| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
"core.commentChar=auto" that attempts to dynamically pick a
suitable comment character is non-workable, as it is too much
trouble to support for little benefit, and is marked as deprecated.
* pw/3.0-commentchar-auto-deprecation:
commit: print advice when core.commentString=auto
config: warn on core.commentString=auto
breaking-changes: deprecate support for core.commentString=auto
|
|
Add some advice on how to change the config settings when
"core.commentString=auto" or "core.commentChar=auto". The advice
includes instructions for clearing the config setting or setting a
fixed comment string. To try and be as specific as possible, the advice
is customized based on the user's config. If "core.commentString=auto"
is set in the system config and the user does not have write
access then the advice omits the instructions to clear the config
and recommends changing the global config instead. An alternative
approach would be to advise the user to run "git config --show-origin"
and leave them to figure out how to fix it themselves but that seems
rather unfriendly. As we're forcing them to update their config we
should try and make that as easy as possible.
In order to generate this advice we need to record each file where
either of the config keys is set and whether a key occurs more that
once in a given file. This lets us generate the list of commands to
remove all the keys and also tells us which key the "auto" setting
comes from.
As we want the user to update their config we do not provide a way
for this advice to be disabled other than changing the value of
"core.commentChar" or "core.commentString".
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As support for this setting was deprecated in the last commit print a
warning (or die when WITH_BREAKING_CHANGES is enabled) if it is set.
Avoid bombarding the user with warnings by only printing it (a) when
running commands that call "git commit" and (b) only once per command.
Some scaffolding is added to repo_read_config() to allow it to
detect deprecated config settings and warn about them. As both
"core.commentChar" and "core.commentString" set the comment
character we record which one of them is used and tailor the
warning message appropriately.
Note the odd combination of die_message() followed by die(NULL)
is to allow the next commit to insert a call to advise() in the middle.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "core.commentString" is set to "auto" then "git commit" will
automatically select the comment character ensuring that it is not the
first character on any of the lines in the commit message. This was
introduced by commit 84c9dc2c5a2 (commit: allow core.commentChar=auto
for character auto selection, 2014-05-17). The motivation seems to be
to avoid commenting out lines from the existing message when amending
a commit that was created with a message from a file.
Unfortunately this feature does not work with:
* commit message templates that contain comments.
* prepare-commit-msg hooks that introduce comments.
* "git commit --cleanup=strip --edit -F <file>" which means that it
is incompatible with
- the "fixup" and "squash" commands of "git rebase -i" as the
comments added by those commands are then treated as part of
the commit message.
- the conflict comments added to the commit message by "git
cherry-pick", "git rebase" etc. as these comments are then
treated as part of the commit message.
It is also ignored by "git notes" when amending a note.
The issues with comments coming from a template, hook or file are a
consequence of the design of this feature and are therefore hard to
fix.
As the costs of this feature outweigh the benefits, deprecate it and
remove it in Git 3.0. If someone comes up with some patches that fix
all the issues in a maintainable way then I'd be happy to see this
change reverted.
The next commits will add a warning and some advice for users on how
they can update their config settings.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During interactive rebase, using 'drop' on a merge commit lead to
an error, which was incorrect.
* js/rebase-i-allow-drop-on-a-merge:
rebase -i: permit 'drop' of a merge commit
|
|
4c063c82e9 (rebase -i: improve error message when picking merge,
2024-05-30) added advice texts for cases when a merge commit is
passed as argument of sequencer command that cannot operate with
a merge commit. However, it forgot about the 'drop' command, so
that in this case the BUG() in the default branch is reached.
Handle 'drop' like 'merge', i.e., permit it without a message.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Every once in a while, users report that editing the commit summaries
in the todo list does not get reflected in the rebase operation,
suggesting that users are (a) only using one-line commit messages, and
(b) not understanding that the commit summaries are merely helpful
comments to help them find the right hashes.
It may be difficult to correct users' poor commit messages, but we can
at least try to make it clearer that the commit summaries are not
directives of some sort by inserting a comment character. Hopefully
that leads to them looking a little further and noticing the hints at
the bottom to use 'reword' or 'edit' directives.
Yes, this change may look funny at first since it hardcodes '#' rather
than using comment_line_str. However:
* comment_line_str exists to allow disambiguation between lines in
a commit message and lines that are instructions to users editing
the commit message. No such disambiguation is needed for these
comments that occur on the same line after existing directives
* the exact "comment" character(s) on regular pick lines used aren't
actually important; I could have used anything, including completely
random variable length text for each line and it'd work because we
ignore everything after 'pick' and the hash.
* The whole point of this change is to signal to users that they
should NOT be editing any part of the line after the hash (and if
they do so, their edits will be ignored), while the whole point of
comment_line_str is to allow highly flexible editing. So making
it more general by using comment_line_str actually feels
counterproductive.
* The character for merge directives absolutely must be '#'; that
has been deeply hardcoded for a long time (see below), and will
break if some other comment character is used instead. In a
desire to have pick and merge directives be similar, I use the
same comment character for both.
* Perhaps merge directives could be fixed to not be inflexible about
the comment character used, if someone feels highly motivated, but
I think that should be done in a separate follow-on patch.
Here are (some of?) the locations where '#' has already been hardcoded
for a long time for merges:
1) In check_label_or_ref_arg():
case TODO_LABEL:
/*
* '#' is not a valid label as the merge command uses it to
* separate merge parents from the commit subject.
*/
2) In do_merge():
/*
* For octopus merges, the arg starts with the list of revisions to be
* merged. The list is optionally followed by '#' and the oneline.
*/
merge_arg_len = oneline_offset = arg_len;
for (p = arg; p - arg < arg_len; p += strspn(p, " \t\n")) {
if (!*p)
break;
if (*p == '#' && (!p[1] || isspace(p[1]))) {
3) In label_oid():
if ((buf->len == the_hash_algo->hexsz &&
!get_oid_hex(label, &dummy)) ||
(buf->len == 1 && *label == '#') ||
hashmap_get_from_hash(&state->labels,
strihash(label), label)) {
/*
* If the label already exists, or if the label is a
* valid full OID, or the label is a '#' (which we use
* as a separator between merge heads and oneline), we
* append a dash and a number to make it unique.
*/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When rebase rewords a commit it picks the commit and then runs "git
commit --amend" to reword it. When the commit is picked the sequencer
tries to reuse existing commits by fast-forwarding if the parents are
unchanged. Rewording an empty commit that has been fast-forwarded fails
because "git commit --amend" is called without "--allow-empty". This
happens because when a commit is fast-forwarded the logic that checks
whether we should pass "--allow-empty" is skipped. Fix this by always
passing "--allow-empty" when rewording a commit. This is safe because we
are amending a commit that has already been picked so if it had become
empty when it was picked we'd have already returned an error.
As "git commit" will happily create empty merge commits without
"--allow-empty" we do not need to pass that flag when rewording merge
commits.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The advice messages now tell the newer 'git config set' command to
set the advice.token configuration variable to squelch a message.
* bf/explicit-config-set-in-advice-messages:
advice: suggest using subcommand "git config set"
|
|
The advice message currently suggests using "git config advice..." to
disable advice messages, but since
00bbdde141 (builtin/config: introduce "set" subcommand, 2024-05-06)
we have the "set" subcommand for config. Since using the subcommand is
more in-line with the modern interface, any advice should be promoting
its usage. Change the disable advice message to use the subcommand
instead. Change all uses of "git config advice" in the tests to use the
subcommand.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the default value for TEST_PASSES_SANITIZE_LEAK is `true` there
is no longer a need to have that variable declared in all of our tests.
Drop it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test update.
* ua/t3404-cleanup:
t3404: replace test with test_line_count()
t3404: avoid losing exit status with focus on `git show` and `git cat-file`
|
|
Various platform compatibility fixes split out of the larger effort
to use Meson as the primary build tool.
* ps/platform-compat-fixes:
t6006: fix prereq handling with `test_format ()`
http: fix build error on FreeBSD
builtin/credential-cache: fix missing parameter for stub function
t7300: work around platform-specific behaviour with long paths on MinGW
t5500, t5601: skip tests which exercise paths with '[::1]' on Cygwin
t3404: work around platform-specific behaviour on macOS 10.15
t1401: make invocation of tar(1) work with Win32-provided one
t/lib-gpg: fix setup of GNUPGHOME in MinGW
t/lib-gitweb: test against the build version of gitweb
t/test-lib: wire up NO_ICONV prerequisite
t/test-lib: fix quoting of TEST_RESULTS_SAN_FILE
|
|
Two of our tests in t3404 use indented HERE docs where leading tabs on
some of the lines are actually relevant. The tabs do get removed though,
and we try to fix this up by using sed(1) to replace leading tabs in the
actual output, as well. But macOS 10.15 uses an oldish version of sed(1)
that has BSD lineage, which does not understand "\t", and thus we fail
to strip those leading tabs and fail the test.
Address this issue by using `q_to_tab` such that we do not have to strip
leading tabs from the actual output.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Refactor t3404 to replace instances of `test` with `test_line_count()`
for checking line counts. This improves readability and aligns with Git's
current test practices.
Signed-off-by: Usman Akinyemi <usmanakinyemi202@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
The exit code of the preceding command in a pipe is disregarded. So
if that preceding command is a Git command that fails, the test would
not fail. Instead, by saving the output of that Git command to a file,
and removing the pipe, we make sure the test will fail if that Git
command fails. This particular patch focuses on all `git show` and
some instances of `git cat-file`.
Signed-off-by: Usman Akinyemi <usmanakinyemi202@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
When interactively rebasing merge commits, the commit message is parsed to
extract a probably meaningful label name. For instance if the merge commit
is “Merge branch 'feature0'”, then the rebase script will have thes lines:
```
label feature0
merge -C $sha feature0 # “Merge branch 'feature0'
```
This heuristic fails in the case of octopus merges or when the merge commit
message is actually unrelated to the parent commits.
An example that combines both is:
```
*---. 967bfa4 (HEAD -> integration) Integration
|\ \ \
| | | * 2135be1 (feature2, feat2) Feature 2
| |_|/
|/| |
| | * c88b01a Feature 1
| |/
|/|
| * 75f3139 (feat0) Feature 0
|/
* 25c86d0 (main) Initial commit
```
yields the labels Integration, Integration-2 and Integration-3.
Fix this by using a branch name for each merge commit's parent that is the
tip of at least one branch, and falling back to a label derived from the
merge commit message otherwise.
In the example above, the labels become feat0, Integration and feature2.
Signed-off-by: Nicolas Guichard <nicolas@guichard.eu>
Acked-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In `get_replay_opts()`, we override the `gpg_sign` field that already
got populated by `sequencer_init_config()` in case the user has
"commit.gpgsign" set in their config. This creates a memory leak because
we overwrite the previously assigned value, which may have already
pointed to an allocated string.
Let's plug the memory leak by freeing the value before we overwrite it.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The only todo commands that accept a merge commit are "merge" and
"reset". All the other commands like "pick" or "reword" fail when they
try to pick a a merge commit and print the message
error: commit abc123 is a merge but no -m option was given.
followed by a hint about the command being rescheduled. This message is
designed to help the user when they cherry-pick a merge and forget to
pass "-m". For users who are rebasing the message is confusing as there
is no way for rebase to cherry-pick the merge.
Improve the user experience by detecting the error and printing some
advice on how to fix it when the todo list is parsed rather than waiting
for the "pick" command to fail. The advice recommends "merge" rather
than "exec git cherry-pick -m ..." on the assumption that cherry-picking
merges is relatively rare and it is more likely that the user chose
"pick" by a mistake.
It would be possible to support cherry-picking merges by allowing the
user to pass "-m" to "pick" commands but that adds complexity to do
something that can already be achieved with
exec git cherry-pick -m1 abc123
Reported-by: Stefan Haller <lists@haller-berlin.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git cherry-pick" invoked during "git rebase -i" session lost
the authorship information, which has been corrected.
* vn/rebase-with-cherry-pick-authorship:
sequencer: unset GIT_CHERRY_PICK_HELP for 'exec' commands
|
|
Running "git cherry-pick" as an x-command in the rebase plan loses
the original authorship information.
To fix this, unset GIT_CHERRY_PICK_HELP for 'exec' commands.
Helped-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Update ref-related tests.
* ps/ref-tests-update:
t: mark several tests that assume the files backend with REFFILES
t7900: assert the absence of refs via git-for-each-ref(1)
t7300: assert exact states of repo
t4207: delete replace references via git-update-ref(1)
t1450: convert tests to remove worktrees via git-worktree(1)
t: convert tests to not access reflog via the filesystem
t: convert tests to not access symrefs via the filesystem
t: convert tests to not write references via the filesystem
t: allow skipping expected object ID in `ref-store update-ref`
|
|
Another step to deprecate test_i18ngrep.
* jc/test-i18ngrep:
tests: teach callers of test_i18ngrep to use test_grep
test framework: further deprecate test_i18ngrep
|
|
Some of our tests manually create, update or delete references by
writing the respective new values into the filesystem directly. While
this works with the current files reference backend, this will break
once we have a second reference backend implementation in our codebase.
Refactor these tests to instead use git-update-ref(1) or our `ref-store`
test tool. The latter is required in some cases where safety checks of
git-update-ref(1) would otherwise reject a reference update.
While at it, refactor some of the tests to schedule the cleanup command
via `test_when_finished` before modifying the repository.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
They are equivalents and the former still exists, so as long as the
only change this commit makes are to rewrite test_i18ngrep to
test_grep, there won't be any new bug, even if there still are
callers of test_i18ngrep remaining in the tree, or when merged to
other topics that add new uses of test_i18ngrep.
