oidset dictionaries.
Despite these potential drawbacks, the benefits of the algorithm
are clear. By adding a counter to 'add_children_by_path' and
'mark_tree_contents_uninteresting', I measured the number of
parsed trees for the two algorithms in a variety of repos.
For git.git, I used the following input:
v2.19.0
^v2.19.0~10
Objects to pack: 550
Walked (old alg): 282
Walked (new alg): 130
For the Linux repo, I used the following input:
v4.18
^v4.18~10
Objects to pack: 518
Walked (old alg): 4,836
Walked (new alg): 188
The two repos above are rather "wide and flat" compared to
other repos that I have used in the past. As a comparison,
I tested an old topic branch in the Azure DevOps repo, which
has a much deeper folder structure than the Linux repo.
Objects to pack: 220
Walked (old alg): 22,804
Walked (new alg): 129
I used the number of walked trees the main metric above because
it is consistent across multiple runs. When I ran my tests, the
performance of the pack-objects command with the same options
could change the end-to-end time by 10x depending on the file
system being warm. However, by repeating the same test on repeat
I could get more consistent timing results. The git.git and
Linux tests were too fast overall (less than 0.5s) to measure
an end-to-end difference. The Azure DevOps case was slow enough
to see the time improve from 15s to 1s in the warm case. The
cold case was 90s to 9s in my testing.
These improvements will have even larger benefits in the super-
large Windows repository. In our experiments, we see the
"Enumerate objects" phase of pack-objects taking 60-80% of the
end-to-end time of non-trivial pushes, taking longer than the
network time to send the pack and the server time to verify the
pack.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When creating a pack-file using 'git pack-objects --revs' we provide
a list of interesting and uninteresting commits. For example, a push
operation would make the local topic branch be interesting and the
known remote refs as uninteresting. We want to discover the set of
new objects to send to the server as a thin pack.
We walk these commits until we discover a frontier of commits such
that every commit walk starting at interesting commits ends in a root
commit or unintersting commit. We then need to discover which
non-commit objects are reachable from uninteresting commits. This
commit walk is not changing during this series.
The mark_edges_uninteresting() method in list-objects.c iterates on
the commit list and does the following:
* If the commit is UNINTERSTING, then mark its root tree and every
object it can reach as UNINTERESTING.
* If the commit is interesting, then mark the root tree of every
UNINTERSTING parent (and all objects that tree can reach) as
UNINTERSTING.
At the very end, we repeat the process on every commit directly
given to the revision walk from stdin. This helps ensure we properly
cover shallow commits that otherwise were not included in the
frontier.
The logic to recursively follow trees is in the
mark_tree_uninteresting() method in revision.c. The algorithm avoids
duplicate work by not recursing into trees that are already marked
UNINTERSTING.
Add a new 'sparse' option to the mark_edges_uninteresting() method
that performs this logic in a slightly different way. As we iterate
over the commits, we add all of the root trees to an oidset. Then,
call mark_trees_uninteresting_sparse() on that oidset. Note that we
include interesting trees in this process. The current implementation
of mark_trees_unintersting_sparse() will walk the same trees as
the old logic, but this will be replaced in a later change.
Add a '--sparse' flag in 'git pack-objects' to call this new logic.
Add a new test script t/t5322-pack-objects-sparse.sh that tests this
option. The tests currently demonstrate that the resulting object
list is the same as the old algorithm. This includes a case where
both algorithms pack an object that is not needed by a remote due to
limits on the explored set of trees. When the sparse algorithm is
changed in a later commit, we will add a test that demonstrates a
change of behavior in some cases.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 9472935d81 (add: introduce "--renormalize", 2017-11-16) taught
git-add to pass HASH_RENORMALIZE to add_to_index(), which then passes
the flag along to index_path(). However, the flags taken by
add_to_index() and the ones taken by index_path() are distinct
namespaces. We cannot take HASH_* flags in add_to_index(), because they
overlap with the ADD_CACHE_* flags we already take (in this case,
HASH_RENORMALIZE conflicts with ADD_CACHE_IGNORE_ERRORS).
We can solve this by adding a new ADD_CACHE_RENORMALIZE flag, and using
it to set HASH_RENORMALIZE within add_to_index(). In order to make it
clear that these two flags come from distinct sets, let's also change
the name "newflags" in the function to "hash_flags".
Reported-by: Dmitriy Smirnov <dmitriy.smirnov@jetbrains.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When Git determines whether a file has changed, it looks at the mtime,
at the file size, and to detect changes even if the mtime is the same
(on Windows, the mtime granularity is 100ns, read: if two files are
written within the same 100ns time slot, they have the same mtime) and
even if the file size is the same, Git also looks at the inode/device
numbers.
