matplotlib-users Mailing List for matplotlib

Daniele,

I agree this is perhaps a little overly complicated. (However, once you
figure it out, it does give you a ton of flexibility.)  I played around
with this a bit (thanks IPython!), and I may have figured out what you
wanted to do. I rewrote the example you linked from the MPL website. I
couldn't simplify it much, but it does change the size, location and labels
of the floating y axis.

#################

from mpl_toolkits.axes_grid1 import host_subplot

import mpl_toolkits.axisartist as AA

import matplotlib.pyplot as plt


host = host_subplot(111, axes_class=AA.Axes)

plt.subplots_adjust(right=0.75)


par1 = host.twinx()


par2 = host.twinx()

offset = 60

new_fixed_axis = par2.get_grid_helper().new_fixed_axis

par2.axis["right"] = new_fixed_axis(loc="right",

axes=par2,

offset=(offset, 0))

par2.axis["right"].toggle(all=True)


p1, = host.plot([0, 1, 2], [0, 1, 2], label="Density")

p2, = par1.plot([0, 1, 2], [0, 3, 2], label="Temperature")

p3, = par2.plot([0, 1, 2], [50, 30, 15], label="Velocity")


host.legend()


host.set_xlabel("Distance")

host.set_ylabel("Density")

host.axis["left"].label.set_color(p1.get_color())

host.set_xlim(0, 2)

host.set_ylim(0, 2)


par1.set_ylabel("Temperature")

par1.axis["right"].label.set_color(p2.get_color())

par1.set_ylim(0, 4)


par2.set_ylabel("Velocity")

par2.set_ylim(1, 65)

par2.yaxis.set_ticks( (20.0, 40.0) )

par2.yaxis.set_ticklabels( ('A', 'B') )

par2.axis["right"].label.set_color(p3.get_color())

par2.axis["right"].label.set_fontsize(18)

par2.axis["right"].major_ticklabels.set_fontsize(14)


plt.show()

##################


Hope that helps.


Ryan


On Tue, Oct 29, 2013 at 5:54 AM, Daniele Nicolodi <da...@gr...>wrote:

> On 29/10/2013 03:11, Ryan Nelson wrote:
> > Daniele,
> >
> > I noticed the same problem with the Qt backend. However, I was looking
> > at the documentation on the AxesGrid webpage here:
> > http://matplotlib.org/mpl_toolkits/axes_grid/users/overview.html
> > And I see the following warning:
> >
> > axes_grid and axisartist (but not axes_grid1) uses a custom Axes class
> > (derived from the mpl’s original Axes class). As a side effect, some
> > commands (mostly tick-related) do not work. Use axes_grid1 to avoid
> > this, or see how things are different in axes_grid and axisartist (LINK
> > needed)
> >
> > Unfortunately, no link. But perhaps there is a way to avoid using the
> > Axes class from axisartist in your use case. For example, could you
> > import the Axes class as follows:
> >
> > from matplotlib.axes import Axes
> >
> > That seems to work with the Qt and PDF backends on Windows 7 (Anaconda
> > Python).
>
> Hello Ryan,
>
> thanks for confirming the problem.  I've also seen that note, but I
> thought "do not work" means that the methods raise an exception, not
> that they arbitrarily ignore arguments :(
>
> While the standard Axis class works for the cut-down example I posted,
> it does not for what I'm trying to achieve (having a second x axis below
> the main one).  I came up with that solution following the matplotlib
> documentation:
>
>
> http://matplotlib.org/mpl_toolkits/axes_grid/users/overview.html#axisartist-with-parasiteaxes
>
> however I don't really understand why some of the contortions there are
> necessary (they are not explained in the documentation).
>
> Cheers,
> Daniele
>
>
>
> ------------------------------------------------------------------------------
> Android is increasing in popularity, but the open development platform that
> developers love is also attractive to malware creators. Download this white
> paper to learn more about secure code signing practices that can help keep
> Android apps secure.
> http://pubads.g.doubleclick.net/gampad/clk?id=65839951&iu=/4140/ostg.clktrk
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>

Thank you very much !


