diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2025-10-04 16:07:08 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2025-10-04 16:07:08 -0700 |
| commit | c6006b8ca14dcc604567be99fc4863e6e11ab6e3 (patch) | |
| tree | b768136932f3c40765f754ed086c488b81c9ab73 /Documentation | |
| parent | 5d2f4730bb7550d64c87785f1035d0e641dbc979 (diff) | |
| parent | e40b984b6c4ce3f80814f39f86f87b2a48f2e662 (diff) | |
| download | linux-c6006b8ca14dcc604567be99fc4863e6e11ab6e3.tar.gz | |
Merge tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It
was another normal development cycle, with lots of the usual drivers
getting updates:
- Thunderbolt driver cleanups and additions
- dwc3 driver updates
- dwc2 driver updates
- typec driver updates
- xhci driver updates and additions
- offload USB engine updates for better power management
- unused tracepoint removals
- usb gadget fixes and updates as more users start to rely on these
drivers instead of the "old" function gadget drivers
- new USB device ids
- other minor driver USB driver updates
- new USB I/O driver framework and driver additions"
The last item, the usb i/o driver, has an i2c and gpio driver added
through this tree. Those drivers were acked by the respective
subsystem maintainers.
All of these have been in linux-next for a while"
* tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits)
usb: vhci-hcd: Prevent suspending virtually attached devices
USB: serial: option: add SIMCom 8230C compositions
thunderbolt: Fix use-after-free in tb_dp_dprx_work
usb: xhci: align PORTSC trace with one-based port numbering
usb: xhci: correct indentation for PORTSC tracing function
usb: xhci: improve TR Dequeue Pointer mask
usb: xhci-pci: add support for hosts with zero USB3 ports
usb: xhci: Update a comment about Stop Endpoint retries
Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"
usb: gadget: f_rndis: Refactor bind path to use __free()
usb: gadget: f_ecm: Refactor bind path to use __free()
usb: gadget: f_acm: Refactor bind path to use __free()
usb: gadget: f_ncm: Refactor bind path to use __free()
usb: gadget: Introduce free_usb_request helper
usb: gadget: Store endpoint pointer in usb_request
usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
usb: host: xhci-rcar: Move R-Car reg definitions
dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
...
Diffstat (limited to 'Documentation')
10 files changed, 402 insertions, 92 deletions
diff --git a/Documentation/devicetree/bindings/usb/intel,ixp4xx-udc.yaml b/Documentation/devicetree/bindings/usb/intel,ixp4xx-udc.yaml new file mode 100644 index 00000000000000..4ed60274689725 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/intel,ixp4xx-udc.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/intel,ixp4xx-udc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel IXP4xx SoC USB Device Controller (UDC) + +description: The IXP4xx SoCs has a full-speed USB Device + Controller with 16 endpoints and a built-in transceiver. + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +properties: + compatible: + const: intel,ixp4xx-udc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + usb@c800b000 { + compatible = "intel,ixp4xx-udc"; + reg = <0xc800b000 0x1000>; + interrupts = <12 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt deleted file mode 100644 index f60785f73d3d56..00000000000000 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt +++ /dev/null @@ -1,23 +0,0 @@ -Tegra SOC USB controllers - -The device node for a USB controller that is part of a Tegra -SOC is as described in the document "Open Firmware Recommended -Practice : Universal Serial Bus" with the following modifications -and additions : - -Required properties : - - compatible : For Tegra20, must contain "nvidia,tegra20-ehci". - For Tegra30, must contain "nvidia,tegra30-ehci". Otherwise, must contain - "nvidia,<chip>-ehci" plus at least one of the above, where <chip> is - tegra114, tegra124, tegra132, or