Merge pull request #1 from arduino/master

pull master

Author: me-no-dev

examples/01.Basics/AnalogReadSerial/AnalogReadSerial.ino

@@ -1,7 +1,7 @@
 /*
   AnalogReadSerial
   Reads an analog input on pin 0, prints the result to the serial monitor.
-  Graphical representation of readings available using serial plotter (Tools > Serial Plotter menu)
+  Graphical representation is available using serial plotter (Tools > Serial Plotter menu)
   Attach the center pin of a potentiometer to pin A0, and the outside pins to +5V and ground.
 
   This example code is in the public domain.

examples/01.Basics/ReadAnalogVoltage/ReadAnalogVoltage.ino

@@ -1,10 +1,11 @@
 /*
   ReadAnalogVoltage
   Reads an analog input on pin 0, converts it to voltage, and prints the result to the serial monitor.
+  Graphical representation is available using serial plotter (Tools > Serial Plotter menu)
   Attach the center pin of a potentiometer to pin A0, and the outside pins to +5V and ground.
 
- This example code is in the public domain.
- */
+  This example code is in the public domain.
+*/
 
 // the setup routine runs once when you press reset:
 void setup() {

examples/04.Communication/ASCIITable/ASCIITable.ino

@@ -23,7 +23,7 @@ void setup() {
   //Initialize serial and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   // prints title with ending line break

examples/04.Communication/SerialCallResponse/SerialCallResponse.ino

@@ -33,7 +33,7 @@ void setup() {
   // start serial port at 9600 bps:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   pinMode(2, INPUT);   // digital sensor is on digital pin 2

examples/04.Communication/SerialCallResponseASCII/SerialCallResponseASCII.ino

@@ -37,7 +37,7 @@ void setup() {
   // start serial port at 9600 bps and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
 

examples/08.Strings/CharacterAnalysis/CharacterAnalysis.ino

@@ -15,7 +15,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   // send an intro:

examples/08.Strings/StringAdditionOperator/StringAdditionOperator.ino

@@ -20,7 +20,7 @@ void setup() {
   // initialize serial and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   stringOne = String("stringThree = ");

examples/08.Strings/StringAppendOperator/StringAppendOperator.ino

@@ -18,7 +18,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   stringOne = String("Sensor ");

examples/08.Strings/StringCaseChanges/StringCaseChanges.ino

@@ -16,7 +16,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   // send an intro:

examples/08.Strings/StringCharacters/StringCharacters.ino

@@ -16,7 +16,7 @@ void setup() {
   // Open serial communications and wait for port to open:
   Serial.begin(9600);
   while (!Serial) {
-    ; // wait for serial port to connect. Needed for Leonardo only
+    ; // wait for serial port to connect. Needed for native USB port only
   }
 
   Serial.println("\n\nString  charAt() and setCharAt():");