This design obviously comes from a Linux background, where `lstat()`
calls were designed to be cheap.
On Windows, there is no `lstat()`. It has to be emulated. And while
obtaining the mtime and the file size is not all that expensive (you can
get both with a single `GetFileAttributesW()` call), obtaining the
equivalent of the inode and device numbers is very expensive (it
requires a call to `GetFileInformationByHandle()`, which in turn
requires a file handle, which is *a lot* more expensive than one might
imagine).
As it is very uncommon for developers to modify files within 100ns time
slots, Git for Windows chooses not to fill inode/device numbers
properly, but simply sets them to 0.
However, in t6042 the files file_v1 and file_v2 are typically written
within the same 100ns time slot, and they do not differ in file size. So
the minor modification is not picked up.
Let's work around this issue by avoiding the `git mv` calls in the
'mod6-setup: chains of rename/rename(1to2) and rename/rename(2to1)' test
case. The target files are overwritten anyway, so it is not like we
really rename those files. This fixes the issue because `git add` will
now add the files as new files (as opposed to existing, just renamed
files).
Functionally, we do not change anything because we replace two `git mv
<old> <new>` calls (where `<new>` is completely overwritten and `git
add`ed later anyway) by `git rm <old>` calls (removing other files, too,
that are also completely overwritten and `git add`ed later).
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Define a GIT_TEST_SIDEBAND_ALL environment variable meant to be used
from tests. When set to true, this overrides uploadpack.allowsidebandall
to true, allowing the entire test suite to be run as if this
configuration is in place for all repositories.
As of this patch, all tests pass whether GIT_TEST_SIDEBAND_ALL is unset
or set to 1.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It looks like it is a copy-paste error made in 80f2a6097c
(t/helper: add test-ref-store to test ref-store functions,
2017-03-26) to pass "old-sha1" instead of "new-sha1" to
notnull() when we get the new sha1 argument from
const char **argv.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
fuzz-commit-graph identified a case where Git will read past the end of
a buffer containing a commit graph if the graph's header has an
incorrect chunk count. A simple bounds check in parse_commit_graph()
prevents this.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When communicating with a remote server or a subprocess, use
expanded numbers rather than numbers with scaling suffix in the
object filter spec (e.g. "limit:blob=1k" becomes
"limit:blob=1024").
Update the protocol docs to note that clients should always perform this
expansion, to allow for more compatibility between server
implementations.
Signed-off-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a tree has already been recorded as omitted, we don't need to
traverse it again just to collect its omits. Stop traversing trees a
second time when collecting omits.
Signed-off-by: Matthew DeVore <matvore@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Implement positive values for <depth> in the tree:<depth> filter. The
exact semantics are described in Documentation/rev-list-options.txt.
The long-term goal at the end of this is to allow a partial clone to
eagerly fetch an entire directory of files by fetching a tree and
specifying <depth>=1. This, for instance, would make a build operation
fast and convenient. It is fast because the partial clone does not need
to fetch each file individually, and convenient because the user does
not need to supply a sparse-checkout specification.
Another way of considering this feature is as a way to reduce
round-trips, since the client can get any number of levels of
directories in a single request, rather than wait for each level of tree
objects to come back, whose entries are used to construct a new request.
Signed-off-by: Matthew DeVore <matvore@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Cygwin update.
* tb/use-common-win32-pathfuncs-on-cygwin:
git clone <url> C:\cygwin\home\USER\repo' is working (again)
|
|
"git log -G<regex>" looked for a hunk in the "git log -p" patch
output that contained a string that matches the given pattern.
Optimize this code to ignore binary files, which by default will
not show any hunk that would match any pattern (unless textconv or
the --text option is in effect, that is).
* tb/log-G-binary:
log -G: ignore binary files
|
|
Minor inconsistency fix.
* sb/diff-color-moved-config-option-fixup:
diff: align move detection error handling with other options
|
|
Lines that begin with a certain keyword that come over the wire, as
well as lines that consist only of one of these keywords, ought to
be painted in color for easier eyeballing, but the latter was
broken ever since the feature was introduced in 2.19, which has
been corrected.
* hn/highlight-sideband-keywords:
sideband: color lines with keyword only
|
|
BSD port update.
* cb/test-lint-cp-a:
tests: add lint for non portable cp -a
|
|
BSD port update.
