| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library test updates from Eric Biggers:
- Add KUnit test suites for SHA-3, BLAKE2b, and POLYVAL. These are the
algorithms that have new crypto library interfaces this cycle.
- Remove the crypto_shash POLYVAL tests. They're no longer needed
because POLYVAL support was removed from crypto_shash. Better POLYVAL
test coverage is now provided via the KUnit test suite.
* tag 'libcrypto-tests-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
crypto: testmgr - Remove polyval tests
lib/crypto: tests: Add KUnit tests for POLYVAL
lib/crypto: tests: Add additional SHAKE tests
lib/crypto: tests: Add SHA3 kunit tests
lib/crypto: tests: Add KUnit tests for BLAKE2b
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.19. It includes:
- Add SHA-3 support to lib/crypto/, including support for both the
hash functions and the extendable-output functions. Reimplement the
existing SHA-3 crypto_shash support on top of the library.
This is motivated mainly by the upcoming support for the ML-DSA
signature algorithm, which needs the SHAKE128 and SHAKE256
functions. But even on its own it's a useful cleanup.
This also fixes the longstanding issue where the
architecture-optimized SHA-3 code was disabled by default.
- Add BLAKE2b support to lib/crypto/, and reimplement the existing
BLAKE2b crypto_shash support on top of the library.
This is motivated mainly by btrfs, which supports BLAKE2b
checksums. With this change, all btrfs checksum algorithms now have
library APIs. btrfs is planned to start just using the library
directly.
This refactor also improves consistency between the BLAKE2b code
and BLAKE2s code. And as usual, it also fixes the issue where the
architecture-optimized BLAKE2b code was disabled by default.
- Add POLYVAL support to lib/crypto/, replacing the existing POLYVAL
support in crypto_shash. Reimplement HCTR2 on top of the library.
This simplifies the code and improves HCTR2 performance. As usual,
it also makes the architecture-optimized code be enabled by
default. The generic implementation of POLYVAL is greatly improved
as well.
- Clean up the BLAKE2s code
- Add FIPS self-tests for SHA-1, SHA-2, and SHA-3"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (37 commits)
fscrypt: Drop obsolete recommendation to enable optimized POLYVAL
crypto: polyval - Remove the polyval crypto_shash
crypto: hctr2 - Convert to use POLYVAL library
lib/crypto: x86/polyval: Migrate optimized code into library
lib/crypto: arm64/polyval: Migrate optimized code into library
lib/crypto: polyval: Add POLYVAL library
crypto: polyval - Rename conflicting functions
lib/crypto: x86/blake2s: Use vpternlogd for 3-input XORs
lib/crypto: x86/blake2s: Avoid writing back unchanged 'f' value
lib/crypto: x86/blake2s: Improve readability
lib/crypto: x86/blake2s: Use local labels for data
lib/crypto: x86/blake2s: Drop check for nblocks == 0
lib/crypto: x86/blake2s: Fix 32-bit arg treated as 64-bit
lib/crypto: arm, arm64: Drop filenames from file comments
lib/crypto: arm/blake2s: Fix some comments
crypto: s390/sha3 - Remove superseded SHA-3 code
crypto: sha3 - Reimplement using library API
crypto: jitterentropy - Use default sha3 implementation
lib/crypto: s390/sha3: Add optimized one-shot SHA-3 digest functions
lib/crypto: sha3: Support arch overrides of one-shot digest functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add Nova Lake processor support to the Intel thermal drivers and
DPTF code, update thermal control documentation, simplify the ACPI
DPTF code related to thermal control, add QCS8300 compatible to the
tsens thermal DT bindings, add DT bindings for NXP i.MX91 thermal
module and add support for it to the imx91 thermal driver, update a
few other thermal drivers and fix a format string issue in a thermal
utility:
- Add Nova Lake processor thermal device to the int340x
processor_thermal driver, add DLVR support for Nova Lake to it, add
Nova Lake support to the ACPI DPTF code, document thermal
throttling on Intel platforms, and update workload type hint
interface documentation (Srinivas Pandruvada)
- Remove int340x thermal scan handler from the ACPI DPTF code because
it turned out to be unnecessary (Slawomir Rosek)
- Clean up the Intel int340x thermal driver (Kaushlendra Kumar)
- Document the RZ/V2H TSU DT bindings (Ovidiu Panait)
- Document the Kaanapali Temperature Sensor (Manaf Meethalavalappu
Pallikunhi)
- Document R-Car Gen4 and RZ/G2 support in driver comment (Marek
Vasut)
- Convert to DEFINE_SIMPLE_DEV_PM_OPS() in R-Car [Gen3] (Geert
