| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When users want to enable the latest and greatest configuration options
recommended by Scalar after a Git upgrade, 'scalar reconfigure --all' is
a great option that iterates over all repos in the multi-valued
'scalar.repos' config key.
However, this feature previously forced users to enable background
maintenance. In some environments this is not preferred.
Add a new --maintenance=<mode> option to 'scalar reconfigure' that
provides options for enabling (default), disabling, or leaving
background maintenance config as-is.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When registering a repository with Scalar to get the latest opinionated
configuration, the 'scalar register' command will also set up background
maintenance. This is a recommended feature for most user scenarios.
However, this is not always recommended in some scenarios where
background modifications may interfere with foreground activities.
Specifically, setting up a clone for use in automation may require doing
certain maintenance steps in the foreground that could become blocked by
concurrent background maintenance operations.
Allow the user to specify --no-maintenance to 'scalar register'. This
requires updating the method prototype for register_dir(), so use the
default of enabling this value when otherwise specified.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When cloning a repository remote/HEAD is created, but when the user
creates a repository with git init, and later adds a remote, remote/HEAD
is only created if the user explicitly runs a variant of "remote
set-head". Attempt to set remote/HEAD during fetch, if the user does not
have it already set. Silently ignore any errors.
Signed-off-by: Bence Ferdinandy <bence@ferdinandy.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Background tasks "git maintenance" runs may need to use credential
information when going over the network, but a credential helper
may work only in an interactive environment, and end up blocking a
scheduled task waiting for UI. Credential helpers can now behave
differently when they are not running interactively.
* ds/background-maintenance-with-credential:
scalar: configure maintenance during 'reconfigure'
maintenance: add custom config to background jobs
credential: add new interactive config option
|
|
The 'scalar reconfigure' command is intended to update registered repos
with the latest settings available. However, up to now we were not
reregistering the repos with background maintenance.
In particular, this meant that the background maintenance schedule would
not be updated if there are improvements between versions.
Be sure to register repos for maintenance during the reconfigure step.
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some large repositories use tags to track a huge list of release
versions. While this choice is costly on the ref advertisement, it is
further wasteful for clients who do not need those tags. Allow clients
to optionally skip the tag advertisement.
This behavior is similar to that of 'git clone --no-tags' implemented in
0dab2468ee5 (clone: add a --no-tags option to clone without tags,
2017-04-26), including the modification of the remote.origin.tagOpt
config value to include "--no-tags".
One thing that is opposite of the 'git clone' implementation is that
this allows '--tags' as an assumed option, which can be naturally negated
with '--no-tags'. The clone command does not accept '--tags' but allows
"--no-no-tags" as the negation of its '--no-tags' option.
While testing this option, combine the test with the previously untested
'--no-src' option introduced in 4527db8ff8c (scalar: add --[no-]src
option, 2023-08-28).
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
During the latest v2.45.0 update, 'scalar reconfigure --all' started to
segfault on my machine. Breaking it down via the debugger, it was
faulting on a NULL reference to the_hash_algo, which is a macro pointing
to the_repository->hash_algo.
In my case, this is due to one of my repositories having a detached HEAD,
which requires get_oid_hex() to parse that the HEAD reference is valid.
Another way to cause a failure is to use the "includeIf.onbranch" config
key, which will lead to a BUG() statement.
My first inclination was to try to refactor cmd_reconfigure() to execute
'git for-each-repo' instead of this loop. In addition to the difficulty
of executing 'scalar reconfigure' within 'git for-each-repo', it would
be difficult to perform the clean-up logic for non-existent repos if we
relied on that child process.
Instead, I chose to move the temporary repo to be within the loop and
reinstate the_repository to its old value after we are done performing
logic on the current array item.
Add tests to t9210-scalar.sh to test 'scalar reconfigure --all' with
multiple registered repos. There are two different ways that the old
use of the_repository could trigger bugs. These issues are being solved
independently to be more careful about the_repository being
uninitialized, but the change in this patch around the use of
the_repository is still a good safety precaution.