This patch was produced more or less with
git grep -l -e 'test_i18ngrep ' 't/t[0-9][0-9][0-9][0-9]-*.sh' |
xargs perl -p -i -e 's/test_i18ngrep /test_grep /'
and a good way to sanity check the result yourself is to run the
above in a checkout of c4603c1c (test framework: further deprecate
test_i18ngrep, 2023-10-31) and compare the resulting working tree
contents with the result of applying this patch to the same commit.
You'll see that test_i18ngrep in a few t/lib-*.sh files corrected,
in addition to the manual reproduction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* ob/t3404-typofix:
t3404-rebase-interactive.sh: fix typos in title of a rewording test
|
|
Various fixes to the behaviour of "rebase -i" when the command got
interrupted by conflicting changes.
* pw/rebase-i-after-failure:
rebase -i: fix adding failed command to the todo list
rebase --continue: refuse to commit after failed command
rebase: fix rewritten list for failed pick
sequencer: factor out part of pick_commits()
sequencer: use rebase_path_message()
rebase -i: remove patch file after conflict resolution
rebase -i: move unlink() calls
|
|
This test was introduced by commit 0c164ae7a ("rebase -i: add another
reword test", 2021-08-20). I didn't quite get what it was meant to do,
so here's an explanation from Phillip:
The purpose of the test is to ensure that
(i) There are no uncommitted changes when the editor runs. i.e., we
commit without running the editor and then reword by amending
that commit. This ensures that we have the same user experience
whether or not the commit was fast-forwarded [1].
(ii) That the todo list is re-read after the commit has been reworded.
This is to allow the user to update the todo list while the rebase
is paused for editing the commit message.
[1] https://lore.kernel.org/git/20190812175046.GM20404@szeder.dev/
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When rebasing commands are moved from the todo list in "git-rebase-todo"
to the "done" file (which is used by "git status" to show the recently
executed commands) just before they are executed. This means that if a
command fails because it would overwrite an untracked file it has to be
added back into the todo list before the rebase stops for the user to
fix the problem.
Unfortunately when a failed command is added back into the todo list the
command preceding it is erroneously appended to the "done" file. This
means that when rebase stops after "pick B" fails the "done" file
contains
pick A
pick B
pick A
instead of
pick A
pick B
This happens because save_todo() updates the "done" file with the
previous command whenever "git-rebase-todo" is updated. When we add the
failed pick back into "git-rebase-todo" we do not want to update
"done". Fix this by adding a "reschedule" parameter to save_todo() which
prevents the "done" file from being updated when adding a failed command
back into the "git-rebase-todo" file. A couple of the existing tests are
modified to improve their coverage as none of them trigger this bug or
check the "done" file.
Reported-by: Stefan Haller <lists@haller-berlin.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If a commit cannot be picked because it would overwrite an untracked
file then "git rebase --continue" should refuse to commit any staged
changes as the commit was not picked. This is implemented by refusing to
commit if the message file is missing. The message file is chosen for
this check because it is only written when "git rebase" stops for the
user to resolve merge conflicts.
Existing commands that refuse to commit staged changes when continuing
such as a failed "exec" rely on checking for the absence of the author
script in run_git_commit(). This prevents the staged changes from being
committed but prints
error: could not open '.git/rebase-merge/author-script' for
reading
before the message about not being able to commit. This is confusing to
users and so checking for the message file instead improves the user
experience. The existing test for refusing to commit after a failed exec
is updated to check that we do not print the error message about a
missing author script anymore.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git rebase keeps a list that maps the OID of each commit before it was
rebased to the OID of the equivalent commit after the rebase. This list
is used to drive the "post-rewrite" hook that is called at the end of a
successful rebase. When a rebase stops for the user to resolve merge
conflicts the OID of the commit being picked is written to
".git/rebase-merge/stopped-sha". Then when the rebase is continued that
OID is added to the list of rewritten commits. Unfortunately if a commit
cannot be picked because it would overwrite an untracked file we still
write the "stopped-sha1" file. This means that when the rebase is
continued the commit is added into the list of rewritten commits even
though it has not been picked yet.
Fix this by not calling error_with_patch() for failed commands. The pick
has failed so there is nothing to commit and therefore we do not want to
set up the state files for committing staged changes when the rebase
continues. This change means we no-longer write a patch for the failed
command or display the error message printed by error_with_patch(). As
the command has failed the patch isn't really useful and in any case the
user can inspect the commit associated with the failed command by
inspecting REBASE_HEAD. Unless the user has disabled it we already print
an advice message that is more helpful than the message from
error_with_patch() which the user will still see. Even if the advice is
disabled the user will see the messages from the merge machinery
detailing the problem.
The code to add a failed command back into the todo list is duplicated
between pick_one_commit() and the loop in pick_commits(). Both sites
print advice about the command being rescheduled, decrement the current
item and save the todo list. To avoid duplicating this code
pick_one_commit() is modified to set a flag to indicate that the command
should be rescheduled in the main loop. This simplifies things as only
the remaining copy of the code needs to be modified to set REBASE_HEAD
rather than calling error_with_patch().
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before the todo list is edited it is rewritten to shorten the OIDs of
the commits being picked and to append advice about editing the list.
The exact advice depends on whether the todo list is being edited for
the first time or not. After the todo list has been edited it is
rewritten to lengthen the OIDs of the commits being picked and to remove
the advice. If the edited list cannot be parsed then this last step is
skipped.
Prior to db81e50724 (rebase-interactive: use todo_list_write_to_file()
in edit_todo_list(), 2019-03-05) if the existing todo list could not be
parsed then the initial rewrite was skipped as well. This had the
unfortunate consequence that if the list could not be parsed after the
initial edit the advice given to the user was wrong when they re-edited
the list. This change relied on todo_list_parse_insn_buffer() returning
the whole todo list even when it cannot be parsed. Unfortunately if the
list starts with a "fixup" command then it will be truncated and the
remaining lines are lost. Fix this by continuing to parse after an
initial "fixup" commit as we do when we see any other invalid line.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
[jc: removed an apparently unneeded subshell around the test body]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fixes to code that parses the todo file used in "rebase -i".
* pw/rebase-i-parse-fix:
rebase -i: fix parsing of "fixup -C<commit>"
rebase -i: match whole word in is_command()
|
|
When matching an unabbreviated command is_command() only does a prefix
match which means it parses "pickled" as TODO_PICK. parse_insn_line()
does error out because is_command() only advances as far as the end of
"pick" so it looks like the command name is not followed by a space but
the error message is "missing arguments for pick" rather than telling
the user that the "pickled" is not a valid command.
Fix this by ensuring the match is follow by whitespace or the end of the
string as we already do for abbreviated commands. The (*bol = p) at the
end of the condition is a bit cute for my taste but I decided to leave
it be for now. Rather than add new tests the existing tests for bad
commands are adapted to use a bad command name that triggers the prefix
matching bug.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check that the argument to the "label" and "update-ref" commands is a
valid refname when the todo list is parsed rather than waiting until the
command is executed. This means that the user can deal with any errors
at the beginning of the rebase rather than having it stop halfway
through due to a typo in a label name. The "update-ref" command is
changed to reject single level refs as it is all to easy to type
"update-ref branch" which is incorrect rather than "update-ref
refs/heads/branch"
Note that it is not straight forward to check the arguments to "reset"
and "merge" commands as they may be any revision, not just a refname and
we do not have an equivalent of check_refname_format() for revisions.
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Acked-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In b3b1a21d1a5 (sequencer: rewrite update-refs as user edits todo list,
2022-07-19), the 'todo_list_filter_update_refs()' step was added to handle
the removal of 'update-ref' lines from a 'rebase-todo'. Specifically, it
removes potential ref updates from the "update refs state" if a ref does not
have a corresponding 'update-ref' line.
However, because 'write_update_refs_state()' will not update the state if
the 'refs_to_oids' list was empty, removing *all* 'update-ref' lines will
result in the state remaining unchanged from how it was initialized (with
all refs' "after" OID being null). Then, when the ref update is applied, all
refs will be updated to null and consequently deleted.
To fix this, delete the 'update-refs' state file when 'refs_to_oids' is
empty. Additionally, add a tests covering "all update-ref lines removed"
cases.
Reported-by: herr.kaste <herr.kaste@gmail.com>
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Helped-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
The CodingGuidelines says we should avoid \{m,n\} in BRE usage.
And their usages in our code base is limited, and subjectively
hard to read.
Replace them with ERE.
Except for "0\{40\}" which would be changed to "$ZERO_OID",
which is a better value for testing with:
GIT_TEST_DEFAULT_HASH=sha256
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the user runs 'git rebase -i --update-refs', the end message still
says only
Successfully rebased and updated <HEAD-ref>.
Update the sequencer to collect the successful (and unsuccessful) ref
updates due to the --update-refs option, so the end message now says
Successfully rebased and updated <HEAD-ref>.
Updated the following refs with --update-refs:
refs/heads/first
refs/heads/third
Failed to update the following refs with --update-refs:
refs/heads/second
To test this output, we need to be very careful to format the expected
error to drop the leading tab characters. Also, we need to be aware that
the verbose output from 'git rebase' is writing progress lines which
don't use traditional newlines but clear the line after every progress
item is complete. When opening the error file in an editor, these lines
are visible, but when looking at the diff in a terminal those lines
disappear because of the characters that delete the previous characters.
Use 'sed' to clear those progress lines and clear the tabs so we can get
an exact match on our expected output.
Reported-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous change added the --update-refs command-line option. For
users who always want this mode, create the rebase.updateRefs config
option which behaves the same way as rebase.autoSquash does with the
--autosquash option.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
An interactive rebase provides opportunities for the user to edit the
todo list. The --update-refs option initializes the list with some
'update-ref <ref>' steps, but the user could add these manually.
Further, the user could add or remove these steps during pauses in the
interactive rebase.
Add a new method, todo_list_filter_update_refs(), that scans a todo_list
and compares it to the stored update-refs file. There are two actions
that can happen at this point:
1. If a '<ref>/<before>/<after>' triple in the update-refs file does not
have a matching 'update-ref <ref>' command in the todo-list _and_ the
<after> value is the null OID, then remove that triple. Here, the
user removed the 'update-ref <ref>' command before it was executed,
since if it was executed then the <after> value would store the
commit at that position.
2. If a 'update-ref <ref>' command in the todo-list does not have a
matching '<ref>/<before>/<after>' triple in the update-refs file,
then insert a new one. Store the <before> value to be the current
OID pointed at by <ref>. This is handled inside of the
init_update_ref_record() helper method.
We can test that this works by rewriting the todo-list several times in
the course of a rebase. Check that each ref is locked or unlocked for
updates after each todo-list update. We can also verify that the ref
update fails if a concurrent process updates one of the refs after the
rebase process records the "locked" ref location.
To help these tests, add a new 'set_replace_editor' helper that will
replace the todo-list with an exact file.
Reported-by: Phillip Wood <phillip.wood123@gmail.com>
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The previous change introduced the 'git rebase --update-refs' option
which added 'update-ref <ref>' commands to the todo list of an
interactive rebase.
Teach Git to record the HEAD position when reaching these 'update-ref'
commands. The ref/before/after triple is stored in the
$GIT_DIR/rebase-merge/update-refs file. A previous change parsed this
file to avoid having other processes updating the refs in that file
while the rebase is in progress.
Not only do we update the file when the sequencer reaches these
'update-ref' commands, we then update the refs themselves at the end of
the rebase sequence. If the rebase is aborted before this final step,
then the refs are not updated. The 'before' value is used to ensure that
we do not accidentally obliterate a ref that was updated concurrently
(say, by an older version of Git or a third-party tool).
Now that the 'git rebase --update-refs' command is implemented to write
to the update-refs file, we can remove the fake construction of the
update-refs file from a test in t2407-worktree-heads.sh.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When working on a large feature, it can be helpful to break that feature
into multiple smaller parts that become reviewed in sequence. During
development or during review, a change to one part of the feature could
affect multiple of these parts. An interactive rebase can help adjust
the multi-part "story" of the branch.
However, if there are branches tracking the different parts of the
feature, then rebasing the entire list of commits can create commits not
reachable from those "sub branches". It can take a manual step to update
those branches.
Add a new --update-refs option to 'git rebase -i' that adds 'update-ref
<ref>' steps to the todo file whenever a commit that is being rebased is
decorated with that <ref>. At the very end, the rebase process updates
all of the listed refs to the values stored during the rebase operation.
Be sure to iterate after any squashing or fixups are placed. Update the
branch only after those squashes and fixups are complete. This allows a
--fixup commit at the tip of the feature to apply correctly to the sub
branch, even if it is fixing up the most-recent commit in that part.
This change update the documentation and builtin to accept the
--update-refs option as well as updating the todo file with the
'update-ref' commands. Tests are added to ensure that these todo
commands are added in the correct locations.
This change does _not_ include the actual behavior of tracking the
updated refs and writing the new ref values at the end of the rebase
process. That is deferred to a later change.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change tests that used a "mkdir -p .git/hooks && write_script" pattern
to use the new "test_hook" helper instead. The new helper does not
create the .git/hooks directory, rather we assume that the default
template will do so for us.
An upcoming series[1] will extend "test_hook" to operate in a
"--template=" mode, but for now assuming that we have a .git/hooks
already is a safe assumption. If that assumption becomes false in the
future we'll only need to change 'test_hook", instead of all of these
callsites.