Uytterhoeven)
- Fix format string bug in thermal-engine (Malaya Kumar Rout)
- Make ipq5018 tsens standalone compatible (George Moussalem)
- Add the QCS8300 compatible for QCom Tsens (Gaurav Kohli)
- Add support for the NXP i.MX91 thermal module, including the DT
bindings (Pengfei Li)"
* tag 'thermal-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/imx91: Add support for i.MX91 thermal monitoring unit
dt-bindings: thermal: fsl,imx91-tmu: add bindings for NXP i.MX91 thermal module
dt-bindings: thermal: tsens: Add QCS8300 compatible
dt-bindings: thermal: qcom-tsens: make ipq5018 tsens standalone compatible
tools/thermal/thermal-engine: Fix format string bug in thermal-engine
docs: driver-api/thermal/intel_dptf: Add new workload type hint
thermal/drivers/rcar_gen3: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
thermal/drivers/rcar: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
Documentation: thermal: Document thermal throttling on Intel platforms
ACPI: DPTF: Support Nova Lake
thermal: intel: int340x: Add DLVR support for Nova Lake
thermal: int340x: processor_thermal: Add Nova Lake processor thermal device
thermal: intel: int340x: Replace sprintf() with sysfs_emit()
thermal: intel: int340x: Use symbolic constant for UUID comparison
thermal/drivers/rcar_gen3: Document R-Car Gen4 and RZ/G2 support in driver comment
dt-bindings: thermal: qcom-tsens: document the Kaanapali Temperature Sensor
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2H TSU
ACPI: DPTF: Remove int340x thermal scan handler
thermal: intel: Select INT340X_THERMAL from INTEL_SOC_DTS_THERMAL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"There are quite a few interesting things here, including new hardware
support, new features, some bug fixes and documentation updates. In
addition, there are a usual bunch of minor fixes and cleanups all
over.
In the new hardware support category, there are intel_pstate and
intel_rapl driver updates to support new processors, Panther Lake,
Wildcat Lake, Noval Lake, and Diamond Rapids in the OOB mode, OPP and
bandwidth allocation support in the tegra186 cpufreq driver, and
JH7110S SOC support in dt-platdev cpufreq.
The new features are the PM QoS CPU latency limit for suspend-to-idle,
the netlink support for the energy model management, support for
terminating system suspend via a wakeup event during the sync of file
systems, configurable number of hibernation compression threads, the
runtime PM auto-cleanup macros, and the "poweroff" PM event that is
expected to be used during system shutdown.
Bugs are mostly fixed in cpuidle governors, but there are also fixes
elsewhere, like in the amd-pstate cpufreq driver.
Documentation updates include, but are not limited to, a new doc on
debugging shutdown hangs, cross-referencing fixes and cleanups in the
intel_pstate documentation, and updates of comments in the core
hibernation code.
Specifics:
- Introduce and document a QoS limit on CPU exit latency during
wakeup from suspend-to-idle (Ulf Hansson)
- Add support for building libcpupower statically (Zuo An)
- Add support for sending netlink notifications to user space on
energy model updates (Changwoo Mini, Peng Fan)
- Minor improvements to the Rust OPP interface (Tamir Duberstein)
- Fixes to scope-based pointers in the OPP library (Viresh Kumar)
- Use residency threshold in polling state override decisions in the
menu cpuidle governor (Aboorva Devarajan)
- Add sanity check for exit latency and target residency in the
cpufreq core (Rafael Wysocki)
- Use this_cpu_ptr() where possible in the teo governor (Christian
Loehle)
- Rework the handling of tick wakeups in the teo cpuidle governor to
increase the likelihood of stopping the scheduler tick in the cases
when tick wakeups can be counted as non-timer ones (Rafael Wysocki)
- Fix a reverse condition in the teo cpuidle governor and drop a
misguided target residency check from it (Rafael Wysocki)
- Clean up multiple minor defects in the teo cpuidle governor (Rafael
Wysocki)
- Update header inclusion to make it follow the Include What You Use
principle (Andy Shevchenko)
- Enable MSR-based RAPL PMU support in the intel_rapl power capping
driver and arrange for using it on the Panther Lake and Wildcat
Lake processors (Kuppuswamy Sathyanarayanan)
- Add support for Nova Lake and Wildcat Lake processors to the
intel_rapl power capping driver (Kaushlendra Kumar, Srinivas
Pandruvada)
- Add OPP and bandwidth support for Tegra186 (Aaron Kling)
- Optimizations for parameter array handling in the amd-pstate