Co-authored-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With "rev-list --missing=print $start", where "$start" is a 40-hex
object name, the object may or may not be lazily fetched from the
promisor. Make sure it fails by forcing dereference of "$start"
at that point.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A user reported issues with 'scalar clone' and 'scalar register' when
working in an environment that had locked down the ability to run
'crontab' or 'systemctl' in that those commands registered as _failures_
instead of opportunistically reporting a success with just a warning
about background maintenance.
As a workaround, they can use GIT_TEST_MAINT_SCHEDULER to fake a
successful background maintenance, but this is not a viable strategy for
long-term.
Update 'scalar register' and 'scalar clone' to no longer fail by
modifying register_dir() to only warn when toggle_maintenance(1) fails.
Since background maintenance is a "nice to have" and not a requirement
for a working repository, it is best to move this from hard error to
gentle warning.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
A user recently reported issues with 'scalar register' and 'scalar
clone' in that they failed when the system had permissions locked down
so both 'crontab' and 'systemctl' commands failed when trying to enable
background maintenance.
This hard error is undesirable, but let's create tests that demonstrate
this behavior before modiying the behavior. We can use
GIT_TEST_MAINT_SCHEDULER to guarantee failure and check the exit code
and error message.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
As pointed out by Stolee, the previous incarnation of this test case was
not stringent enough: we want to verify that _only_ the stale entries
are removed (previously, the test case would have succeeded even if all
entries had been removed).
Let's rectify this and verify that the other entries are left intact.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Every once in a while, a Git for Windows installation fails because the
attempt to reconfigure a Scalar enlistment failed because it was deleted
manually without removing the corresponding entries in the global Git
config.
In f5f0842d0b5 (scalar: let 'unregister' handle a deleted enlistment
directory gracefully, 2021-12-03), we already taught `scalar delete` to
handle the case of a manually deleted enlistment gracefully. This patch
adds the same graceful handling to `scalar reconfigure --all`.
This patch is best viewed with `--color-moved`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
The 'scalar unregister' command removes a repository from the list of
registered Scalar repositories and removes it from the list of
repositories registered for background maintenance. If the repository
was not already registered for background maintenance, then the command
fails, even if the repository was still registered as a Scalar
repository.
After using 'scalar clone' or 'scalar register', the repository would be
enrolled in background maintenance since those commands run 'git
maintenance start'. If the user runs 'git maintenance unregister' on
that repository, then it is still in the list of repositories which get
new config updates from 'scalar reconfigure'. The 'scalar unregister'
command would fail since 'git maintenance unregister' would fail.
Further, the add_or_remove_enlistment() method in scalar.c already has
this idempotent nature built in as an expectation since it returns zero
when the scalar.repo list already has the proper containment of the
repository.
The previous change added the 'git maintenance unregister --force'
option, so use it within 'scalar unregister' to make it idempotent.
Signed-off-by: Derrick Stolee <derrickstolee@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Move 'scalar' out of 'contrib/' and into the root of the Git tree. The goal
of this change is to build 'scalar' as part of the standard Git build &
install processes.
This patch includes both the physical move of Scalar's files out of
'contrib/' ('scalar.c', 'scalar.txt', and 't9xxx-scalar.sh'), and the
changes to the build definitions in 'Makefile' and 'CMakelists.txt' to
accommodate the new program.
At a high level, Scalar is built so that:
- there is a 'scalar-objs' target (similar to those created in 029bac01a8
(Makefile: add {program,xdiff,test,git,fuzz}-objs & objects targets,
2021-02-23)) for debugging purposes.
- it appears in the root of the install directory (rather than the
gitexecdir).
- it is included in the 'bin-wrappers/' directory for use in tests.
- it receives a platform-specific executable suffix (e.g., '.exe'), if
applicable.
- 'scalar.txt' is installed as 'man1' documentation.
- the 'clean' target removes the 'scalar' executable.
Additionally, update the root level '.gitignore' file to ignore the Scalar
executable.
Signed-off-by: Victoria Dye <vdye@github.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