1. https://lore.kernel.org/git/cover-00.13-00000000000-20211212T201308Z-avarab@gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Broken &&-chains in the test scripts have been corrected.
* es/test-chain-lint:
t6000-t9999: detect and signal failure within loop
t5000-t5999: detect and signal failure within loop
t4000-t4999: detect and signal failure within loop
t0000-t3999: detect and signal failure within loop
tests: simplify by dropping unnecessary `for` loops
tests: apply modern idiom for exiting loop upon failure
tests: apply modern idiom for signaling test failure
tests: fix broken &&-chains in `{...}` groups
tests: fix broken &&-chains in `$(...)` command substitutions
tests: fix broken &&-chains in compound statements
tests: use test_write_lines() to generate line-oriented output
tests: simplify construction of large blocks of text
t9107: use shell parameter expansion to avoid breaking &&-chain
t6300: make `%(raw:size) --shell` test more robust
t5516: drop unnecessary subshell and command invocation
t4202: clarify intent by creating expected content less cleverly
t1020: avoid aborting entire test script when one test fails
t1010: fix unnoticed failure on Windows
t/lib-pager: use sane_unset() to avoid breaking &&-chain
|
|
Failures within `for` and `while` loops can go unnoticed if not detected
and signaled manually since the loop itself does not abort when a
contained command fails, nor will a failure necessarily be detected when
the loop finishes since the loop returns the exit code of the last
command it ran on the final iteration, which may not be the command
which failed. Therefore, detect and signal failures manually within
loops using the idiom `|| return 1` (or `|| exit 1` within subshells).
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A couple of test scripts have actually been adapted to accommodate for a
configurable default branch name, but they still overrode it via the
`GIT_TEST_*` variable. Let's drop that override where possible.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "--preserve-merges" option of "git rebase" has been removed.
* js/retire-preserve-merges:
sequencer: restrict scope of a formerly public function
rebase: remove a no-longer-used function
rebase: stop mentioning the -p option in comments
rebase: remove obsolete code comment
rebase: drop the internal `rebase--interactive` command
git-svn: drop support for `--preserve-merges`
rebase: drop support for `--preserve-merges`
pull: remove support for `--rebase=preserve`
tests: stop testing `git rebase --preserve-merges`
remote: warn about unhandled branch.<name>.rebase values
t5520: do not use `pull.rebase=preserve`
|
|
Remove untracked files that are unwanted after they are done being used.
While the set of cases in this patch is certainly far from
comprehensive, it was motivated by some work to see what the fallout
would be if we were to make the removal of untracked files as a side
effect of other commands into an error. Some cases were a bit more
involved than the testcase changes included in this patch, but the ones
included here represent the simple cases. While this patch is not that
important since we are not changing the behavior of those other commands
into an error in the near term, I thought these changes were useful
anyway as an explicit documentation of the intent that these untracked
files are no longer useful.
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This backend has been deprecated in favor of `git rebase
--rebase-merges`.
In preparation for dropping it, let's remove all the regression tests
that would need it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
None of the existing reword tests check that there are no uncommitted
changes when the editor is opened. Reuse the editor script from the
last commit to fix this omission.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Removal of GIT_TEST_GETTEXT_POISON continues.
* ab/detox-gettext-tests:
tests: remove most uses of test_i18ncmp
tests: remove last uses of C_LOCALE_OUTPUT
tests: remove most uses of C_LOCALE_OUTPUT
tests: remove last uses of GIT_TEST_GETTEXT_POISON=false
|
|
Remove the optional "diagnostics" parameter of the
test_path_is_{file,dir,missing} functions.
We have a lot of uses of these functions, but the only legitimate use
of the diagnostics parameter is from when the functions themselves
were introduced in 2caf20c52b7 (test-lib: user-friendly alternatives
to test [-d|-f|-e], 2010-08-10).
But as the the rest of this diff demonstrates its presence did more to
silently introduce bugs in our tests. Fix such bugs in the tests added
in ae4e89e549b (gc: add --keep-largest-pack option, 2018-04-15), and
c04ba51739a (t6046: testcases checking whether updates can be skipped
in a merge, 2018-04-19).
Let's also assert that those functions are called with exactly one
parameter, a follow-up commit will add similar asserts to other
functions in test-lib-functions.sh that we didn't have existing misuse
of.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As a follow-up to d162b25f956 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp
via a simple s/test_i18ncmp/test_cmp/g search-replacement.
I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight
changes between "master" and "seen", as well as the prerequisite
itself due to other changes between "master" and "next/seen" which add
new test_i18ncmp uses.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As a follow-up to d162b25f956 (tests: remove support for
GIT_TEST_GETTEXT_POISON, 2021-01-20) remove those uses of the now
always true C_LOCALE_OUTPUT prerequisite from those tests which
declare it as an argument to test_expect_{success,failure}.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Prepare tests not to be affected by the name of the default branch
"git init" creates.
* js/default-branch-name-tests-final-stretch: (28 commits)
tests: drop prereq `PREPARE_FOR_MAIN_BRANCH` where no longer needed
t99*: adjust the references to the default branch name "main"
tests(git-p4): transition to the default branch name `main`
t9[5-7]*: adjust the references to the default branch name "main"
t9[0-4]*: adjust the references to the default branch name "main"
t8*: adjust the references to the default branch name "main"
t7[5-9]*: adjust the references to the default branch name "main"
t7[0-4]*: adjust the references to the default branch name "main"
t6[4-9]*: adjust the references to the default branch name "main"
t64*: preemptively adjust alignment to prepare for `master` -> `main`
t6[0-3]*: adjust the references to the default branch name "main"
t5[6-9]*: adjust the references to the default branch name "main"
t55[4-9]*: adjust the references to the default branch name "main"
t55[23]*: adjust the references to the default branch name "main"
t551*: adjust the references to the default branch name "main"
t550*: adjust the references to the default branch name "main"
t5503: prepare aligned comment for replacing `master` with `main`
t5[0-4]*: adjust the references to the default branch name "main"
t5323: prepare centered comment for `master` -> `main`
t4*: adjust the references to the default branch name "main"
...
|
|
Now that we can override the default branch name in the tests via
`GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME`, we should avoid expecting a
particular hard-coded name.
So let's rename the initial branch immediately to `primary` and work
with that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
After rebasing, ORIG_HEAD is supposed to point to the old HEAD of the
rebased branch. The code used find_unique_abbrev() to obtain the
object name of the old HEAD and wrote to both
.git/rebase-merge/orig-head (used by `rebase --abort` to go back to
the previous state) and to ORIG_HEAD. The buffer find_unique_abbrev()
gives back is volatile, unfortunately, and was overwritten after the
former file is written but before ORIG_FILE is written, leaving an
incorrect object name in it.
Avoid relying on the volatile buffer of find_unique_abbrev(), and
instead supply our own buffer to keep the object name.
I think that all of the users of head_hash should actually be using
opts->orig_head instead as passing a string rather than a struct
object_id around is a hang over from the scripted implementation. This
patch just fixes the immediate bug and adds a regression test based on
Caspar's reproduction example[1]. The users will be converted to use
struct object_id and head_hash removed in the next few commits.
[1] https://lore.kernel.org/git/CAFzd1+7PDg2PZgKw7U0kdepdYuoML9wSN4kofmB_-8NHrbbrHg@mail.gmail.com
Reported-by: Caspar Duregger <herr.kaste@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ring buffer with size 4 used for bin-hex translation resulted in a
wrong object name in the sequencer's todo output, which has been
corrected.
* ak/sequencer-fix-find-uniq-abbrev:
rebase -i: fix possibly wrong onto hash in todo
|
|
The commit labels used to explain each side of conflicted hunks
placed by the sequencer machinery have been made more readable by
humans.
* en/sequencer-merge-labels:
sequencer: avoid garbled merge machinery messages due to commit labels
|
|
sequencer's get_message() exists to provide good labels on conflict
hunks; see commits
d68565402a ("revert: clarify label on conflict hunks", 2010-03-20)
bf975d379d ("cherry-pick, revert: add a label for ancestor", 2010-03-20)
043a4492b3 ("sequencer: factor code out of revert builtin", 2012-01-11).
for background on this function. These labels are of the form
<commitID>... <commit summary>
or
parent of <commitID>... <commit summary>
These labels are then passed as branch names to the merge machinery.
However, these labels, as formatted, often also serve to confuse. For
example, if we have a rename involved in a content merge, then it
results in text such as the following:
<<<<<<<< HEAD:foo.c
int j;
========
int counter;
>>>>>>>> b01dface... Removed unnecessary stuff:bar.c
Or in various conflict messages, it can make it very difficult to read:
CONFLICT (rename/delete): foo.c deleted in b01dface... Removed
unnecessary stuff and renamed in HEAD. Version HEAD of foo.c left
in tree.
CONFLICT (file location): dir1/foo.c added in b01dface... Removed
unnecessary stuff inside a directory that was renamed in HEAD,
suggesting it should perhaps be moved to dir2/foo.c.
Make a minor change to remove the ellipses and add parentheses around
the commit summary; this makes all three examples much easier to read:
<<<<<<<< HEAD:foo.c
int j;
========
int counter;
>>>>>>>> b01dface (Removed unnecessary stuff):bar.c
CONFLICT (rename/delete): foo.c deleted in b01dface (Removed
unnecessary stuff) and renamed in HEAD. Version HEAD of foo.c left
in tree.
CONFLICT (file location): dir1/foo.c added in b01dface (Removed
unnecessary stuff) inside a directory that was renamed in HEAD,
suggesting it should perhaps be moved to dir2/foo.c.
Signed-off-by: Elijah Newren <newren@gmail.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
'todo_list_write_to_file' may overwrite the static buffer, originating
from 'find_unique_abbrev', that was used to store the short commit hash
'c' for "# Rebase a..b onto c" message in the todo editor. This is
because the buffer that is returned from 'find_unique_abbrev' is valid
until 4 more calls to `find_unique_abbrev` are made.
As 'todo_list_write_to_file' calls 'find_unique_abbrev' for each rebased
commit, the hash for 'c' is overwritten if there are 4 or more commits
in the rebase. This behavior has been broken since its introduction.
Fix by storing the short onto commit hash in a different buffer that
remains valid, before calling 'todo_list_write_to_file'.
Found-by: Jussi Keränen <jussike@gmail.com>
Signed-off-by: Antti Keränen <detegr@rbx.email>
Acked-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The idea of the magic value "ac4f2ee" in this test is to make the
reworded commit `collide2` have the same shortened ID as the commit
`collide3`.
To port the same idea to the SHA-256 version of Git, we therefore need
another magic value that causes the same collision, but this time with
the SHA-256 version of the commit IDs.
In this patch, we add code guarded by `GIT_TEST_FIND_COLLIDER` to do
exactly that. Essentially, a large number of integers is appended to the
commit message "collide2" to find such a collision. To make it easier to
find such a collision, we reduce the number of digits to 4.
As the tests are no longer dependent on SHA-1, we also rename their
titles to talk about "commit IDs" instead of "SHA-1s".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Reviewed-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The mechanism to prevent "git commit" from making an empty commit
or amending during an interrupted cherry-pick was broken during the
rewrite of "git rebase" in C, which has been corrected.
* pw/advise-rebase-skip:
commit: give correct advice for empty commit during a rebase
commit: encapsulate determine_whence() for sequencer
commit: use enum value for multiple cherry-picks
sequencer: write CHERRY_PICK_HEAD for reword and edit
cherry-pick: check commit error messages
cherry-pick: add test for `--skip` advice in `git commit`
t3404: use test_cmp_rev
|
|
"git rebase" has learned to use the merge backend (i.e. the
machinery that drives "rebase -i") by default, while allowing
"--apply" option to use the "apply" backend (e.g. the moral
equivalent of "format-patch piped to am"). The rebase.backend
configuration variable can be set to customize.
* en/rebase-backend:
rebase: rename the two primary rebase backends
rebase: change the default backend from "am" to "merge"
rebase: make the backend configurable via config setting
rebase tests: repeat some tests using the merge backend instead of am
rebase tests: mark tests specific to the am-backend with --am
rebase: drop '-i' from the reflog for interactive-based rebases
git-prompt: change the prompt for interactive-based rebases
rebase: add an --am option
rebase: move incompatibility checks between backend options a bit earlier
git-rebase.txt: add more details about behavioral differences of backends
rebase: allow more types of rebases to fast-forward
t3432: make these tests work with either am or merge backends
rebase: fix handling of restrict_revision
rebase: make sure to pass along the quiet flag to the sequencer
rebase, sequencer: remove the broken GIT_QUIET handling
t3406: simplify an already simple test
rebase (interactive-backend): fix handling of commits that become empty
rebase (interactive-backend): make --keep-empty the default
t3404: directly test the behavior of interest
git-rebase.txt: update description of --allow-empty-message
|
|
Two related changes, with separate rationale for each:
Rename the 'interactive' backend to 'merge' because:
* 'interactive' as a name caused confusion; this backend has been used
for many kinds of non-interactive rebases, and will probably be used
in the future for more non-interactive rebases than interactive ones
given that we are making it the default.
* 'interactive' is not the underlying strategy; merging is.
* the directory where state is stored is not called
.git/rebase-interactive but .git/rebase-merge.
Rename the 'am' backend to 'apply' because:
* Few users are familiar with git-am as a reference point.
