1

[EDIT: simplified and corrected]

I would like to use the same method as Raspbian install which relies on dd deployment to a µSD. Meaning, from a minimal image file, deploy the "augmented" Raspbian system partitions with dd on a SD card, resulting into two partitions and their files.

Is there a way to augment (inject files) the image blob file?

(The augmented image file won't fit into RAM)

Improve this question
7
  • I think the easiest way is to install it i a fast SD card, do some tweaks and then clone it to an image file. Otherwise, to create an own operating system (maybe call it re-spin) is a rather big task. You could do it from scratch using an existing system in your computer. There are also some shortcuts, but I have no own experience from doing it in an RPi. Commented Jun 27, 2020 at 19:05
  • thank you @sudodus, I will do the simple way for now. The only optimization I can think of is to use a 8GB µSD, so that the dd won't take very long. Otherwise, I studied 4 scenarios: dd with partitions, ramfs, whole disk 'dd' containing the required partitions, dd extended partition containing required partitions. None can work for several reasons. It is a bit too long to give details. Commented Jun 27, 2020 at 20:25
  • actually, I would like to modify the blob image file, as you can do it for .iso files using a software. You can open the .iso and add/delete files. Would it be also possible with a dd image of the µSD card? Commented Jun 28, 2020 at 7:08
  • If you don't want to work with the system on a real drive (µSD card), you might be able to work with it in a virtual machine with a virtual disk (for example using VirtualBox). I think it is possible to edit an image in a file directly, it the file system is writable, but I have not worked that way, and cannot give any detailed warnings and tips. Commented Jun 28, 2020 at 7:13
  • @sudodus well, that would not be suited for my use case. I'm looking for an industrialized process, using few and swift steps. The process would be: start with a deployed Rasbian on a µSD card >---> dd to Desktop (one image file or partitions) >---> adding files to it on Desktop >---> 'dd' back to a new µSD : fully working augmented Raspbian Commented Jun 28, 2020 at 8:46

2 Answers 2

Reset to default
1

@sudodus helped me find the answer.

How to augment the image? -> mount the image file as loop disk/partitions. Use a mounting point. Add the files. For details: another loop question

How to use dd to write the augmented image to another µSD?

sudo dd bs=4M status=progress of=/dev/sdf if=/dev/loop1 conv=fsync

Improve this answer
0 
# losetup -fP image.img

-f will set it to the first loop device

-P will make a partition table

The device will be called /dev/loop0

Improve this answer
1
  • Welcome to Stackexchange, and thanks for your first answer. However, it is not clear how your suggestion adds anything to the other answer. Commented Mar 9, 2021 at 2:14

You must log in to answer this question.

Start asking to get answers

Find the answer to your question by asking.

Ask question

Explore related questions

See similar questions with these tags.