* cb/t5004-empty-tar-archive-fix:
t5004: avoid using tar for empty packages
|
|
Test update.
* hb/t0061-dot-in-path-fix:
t0061: do not fail test if '.' is part of $PATH
|
|
"git checkout [<tree-ish>] path..." learned to report the number of
paths that have been checked out of the index or the tree-ish,
which gives it the same degree of noisy-ness as the case in which
the command checks out a branch.
* nd/checkout-noisy:
t0027: squelch checkout path run outside test_expect_* block
checkout: print something when checking out paths
|
|
The traversal over tree objects has learned to honor
":(attr:label)" pathspec match, which has been implemented only for
enumerating paths on the filesystem.
* nd/attr-pathspec-in-tree-walk:
tree-walk: support :(attr) matching
dir.c: move, rename and export match_attrs()
pathspec.h: clean up "extern" in function declarations
tree-walk.c: make tree_entry_interesting() take an index
tree.c: make read_tree*() take 'struct repository *'
|
|
"git rev-list --exclude-promisor-objects" had to take an object
that does not exist locally (and is lazily available) from the
command line without barfing, but the code dereferenced NULL.
* md/list-lazy-objects-fix:
list-objects.c: don't segfault for missing cmdline objects
|
|
* ms/packet-err-check:
pack-protocol.txt: accept error packets in any context
Use packet_reader instead of packet_read_line
|
|
Make it possible to write for example
git log --format="%H,%S"
where the %S at the end is a new placeholder that prints out the ref
(tag/branch) for each commit.
Using %d might seem like an alternative but it only shows the ref for the last
commit in the branch.
Signed-off-by: Issac Trotts <issactrotts@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This tests GIT_CURL_VERBOSE shows an error when an URL returns 500. This
exercises the code in remote_curl.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Commit 685fbd3291 ("fetch-pack: perform a fetch using v2", 2018-03-15)
attempted to teach Git deepen-relative in protocol v2 (among other
things), but it didn't work:
(1) fetch-pack.c needs to emit "deepen-relative".
(2) upload-pack.c needs to ensure that the correct deepen_relative
variable is passed to deepen() (there are two - the static variable
and the one in struct upload_pack_data).
(3) Before deepen() computes the list of reachable shallows, it first
needs to mark all "our" refs as OUR_REF. v2 currently does not do
this, because unlike v0, it is not needed otherwise.
Fix all this and include a test demonstrating that it works now. For
(2), the static variable deepen_relative is also eliminated, removing a
source of confusion.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Reviewed-by: Josh Steadmon <steadmon@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When fetching using protocol v2, the remote may send a "shallow-info"
section if the client is shallow. If so, Git as the client currently
takes the shallow file lock, even if the "shallow-info" section is
empty.
This is not a problem except that Git does not support taking the
shallow file lock after modifying the shallow file, because
is_repository_shallow() stores information that is never cleared. And
this take-after-modify occurs when Git does a tag-following fetch from a
shallow repository on a transport that does not support tag following
(since in this case, 2 fetches are performed).
To solve this issue, take the shallow file lock (and perform all other
shallow processing) only if the "shallow-info" section is non-empty;
otherwise, behave as if it were empty.
A full solution (probably, ensuring that any action of committing
shallow file locks also includes clearing the information stored by
is_repository_shallow()) would solve the issue without need for this
patch, but this patch is independently useful (as an optimization to
prevent writing a file in an unnecessary case), hence why I wrote it. I
have included a NEEDSWORK outlining the full solution.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the scaffolding for protocol version 2 was initially added in
8f6982b4e1 ("protocol: introduce enum protocol_version value
protocol_v2", 2018-03-14). As seen in:
git log -p -G'support for protocol v2 not implemented yet' --full-diff --reverse v2.17.0..v2.20.0
Many of those scaffolding "die" placeholders were removed, but we
hadn't gotten around to fetch-pack yet.
The test here for "fetch refs from cmdline" is very minimal. There's
much better coverage when running the entire test suite under the WIP
GIT_TEST_PROTOCOL_VERSION=2 mode[1], we should ideally have better
coverage without needing to invoke a special test mode.
1. https://public-inbox.org/git/20181213155817.27666-1-avarab@gmail.com/
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the v2 protocol, upload-pack's advertisement has been moved to the
"ls-refs" command. That command does not respect hidden-ref config (like
transfer.hiderefs) at all, and advertises everything.
While there are some features that are not supported in v2 (e.g., v2
always allows fetching any sha1 without respect to advertisements), the
lack of this feature is not documented and is likely just a bug. Let's
make it work, as otherwise upgrading a server to a v2-capable git will
start exposing these refs that the repository admin has asked to remain
hidden.