* Related to the above, the name 'am' makes sentences in the
documentation harder for users to read and comprehend (they may read
it as the verb from "I am"); avoiding this difficult places a large
burden on anyone writing documentation about this backend to be very
careful with quoting and sentence structure and often forces
annoying redundancy to try to avoid such problems.
* Users stumble over pronunciation ("am" as in "I am a person not a
backend" or "am" as in "the first and thirteenth letters in the
alphabet in order are "A-M"); this may drive confusion when one user
tries to explain to another what they are doing.
* While "am" is the tool driving this backend, the tool driving git-am
is git-apply, and since we are driving towards lower-level tools
for the naming of the merge backend we may as well do so here too.
* The directory where state is stored has never been called
.git/rebase-am, it was always called .git/rebase-apply.
For all the reasons listed above:
* Modify the documentation to refer to the backends with the new names
* Provide a brief note in the documentation connecting the new names
to the old names in case users run across the old names anywhere
(e.g. in old release notes or older versions of the documentation)
* Change the (new) --am command line flag to --apply
* Rename some enums, variables, and functions to reinforce the new
backend names for us as well.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have many rebase tests in the testsuite, and often the same test is
repeated multiple times just testing different backends. For those
tests that were specifically trying to test the am backend, add the --am
flag.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A large variety of rebase types are supported by the interactive
machinery, not just the explicitly interactive ones. These all share
the same code and write the same reflog messages, but the "-i" moniker
in those messages doesn't really have much meaning. It also becomes
somewhat distracting once we switch the default from the am-backend to
the interactive one. Just remove the "-i" from these messages.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When set to "warn" or "error", `rebase.missingCommitsCheck' would make
`rebase -i' warn if the user removed commits from the todo list to
prevent mistakes. Unfortunately, `rebase --edit-todo' and `rebase
--continue' don't take it into account.
This adds the ability for `rebase --edit-todo' and `rebase --continue'
to check if commits were dropped by the user. As both edit_todo_list()
and complete_action() parse the todo list and check for dropped commits,
the code doing so in the latter is removed to reduce duplication.
`edit_todo_list_advice' is removed from sequencer.c as it is no longer
used there.
This changes when a backup of the todo list is made. Until now, it was
saved only once, before the initial edit. Now, it is also made if the
original todo list has no errors or no dropped commits. Thus, the
backup should be error-free. Without this, sequencer_continue()
(`rebase --continue') could only compare the current todo list against
the original, unedited list. Before this change, this file was only
used by edit_todo_list() and `rebase -p' to create the backup before
the initial edit, and check_todo_list_from_file(), only used by
`rebase -p' to check for dropped commits after its own initial edit.
If the edited list has an error, a file, `dropped', is created to
report the issue. Otherwise, it is deleted. Usually, the edited list
is compared against the list before editing, but if this file exists,
it will be compared to the backup. Also, if the file exists,
sequencer_continue() checks the list for dropped commits. If the
check was performed every time, it would fail when resuming a rebase
after resolving a conflict, as the backup will contain commits that
were picked, but they will not be in the new list. It's safe to
ignore this check if `dropped' does not exist, because that means that
no errors were found at the last edition, so any missing commits here
have already been picked.
Five tests are added to t3404. The tests for
`rebase.missingCommitsCheck = warn' and `rebase.missingCommitsCheck =
error' have a similar structure. First, we start a rebase with an
incorrect command on the first line. Then, we edit the todo list,
removing the first and the last lines. This demonstrates that
`--edit-todo' notices dropped commits, but not when the command is
incorrect. Then, we restore the original todo list, and edit it to
remove the last line. This demonstrates that if we add a commit after
the initial edit, then remove it, `--edit-todo' will notice that it
has been dropped. Then, the actual rebase takes place. In the third
test, it is also checked that `--continue' will refuse to resume the
rebase if commits were dropped. The fourth test checks that no errors
are raised when resuming a rebase after resolving a conflict, the fifth
checks that no errors are raised when editing the todo list after
pausing the rebase.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When `rebase.missingCommitsCheck` is in effect, we use the backup of the
todo list that was copied just before the user was allowed to edit it.
That backup is, of course, just as susceptible to the hash collision as
the todo list itself: a reworded commit could make a previously
unambiguous short commit ID ambiguous all of a sudden.
So let's not just copy the todo list, but let's instead write out the
backup with expanded commit IDs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 66ae9a57b88 (t3404: rebase -i: demonstrate short SHA-1 collision,
2013-08-23), we added a test case that demonstrated how it is possible
that a previously unambiguous short commit ID could become ambiguous
*during* a rebase.
In 75c69766554 (rebase -i: fix short SHA-1 collision, 2013-08-23), we
fixed that problem simply by writing out the todo list with expanded
commit IDs (except *right* before letting the user edit the todo list,
in which case we shorten them, but we expand them right after the file
was edited).
However, the bug resurfaced as a side effect of 393adf7a6f6 (sequencer:
directly call pick_commits() from complete_action(), 2019-11-24): as of
this commit, the sequencer no longer re-reads the todo list after
writing it out with expanded commit IDs.
The only redeeming factor is that the todo list is already parsed at
that stage, including all the commits corresponding to the commands,
therefore the sequencer can continue even if the internal todo list has
short commit IDs.
That does not prevent problems, though: the sequencer writes out the
`done` and `git-rebase-todo` files incrementally (i.e. overwriting the
todo list with a version that has _short_ commit IDs), and if a merge
conflict happens, or if an `edit` or a `break` command is encountered, a
subsequent `git rebase --continue` _will_ re-read the todo list, opening
an opportunity for the "short SHA-1 collision" bug again.
To avoid that, let's make sure that we do expand the commit IDs in the
todo list as soon as we have parsed it after letting the user edit it.
Additionally, we improve the 'short SHA-1 collide' test case in t3404 to
test specifically for the case where the rebase is resumed. We also
hard-code the expected colliding short SHA-1s, to document the
expectation (and to make it easier on future readers).
Note that we specifically test that the short commit ID is used in the
`git-rebase-todo.tmp` file: this file is created by the fake editor in
the test script and reflects the state that would have been presented to
the user to edit.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
t3404.3 is a simple test added by commit d078c3910689 ("t3404: todo list
with commented-out commands only aborts", 2018-08-10) which was designed
to test a todo list that only contained commented-out commands. There
were two problems with this test: (1) its title did not reflect the
purpose of the test, and (2) it tested the desired behavior through a
side-effect of other functionality instead of directly testing the
desired behavior discussed in the commit message.
Modify the test to directly test the desired behavior and update the
test title.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This test case was added in 66ae9a57b88 (t3404: rebase -i: demonstrate
short SHA-1 collision, 2013-08-23), and it is not indented in the way we
usually indent sub-shell code in our test cases these days.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In dcb500dc16c (cherry-pick/revert: advise using --skip, 2019-07-02),
`git commit` learned to suggest to run `git cherry-pick --skip` when
trying to cherry-pick an empty patch.
However, it was overlooked that there are more conditions than just a
`git cherry-pick` when this advice is printed (which originally
suggested the neutral `git reset`): the same can happen during a rebase.
Let's suggest the correct command, even during a rebase.
While at it, we adjust more places in `builtin/commit.c` that
incorrectly assumed that the presence of a `CHERRY_PICK_HEAD` meant that
surely this must be a `cherry-pick` in progress.
Note: we take pains to handle the situation when a user runs a `git
cherry-pick` _during_ a rebase. This is quite valid (e.g. in an `exec`
line in an interactive rebase). On the other hand, it is not possible to
run a rebase during a cherry-pick, meaning: if both `rebase-merge/` and
`sequencer/` exist or CHERRY_PICK_HEAD and REBASE_HEAD point to the same
commit , we still want to advise to use `git cherry-pick --skip`.
Original-patch-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are a number of places where we compare two revisions with
test $(git rev-parse rev1) = $(git rev-parse rev2)
when these fail there's no indication what has gone wrong and you need
to be running with `-x` to see where the test has failed. Lets use
test_cmp_rev instead.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"rebase -i" ceased to run post-commit hook by mistake in an earlier
update, which has been corrected.
* pw/post-commit-from-sequencer:
sequencer: run post-commit hook
move run_commit_hook() to libgit and use it there
sequencer.h fix placement of #endif
t3404: remove uneeded calls to set_fake_editor
t3404: set $EDITOR in subshell
t3404: remove unnecessary subshell
|
|
Prior to commit 356ee4659b ("sequencer: try to commit without forking
'git commit'", 2017-11-24) the sequencer would always run the
post-commit hook after each pick or revert as it forked `git commit` to
create the commit. The conversion to committing without forking `git
commit` omitted to call the post-commit hook after creating the commit.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some tests were calling set_fake_editor to ensure they had a sane no-op
editor set. Now that all the editor setting is done in subshells these
tests can rely on EDITOR=: and so do not need to call set_fake_editor.
Also add a test at the end to detect any future additions messing with
the exported value of $EDITOR.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As $EDITOR is exported setting it in one test affects all subsequent
tests. Avoid this by always setting it in a subshell. This commit leaves
20 calls to set_fake_editor that are not in subshells as they can
safely be removed in the next commit once all the other editor setting
is done inside subshells.
I have moved the call to set_fake_editor in some tests so it comes
immediately before the call to 'git rebase' to avoid moving unrelated
commands into the subshell. In one case ('rebase -ix with
--autosquash') the call to set_fake_editor is moved past an invocation
of 'git rebase'. This is safe as that invocation of 'git rebase'
requires EDITOR=: or EDITOR=fake-editor.sh without FAKE_LINES being
set which will be the case as the preceding tests either set their
editor in a subshell or call set_fake_editor without setting FAKE_LINES.
In a one test ('auto-amend only edited commits after "edit"') a call
to test_tick are now in a subshell. I think this is OK as it is there
to set the date for the next commit which is executed in the same
subshell rather than updating GIT_COMMITTER_DATE for later tests (the
next test calls test_tick before doing anything else).
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Neither of the commands executed in the subshell change any shell
variables or the current directory so there is no need for them to be
executed in a subshell.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -i" showed a wrong HEAD while "reword" open the editor.
* pw/rebase-i-show-HEAD-to-reword:
sequencer: simplify root commit creation
rebase -i: check for updated todo after squash and reword
rebase -i: always update HEAD before rewording
|
|
"git rebase --keep-base <upstream>" tries to find the original base
of the topic being rebased and rebase on top of that same base,
which is useful when running the "git rebase -i" (and its limited
variant "git rebase -x").
The command also has learned to fast-forward in more cases where it
can instead of replaying to recreate identical commits.
* dl/rebase-i-keep-base:
rebase: teach rebase --keep-base
rebase tests: test linear branch topology
rebase: fast-forward --fork-point in more cases
rebase: fast-forward --onto in more cases
rebase: refactor can_fast_forward into goto tower
t3432: test for --no-ff's interaction with fast-forward
t3432: distinguish "noop-same" v.s. "work-same" in "same head" tests
t3432: test rebase fast-forward behavior
t3431: add rebase --fork-point tests
|
|
Code cleanup.
* dl/use-sq-from-test-lib:
t: use common $SQ variable
|
|
Preparation for SHA-256 upgrade continues in the test department.
* bc/hash-independent-tests-part-5:
t4009: make hash size independent
t4002: make hash independent
t4000: make hash size independent
t3903: abstract away SHA-1-specific constants
t3800: make hash-size independent
t3600: make hash size independent
t3506: make hash independent
t3430: avoid hard-coded object IDs
t3404: abstract away SHA-1-specific constants
t3306: abstract away SHA-1-specific constants
t3305: make hash size independent
t3301: abstract away SHA-1-specific constants
t3206: abstract away hash size constants
t3201: abstract away SHA-1-specific constants
|
|
In many test scripts, there are bespoke definitions of the single quote
that are some variation of this:
SQ="'"
Define a common $SQ variable in test-lib.sh and replace all usages of
these bespoke variables with the common one.
This change was done by running `git grep =\"\'\" t/` and
`git grep =\\\\\'` and manually changing the resulting definitions and
corresponding usages.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few test scripts assign a single LF to $LF, but that is already
given by test-lib.sh to everybody.
Remove the unnecessary reassignment.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Before, when we had the following graph,
A---B---C (master)
\
D (side)
running 'git rebase --onto master... master side' would result in D
being always rebased, no matter what. However, the desired behavior is
that rebase should notice that this is fast-forwardable and do that
instead.
Add detection to `can_fast_forward` so that this case can be detected
and a fast-forward will be performed. First of all, rewrite the function
to use gotos which simplifies the logic. Next, since the
options.upstream &&
!oidcmp(&options.upstream->object.oid, &options.onto->object.oid)
conditions were removed in `cmd_rebase`, we reintroduce a substitute in
`can_fast_forward`. In particular, checking the merge bases of
`upstream` and `head` fixes a failing case in t3416.
The abbreviated graph for t3416 is as follows:
F---G topic
/
A---B---C---D---E master
and the failing command was
git rebase --onto master...topic F topic
Before, Git would see that there was one merge base (C), and the merge
and onto were the same so it would incorrectly return 1, indicating that
we could fast-forward. This would cause the rebased graph to be 'ABCFG'
when we were expecting 'ABCG'.
With the additional logic, we detect that upstream and head's merge base
is F. Since onto isn't F, it means we're not rebasing the full set of
commits from master..topic. Since we're excluding some commits, a
fast-forward cannot be performed and so we correctly return 0.
Add '-f' to test cases that failed as a result of this change because
they were not expecting a fast-forward so that a rebase is forced.