cpufreq driver (Mario Limonciello)
- Fix for mode changes with offline CPUs in the amd-pstate cpufreq
driver (Gautham Shenoy)
- Preserve freq_table_sorted across suspend/hibernate in the cpufreq
core (Zihuan Zhang)
- Adjust energy model rules for Intel hybrid platforms in the
intel_pstate cpufreq driver and improve printing of debug messages
in it (Rafael Wysocki)
- Replace deprecated strcpy() in cpufreq_unregister_governor()
(Thorsten Blum)
- Fix duplicate hyperlink target errors in the intel_pstate cpufreq
driver documentation and use :ref: directive for internal linking
in it (Swaraj Gaikwad, Bagas Sanjaya)
- Add Diamond Rapids OOB mode support to the intel_pstate cpufreq
driver (Kuppuswamy Sathyanarayanan)
- Use mutex guard for driver locking in the intel_pstate driver and
eliminate some code duplication from it (Rafael Wysocki)
- Replace udelay() with usleep_range() in ACPI cpufreq (Kaushlendra
Kumar)
- Minor improvements to various cpufreq drivers (Christian Marangi,
Hal Feng, Jie Zhan, Marco Crivellari, Miaoqian Lin, and Shuhao Fu)
- Replace snprintf() with scnprintf() in show_trace_dev_match()
(Kaushlendra Kumar)
- Fix memory allocation error handling in pm_vt_switch_required()
(Malaya Kumar Rout)
- Introduce CALL_PM_OP() macro and use it to simplify code in generic
PM operations (Kaushlendra Kumar)
- Add module param to backtrace all CPUs in the device power
management watchdog (Sergey Senozhatsky)
- Rework message printing in swsusp_save() (Rafael Wysocki)
- Make it possible to change the number of hibernation compression
threads (Xueqin Luo)
- Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo)
- Add document on debugging shutdown hangs to PM documentation and
correct a mistaken configuration option in it (Mario Limonciello)
- Shut down wakeup source timer before removing the wakeup source
from the list (Kaushlendra Kumar, Rafael Wysocki)
- Introduce new PMSG_POWEROFF event for system shutdown handling with
the help of PM device callbacks (Mario Limonciello)
- Make pm_test delay interruptible by wakeup events (Riwen Lu)
- Clean up kernel-doc comment style usage in the core hibernation
code and remove unuseful comments from it (Sunday Adelodun, Rafael
Wysocki)
- Add support for handling wakeup events and aborting the suspend
process while it is syncing file systems (Samuel Wu, Rafael
Wysocki)
- Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari)
- Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use
them in the PCI core and the ACPI TAD driver (Rafael Wysocki)
- Improve runtime PM in the ACPI TAD driver (Rafael Wysocki)
- Update pm_runtime_allow/forbid() documentation (Rafael Wysocki)
- Fix typos in runtime.c comments (Malaya Kumar Rout)
- Move governor.h from devfreq under include/linux/ and rename to
devfreq-governor.h to allow devfreq governor definitions in out of
drivers/devfreq/ (Dmitry Baryshkov)
- Use min() to improve readability in tegra30-devfreq.c (Thorsten
Blum)
- Fix potential use-after-free issue of OPP handling in
hisi_uncore_freq.c (Pengjie Zhang)
- Fix typo in DFSO_DOWNDIFFERENTIAL macro name in
governor_simpleondemand.c in devfreq (Riwen Lu)"
* tag 'pm-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (96 commits)
PM / devfreq: Fix typo in DFSO_DOWNDIFFERENTIAL macro name
cpuidle: Warn instead of bailing out if target residency check fails
cpuidle: Update header inclusion
Documentation: power/cpuidle: Document the CPU system wakeup latency QoS
cpuidle: Respect the CPU system wakeup QoS limit for cpuidle
sched: idle: Respect the CPU system wakeup QoS limit for s2idle
pmdomain: Respect the CPU system wakeup QoS limit for cpuidle
pmdomain: Respect the CPU system wakeup QoS limit for s2idle
PM: QoS: Introduce a CPU system wakeup QoS limit
cpuidle: governors: teo: Add missing space to the description
PM: hibernate: Extra cleanup of comments in swap handling code
PM / devfreq: tegra30: use min to simplify actmon_cpu_to_emc_rate
PM / devfreq: hisi: Fix potential UAF in OPP handling
PM / devfreq: Move governor.h to a public header location
powercap: intel_rapl: Enable MSR-based RAPL PMU support
powercap: intel_rapl: Prepare read_raw() interface for atomic-context callers
cpufreq: qcom-nvmem: fix compilation warning for qcom_cpufreq_ipq806x_match_list
PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper()
PM: sleep: Add support for wakeup during filesystem sync
cpufreq: ACPI: Replace udelay() with usleep_range()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"These are the arm64 updates for 6.19.