On Tue, Oct 29, 2013 at 3:16 PM, Joe Kington <jof...@gm...> wrote:

> If you're asking how to do it interactively, just click on the zoom button
> again, and you should be able to fire pick events by clicking again.
>
> Hope that helps!
> -Joe
> On Oct 29, 2013 4:58 AM, "Nils Wagner" <ni...@go...> wrote:
>
>> Hi all,
>>
>> How can I use a pick event when I have used "Zoom to rectangle" before ?
>>
>> Nils
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Android is increasing in popularity, but the open development platform
>> that
>> developers love is also attractive to malware creators. Download this
>> white
>> paper to learn more about secure code signing practices that can help keep
>> Android apps secure.
>>
>> http://pubads.g.doubleclick.net/gampad/clk?id=65839951&iu=/4140/ostg.clktrk
>> _______________________________________________
>> Matplotlib-users mailing list
>> Mat...@li...
>> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>>
>>

If you're asking how to do it interactively, just click on the zoom button
again, and you should be able to fire pick events by clicking again.

Hope that helps!
-Joe
On Oct 29, 2013 4:58 AM, "Nils Wagner" <ni...@go...> wrote:

> Hi all,
>
> How can I use a pick event when I have used "Zoom to rectangle" before ?
>
> Nils
>
>
>
> ------------------------------------------------------------------------------
> Android is increasing in popularity, but the open development platform that
> developers love is also attractive to malware creators. Download this white
> paper to learn more about secure code signing practices that can help keep
> Android apps secure.
> http://pubads.g.doubleclick.net/gampad/clk?id=65839951&iu=/4140/ostg.clktrk
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>
>

Hi all,

How can I use a pick event when I have used "Zoom to rectangle" before ?

Nils

On 29/10/2013 03:11, Ryan Nelson wrote:
> Daniele,
> 
> I noticed the same problem with the Qt backend. However, I was looking
> at the documentation on the AxesGrid webpage here:
> http://matplotlib.org/mpl_toolkits/axes_grid/users/overview.html
> And I see the following warning:
> 
> axes_grid and axisartist (but not axes_grid1) uses a custom Axes class
> (derived from the mpl’s original Axes class). As a side effect, some
> commands (mostly tick-related) do not work. Use axes_grid1 to avoid
> this, or see how things are different in axes_grid and axisartist (LINK
> needed)
> 
> Unfortunately, no link. But perhaps there is a way to avoid using the
> Axes class from axisartist in your use case. For example, could you
> import the Axes class as follows:
> 
> from matplotlib.axes import Axes
> 
> That seems to work with the Qt and PDF backends on Windows 7 (Anaconda
> Python).

Hello Ryan,

thanks for confirming the problem.  I've also seen that note, but I
thought "do not work" means that the methods raise an exception, not
that they arbitrarily ignore arguments :(

While the standard Axis class works for the cut-down example I posted,
it does not for what I'm trying to achieve (having a second x axis below
the main one).  I came up with that solution following the matplotlib
documentation:

http://matplotlib.org/mpl_toolkits/axes_grid/users/overview.html#axisartist-with-parasiteaxes

however I don't really understand why some of the contortions there are
necessary (they are not explained in the documentation).

Cheers,
Daniele

Daniele,

I noticed the same problem with the Qt backend. However, I was looking at
the documentation on the AxesGrid webpage here:
http://matplotlib.org/mpl_toolkits/axes_grid/users/overview.html
And I see the following warning:

axes_grid and axisartist (but not axes_grid1) uses a custom Axes class
(derived from the mpl’s original Axes class). As a side effect, some
commands (mostly tick-related) do not work. Use axes_grid1 to avoid this,
or see how things are different in axes_grid and axisartist (LINK needed)

Unfortunately, no link. But perhaps there is a way to avoid using the Axes
class from axisartist in your use case. For example, could you import the
Axes class as follows:

from matplotlib.axes import Axes

That seems to work with the Qt and PDF backends on Windows 7 (Anaconda
Python).

Ryan


On Mon, Oct 28, 2013 at 7:37 PM, Daniele Nicolodi <da...@gr...>wrote:

> On 29/10/2013 00:17, Sterling Smith wrote:
> > While your example tries to be self contained, which is great!, there is
> no difference between these two conditions...
> >
> >> if BUG:
> >>    ax1 = host_subplot(111, axes_class=Axes)
> >> else:
> >>    ax1 = host_subplot(111, axes_class=Axes)
>
> Ops, obvious mistake. It should read:
>
> BUG = True
> if BUG:
>     ax1 = host_subplot(111 , axes_class=Axes)
> else:
>     ax1 = host_subplot(111)
>
>
> Cheers,
> Daniele
>
>
>
> ------------------------------------------------------------------------------
> Android is increasing in popularity, but the open development platform that
> developers love is also attractive to malware creators. Download this white
> paper to learn more about secure code signing practices that can help keep
> Android apps secure.
> http://pubads.g.doubleclick.net/gampad/clk?id=65839951&iu=/4140/ostg.clktrk
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>