Helped-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Adjust the test so that it computes variables for object IDs instead of
using hard-coded hashes. Add a use of $EMPTY_TREE instead of a
hard-coded value. Remove a comment about hard-coded hashes which is no
longer applicable.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user runs git log while rewording a commit it is confusing if
sometimes we're amending the commit that's being reworded and at other
times we're creating a new commit depending on whether we could
fast-forward or not[1]. Fix this inconsistency by always committing the
picked commit and then running 'git commit --amend' to do the reword.
The first commit is performed by the sequencer without forking git
commit and does not impact on the speed of rebase. In a test rewording
100 commits with
GIT_EDITOR=true GIT_SEQUENCE_EDITOR='sed -i s/pick/reword/' \
../bin-wrappers/git rebase -i --root
and taking the best of three runs the current master took
957ms and with this patch it took 961ms.
This change fixes rewording the new root commit when rearranging commits
with --root.
Note that the new code no longer updates CHERRY_PICK_HEAD after creating
a root commit - I'm not sure why the old code was that creating that ref
after a successful commit, everywhere else it is removed after a
successful commit.
[1] https://public-inbox.org/git/xmqqlfvu4be3.fsf@gitster-ct.c.googlers.com/T/#m133009cb91cf0917bcf667300f061178be56680a
Reported-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use "Erase in Line" CSI sequence that is already used in the editor
support to clear cruft in the progress output.
* sg/rebase-progress:
progress: use term_clear_line()
rebase: fix garbled progress display with '-x'
pager: add a helper function to clear the last line in the terminal
t3404: make the 'rebase.missingCommitsCheck=ignore' test more focused
t3404: modernize here doc style
|
|
Typofix.
* js/t3404-typofix:
t3404: fix a typo
|
|
Use "Erase in Line" CSI sequence that is already used in the editor
support to clear cruft in the progress output.
* sg/rebase-progress:
progress: use term_clear_line()
rebase: fix garbled progress display with '-x'
pager: add a helper function to clear the last line in the terminal
t3404: make the 'rebase.missingCommitsCheck=ignore' test more focused
t3404: modernize here doc style
|
|
Typofix.
* js/t3404-typofix:
t3404: fix a typo
|
|
The test 'rebase -i respects rebase.missingCommitsCheck = warn' is
mainly interested in the warning about the dropped commits, but it
checks the whole output of 'git rebase', including progress lines and
what not that are not at all relevant to 'rebase.missingCommitsCheck',
but make it necessary to update this test whenever e.g. the way we
show progress is updated (as it will happen in one of the later
patches of this series).
Modify the test to verify only the first four lines of 'git rebase's
output that contain all the important lines, notably the line
containing the "Warning:" itself and the oneline log of the dropped
commit.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In 't3404-rebase-interactive.sh' the expected output of several tests
is prepared from here documents, which are outside of
'test_expect_success' blocks and have spaces around redirection
operators.
Move these here documents into the corresponding 'test_expect_success'
block and avoid spaces between filename and redition operators.
Furthermore, quote the here docs' delimiter word to prevent parameter
expansions and what not, where applicable.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This one slipped through the review of a9279c678588 (sequencer: do not
squash 'reword' commits when we hit conflicts, 2018-06-19).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Remove the rebase.useBuiltin setting, which was added as an escape
hatch to disable the builtin version of rebase first released with Git
2.20.
See [1] for the initial implementation of rebase.useBuiltin, and [2]
and [3] for the documentation and corresponding
GIT_TEST_REBASE_USE_BUILTIN option.
Carrying the legacy version is a maintenance burden as seen in
7e097e27d3 ("legacy-rebase: backport -C<n> and --whitespace=<option>
checks", 2018-11-20) and 9aea5e9286 ("rebase: fix regression in
rebase.useBuiltin=false test mode", 2019-02-13). Since the built-in
version has been shown to be stable enough let's remove the legacy
version.
As noted in [3] having use_builtin_rebase() shell out to get its
config doesn't make any sense anymore, that was done for the purposes
of spawning the legacy rebase without having modified any global
state. Let's instead handle this case in rebase_config().
There's still a bunch of references to git-legacy-rebase in po/*.po,
but those will be dealt with in time by the i18n effort.
Even though this configuration variable only existed two releases
let's not entirely delete the entry from the docs, but note its
absence. Individual versions of git tend to be around for a while due
to distro packaging timelines, so e.g. if we're "lucky" a given
version like 2.21 might be installed on say OSX for half a decade.
That'll mean some people probably setting this in config, and then
when they later wonder if it's needed they can Google search the
config option name or check it in git-config. It also allows us to
refer to the docs from the warning for details.
1. 55071ea248 ("rebase: start implementing it as a builtin",
2018-08-07)
2. d8d0a546f0 ("rebase doc: document rebase.useBuiltin", 2018-11-14)
3. 62c23938fa ("tests: add a special setup where rebase.useBuiltin is
off", 2018-11-14)
3. https://public-inbox.org/git/nycvar.QRO.7.76.6.1903141544110.41@tvgsbejvaqbjf.bet/
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a recently introduced regression in c762aada1a ("rebase -x: sanity
check command", 2019-01-29) triggered when running the tests with
GIT_TEST_REBASE_USE_BUILTIN=false. See 62c23938fa ("tests: add a
special setup where rebase.useBuiltin is off", 2018-11-14) for how
that test mode works.
As discussed on-list[1] it's not worth it to implement the sanity
check in the legacy rebase code, we plan to remove it after the 2.21
release. So let's do the bare minimum to make the tests pass under the
GIT_TEST_REBASE_USE_BUILTIN=false special setup.
1. https://public-inbox.org/git/xmqqva1nbeno.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -x $cmd" did not reject multi-line command, even though
the command is incapable of handling such a command. It now is
rejected upfront.
* pw/rebase-x-sanity-check:
rebase -x: sanity check command
|
|
If the user gives an empty argument to --exec then git creates a todo
list that it cannot parse. The rebase starts to run before erroring out
with
error: missing arguments for exec
error: invalid line 2: exec
You can fix this with 'git rebase --edit-todo' and then run 'git rebase --continue'.
Or you can abort the rebase with 'git rebase --abort'.
Instead check for empty commands before starting the rebase.
Also check that the command does not contain any newlines as the
todo-list format is unable to cope with multiline commands. Note that
this changes the behavior, before this change one could do
git rebase --exec='echo one
exec echo two'
and it would insert two exec lines in the todo list, now it will error
out.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If GIT_SEQUENCE_EDITOR is set then rebase runs it when executing
implicit interactive rebases which are supposed to appear
non-interactive to the user. Fix this by setting GIT_SEQUENCE_EDITOR=:
rather than GIT_EDITOR=:. A couple of tests relied on the old behavior
so they are updated to work with the new regime.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In preparation to the day when we can deprecate and remove the
"rebase -p", make sure we can skip and later remove tests for
it.
* js/rebase-p-tests:
tests: optionally skip `git rebase -p` tests
t3418: decouple test cases from a previous `rebase -p` test case
t3404: decouple some test cases from outcomes of previous test cases
|
|
* sg/test-rebase-editor-fix:
t3404-rebase-interactive: test abbreviated commands
|
|
The `--preserve-merges` mode of the `rebase` command is slated to be
deprecated soon, as the more powerful `--rebase-merges` mode is
available now, and the latter was designed with the express intent to
address the shortcomings of `--preserve-merges`' design (e.g. the
inability to reorder commits in an interactive rebase).
As such, we will eventually even remove the `--preserve-merges` support,
and along with it, its tests.
In preparation for this, and also to allow the Windows phase of our
automated tests to save some well-needed time when running the test
suite, this commit introduces a new prerequisite REBASE_P, which can be
forced to being unmet by setting the environment variable
`GIT_TEST_SKIP_REBASE_P` to any non-empty string.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Originally, the `--preserve-merges` option of the `git rebase` command
piggy-backed on top of the `--interactive` feature. For that reason, the
early test cases were added to the very same test script that contains
the `git rebase -i` tests: `t3404-rebase-interactive.sh`.
However, since c42abfe7857 (rebase: introduce a dedicated backend for
--preserve-merges, 2018-05-28), the `--preserve-merges` feature got its
own backend, in preparation for converting the rest of the
`--interactive` code to built-in code, written in C rather than shell.
The reason why the `--preserve-merges` feature was not converted at the
same time is that we have something much better now: `--rebase-merges`.
That option intends to supersede `--preserve-merges`, and we will
probably deprecate the latter soon.
Once `--preserve-merges` has been deprecated for a good amount of time,
it will be time to remove it, and along with it, its tests.
In preparation for that, let's make the rest of the test cases in
`t3404-rebase-interactive.sh` independent of the test cases dedicated to
`--preserve-merges`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rewrite of the remaining "rebase -i" machinery in C.
* ag/rebase-i-in-c:
rebase -i: move rebase--helper modes to rebase--interactive
rebase -i: remove git-rebase--interactive.sh
rebase--interactive2: rewrite the submodes of interactive rebase in C
rebase -i: implement the main part of interactive rebase as a builtin
rebase -i: rewrite init_basic_state() in C
rebase -i: rewrite write_basic_state() in C
rebase -i: rewrite the rest of init_revisions_and_shortrevisions() in C
rebase -i: implement the logic to initialize $revisions in C
rebase -i: remove unused modes and functions
rebase -i: rewrite complete_action() in C
t3404: todo list with commented-out commands only aborts
sequencer: change the way skip_unnecessary_picks() returns its result
sequencer: refactor append_todo_help() to write its message to a buffer
rebase -i: rewrite checkout_onto() in C
rebase -i: rewrite setup_reflog_action() in C
sequencer: add a new function to silence a command, except if it fails
rebase -i: rewrite the edit-todo functionality in C
editor: add a function to launch the sequence editor
rebase -i: rewrite append_todo_help() in C
sequencer: make three functions and an enum from sequencer.c public
|
|
Make sure that each short command is tested at least once. To
not exacerbate the runtime of the test script, do not add new
tests, but modify existing ones according to these criteria:
- The test does not have a prerequisite.
- The 'git rebase' command is not guarded by test_must_fail.
The pick commands are optional in the FAKE_LINES variable, but
when used, they do end up in the insn sheet. Test them, too.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase" etc. in Git 2.19 fails to abort when given an empty
commit log message as result of editing, which has been corrected.
* en/sequencer-empty-edit-result-aborts:
sequencer: fix --allow-empty-message behavior, make it smarter
|
|
In commit b00bf1c9a8dd ("git-rebase: make --allow-empty-message the
default", 2018-06-27), several arguments were given for transplanting
empty commits without halting and asking the user for confirmation on
each commit. These arguments were incomplete because the logic clearly
assumed the only cases under consideration were transplanting of commits
with empty messages (see the comment about "There are two sources for
commits with empty messages). It didn't discuss or even consider
rewords, squashes, etc. where the user is explicitly asked for a new
commit message and provides an empty one. (My bad, I totally should
have thought about that at the time, but just didn't.)
Rewords and squashes are significantly different, though, as described
by SZEDER:
Let's suppose you start an interactive rebase, choose a commit to
squash, save the instruction sheet, rebase fires up your editor, and
then you notice that you mistakenly chose the wrong commit to
squash. What do you do, how do you abort?
Before [that commit] you could clear the commit message, exit the
editor, and then rebase would say "Aborting commit due to empty
commit message.", and you get to run 'git rebase --abort', and start
over.
But [since that commit, ...] saving the commit message as is would
let rebase continue and create a bunch of unnecessary objects, and
then you would have to use the reflog to return to the pre-rebase
state.
Also, he states:
The instructions in the commit message template, which is shown for
'reword' and 'squash', too, still say...
# Please enter the commit message for your changes. Lines starting
# with '#' will be ignored, and an empty message aborts the commit.
These are sound arguments that when editing commit messages during a
sequencer operation, that if the commit message is empty then the
operation should halt and ask the user to correct. The arguments in
commit b00bf1c9a8dd (referenced above) still apply when transplanting
previously created commits with empty commit messages, so the sequencer
should not halt for those.
Furthermore, all rationale so far applies equally for cherry-pick as for
rebase. Therefore, make the code default to --allow-empty-message when
transplanting an existing commit, and to default to halting when the
user is asked to edit a commit message and provides an empty one -- for
both rebase and cherry-pick.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent "git rebase -i" update started to write bogusly formatted
author-script, with a matching broken reading code. These are
fixed.
* pw/rebase-i-author-script-fix:
sequencer: fix quoting in write_author_script
sequencer: handle errors from read_author_ident()
|
|
This rewrites complete_action() from shell to C.
A new mode is added to rebase--helper (`--complete-action`), as well as
a new flag (`--autosquash`).
Finally, complete_action() is stripped from git-rebase--interactive.sh.
The original complete_action() would return the code 2 when the todo
list contained no actions. This was a special case for rebase -i and
-p; git-rebase.sh would then apply the autostash, delete the state
directory, and die with the message "Nothing to do". This cleanup is
rewritten in C instead of returning 2. As rebase -i no longer returns
2, the comment describing this behaviour in git-rebase.sh is updated to
reflect this change.
The message "Nothing to do" is now printed with error(), and so becomes
"error: nothing to do". Some tests in t3404 check this value, so they
are updated to fit this change.
The first check might seem useless as we write "noop" to the todo list
if it is empty. Actually, the todo list might contain commented
commands (ie. empty commits). In this case, complete_action() won’t
write "noop", and will abort without starting the editor.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test fixes.