The biggest part is the Arm MPAM driver under drivers/resctrl/.
There's a patch touching mm/ to handle spurious faults for huge pmd
(similar to the pte version). The corresponding arm64 part allows us
to avoid the TLB maintenance if a (huge) page is reused after a write
fault. There's EFI refactoring to allow runtime services with
preemption enabled and the rest is the usual perf/PMU updates and
several cleanups/typos.
Summary:
Core features:
- Basic Arm MPAM (Memory system resource Partitioning And Monitoring)
driver under drivers/resctrl/ which makes use of the fs/rectrl/ API
Perf and PMU:
- Avoid cycle counter on multi-threaded CPUs
- Extend CSPMU device probing and add additional filtering support
for NVIDIA implementations
- Add support for the PMUs on the NoC S3 interconnect
- Add additional compatible strings for new Cortex and C1 CPUs
- Add support for data source filtering to the SPE driver
- Add support for i.MX8QM and "DB" PMU in the imx PMU driver
Memory managemennt:
- Avoid broadcast TLBI if page reused in write fault
- Elide TLB invalidation if the old PTE was not valid
- Drop redundant cpu_set_*_tcr_t0sz() macros
- Propagate pgtable_alloc() errors outside of __create_pgd_mapping()
- Propagate return value from __change_memory_common()
ACPI and EFI:
- Call EFI runtime services without disabling preemption
- Remove unused ACPI function
Miscellaneous:
- ptrace support to disable streaming on SME-only systems
- Improve sysreg generation to include a 'Prefix' descriptor
- Replace __ASSEMBLY__ with __ASSEMBLER__
- Align register dumps in the kselftest zt-test
- Remove some no longer used macros/functions
- Various spelling corrections"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
arm64/mm: Document why linear map split failure upon vm_reset_perms is not problematic
arm64/pageattr: Propagate return value from __change_memory_common
arm64/sysreg: Remove unused define ARM64_FEATURE_FIELD_BITS
KVM: arm64: selftests: Consider all 7 possible levels of cache
KVM: arm64: selftests: Remove ARM64_FEATURE_FIELD_BITS and its last user
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
Documentation/arm64: Fix the typo of register names
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Provide a new interface for dynamic configuration and deconfiguration
of hotplug memory, allowing with and without memmap_on_memory
support. This makes the way memory hotplug is handled on s390 much
more similar to other architectures
- Remove compat support. There shouldn't be any compat user space
around anymore, therefore get rid of a lot of code which also doesn't
need to be tested anymore
- Add stackprotector support. GCC 16 will get new compiler options,
which allow to generate code required for kernel stackprotector
support
- Merge pai_crypto and pai_ext PMU drivers into a new driver. This
removes a lot of duplicated code. The new driver is also extendable
and allows to support new PMUs
- Add driver override support for AP queues
- Rework and extend zcrypt and AP trace events to allow for tracing of
crypto requests
- Support block sizes larger than 65535 bytes for CCW tape devices
- Since the rework of the virtual kernel address space the module area
and the kernel image are within the same 4GB area. This eliminates
the need of weak per cpu variables. Get rid of
ARCH_MODULE_NEEDS_WEAK_PER_CPU
- Various other small improvements and fixes
* tag 's390-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (92 commits)
watchdog: diag288_wdt: Remove KMSG_COMPONENT macro
s390/entry: Use lay instead of aghik
s390/vdso: Get rid of -m64 flag handling
s390/vdso: Rename vdso64 to vdso
s390: Rename head64.S to head.S
s390/vdso: Use common STABS_DEBUG and DWARF_DEBUG macros
s390: Add stackprotector support
s390/modules: Simplify module_finalize() slightly
s390: Remove KMSG_COMPONENT macro
s390/percpu: Get rid of ARCH_MODULE_NEEDS_WEAK_PER_CPU
s390/ap: Restrict driver_override versus apmask and aqmask use
s390/ap: Rename mutex ap_perms_mutex to ap_attr_mutex
s390/ap: Support driver_override for AP queue devices
s390/ap: Use all-bits-one apmask/aqmask for vfio in_use() checks
s390/debug: Update description of resize operation
s390/syscalls: Switch to generic system call table generation
s390/syscalls: Remove system call table pointer from thread_struct
s390/uapi: Remove 31 bit support from uapi header files