tegra210. - - nvidia,phy : phandle of the PHY that the controller is connected to. - - clocks : Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. - - resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - - reset-names : Must include the following entries: - - usb - -Optional properties: - - nvidia,needs-double-reset : boolean is to be set for some of the Tegra20 - USB ports, which need reset twice due to hardware issues. diff --git a/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml b/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml new file mode 100644 index 00000000000000..98260f9fb44265 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/renesas,rzg3e-xhci.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/renesas,rzg3e-xhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G3E USB 3.2 Gen2 Host controller + +maintainers: + - Biju Das <biju.das.jz@bp.renesas.com> + +properties: + compatible: + const: renesas,r9a09g047-xhci + + reg: + maxItems: 1 + + interrupts: + items: + - description: Logical OR of all interrupt signals. + - description: System management interrupt + - description: Host system error interrupt + - description: Power management event interrupt + - description: xHC interrupt + + interrupt-names: + items: + - const: all + - const: smi + - const: hse + - const: pme + - const: xhc + + clocks: + maxItems: 1 + + phys: + maxItems: 2 + + phy-names: + items: + - const: usb2-phy + - const: usb3-phy + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - power-domains + - resets + - phys + - phy-names + +allOf: + - $ref: usb-xhci.yaml + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/renesas,r9a09g047-cpg.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + usb@15850000 { + compatible = "renesas,r9a09g047-xhci"; + reg = <0x15850000 0x10000>; + interrupts = <GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "all", "smi", "hse", "pme", "xhc"; + clocks = <&cpg CPG_MOD 0xaf>; + power-domains = <&cpg>; + resets = <&cpg 0xaa>; + phys = <&usb3_phy>, <&usb3_phy>; + phy-names = "usb2-phy", "usb3-phy"; + }; diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index a19816bbb1fd21..0b8b90dd195178 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -59,6 +59,12 @@ properties: - renesas,usbhs-r8a77995 # R-Car D3 - const: renesas,rcar-gen3-usbhs + - const: renesas,usbhs-r9a09g077 # RZ/T2H + + - items: + - const: renesas,usbhs-r9a09g087 # RZ/N2H + - const: renesas,usbhs-r9a09g077 # RZ/T2H + reg: maxItems: 1 @@ -141,9 +147,25 @@ allOf: required: - resets else: - properties: - interrupts: - maxItems: 1 + if: + properties: + compatible: + contains: + const: renesas,usbhs-r9a09g077 + then: + properties: + resets: false + clocks: + maxItems: 1 + interrupts: + items: + - description: USB function interrupt USB_FI + - description: USB function DMA0 transmit completion interrupt USB_FDMA0 + - description: USB function DMA1 transmit completion interrupt USB_FDMA1 + else: + properties: + interrupts: + maxItems: 1 additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/s3c2410-usb.txt b/Documentation/devicetree/bindings/usb/s3c2410-usb.txt deleted file mode 100644 index 26c85afd0b53b0..00000000000000 --- a/Documentation/devicetree/bindings/usb/s3c2410-usb.txt +++ /dev/null @@ -1,22 +0,0 @@ -Samsung S3C2410 and compatible SoC USB controller - -OHCI - -Required properties: - - compatible: should be "samsung,s3c2410-ohci" for USB host controller - - reg: address and length of the controller memory mapped region - - interrupts: interrupt number for the USB OHCI controller - - clocks: Should reference the bus and host clocks - - clock-names: Should contain two strings - "usb-bus-host" for the USB bus clock - "usb-host" for the USB host clock - -Example: - -usb0: ohci@49000000 { - compatible = "samsung,s3c2410-ohci"; - reg = <0x49000000 0x100>; - interrupts = <0 0 26 3>; - clocks = <&clocks UCLK>, <&clocks HCLK_USBH>; - clock-names = "usb-bus-host", "usb-host"; -}; diff --git a/Documentation/devicetree/bindings/usb/spacemit,k1-dwc3.yaml b/Documentation/devicetree/bindings/usb/spacemit,k1-dwc3.yaml new file mode 100644 index 00000000000000..0f0b5e061ca17c --- /dev/null +++ b/Documentation/devicetree/bindings/usb/spacemit,k1-dwc3.