* sg/test-must-be-empty:
tests: use 'test_must_be_empty' instead of 'test_cmp <empty> <out>'
tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>'
tests: use 'test_must_be_empty' instead of 'test ! -s'
tests: use 'test_must_be_empty' instead of '! test -s'
|
|
Using 'test_must_be_empty' is shorter and more idiomatic than
>empty &&
test_cmp empty out
as it saves the creation of an empty file. Furthermore, sometimes the
expected empty file doesn't have such a descriptive name like 'empty',
and its creation is far away from the place where it's finally used
for comparison (e.g. in 't7600-merge.sh', where two expected empty
files are created in the 'setup' test, but are used only about 500
lines later).
These cases were found by instrumenting 'test_cmp' to error out the
test script when it's used to compare empty files, and then converted
manually.
Note that even after this patch there still remain a lot of cases
where we use 'test_cmp' to check empty files:
- Sometimes the expected output is not hard-coded in the test, but
'test_cmp' is used to ensure that two similar git commands produce
the same output, and that output happens to be empty, e.g. the
test 'submodule update --merge - ignores --merge for new
submodules' in 't7406-submodule-update.sh'.
- Repetitive common tasks, including preparing the expected results
and running 'test_cmp', are often extracted into a helper
function, and some of this helper's callsites expect no output.
- For the same reason as above, the whole 'test_expect_success'
block is within a helper function, e.g. in 't3070-wildmatch.sh'.
- Or 'test_cmp' is invoked in a loop, e.g. the test 'cvs update
(-p)' in 't9400-git-cvsserver-server.sh'.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "author-script" file "git rebase -i" creates got broken when
we started to move the command away from shell script, which is
getting fixed now.
* es/rebase-i-author-script-fix:
sequencer: don't die() on bogus user-edited timestamp
sequencer: fix "rebase -i --root" corrupting author header timestamp
sequencer: fix "rebase -i --root" corrupting author header timezone
sequencer: fix "rebase -i --root" corrupting author header
|
|
If the todo list generated by `--make-script` is empty,
complete_action() writes a noop, but if it has only commented-out
commands, it will abort with the message "Nothing to do", and does not
launch the editor. This adds a new test to ensure that
complete_action() behaves this way.
Signed-off-by: Alban Gruin <alban.gruin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Single quotes should be escaped as \' not \\'. The bad quoting breaks
the interactive version of 'rebase --root' (which is used when there
is no '--onto' even if the user does not specify --interactive) for
authors that contain "'" as sq_dequote() called by read_author_ident()
errors out on the bad quoting.
For other interactive rebases this only affects external scripts that
read the author script and users whose git is upgraded from the shell
version of rebase -i while rebase was stopped when the author contains
"'". This is because the parsing in read_env_script() expected the
broken quoting.
This patch includes code to handle the broken quoting when
git has been upgraded while rebase was stopped. It does this by
detecting the missing "'" at the end of the GIT_AUTHOR_DATE line to see
if it should dequote \\' as "'". Note this is only implemented for
normal picks, not for creating a new root commit (rebase will stop with
an error complaining out bad quoting in that case).
The fallback code has been manually tested by reverting both the quoting
fixes in write_author_script() and the previous fix for the missing "'"
at the end of the GIT_AUTHOR_DATE line and running
t3404-rebase-interactive.sh.
Ideally rebase and am would share the same code for reading and
writing the author script, but this commit just fixes the immediate
bug.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase" started exporting GIT_DIR environment variable and
exposing it to hook scripts when part of it got rewritten in C.
Instead of matching the old scripted Porcelains' behaviour,
compensate by also exporting GIT_WORK_TREE environment as well to
lessen the damage. This can harm existing hooks that want to
operate on different repository, but the current behaviour is
already broken for them anyway.
* bc/sequencer-export-work-tree-as-well:
sequencer: pass absolute GIT_WORK_TREE to exec commands
|
|
Test clean-up and corrections.
* es/test-fixes: (26 commits)
t5608: fix broken &&-chain
t9119: fix broken &&-chains
t9000-t9999: fix broken &&-chains
t7000-t7999: fix broken &&-chains
t6000-t6999: fix broken &&-chains
t5000-t5999: fix broken &&-chains
t4000-t4999: fix broken &&-chains
t3030: fix broken &&-chains
t3000-t3999: fix broken &&-chains
t2000-t2999: fix broken &&-chains
t1000-t1999: fix broken &&-chains
t0000-t0999: fix broken &&-chains
t9814: simplify convoluted check that command correctly errors out
t9001: fix broken "invoke hook" test
t7810: use test_expect_code() instead of hand-rolled comparison
t7400: fix broken "submodule add/reconfigure --force" test
t7201: drop pointless "exit 0" at end of subshell
t6036: fix broken "merge fails but has appropriate contents" tests
t5505: modernize and simplify hard-to-digest test
t5406: use write_script() instead of birthing shell script manually
...
|
|
When "git rebase -i --root" creates a new root commit, it corrupts the
"author" header's timestamp by prepending a "@":
author A U Thor <author@example.com> @1112912773 -0700
The commit parser is very strict about the format of the "author"
header, and does not allow a "@" in that position.
The "@" comes from GIT_AUTHOR_DATE in "rebase-merge/author-script",
signifying a Unix epoch-based timestamp, however, read_author_ident()
incorrectly allows it to slip into the commit's "author" header, thus
corrupting it.
One possible fix would be simply to filter out the "@" when constructing
the "author" header timestamp, however, a more correct fix is to parse
the GIT_AUTHOR_DATE date (via parse_date()) and format the parsed result
into the "author" header. Since "rebase-merge/author-script" may be
edited by the user, this approach has the extra benefit of catching
other potential timestamp corruption due to hand-editing.
We can do better than calling parse_date() ourselves and constructing
the "author" header manually, however, by instead taking advantage of
fmt_ident() which does this work for us.
The benefits of using fmt_ident() are twofold. First, it simplifies the
logic considerably by allowing us to avoid the complexity of building
the "author" header in parallel with and in the same buffer from which
"rebase-merge/author-script" is being parsed. Instead, fmt_ident() is
invoked to compose the header after parsing is complete.
Second, fmt_ident() is careful to prevent "crud" from polluting the
composed ident. As with validating GIT_AUTHOR_DATE, this "crud"
avoidance prevents other (possibly hand-edited) bogus author information
from "rebase-merge/author-script" from corrupting the commit object.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git rebase -i --root" creates a new root commit, it corrupts the
"author" header's timezone by repeating the last digit:
author A U Thor <author@example.com> @1112912773 -07000
This is due to two bugs.
First, write_author_script() neglects to add the closing quote to the
value of GIT_AUTHOR_DATE when generating "rebase-merge/author-script".
Second, although sq_dequote() correctly diagnoses the missing closing
quote, read_author_ident() ignores sq_dequote()'s return value and
blindly uses the result of the aborted dequote.
sq_dequote() performs dequoting in-place by removing quoting and
shifting content downward. When it detects misquoting (lack of closing
quote, in this case), it gives up and returns an error without inserting
a NUL-terminator at the end of the shifted content, which explains the
duplicated last digit in the timezone.
(Note that the "@" preceding the timestamp is a separate bug which
will be fixed subsequently.)
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When "git rebase -i --root" creates a new root commit (say, by swapping
in a different commit for the root), it corrupts the commit's "author"
header with trailing garbage:
author A U Thor <author@example.com> @1112912773 -07000or@example.com
This is a result of read_author_ident() neglecting to NUL-terminate the
buffer into which it composes the "author" header.
(Note that the "@" preceding the timestamp and the extra "0" in the
timezone are separate bugs which will be fixed subsequently.)
Security considerations: Construction of the "author" header by
read_author_ident() happens in-place and in parallel with parsing the
content of "rebase-merge/author-script" which occupies the same buffer.
This is possible because the constructed "author" header is always
smaller than the content of "rebase-merge/author-script". Despite
neglecting to NUL-terminate the constructed "author" header, memory is
never accessed (either by read_author_ident() or its caller) beyond the
allocated buffer since a NUL-terminator is present at the end of the
loaded "rebase-merge/author-script" content, and additional NUL's are
inserted as part of the parsing process.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Correct a broken use of "VAR=VAL shell_func" in a test.
* jc/t3404-one-shot-export-fix:
t3404: fix use of "VAR=VAL cmd" with a shell function
|
|
"git rebase" behaved slightly differently depending on which one of
the three backends gets used; this has been documented and an
effort to make them more uniform has begun.
* en/rebase-consistency:
git-rebase: make --allow-empty-message the default
t3401: add directory rename testcases for rebase and am
git-rebase.txt: document behavioral differences between modes
directory-rename-detection.txt: technical docs on abilities and limitations
git-rebase.txt: address confusion between --no-ff vs --force-rebase
git-rebase: error out when incompatible options passed
t3422: new testcases for checking when incompatible options passed
git-rebase.sh: update help messages a bit
git-rebase.txt: document incompatible options
|
|
The sequencer currently passes GIT_DIR, but not GIT_WORK_TREE, to exec
commands. In that configuration, we assume that whatever directory
we're in is the top level of the work tree, and git rev-parse
--show-toplevel responds accordingly. However, when we're in a
subdirectory, that isn't correct: we respond with the subdirectory as
the top level, resulting in unexpected behavior.
Ensure that we pass GIT_WORK_TREE as well as GIT_DIR so that git
operations within subdirectories work correctly.
Note that we are guaranteed to have a work tree in this case: the
relevant sequencer functions are called only from revert, cherry-pick,
and rebase--helper; all of these commands require a working tree.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Bash may take it happily but running test with dash reveals a breakage.
This was not discovered for a long time as no tests after this test
depended on GIT_AUTHOR_NAME to be reverted correctly back to the
original value after this step is done.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These tests employ a noisy subshell (with missing &&-chain) to feed
input into Git commands or files:
(echo a; echo b; echo c) | git some-command ...
Simplify by taking advantage of test_write_lines():
test_write_lines a b c | git some-command ...
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
rebase backends currently behave differently with empty commit messages,
largely as a side-effect of the different underlying commands on which
they are based. am-based rebases apply commits with an empty commit
message without stopping or requiring the user to specify an extra flag.
(It is interesting to note that am-based rebases are the default rebase
type, and no one has ever requested a --no-allow-empty-message flag to
change this behavior.) merge-based and interactive-based rebases (which
are ultimately based on git-commit), will currently halt on any such
commits and require the user to manually specify what to do with the
commit and continue.
One possible rationale for the difference in behavior is that the purpose
of an "am" based rebase is solely to transplant an existing history, while
an "interactive" rebase is one whose purpose is to polish a series before
making it publishable. Thus, stopping and asking for confirmation for a
possible problem is more appropriate in the latter case. However, there
are two problems with this rationale:
1) merge-based rebases are also non-interactive and there are multiple
types of rebases that use the interactive machinery but are not
explicitly interactive (e.g. when either --rebase-merges or
--keep-empty are specified without --interactive). These rebases are
also used solely to transplant an existing history, and thus also
should default to --allow-empty-message.
2) this rationale only says that the user is more accepting of stopping
in the case of an explicitly interactive rebase, not that stopping
for this particular reason actually makes sense. Exploring whether
it makes sense, requires backing up and analyzing the underlying
commands...
If git-commit did not error out on empty commits by default, accidental
creation of commits with empty messages would be a very common occurrence
(this check has caught me many times). Further, nearly all such empty
commit messages would be considered an accidental error (as evidenced by a
huge amount of documentation across version control systems and in various
blog posts explaining how important commit messages are). A simple check
for what would otherwise be a common error thus made a lot of sense, and
git-commit gained an --allow-empty-message flag for special case
overrides. This has made commits with empty messages very rare.
There are two sources for commits with empty messages for rebase (and
cherry-pick): (a) commits created in git where the user previously
specified --allow-empty-message to git-commit, and (b) commits imported
into git from other version control systems. In case (a), the user has
already explicitly specified that there is something special about this
commit that makes them not want to specify a commit message; forcing them
to re-specify with every cherry-pick or rebase seems more likely to be
infuriating than helpful. In case (b), the commit is highly unlikely to
have been authored by the person who has imported the history and is doing
the rebase or cherry-pick, and thus the user is unlikely to be the
appropriate person to write a commit message for it. Stopping and
expecting the user to modify the commit before proceeding thus seems
counter-productive.
Further, note that while empty commit messages was a common error case for
git-commit to deal with, it is a rare case for rebase (or cherry-pick).
The fact that it is rare raises the question of why it would be worth
checking and stopping on this particular condition and not others. For
example, why doesn't an interactive rebase automatically stop if the
commit message's first line is 2000 columns long, or is missing a blank
line after the first line, or has every line indented with five spaces, or
any number of other myriad problems?
Finally, note that if a user doing an interactive rebase does have the
necessary knowledge to add a message for any such commit and wants to do
so, it is rather simple for them to change the appropriate line from
'pick' to 'reword'. The fact that the subject is empty in the todo list
that the user edits should even serve as a way to notify them.
As far as I can tell, the fact that merge-based and interactive-based
rebases stop on commits with empty commit messages is solely a by-product
of having been based on git-commit. It went without notice for a long
time precisely because such cases are rare. The rareness of this
situation made it difficult to reason about, so when folks did eventually
notice this behavior, they assumed it was there for a good reason and just
added an --allow-empty-message flag. In my opinion, stopping on such
messages not desirable in any of these cases, even the (explicitly)
interactive case.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ever since commit 18633e1a22 ("rebase -i: use the rebase--helper builtin",
2017-02-09), when a commit marked as 'reword' in an interactive rebase
has conflicts and fails to apply, when the rebase is resumed that commit
will be squashed into its parent with its commit message taken.