Note that we assume we're operating on behalf of a fetch here, since
that's the only thing implemented in v2 at this point. See the in-code
comment. We'll have to figure out how this works when the v2 push
protocol is designed (both here in ls-refs, but also rejecting updates
to hidden refs).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When using --color-moved-ws=allow-indentation-change allow lines with
the same indentation change to be grouped across blank lines. For now
this only works if the blank lines have been moved as well, not for
blocks that have just had their indentation changed.
This completes the changes to the implementation of
--color-moved=allow-indentation-change. Running
git diff --color-moved=allow-indentation-change v2.18.0 v2.19.0
now takes 5.0s. This is a saving of 41% from 8.5s for the optimized
version of the previous implementation and 66% from the original which
took 14.6s.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently diff --color-moved-ws=allow-indentation-change does not
support indentation that contains a mix of tabs and spaces. For
example in commit 546f70f377 ("convert.h: drop 'extern' from function
declaration", 2018-06-30) the function parameters in the following
lines are not colored as moved [1].
-extern int stream_filter(struct stream_filter *,
- const char *input, size_t *isize_p,
- char *output, size_t *osize_p);
+int stream_filter(struct stream_filter *,
+ const char *input, size_t *isize_p,
+ char *output, size_t *osize_p);
This commit changes the way the indentation is handled to track the
visual size of the indentation rather than the characters in the
indentation. This has the benefit that any whitespace errors do not
interfer with the move detection (the whitespace errors will still be
highlighted according to --ws-error-highlight). During the discussion
of this feature there were concerns about the correct detection of
indentation for python. However those concerns apply whether or not
we're detecting moved lines so no attempt is made to determine if the
indentation is 'pythonic'.
[1] Note that before the commit to fix the erroneous coloring of moved
lines each line was colored as a different block, since that commit
they are uncolored.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently when using --color-moved=zebra the color of moved blocks
depends on the number of lines separating them. This means that adding
an odd number of unmoved lines between blocks that are already separated
by one or more unmoved lines will change the color of subsequent moved
blocks. This does not make much sense as the blocks were already
separated by unmoved lines and causes problems when adding lines to test
cases.
Fix this by only using the alternate colors for adjacent moved blocks.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'diff --color-moved-ws=allow-indentation-change' can highlight lines
that have internal whitespace changes rather than indentation
changes. For example in commit 1a07e59c3e ("Update messages in
preparation for i18n", 2018-07-21) the lines
- die (_("must end with a color"));
+ die(_("must end with a color"));
are highlighted as moved when they should not be. Modify an existing
test to show the problem that will be fixed in the next commit.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To future-proof ourselves against a change in the hash, let's use the
more generic "hash mismatch" to refer to integrity problems. Note that
we do advertise this exact string in git-fsck(1). However, the message
itself is marked for translation, meaning we do not expect it to be
machine-readable.
While we're touching that documentation, let's also update it for
grammar and clarity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As part of an ongoing effort to make rebase have more uniform behavior,
modify the merge backend to behave like the interactive one, by
re-implementing it on top of the latter.
Interactive rebases are implemented in terms of cherry-pick rather than
the merge-recursive builtin, but cherry-pick also calls into the
recursive merge machinery by default and can accept special merge
strategies and/or special strategy options. As such, there really is
not any need for having both git-rebase--merge and
git-rebase--interactive anymore. Delete git-rebase--merge.sh and
instead implement it in builtin/rebase.c.
This results in a few deliberate but small user-visible changes:
* The progress output is modified (see t3406 and t3420 for examples)
* A few known test failures are now fixed (see t3421)
* bash-prompt during a rebase --merge is now REBASE-i instead of
REBASE-m. Reason: The prompt is a reflection of the backend in use;
this allows users to report an issue to the git mailing list with
the appropriate backend information, and allows advanced users to
know where to search for relevant control files. (see t9903)
testcase modification notes:
t3406: --interactive and --merge had slightly different progress output
while running; adjust a test to match the new expectation
t3420: these test precise output while running, but rebase--am,
rebase--merge, and rebase--interactive all were built on very
different commands (am, merge-recursive, cherry-pick), so the
tests expected different output for each type. Now we expect
--merge and --interactive to have the same output.
t3421: --interactive fixes some bugs in --merge! Wahoo!
t9903: --merge uses the interactive backend so the prompt expected is
now REBASE-i.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Uninitialized submodules have nothing valueable for us to be worried
about. They are just SHA-1. Let "worktree remove" and "worktree move"
continue in this case so that people can still use multiple worktrees
on repos with optional submodules that are never populated, like
sha1collisiondetection in git.git when checked out by doc-diff script.