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/spacemit,k1-dwc3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SpacemiT K1 SuperSpeed DWC3 USB SoC Controller + +maintainers: + - Ze Huang <huang.ze@linux.dev> + +description: | + The SpacemiT K1 embeds a DWC3 USB IP Core which supports Host functions + for USB 3.0 and DRD for USB 2.0. + + Key features: + - USB3.0 SuperSpeed and USB2.0 High/Full/Low-Speed support + - Supports low-power modes (USB2.0 suspend, USB3.0 U1/U2/U3) + - Internal DMA controller and flexible endpoint FIFO sizing + + Communication Interface: + - Use of PIPE3 (125MHz) interface for USB3.0 PHY + - Use of UTMI+ (30/60MHz) interface for USB2.0 PHY + +allOf: + - $ref: snps,dwc3-common.yaml# + +properties: + compatible: + const: spacemit,k1-dwc3 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: usbdrd30 + + interrupts: + maxItems: 1 + + phys: + items: + - description: phandle to USB2/HS PHY + - description: phandle to USB3/SS PHY + + phy-names: + items: + - const: usb2-phy + - const: usb3-phy + + resets: + items: + - description: USB3.0 AHB reset + - description: USB3.0 VCC reset + - description: USB3.0 PHY reset + + reset-names: + items: + - const: ahb + - const: vcc + - const: phy + + reset-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 2 + description: delay after reset sequence [us] + + vbus-supply: + description: A phandle to the regulator supplying the VBUS voltage. + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - phys + - phy-names + - resets + - reset-names + +unevaluatedProperties: false + +examples: + - | + usb@c0a00000 { + compatible = "spacemit,k1-dwc3"; + reg = <0xc0a00000 0x10000>; + clocks = <&syscon_apmu 16>; + clock-names = "usbdrd30"; + interrupts = <125>; + phys = <&usb2phy>, <&usb3phy>; + phy-names = "usb2-phy", "usb3-phy"; + resets = <&syscon_apmu 8>, + <&syscon_apmu 9>, + <&syscon_apmu 10>; + reset-names = "ahb", "vcc", "phy"; + reset-delay = <2>; + vbus-supply = <&usb3_vbus>; + #address-cells = <1>; + #size-cells = <0>; + + hub_2_0: hub@1 { + compatible = "usb2109,2817"; + reg = <1>; + vdd-supply = <&usb3_vhub>; + peer-hub = <&hub_3_0>; + reset-gpios = <&gpio 3 28 1>; + }; + + hub_3_0: hub@2 { + compatible = "usb2109,817"; + reg = <2>; + vdd-supply = <&usb3_vhub>; + peer-hub = <&hub_2_0>; + reset-gpios = <&gpio 3 28 1>; + }; + }; diff --git a/Documentation/devicetree/bindings/usb/ti,twl4030-usb.yaml b/Documentation/devicetree/bindings/usb/ti,twl4030-usb.yaml new file mode 100644 index 00000000000000..6ef33750742598 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,twl4030-usb.yaml @@ -0,0 +1,74 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,twl4030-usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TWL4030 USB PHY and Comparator + +maintainers: + - Peter Ujfalusi <peter.ujfalusi@gmail.com> + +description: + Bindings for the USB PHY and comparator module found within the + TWL4030 family of companion chips. If a sibling node is compatible with + "ti,twl4030-bci", the driver for that node will query this device for + USB power status. + +properties: + compatible: + const: ti,twl4030-usb + + interrupts: + minItems: 1 + items: + - description: OTG interrupt number for ID events. + - description: USB interrupt number for VBUS events. + + usb1v5-supply: + description: Phandle to the vusb1v5 regulator. + + usb1v8-supply: + description: Phandle to the vusb1v8 regulator. + + usb3v1-supply: + description: Phandle to the vusb3v1 regulator. + + usb_mode: + description: | + The mode used by the PHY to connect to the controller: + 1: ULPI mode + 2: CEA2011_3PIN mode + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2] + + '#phy-cells': + const: 0 + +required: + - compatible + - interrupts + - usb1v5-supply + - usb1v8-supply + - usb3v1-supply + - usb_mode + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + usb-phy { + compatible = "ti,twl4030-usb"; + + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + + usb1v5-supply = <®_vusb1v5>; + usb1v8-supply = <®_vusb1v8>; + usb3v1-supply = <®_vusb3v1>; + usb_mode = <1>; + + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/usb/ti,twl6030-usb.yaml b/Documentation/devicetree/bindings/usb/ti,twl6030-usb.yaml new file mode 100644 index 00000000000000..33b6da50660aaa --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ti,twl6030-usb.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/ti,twl6030-usb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TWL6030 USB Comparator + +maintainers: + - Peter Ujfalusi <peter.ujfalusi@gmail.com> + +description: + Bindings for the USB comparator module found within the TWL6030 + family of companion chips. + +properties: + compatible: + const: ti,twl6030-usb + + interrupts: + items: + - description: OTG for ID events in host mode + - description: USB device mode for VBUS events + + usb-supply: + description: + Phandle to the VUSB regulator. For TWL6030, this should be the 'vusb' + regulator. For TWL6032 subclass, it should be the 'ldousb' regulator. + +required: + - compatible + - interrupts + - usb-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + usb { + compatible = "ti,twl6030-usb"; + + interrupts = <4 IRQ_TYPE_LEVEL_HIGH>, <10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + + usb-supply = <®_vusb>; + }; diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt deleted file mode 100644 index 17327a296110a4..00000000000000 --- a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt +++ /dev/null @@ -1,43 +0,0 @@ -USB COMPARATOR OF TWL CHIPS - -TWL6030 USB COMPARATOR - - compatible : Should be "ti,twl6030-usb" - - interrupts : Two interrupt numbers to the cpu should be specified. First - interrupt number is the otg interrupt number that raises ID interrupts when - the controller has to act as host and the second interrupt number is the - usb interrupt number that raises VBUS interrupts when the controller has to - act as device - - usb-supply : phandle to the regulator device tree node. It should be vusb - if it is twl6030 or ldousb if it is twl6032 subclass. - -twl6030-usb { - compatible = "ti,twl6030-usb"; - interrupts = < 4 10 >; -}; - -Board specific device node entry -&twl6030-usb { - usb-supply = <&vusb>; -}; - -TWL4030 USB PHY AND COMPARATOR - - compatible : Should be "ti,twl4030-usb" - - interrupts : The interrupt numbers to the cpu should be specified. First - interrupt number is the otg interrupt number that raises ID interrupts - and VBUS interrupts. The second interrupt number is optional. - - <supply-name>-supply : phandle to the regulator device tree node. - <supply-name> should be vusb1v5, vusb1v8 and vusb3v1 - - usb_mode : The mode used by the phy to connect to the controller. "1" - specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode. - -If a sibling node is compatible "ti,twl4030-bci", then it will find -this device and query it for USB power status. - -twl4030-usb { - compatible = "ti,twl4030-usb"; - interrupts = < 10 4 >; - usb1v5-supply = <&vusb1v5>; - usb1v8-supply = <&vusb1v8>; - usb3v1-supply = <&vusb3v1>; - usb_mode = <1>; -}; diff --git a/Documentation/devicetree/bindings/usb/usb251xb.yaml b/Documentation/devicetree/bindings/usb/usb251xb.yaml index ac5b99710332a7..0329a6aaaa928e 100644 --- a/Documentation/devicetree/bindings/usb/usb251xb.yaml +++ b/Documentation/devicetree/bindings/usb/usb251xb.yaml @@ -240,7 +240,6 @@ additionalProperties: false required: - compatible - - reg examples: - | @@ -269,3 +268,11 @@ examples: swap-dx-lanes = <1 2>; }; }; + + - | + #include <dt-bindings/gpio/gpio.h> + usb-hub { + /* I2C is not connected */ + compatible = "microchip,usb2512b"; + reset-gpios = <&porta 8 GPIO_ACTIVE_LOW>; + }; |