The issue can be understood better by looking at commit 56dc3ab04b
("sequencer (rebase -i): implement the 'edit' command", 2017-01-02), which
introduced error_with_patch() for the edit command. For the edit command,
it needs to stop the rebase whether or not the patch applies cleanly. If
the patch does apply cleanly, then when it resumes it knows it needs to
amend all changes into the previous commit. If it does not apply cleanly,
then the changes should not be amended. Thus, it passes !res (success of
applying the 'edit' commit) to error_with_patch() for the to_amend flag.
The problematic line of code actually came from commit 04efc8b57c
("sequencer (rebase -i): implement the 'reword' command", 2017-01-02).
Note that to get to this point in the code:
* !!res (i.e. patch application failed)
* item->command < TODO_SQUASH
* item->command != TODO_EDIT
* !is_fixup(item->command) [i.e. not squash or fixup]
So that means this can only be a failed patch application that is either a
pick, revert, or reword. We only need to amend HEAD when rewording the
root commit or a commit that has been fast-forwarded, for any of the other
cases we want a new commit, so we should not set the to_amend flag.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Original-patch-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When testing a reworded root commit, ensure that the squash-onto commit
which is created and amended is still the root commit.
Suggested-by: Phillip Wood <phillip.wood@talktalk.net>
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The code path that triggered that "BUG" really does not want to run
without an explicit commit message. In the case where we want to amend a
commit message, we have an *implicit* commit message, though: the one of
the commit to amend. Therefore, this code path should not even be
entered.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When splitting a repository, running `git rebase -i --root` to reword
the initial commit, Git dies with
BUG: sequencer.c:795: root commit without message.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In this developer's earlier attempt to accelerate interactive rebases by
converting large parts from Unix shell script into portable, performant
C, the --root handling was specifically excluded (to simplify the task a
little bit; it still took over a year to get that reduced set of patches
into Git proper).
This patch ties up that loose end: now only --preserve-merges uses the
slow Unix shell script implementation to perform the interactive rebase.
As the rebase--helper reports progress to stderr (unlike the scripted
interactive rebase, which reports it to stdout, of all places), we have
to adjust a couple of tests that did not expect that for `git rebase -i
--root`.
This patch fixes -- at long last! -- the really old bug reported in
6a6bc5bdc4d (add tests for rebasing root, 2013-06-06) that rebasing with
--root *always* rewrote the root commit, even if there were no changes.
The bug still persists in --preserve-merges mode, of course, but that
mode will be deprecated as soon as the new --rebase-merges mode
stabilizes, anyway.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Test cleanup.
* ps/test-chmtime-get:
t/helper: 'test-chmtime (--get|-g)' to print only the mtime
|
|
Small test-helper programs have been consolidated into a single
binary.
* nd/combined-test-helper: (36 commits)
t/helper: merge test-write-cache into test-tool
t/helper: merge test-wildmatch into test-tool
t/helper: merge test-urlmatch-normalization into test-tool
t/helper: merge test-subprocess into test-tool
t/helper: merge test-submodule-config into test-tool
t/helper: merge test-string-list into test-tool
t/helper: merge test-strcmp-offset into test-tool
t/helper: merge test-sigchain into test-tool
t/helper: merge test-sha1-array into test-tool
t/helper: merge test-scrap-cache-tree into test-tool
t/helper: merge test-run-command into test-tool
t/helper: merge test-revision-walking into test-tool
t/helper: merge test-regex into test-tool
t/helper: merge test-ref-store into test-tool
t/helper: merge test-read-cache into test-tool
t/helper: merge test-prio-queue into test-tool
t/helper: merge test-path-utils into test-tool
t/helper: merge test-online-cpus into test-tool
t/helper: merge test-mktemp into test-tool
t/helper: merge (unused) test-mergesort into test-tool
...
|
|
"git tag --contains no-such-commit" gave a full list of options
after giving an error message.
* ps/contains-id-error-message:
parse-options: do not show usage upon invalid option value
|
|
Compared to 'test-chmtime -v +0 file' which prints the mtime and
and the file name, 'test-chmtime --get file' displays only the mtime.
If it is used in combination with (+|=|=+|=-|-)seconds, it changes
and prints the new value.
test-chmtime -v +0 file | sed 's/[^0-9].*$//'
is now equivalent to:
test-chmtime --get file
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Usually, the usage should be shown only if the user does not know what
options are available. If the user specifies an invalid value, the user
is already aware of the available options. In this case, there is no
point in displaying the usage anymore.
This patch applies to "git tag --contains", "git branch --contains",
"git branch --points-at", "git for-each-ref --contains" and many more.
Signed-off-by: Paul-Sebastian Ungureanu <ungureanupaulsebastian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The new "--show-current-patch" option gives an end-user facing way
to get the diff being applied when "git rebase" (and "git am")
stops with a conflict.
* nd/rebase-show-current-patch:
rebase: introduce and use pseudo-ref REBASE_HEAD
rebase: add --show-current-patch
am: add --show-current-patch
|
|
The sequencer infrastructure is shared across "git cherry-pick",
"git rebase -i", etc., and has always spawned "git commit" when it
needs to create a commit. It has been taught to do so internally,
when able, by reusing the codepath "git commit" itself uses, which
gives performance boost for a few tens of percents in some sample
scenarios.
* pw/sequencer-in-process-commit:
sequencer: run 'prepare-commit-msg' hook
t7505: add tests for cherry-pick and rebase -i/-p
t7505: style fixes
sequencer: assign only free()able strings to gpg_sign
sequencer: improve config handling
t3512/t3513: remove KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT=1
sequencer: try to commit without forking 'git commit'
sequencer: load commit related config
sequencer: simplify adding Signed-off-by: trailer
commit: move print_commit_summary() to libgit
commit: move post-rewrite code to libgit
Add a function to update HEAD after creating a commit
commit: move empty message checks to libgit
t3404: check intermediate squash messages
|
|
The new command `git rebase --show-current-patch` is useful for seeing
the commit related to the current rebase state. Some however may find
the "git show" command behind it too limiting. You may want to
increase context lines, do a diff that ignores whitespaces...
For these advanced use cases, the user can execute any command they
want with the new pseudo ref REBASE_HEAD.
This also helps show where the stopped commit is from, which is hard
to see from the previous patch which implements --show-current-patch.
Helped-by: Tim Landscheidt <tim@tim-landscheidt.de>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
It is useful to see the full patch while resolving conflicts in a
rebase. The only way to do it now is
less .git/rebase-*/patch
which could turn out to be a lot longer to type if you are in a
linked worktree, or not at top-dir. On top of that, an ordinary user
should not need to peek into .git directory. The new option is
provided to examine the patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The gpg_sign member of the replay_opts structure is of type `char *`,
meaning that the sequencer deems the string to which gpg_sign points to
be under its custody, i.e. it needs to be free()d by the sequencer.
Therefore, let's only assign malloc()ed buffers to it.
Reported-by: Kaartic Sivaraam <kaartic.sivaraam@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Make sure the todo list ends up using single-letter command
abbreviations when the rebase.abbreviateCommands is enabled.
This configuration option should not change anything else.
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When there is more than one squash/fixup command in a row check the
intermediate messages are correct.
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A recent regression in "git rebase -i" that broke execution of git
commands from subdirectories via "exec" insn has been fixed.
* jk/rebase-i-exec-gitdir-fix:
sequencer: pass absolute GIT_DIR to exec commands
|
|
When we replaced the old shell script based interactive rebase in
commmit 18633e1a22a6 ("rebase -i: use the rebase--helper builtin",
2017-02-09) we introduced a regression of functionality in that the
GIT_DIR would be sent to the environment of the exec command as-is.
This generally meant that it would be passed as "GIT_DIR=.git", which
causes problems for any exec command that wants to run git commands in
a subdirectory.
This isn't a very large regression, since it is not that likely that the
exec command will run a git command, and even less likely that it will
need to do so in a subdir. This regression was discovered by a build
system which uses git-describe to find the current version of the build
system, and happened to do so from the src/ sub directory of the
project.
Fix this by passing in the absolute path of the git directory into the
child environment.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These tests were a bit anal about the *exact* warning/error message
printed by git rebase. But those messages are intended for the *end
user*, therefore it does not make sense to test so rigidly for the
*exact* wording.
In the following, we will reimplement the missing commits check in
the sequencer, with slightly different words.
So let's just test for the parts in the warning/error message that
we *really* care about, nothing more, nothing less.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix a recent regression to "git rebase -i" and add tests that would
have caught it and others.
* pw/rebase-i-regression-fix-tests:
t3420: fix under GETTEXT_POISON build
rebase: add more regression tests for console output
rebase: add regression tests for console output
rebase -i: add test for reflog message
sequencer: print autostash messages to stderr
|
|
Check that the reflog message written to the branch reflog when the
rebase is completed is correct
Signed-off-by: Phillip Wood <phillip.wood@dunelm.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The GETTEXT_POISON=YesPlease compile-time testing option added in my
bb946bba76 ("i18n: add GETTEXT_POISON to simulate unfriendly
translator", 2011-02-22) has been slowly bitrotting as strings have
been marked for translation, and new tests have been added without
running it.
I brought this up on the list ("[BUG] test suite broken with
GETTEXT_POISON=YesPlease", [1]) asking whether this mode was useful at
all anymore. At least one person occasionally uses it, and Lars
Schneider offered to change one of the the Travis builds to run in
this mode, so fix up the failing ones.
My test setup runs most of the tests, with the notable exception of
skipping all the p4 tests, so it's possible that there's still some
lurking regressions I haven't fixed.
1. <CACBZZX62+acvi1dpkknadTL827mtCm_QesGSZ=6+UnyeMpg8+Q@mail.gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Now that the sequencer learned to process a "normal" interactive rebase,
we use it. The original shell script is still used for "non-normal"
interactive rebases, i.e. when --root or --preserve-merges was passed.
Please note that the --root option (via the $squash_onto variable) needs
special handling only for the very first command, hence it is still okay
to use the helper upon continue/skip.
Also please note that the --no-ff setting is volatile, i.e. when the
interactive rebase is interrupted at any stage, there is no record of
it. Therefore, we have to pass it from the shell script to the
rebase--helper.
Note: the test t3404 had to be adjusted because the the error messages
produced by the sequencer comply with our current convention to start with
a lower-case letter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Rather than abusing a strbuf to come up with an environment block,
let's just use the argv_array structure which serves the same
purpose much better.
While at it, rename the function to reflect the fact that it does
not really care exactly what environment variables are defined in
said file.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -i" did not work well with core.commentchar
configuration variable for two reasons, both of which have been
fixed.
* js/rebase-i-commentchar-fix:
rebase -i: handle core.commentChar=auto
stripspace: respect repository config
rebase -i: highlight problems with core.commentchar
|
|
When 84c9dc2 (commit: allow core.commentChar=auto for character auto
selection, 2014-05-17) extended the core.commentChar functionality to
allow for the value 'auto', it forgot that rebase -i was already taught to
handle core.commentChar, and in turn forgot to let rebase -i handle that
new value gracefully.
Reported by Taufiq Hoven.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The interactive rebase does not currently play well with
core.commentchar. Let's add some tests to highlight those problems
that will be fixed in the remainder of the series.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If we found bad instruction lines in the instruction sheet
of interactive rebase, we give the user advice on how to
fix it. However, we don't tell the user what to do afterwards.
Give the user advice to run 'git rebase --continue' after
the fix.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The concerned test greps the output of exit_with_patch() in
git-rebase--interactive.sh script.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A few tests that specifically target "git rebase -i" have been
added.
* js/rebase-i-tests:
rebase -i: we allow extra spaces after fixup!/squash!
rebase -i: demonstrate a bug with --autosquash
t3404: add a test for the --gpg-sign option
|
|
Grammofix.
* js/t3404-grammo-fix:
t3404: fix a grammo (commands are ran -> commands are run)
|
|
For the upcoming rebase--helper work (which will accelerate the
interactive rebase noticably), it is important to verify that the
--gpg-sign option is handled properly.
Please note that this patch does this on the cheap, by verifying that
the expected option is printed in the message of the 'edit' operation.
We really should test that the interactive rebase signs the commits
properly, iff GPG is available. This test is left for later.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use functions test_i18ncmp and test_i18ngrep to successfully pass tests
running under GETTEXT_POISON.
The output strings compared to in these test were marked for translation
in ed47fdf ("i18n: unpack-trees: mark strings for translation",
2016-04-09) and later improved in 2e3926b ("i18n: unpack-trees: avoid
substituting only a verb in sentences", 2016-05-12).
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Use pipe to send gettext output to git stripspace instead of the
original method of using shell here-document, because command
substitution '$(...)' would not take place inside the here-documents.
The exception is the case of the last here-document redirecting to cat,
in which commands substitution works and, thus, is preserved in this
commit.
t3404: adapt test to the strings newly marked for translation
Test t3404-rebase-interactive.sh would fail under GETTEXT_POISON unless
using test_i18ngrep.
Add eval_ngettext fallback functions to be called when running, for
instance, under GETTEXT_POISON. Otherwise, tests would fail under
GETTEXT_POISON, or other build that doesn't support the GNU gettext,
because that function could not be found.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code clean-up.