Note that for "worktree remove", it is possible that a user
initializes a submodule (*), makes some commits (but not push), then
deinitializes it. At that point, the submodule is unpopulated, but the
precious new commits are still in
$GIT_COMMON_DIR/worktrees/<worktree>/modules/<submodule>
directory and we should not allow removing the worktree or we lose
those commits forever. The new directory check is added to prevent
this.
(*) yes they are screwed anyway by doing this since "git submodule"
would add submodule.* in $GIT_COMMON_DIR/config, which is shared
across multiple worktrees. But it does not mean we let them be
screwed even more.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Unfortunately, we have a few flaky tests, whose failures tend to be
hard to reproduce. We've found that the best we can do to reproduce
such a failure is to run the test script repeatedly while the machine
is under load, and wait in the hope that the load creates enough
variance in the timing of the test's commands that a failure is
evenually triggered. I have a command to do that, and I noticed that
two other contributors have rolled their own scripts to do the same,
all choosing slightly different approaches.
To help reproduce failures in flaky tests, introduce the '--stress'
option to run a test script repeatedly in multiple parallel jobs until
one of them fails, thereby using the test script itself to increase
the load on the machine.
The number of parallel jobs is determined by, in order of precedence:
the number specified as '--stress=<N>', or the value of the
GIT_TEST_STRESS_LOAD environment variable, or twice the number of
available processors (as reported by the 'getconf' utility), or 8.
Make '--stress' imply '--verbose -x --immediate' to get the most
information about rare failures; there is really no point in spending
all the extra effort to reproduce such a failure, and then not know
which command failed and why.
To prevent the several parallel invocations of the same test from
interfering with each other:
- Include the parallel job's number in the name of the trash
directory and the various output files under 't/test-results/' as
a '.stress-<Nr>' suffix.
- Add the parallel job's number to the port number specified by the
user or to the test number, so even tests involving daemons
listening on a TCP socket can be stressed.
- Redirect each parallel test run's verbose output to
't/test-results/$TEST_NAME.stress-<nr>.out', because dumping the
output of several parallel running tests to the terminal would
create a big ugly mess.
For convenience, print the output of the failed test job at the end,
and rename its trash directory to end with the '.stress-failed'
suffix, so it's easy to find in a predictable path (OTOH, all absolute
paths recorded in the trash directory become invalid; we'll see
whether this causes any issues in practice). If, in an unlikely case,
more than one jobs were to fail nearly at the same time, then print
the output of all failed jobs, and rename the trash directory of only
the last one (i.e. with the highest job number), as it is the trash
directory of the test whose output will be at the bottom of the user's
terminal.
Based on Jeff King's 'stress' script.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Several test scripts run daemons like 'git-daemon' or Apache, and
communicate with them through TCP sockets. To have unique ports where
these daemons are accessible, the ports are usually the number of the
corresponding test scripts, unless the user overrides them via
environment variables, and thus all those tests and test libs contain
more or less the same bit of one-liner boilerplate code to find out
the port. The last patch in this series will make this a bit more
complicated.
Factor out finding the port for a daemon into the common helper
function 'test_set_port' to avoid repeating ourselves.
Take special care of test scripts with "low" numbers:
- Test numbers below 1024 would result in a port that's only usable
as root, so set their port to '10000 + test-nr' to make sure it
doesn't interfere with other tests in the test suite. This makes
the hardcoded port number in 't0410-partial-clone.sh' unnecessary,
remove it.
- The shell's arithmetic evaluation interprets numbers with leading
zeros as octal values, which means that test number below 1000 and
containing the digits 8 or 9 will trigger an error. Remove all
leading zeros from the test numbers to prevent this.
Note that the 'git p4' tests are unlike the other tests involving
daemons in that:
- 'lib-git-p4.sh' doesn't use the test's number for unique port as
is, but does a bit of additional arithmetic on top [1].
- The port is not overridable via an environment variable.
With this patch even 'git p4' tests will use the test's number as
default port, and it will be overridable via the P4DPORT environment
variable.
