Open Source Hardware Datalogger

Advanced flight computer software for high-powered rockets based on the Teensy platform. 4 programmable pyro outputs, Mach immune flight events, air-start & two-stage capable w/ tilt-sensing safety features, GPS & live telemetry. High-rate data logging at 1600 samples per second. Compatible with a wide variety of commercial sensors.

A collection of WhyLogs examples in various languages

ESP32 ESP-IDF Components (I2C, 1-wire, SPI, ADC, etc.) GUVA-S12SD AHTXX AK8975 AS7341 BH1750FVI BME680 BMP280 BMP390 CCS811 ENS160 HDC1080 HMC5883L LTR390UV MMC56X3 MPU6050 SGP4X SHT4X SSD1306 TLV493D VEML7700 DS18B20 MAX31865

A minimal library for binary data logging in ESP8266 systems

Python module to interact with Dewesoft DWDataReaderLib shared library

OLHZN Arduino Mega High Altitude Weather Balloon APRS Radio Tracking & Data Logger

Open Source Internet Of Things Rapid Prototyping Framework For Environmental Sensing Applications

A low cost multi channel data logging system using Python and Arduino UNO board that will log and save data to a CSV (Comma Separated Values) file on the disk.The system can monitor temperature data from 4 independent sources at the same time and log the data to the disk.

A simple Python module for reading Onset HOBO data logger data

GUI interface for custom software-defined instruments

IEEE 802.11n CSI and camera synchronization toolkit.

A visual J1850 VPW analyzer written in Python aimed at 1997-2004 GM Vehicles

This is a comprehensive MATLAB-based software platform developed for real-time measurement and feedback control of a custom mask-projection photopolymerization based additive manufacturing system (referred as "ECPL", i.e., Exposure Controlled Projection Lithography) using a lab-built interferometry (referred as "ICM&M", i.e., Interferometric Cur…

This repository contains all (Python 3) code and libraries required for the 2022-2023 Notre Dame Rocketry Team (NDRT) Apogee Control System (ACS). It also contains sensor/actuator example code and flight data.

Log FLIR A310 IR Data to CSV using Python

Arduino Excel is a powerful interface between Arduino and MS Excel that supports realtime data exchanging in both directions.

BLE sensing-based real-time location system (RTLS) framework.

Serial Port based Python data logger using tkinter (ttkbootstrap) GUI framework. The Python Serial datalogger will acquire data from various sensors connected to the Arduino and save the time stamped data to a comma separated variable text file (CSV file) on the connected PC.