* jk/use-write-script-more:
t3404: use write_script
t1020: do not overuse printf and use write_script
t5532: use write_script
|
|
The test uses hardcoded #!/bin/sh to create a pre-commit hook
script. Because the generated script uses $(command substitution),
which is not supported by /bin/sh on some platforms (e.g. Solaris),
the resulting pre-commit always fails.
Which is not noticeable as the test that uses the hook is about
checking the behaviour of the command when the hook fails ;-), but
nevertheless it is not testing what we wanted to test.
Use write_script so that the resulting script is run under the same
shell our scripted Porcelain commands are run, which must support
the necessary $(construct).
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In the later steps of preparing a patch series I do not want to
edit or reorder the patches any more, but just make sure the
test suite passes after each patch and also to fix breakage
right there if some of the steps fail. I could run
EDITOR=true git rebase -i <anchor> -x "make test"
but it would be simpler if it can be spelled like so:
git rebase <anchor> -x "make test"
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
If the user explicitly specified a merge strategy or strategy
options, continue to use that strategy/option after
"rebase --continue". Add a test of the corrected behavior.
If --merge is specified or implied by -s or -X, then "strategy and
"strategy_opts" are set to values from which "strategy_args" can be
derived; otherwise they are set to empty strings. Either way,
their values are propagated from one step of an interactive rebase
to the next via state files.
"do_merge", on the other hand, is *not* propagated to later steps of
an interactive rebase. Therefore, making the initialization of
"strategy_args" conditional on "do_merge" being set prevents later
steps of an interactive rebase from setting it correctly.
Luckily, we don't need the "do_merge" guard at all. If the rebase
was started without --merge, then "strategy" and "strategy_opts"
are both the empty string, which results in "strategy_args" also
being set to the empty string, which is just what we want in that
situation. So remove the "do_merge" guard and derive
"strategy_args" from "strategy" and "strategy_opts" every time.
Reported-by: Diogo de Campos <campos@esss.com.br>
Signed-off-by: Fabian Ruch <bafain@gmail.com>
Helped-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* cb/t3404-shellquote:
t3404: fix quoting of redirect for some versions of bash
|
|
As CodingGuidelines says, some versions of bash errors out when
$variable substitution is used as the target for redirection without
being quoted (even though POSIX may not require such a quote).
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recent update to "rebase -i" that tries to sanity check the edited
insn sheet before it uses it has become too picky on Windows where
CRLF left by the editor is turned into a trailing CR on the line
read via the "read" built-in command.
* gr/rebase-i-drop-warn:
rebase-i: work around Windows CRLF line endings
t3404: "rebase -i" gets broken when insn sheet uses CR/LF line endings
|
|
Editors on Windows can and do save text files with CRLF line
endings, which is the convention on the platform. We are seeing
reports that the "read" command in a port of bash to the environment
however does not strip the CRLF at the end, not adjusting for the
same convention on the platform.
This breaks the recently added sanity checks for the insn sheet fed
to "rebase -i"; instead of an empty line (hence nothing in $command),
the script was getting a lone CR in there.
Special case a lone CR and treat it the same way as an empty line to
work this around.
This patch (also) passes the test with Git for Windows, where the
issue was seen first.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Based on a bug report by Chad Boles.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -i" had a minor regression recently, which stopped
considering a line that begins with an indented '#' in its insn
sheet not a comment, which is now fixed.
* gr/rebase-i-drop-warn:
rebase-i: loosen over-eager check_bad_cmd check
rebase-i: explicitly accept tab as separator in commands
|
|
804098bb (git rebase -i: add static check for commands and SHA-1,
2015-06-29) tried to check all insns before running any in the todo
list, but it did so by implementing its own parser that is a lot
stricter than necessary. We used to allow lines that are indented
(including comment lines), and we used to allow a whitespace between
the insn and the commit object name to be HT, among other things,
that are flagged as an invalid line by mistake.
Fix this by using the same tokenizer that is used to parse the todo
list file in the new check.
Whether it's a good thing to accept indented comments is
debatable (other commands like "git commit" do not accept them), but we
already accepted them in the past, and some people and scripts rely on
this behavior. Also, a line starting with space followed by a '#' cannot
have any meaning other than being a comment, hence it doesn't harm to
accept them as comments.
Largely based on patch by: Junio C Hamano <gitster@pobox.com>
[jc: updated test with quickfix from Torsten Bögershausen]
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Tests that assume how reflogs are represented on the filesystem too
much have been corrected.
* dt/reflog-tests:
tests: remove some direct access to .git/logs
t/t7509: remove unnecessary manipulation of reflog
|
|
Add "drop commit-object-name subject" command as another way to
skip replaying of a commit in "rebase -i", and then punish those
who do not use it (and instead just remove the lines) by throwing
a warning.
* gr/rebase-i-drop-warn:
git rebase -i: add static check for commands and SHA-1
git rebase -i: warn about removed commits
git-rebase -i: add command "drop" to remove a commit
|
|
Alternate refs backends might store reflogs somewhere other than
.git/logs. Change most test code that directly accesses .git/logs to
instead use git reflog commands.
There are still a few tests which need direct access to reflogs: to
check reflog permissions, to manually create reflogs from scratch, to
save/restore reflogs, to check the format of raw reflog data, and to
remove not just reflog contents, but the reflogs themselves. All cases
which don't need direct access have been modified.
Signed-off-by: David Turner <dturner@twopensource.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Abandoning an already applied change in "git rebase -i" with
"--continue" left CHERRY_PICK_HEAD and confused later steps.
* js/rebase-i-clean-up-upon-continue-to-skip:
rebase -i: do not leave a CHERRY_PICK_HEAD file behind
t3404: demonstrate CHERRY_PICK_HEAD bug
|
|
Check before the start of the rebasing if the commands exists, and for
the commands expecting a SHA-1, check if the SHA-1 is present and
corresponds to a commit. In case of error, print the error, stop git
rebase and prompt the user to fix with 'git rebase --edit-todo' or to
abort.
This allows to avoid doing half of a rebase before finding an error
and giving back what's left of the todo list to the user and prompt
him to fix when it might be too late for him to do so (he might have
to abort and restart the rebase).
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Check if commits were removed (i.e. a line was deleted) and print
warnings or stop git rebase depending on the value of the
configuration variable rebase.missingCommitsCheck.
This patch gives the user the possibility to avoid silent loss of
information (losing a commit through deleting the line in this case)
if he wants.
Add the configuration variable rebase.missingCommitsCheck.
- When unset or set to "ignore", no checking is done.
- When set to "warn", the commits are checked, warnings are
displayed but git rebase still proceeds.
- When set to "error", the commits are checked, warnings are
displayed and the rebase is stopped.
(The user can then use 'git rebase --edit-todo' and
'git rebase --continue', or 'git rebase --abort')
rebase.missingCommitsCheck defaults to "ignore".
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of removing a line to remove the commit, you can use the
command "drop" (just like "pick" or "edit"). It has the same effect as
deleting the line (removing the commit) except that you keep a visual
trace of your actions, allowing a better control and reducing the
possibility of removing a commit by mistake.
Signed-off-by: Galan Rémi <remi.galan-alfonso@ensimag.grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When skipping commits whose changes were already applied via `git rebase
--continue`, we need to clean up said file explicitly.
The same is not true for `git rebase --skip` because that will execute
`git reset --hard` as part of the "skip" handling in git-rebase.sh, even
before git-rebase--interactive.sh is called.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When rev-list's --cherry option does not detect that a patch has already
been applied upstream, an interactive rebase would offer to reapply it and
consequently stop at that patch with a failure, mentioning that the diff
is empty.
Traditionally, a `git rebase --continue` simply skips the commit in such a
situation.
However, as pointed out by Gábor Szeder, this leaves a CHERRY_PICK_HEAD
behind, making the Git prompt believe that a cherry pick is still going
on. This commit adds a test case demonstrating this bug.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -i" moved the "current" command from "todo" to "done" a
bit too prematurely, losing a step when a "pick" did not even start.
* ph/rebase-i-redo:
rebase -i: redo tasks that die during cherry-pick
|
|
"git rebase -i" moved the "current" command from "todo" to "done" a
bit too prematurely, losing a step when a "pick" did not even start.
* ph/rebase-i-redo:
rebase -i: redo tasks that die during cherry-pick
|
|
When rebase--interactive processes a task, it removes the item from
the todo list and appends it to another list of executed tasks. If a
pick (this includes squash and fixup) fails before the index has
recorded the changes, take the corresponding item and put it on the todo
list again. Otherwise, the changes introduced by the scheduled commit
would be lost.
That kind of decision is possible since the cherry-pick command
signals why it failed to apply the changes of the given commit. Either
the changes are recorded in the index using a conflict (return value 1)
and rebase does not continue until they are resolved or the changes
are not recorded in the index (return value neither 0 nor 1) and
rebase has to try again with the same task.
Add a test cases for regression testing to the "rebase-interactive"
test suite.
Signed-off-by: Fabian Ruch <bafain@gmail.com>
Signed-off-by: Phil Hord <hordp@cisco.com>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -i" recently started to include the number of
commits in the insn sheet to be processed, but on a platform
that prepends leading whitespaces to "wc -l" output, the numbers
are shown with extra whitespaces that aren't necessary.
* es/rebase-i-count-todo:
rebase-interactive: re-word "item count" comment
rebase-interactive: suppress whitespace preceding item count
|
|
These are tests which are missing a link in their &&-chain,
but during a setup phase. We may fail to notice failure in
commands that build the test environment, but these are
typically not expected to fail at all (but it's still good
to double-check that our test environment is what we
expect).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
These are tests which are missing a link in their &&-chain,
but in a way that probably does not effect the outcome of
the test. Most of these are of the form:
some_cmd >actual
test_cmp expect actual
The main point of the test is to verify the output, and a
failure in some_cmd would probably be noticed by bogus
output. But it is good for the tests to also confirm that
"some_cmd" does not die unexpectedly after producing its
output.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git rebase -i" recently started to include the number of
commits in the insn sheet to be processed, but on a platform
that prepends leading whitespaces to "wc -l" output, the numbers
are shown with extra whitespaces that aren't necessary.
* es/rebase-i-count-todo:
rebase-interactive: re-word "item count" comment
rebase-interactive: suppress whitespace preceding item count
|
|
97f05f43 (Show number of TODO items for interactive rebase, 2014-12-10)
taught rebase-interactive to compute an item count with 'wc -l' and
display it in the instruction list comments:
# Rebase 46640c6..5568fd5 onto 46640c6 (4 TODO item(s))
On Mac OS X, however, it renders as:
# Rebase 46640c6..5568fd5 onto 46640c6 ( 4 TODO item(s))
since 'wc -l' indents its output with leading spaces. Fix this.
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In earlier days, the abbreviated commit object name shown to the end
users were generated with hardcoded --abbrev=7; 56895038 (rebase
-i: respect core.abbrev, 2013-09-28) tried to make it honor the user
specified core.abbrev, but it missed the very initial invocation of
the editor.
These days, we try to use the full 40-hex object names internally to
avoid ambiguity that can arise after rebase starts running. Newly
created objects during the rebase may share the same prefix with
existing commits listed in the insn sheet. These object names are
shortened just before invoking the sequence editor to present the
insn sheet to the end user, and then expanded back to full object
names when the editor returns.
But the code still used the shortened names when preparing the insn
sheet for the very first time, resulting "7 hexdigits or more"
output to the user. Change the code to use full 40-hex commit
object names from the very beginning to make things more uniform.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* mt/rebase-i-keep-empty-test:
rebase --keep-empty -i: add test
|
|
There's some special code in rebase -i to deal
with --keep-empty.
Add test for this combination.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Ordinarily, we would say "VAR=VAL command" to execute a tested
command with environment variable(s) set only for that command.
This however does not work if 'command' is a shell function (most
notably 'test_must_fail'); the result of the assignment is retained
and affects later commands.
To avoid this, we used to assign and export environment variables
and run such a test in a subshell, like so:
(
VAR=VAL && export VAR &&
test_must_fail git command to be tested
)
But with "env" utility, we should be able to say:
test_must_fail env VAR=VAL git command to be tested
which is much shorter and easier to read.
Signed-off-by: David Tran <unsignedzero@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit object names in the insn sheet that was prepared at the
beginning of "rebase -i" session can become ambiguous as the
rebasing progresses and the repository gains more commits. Make
sure the internal record is kept with full 40-hex object names.
* es/rebase-i-no-abbrev:
rebase -i: fix short SHA-1 collision
t3404: rebase -i: demonstrate short SHA-1 collision
t3404: make tests more self-contained
|
|
The 'todo' sheet for interactive rebase shows abbreviated SHA-1's and
then performs its operations upon those shortened values. This can lead
to an abort if the SHA-1 of a reworded or edited commit is no longer
unique within the abbreviated SHA-1 space and a subsequent SHA-1 in the
todo list has the same abbreviated value.
For example:
edit f00dfad first
pick badbeef second
If, after editing, the new SHA-1 of "first" also has prefix badbeef,
then the subsequent 'pick badbeef second' will fail since badbeef is no
longer a unique SHA-1 abbreviation:
error: short SHA1 badbeef is ambiguous.
fatal: Needed a single revision
Invalid commit name: badbeef
Fix this problem by expanding the SHA-1's in the todo list before
performing the operations.
[es: also collapse & expand SHA-1's for --edit-todo; respect
core.commentchar in transform_todo_ids(); compose commit message]
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