[1] Commit fc00233071 (git-p4 tests: refactor and cleanup, 2011-08-22)
introduced that "unusual" unique port computation without
explaining why it was necessary (as opposed to simply using the
test number as is). It seems to be just unnecessary complication,
and in any case that commit came way before the "test nr as unique
port" got "standardized" for other daemons in commits c44132fcf3
(tests: auto-set git-daemon port, 2014-02-10), 3bb486e439 (tests:
auto-set LIB_HTTPD_PORT from test name, 2014-02-10), and
bf9d7df950 (t/lib-git-svn.sh: improve svnserve tests with parallel
make test, 2017-12-01).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A later patch in this series will need to know the path to the trash
directory early in 'test-lib.sh', but $TRASH_DIRECTORY is set much
later.
Set $TRASH_DIRECTORY earlier, where the other test-specific path
variables are set.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are two places where we strip off any leading path components
and the '.sh' suffix from the test script's pathname, and there are
four places where we construct the name of the 't/test-results'
directory or the name of various test-specific files in there. The
last patch in this series will add even more.
Factor these out into helper variables to avoid repeating ourselves.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'test-lib.sh' looks for the presence of certain options like '--tee'
and '--verbose-log', so it can execute the test script again to save
its standard output and error. It looks for '--valgrind' as well, to
set up some Valgrind-specific stuff. These all happen before the
actual option parsing loop, and the conditions looking for these
options look a bit odd, too. They are not completely correct, either,
because in a bogus invocation like './t1234-foo.sh -r --tee' they
recognize '--tee', although it should be handled as the required
argument of the '-r' option. This patch series will add two more
options to look out for early, and, in addition, will have to extract
these options' stuck arguments (i.e. '--opt=arg') as well.
So let's move the option parsing loop and the couple of related
conditions following it earlier in 'test-lib.sh', before the place
where the test script is executed again for '--tee' and its friends.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'test-lib.sh' looks for the presence of certain options like '--tee'
and '--verbose-log', so it can execute the test script again to save
its standard output and error, and to do so it needs the original
command line options the test was invoked with.
The next patch is about to move the option parsing loop earlier in
'test-lib.sh', but it is implemented using 'shift' in a while loop,
effecively destroying "$@" by the end of the option parsing. Not
good.
As a preparatory step, turn that option parsing loop into a 'for opt
in "$@"' loop to preserve "$@" intact while iterating over the
options, and taking extra care to handle the '-r' option's required
argument (or the lack thereof).
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
One of our test scripts, 't1510-repo-setup.sh' [1], still can't be
reliably run with '-x' tracing enabled, unless it's executed with a
Bash version supporting BASH_XTRACEFD (since v4.1). We have a lengthy
condition to check the version of the shell running the test script,
and disable tracing if it's not executed with a suitable Bash version
[2].
Move this check out from the option parsing loop, so other options can
imply '-x' by setting 'trace=t', without missing this Bash version
check.
[1] 5827506928 (t1510-repo-setup: mark as untraceable with '-x',
2018-02-24)
[2] 5fc98e79fc (t: add means to disable '-x' tracing for individual
test scripts, 2018-02-24)
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This reverts commit 314a73d658 (t/lib-git-daemon: record daemon log,
2018-01-25), which let tests use the output of git-daemon.
The previous commit removed the last user of deamon.log in the tests,
there's no good way to make checking for output in the log
race-proof. Revert this commit as well, to make sure others are not
tempted to use daemon.log in tests in the future, which would lead to
racy tests.
The original commit had one change that still makes sense, namely
switching read/echo for "read -r" and "printf", which relays the data
more faithfully. Don't revert that piece here, as it is still a
useful change.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A properly configured username/email is required under
user.useConfigOnly in order to create commits; now "git stash"
(even though it creates commit objects to represent stash entries)
command is exempt from the requirement.
* sd/stash-wo-user-name:
stash: tolerate missing user identity
|
|
Refspecs configured with "git -c var=val clone" did not propagate
to the resulting repository, which has been corrected.
* sg/clone-initial-fetch-configuration:
Documentation/clone: document ignored configuration variables
clone: respect additional configured fetch refspecs during initial fetch
clone: use a more appropriate variable name for the default refspec
|
|
"git checkout frotz" (without any double-dash) avoids ambiguity by
making sure 'frotz' cannot be interpreted as a revision and as a
path at the same time. This safety has been updated to check also
a unique remote-tracking branch 'frotz' in a remote, when dwimming
to create a local branch 'frotz' out of a remote-tracking branch
'frotz' from a remote.
* nd/checkout-dwim-fix:
checkout: disambiguate dwim tracking branches and local files
|
|
"git push $there $src:$dst" rejects when $dst is not a fully
qualified refname and not clear what the end user meant. The
codepath has been taught to give a clearer error message, and also
guess where the push should go by taking the type of the pushed
object into account (e.g. a tag object would want to go under
refs/tags/).
