diff options
Diffstat (limited to 'Documentation/hwmon')
| -rw-r--r-- | Documentation/hwmon/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/hwmon/sa67.rst | 41 |
2 files changed, 42 insertions, 0 deletions
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 1803a43f6216b2..51a5bdf75b0865 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -214,6 +214,7 @@ Hardware Monitoring Kernel Drivers q54sj108a2 qnap-mcu-hwmon raspberrypi-hwmon + sa67 sbrmi sbtsi_temp sch5627 diff --git a/Documentation/hwmon/sa67.rst b/Documentation/hwmon/sa67.rst new file mode 100644 index 00000000000000..029c7c169b7fd2 --- /dev/null +++ b/Documentation/hwmon/sa67.rst @@ -0,0 +1,41 @@ +.. SPDX-License-Identifier: GPL-2.0-only + +Kernel driver sa67mcu +===================== + +Supported chips: + + * Kontron sa67mcu + + Prefix: 'sa67mcu' + + Datasheet: not available + +Authors: Michael Walle <mwalle@kernel.org> + +Description +----------- + +The sa67mcu is a board management controller which also exposes a hardware +monitoring controller. + +The controller has two voltage and one temperature sensor. The values are +hold in two 8 bit registers to form one 16 bit value. Reading the lower byte +will also capture the high byte to make the access atomic. The unit of the +volatge sensors are 1mV and the unit of the temperature sensor is 0.1degC. + +Sysfs entries +------------- + +The following attributes are supported. + +======================= ======================================================== +in0_label "VDDIN" +in0_input Measured VDDIN voltage. + +in1_label "VDD_RTC" +in1_input Measured VDD_RTC voltage. + +temp1_input MCU temperature. Roughly the board temperature. +======================= ======================================================== + |