* ab/push-dwim-dst:
push doc: document the DWYM behavior pushing to unqualified <dst>
push: test that <src> doesn't DWYM if <dst> is unqualified
push: add an advice on unqualified <dst> push
push: move unqualified refname error into a function
push: improve the error shown on unqualified <dst> push
i18n: remote.c: mark error(...) messages for translation
remote.c: add braces in anticipation of a follow-up change
|
|
Small fixes and features for fast-export and fast-import, mostly on
the fast-export side.
* en/fast-export-import:
fast-export: add a --show-original-ids option to show original names
fast-import: remove unmaintained duplicate documentation
fast-export: add --reference-excluded-parents option
fast-export: ensure we export requested refs
fast-export: when using paths, avoid corrupt stream with non-existent mark
fast-export: move commit rewriting logic into a function for reuse
fast-export: avoid dying when filtering by paths and old tags exist
fast-export: use value from correct enum
git-fast-export.txt: clarify misleading documentation about rev-list args
git-fast-import.txt: fix documentation for --quiet option
fast-export: convert sha1 to oid
|
|
Updates for corner cases in merge-recursive.
* en/merge-path-collision:
t6036: avoid non-portable "cp -a"
merge-recursive: combine error handling
t6036, t6043: increase code coverage for file collision handling
merge-recursive: improve rename/rename(1to2)/add[/add] handling
merge-recursive: use handle_file_collision for add/add conflicts
merge-recursive: improve handling for rename/rename(2to1) conflicts
merge-recursive: fix rename/add conflict handling
merge-recursive: new function for better colliding conflict resolutions
merge-recursive: increase marker length with depth of recursion
t6036, t6042: testcases for rename collision of already conflicting files
t6042: add tests for consistency in file collision conflict handling
|
|
More _("i18n") markings.
* nd/i18n:
fsck: mark strings for translation
fsck: reduce word legos to help i18n
parse-options.c: mark more strings for translation
parse-options.c: turn some die() to BUG()
parse-options: replace opterror() with optname()
repack: mark more strings for translation
remote.c: mark messages for translation
remote.c: turn some error() or die() to BUG()
reflog: mark strings for translation
read-cache.c: add missing colon separators
read-cache.c: mark more strings for translation
read-cache.c: turn die("internal error") to BUG()
attr.c: mark more string for translation
archive.c: mark more strings for translation
alias.c: mark split_cmdline_strerror() strings for translation
git.c: mark more strings for translation
|
|
Right now if a test script receives SIGTERM or SIGHUP (e.g., because a
test was hanging and the user 'kill'-ed it or simply closed the
terminal window the test was running in), the shell exits immediately.
This can be annoying if the test script did any global setup, like
starting apache or git-daemon, as it will not have an opportunity to
clean up after itself. A subsequent run of the test won't be able to
start its own daemon, and will either fail or skip the tests.
Instead, let's trap SIGTERM and SIGHUP as well to make sure we do a
clean shutdown, and just chain it to a normal exit (which will trigger
any cleanup).
This patch follows suit of da706545f7 (t: translate SIGINT to an exit,
2015-03-13), and even stole its commit message as well.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* sg/test-bash-version-fix:
test-lib: check Bash version for '-x' without using shell arrays
|
|
One of our test scripts, 't1510-repo-setup.sh' [1], still can't be
reliably run with '-x' tracing enabled, unless it's executed with a
Bash version supporting BASH_XTRACEFD (since v4.1). We have a lengthy
condition to check the version of the shell running the test script,
and disable tracing if it's not executed with a suitable Bash version
[2].
This condition uses non-portable shell array accesses to easily get
Bash's major and minor version number. This didn't seem to be
problematic, because the simple commands expanding those array
accesses are only executed when the test script is actually run with
Bash. When run with Dash, the only shell I have at hand that doesn't
support shell arrays, there are no issues, as it apparently skips
right over the non-executed simple commands without noticing the
non-supported constructs.
Alas, it has been reported that NetBSD's /bin/sh does complain about
them:
./test-lib.sh: 327: Syntax error: Bad substitution
where line 327 contains the first ${BASH_VERSINFO[0]} array access.
To my understanding both shells are right and conform to POSIX,
because the standard allows both behaviors by stating the following
under '2.8.1 Consequences of Shell Errors' [3]:
"An expansion error is one that occurs when the shell expansions
define in wordexp are carried out (for example, "${x!y}", because
'!' is not a valid operator); an implementation may treat these as
syntax errors if it is able to detect them during tokenization,
rather than during expansion."
Avoid this issue with NetBSD's /bin/sh (and potentially with other,
less common shells) by hiding the shell array syntax behind 'eval'
that is only executed with Bash.
[1] 5827506928 (t1510-repo-setup: mark as untraceable with '-x',
2018-02-24)
[2] 5fc98e79fc (t: add means to disable '-x' tracing for individual
test scripts, 2018-02-24)
[3] http://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_08_01
Reported-by: Max Kirillov <max@max630.net>
Helped-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Let's say there are files named 'foo bar.txt', and 'abc def/test.txt' in
repository. When following commands trigger a completion:
git show HEAD:fo<Tab>
git show HEAD:ab<Tab>
The completion results in bash/zsh:
git show HEAD:foo bar.txt
git show HEAD:abc def/
Where the both of them have an unescaped space in paths, so they'll be
misread by git. All entries of git ls-tree either a filename or a
directory, so __gitcomp_file() is proper rather than __gitcomp_nl().
Note the commit f12785a3, which handles quoted paths properly. Like this
case, we should dequote $cur_ for ?*:* case. For example, let's say
there is untracked directory 'abc deg', then trigger a completion:
git show HEAD:abc\ de<Tab>
git show HEAD:'abc de<Tab>
git show HEAD:"abc de<Tab>
should uniquely complete 'abc def', but bash completes 'abc def' and
'abc deg' instead. In zsh, triggering a completion:
git show HEAD:abc\ def/<Tab>
should complete 'test.txt', but nothing comes. The both problems will be
resolved by dequoting paths.
__git_complete_revlist_file() passes arguments to __gitcomp_nl() where
the first one is a list something like:
abc def/Z
foo bar.txt Z
where Z is the mark of the EOL.
- The trailing space of blob in __git ls-tree | sed.
It makes the completion results become:
git show HEAD:foo\ bar.txt\ <CURSOR>
So git will try to find a file named 'foo bar.txt ' instead.
- The trailing slash of tree in __git ls-tree | sed.
It makes the completion results on zsh become:
git show HEAD:abc\ def/ <CURSOR>
So that the last space on command like should be removed on zsh to
complete filenames under 'abc def/'.
Signed-off-by: Chayoung You <yousbe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The scripted version of rebase used to run this hook on the initial
checkout. The transition to built-in introduced a regression.
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There is no strong reason to use separate clones to run
these tests; just use a single test repository prepared
with more modern test_commit shell helper function.
While at it, replace three "awk '{print $N}'" on the same
file with shell built-in "read" into three variables.
Revert d42ec126aa717d00549e387d5a95fd55683c2e2c which is a workaround for
Cygwin that is no longer needed.
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the Git pack protocol definition, an error packet may appear only in
a certain context. However, servers can face a runtime error (e.g. I/O
error) at an arbitrary timing. This patch changes the protocol to allow
an error packet to be sent instead of any packet.
Without this protocol spec change, when a server cannot process a
request, there's no way to tell that to a client. Since the server
cannot produce a valid response, it would be forced to cut a connection
without telling why. With this protocol spec change, the server can be
more gentle in this situation. An old client may see these error packets
as an unexpected packet, but this is not worse than having an unexpected
EOF.
Following this protocol spec change, the error packet handling code is
moved to pkt-line.c. Implementation wise, this implementation uses
pkt-line to communicate with a subprocess. Since this is not a part of
Git protocol, it's possible that a packet that is not supposed to be an
error packet is mistakenly parsed as an error packet. This error packet
handling is enabled only for the Git pack protocol parsing code
considering this.
Signed-off-by: Masaya Suzuki <masayasuzuki@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reimplement the `get_terms` and `bisect_terms` shell function in C and
add `bisect-terms` subcommand to `git bisect--helper` to call it from
git-bisect.sh .
Using `--bisect-terms` subcommand is a temporary measure to port shell
function in C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired but its implementation will
be called by some other methods.
Also use error() to report "no terms defined" and accordingly change the
test in t6030.
We need to use PARSE_OPT_KEEP_UNKNOWN here to allow for parameters that
look like options (e.g --term-good) but should not be parsed by
cmd_bisect__helper(). This change is safe because all other cmdmodes have
strict argc checks already.
Mentored-by: Lars Schneider <larsxschneider@gmail.com>
Mentored-by: Christian Couder <chriscool@tuxfamily.org>
Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com>
Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