s390: Remove compat support
tools: Remove s390 compat support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Add support for AMD's Smart Data Cache Injection feature which allows
for direct insertion of data from I/O devices into the L3 cache, thus
bypassing DRAM and saving its bandwidth; the resctrl side of the
feature allows the size of the L3 used for data injection to be
controlled
- Add Intel Clearwater Forest to the list of CPUs which support
Sub-NUMA clustering
- Other fixes and cleanups
* tag 'x86_cache_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Update bit_usage to reflect io_alloc
fs/resctrl: Introduce interface to modify io_alloc capacity bitmasks
fs/resctrl: Modify struct rdt_parse_data to pass mode and CLOSID
fs/resctrl: Introduce interface to display io_alloc CBMs
fs/resctrl: Add user interface to enable/disable io_alloc feature
fs/resctrl: Introduce interface to display "io_alloc" support
x86,fs/resctrl: Implement "io_alloc" enable/disable handlers
x86,fs/resctrl: Detect io_alloc feature
x86/resctrl: Add SDCIAE feature in the command line options
x86/cpufeatures: Add support for L3 Smart Data Cache Injection Allocation Enforcement
fs/resctrl: Consider sparse masks when initializing new group's allocation
x86/resctrl: Support Sub-NUMA Cluster (SNC) mode on Clearwater Forest
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- imh_edac: Add a new EDAC driver for Intel Diamond Rapids and future
incarnations of this memory controllers architecture
- amd64_edac: Remove the legacy csrow sysfs interface which has been
deprecated and unused (we assume) for at least a decade
- Add the capability to fallback to BIOS-provided address translation
functionality (ACPI PRM) which can be used on systems unsupported by
the current AMD address translation library
- The usual fixes, fixlets, cleanups and improvements all over the
place
* tag 'edac_updates_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
RAS/AMD/ATL: Replace bitwise_xor_bits() with hweight16()
EDAC/igen6: Fix error handling in igen6_edac driver
EDAC/imh: Setup 'imh_test' debugfs testing node
EDAC/{skx_comm,imh}: Detect 2-level memory configuration
EDAC/skx_common: Extend the maximum number of DRAM chip row bits
EDAC/{skx_common,imh}: Add EDAC driver for Intel Diamond Rapids servers
EDAC/skx_common: Prepare for skx_set_hi_lo()
EDAC/skx_common: Prepare for skx_get_edac_list()
EDAC/{skx_common,skx,i10nm}: Make skx_register_mci() independent of pci_dev
EDAC/ghes: Replace deprecated strcpy() in ghes_edac_report_mem_error()
EDAC/ie31200: Fix error handling in ie31200_register_mci
RAS/CEC: Replace use of system_wq with system_percpu_wq
EDAC: Remove the legacy EDAC sysfs interface
EDAC/amd64: Remove NUM_CONTROLLERS macro
EDAC/amd64: Generate ctl_name string at runtime
RAS/AMD/ATL: Require PRM support for future systems
ACPI: PRM: Add acpi_prm_handler_available()
RAS/AMD/ATL: Return error codes from helper functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull clocksource updates from Thomas Gleixner:
"Updates for clocksource and clockevent drivers:
- A new driver for the Realtel system timer
- Prevent the unbinding of timers when the drivers do not support
that
- Expand the timer counter readout for the SPRD driver to 64 bit
to allow IOT devices suspend times of more than 36 hours, which
is the current limit of the 32-bi readout
- The usual small cleanups, fixes and enhancements all over the
place"
* tag 'timers-clocksource-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers: Add Realtek system timer driver
dt-bindings: timer: Add Realtek SYSTIMER
clocksource/drivers/stm32-lp: Drop unused module alias
clocksource/drivers/rda: Add sched_clock_register for RDA8810PL SoC
clocksource/drivers/nxp-stm: Prevent driver unbind
clocksource/drivers/nxp-pit: Prevent driver unbind
clocksource/drivers/arm_arch_timer_mmio: Prevent driver unbind
clocksource/drivers/nxp-stm: Fix section mismatches
clocksource/drivers/sh_cmt: Always leave device running after probe
clocksource/drivers/stm: Fix double deregistration on probe failure
clocksource/drivers/ralink: Fix resource leaks in init error path
clocksource/drivers/timer-sp804: Fix read_current_timer() issue when clock source is not registered
clocksource/drivers/sprd: Enable register for timer counter from 32 bit to 64 bit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq driver updates from Thomas Gleixner:
"Boring updates for interrupt drivers:
- Support for a couple of new ARM64 and RISCV SoC variants and their
magic interrupt controllers which either can reuse existing code or
require quirks due to a botched hardware implementation
- More section mismatch fixes
- The usual cleanups and fixes all over the place"
* tag 'irq-drivers-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
irqchip/meson-gpio: Add support for Amlogic S6 S7 and S7D SoCs
dt-bindings: interrupt-controller: Add support for Amlogic S6 S7 and S7D SoCs
dt-bindings: interrupt-controller: aspeed,ast2700: Correct #interrupt-cells and interrupts count
irqchip/aclint-sswi: Add Nuclei UX900 support
dt-bindings: interrupt-controller: Add Anlogic DR1V90 ACLINT SSWI
dt-bindings: interrupt-controller: Add Anlogic DR1V90 ACLINT MSWI
dt-bindings: interrupt-controller: Add Anlogic DR1V90 PLIC
irqchip/irq-bcm7038-l1: Remove unused reg_mask_status()
irqchip/sifive-plic: Fix call to __plic_toggle() in M-Mode code path
irqchip/sifive-plic: Add support for UltraRISC DP1000 PLIC
irqchip/sifive-plic: Cache the interrupt enable state
dt-bindings: interrupt-controller: Add UltraRISC DP1000 PLIC
dt-bindings: vendor-prefixes: Add UltraRISC
irqchip/qcom-irq-combiner: Rename driver structure
irqchip/riscv-imsic: Inline imsic_vector_from_local_id()
irqchip/riscv-imsic: Embed the vector array in lpriv
irqchip/riscv-imsic: Remove redundant irq_data lookups
irqchip/ts4800: Drop unused module alias
irqchip/mvebu-pic: Drop unused module alias
irqchip/meson-gpio: Drop unused module alias
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rseq updates from Thomas Gleixner:
"A large overhaul of the restartable sequences and CID management:
The recent enablement of RSEQ in glibc resulted in regressions which
are caused by the related overhead. It turned out that the decision to
invoke the exit to user work was not really a decision. More or less
each context switch caused that. There is a long list of small issues
which sums up nicely and results in a 3-4% regression in I/O
benchmarks.
The other detail which caused issues due to extra work in context
switch and task migration is the CID (memory context ID) management.
It also requires to use a task work to consolidate the CID space,
which is executed in the context of an arbitrary task and results in
sporadic uncontrolled exit latencies.
The rewrite addresses this by:
- Removing deprecated and long unsupported functionality
- Moving the related data into dedicated data structures which are
optimized for fast path processing.
- Caching values so actual decisions can be made
- Replacing the current implementation with a optimized inlined
variant.
- Separating fast and slow path for architectures which use the
generic entry code, so that only fault and error handling goes into
the TIF_NOTIFY_RESUME handler.
- Rewriting the CID management so that it becomes mostly invisible in
the context switch path. That moves the work of switching modes
into the fork/exit path, which is a reasonable tradeoff. That work
is only required when a process creates more threads than the
cpuset it is allowed to run on or when enough threads exit after
that. An artificial thread pool benchmarks which triggers this did
not degrade, it actually improved significantly.
The main effect in migration heavy scenarios is that runqueue lock
held time and therefore contention goes down significantly"
* tag 'core-rseq-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched/mmcid: Switch over to the new mechanism
sched/mmcid: Implement deferred mode change
irqwork: Move data struct to a types header
sched/mmcid: Provide CID ownership mode fixup functions
sched/mmcid: Provide new scheduler CID mechanism
sched/mmcid: Introduce per task/CPU ownership infrastructure
sched/mmcid: Serialize sched_mm_cid_fork()/exit() with a mutex
sched/mmcid: Provide precomputed maximal value
sched/mmcid: Move initialization out of line
signal: Move MMCID exit out of sighand lock
sched/mmcid: Convert mm CID mask to a bitmap
cpumask: Cache num_possible_cpus()
sched/mmcid: Use cpumask_weighted_or()
cpumask: Introduce cpumask_weighted_or()
sched/mmcid: Prevent pointless work in mm_update_cpus_allowed()
sched/mmcid: Move scheduler code out of global header
sched: Fixup whitespace damage
sched/mmcid: Cacheline align MM CID storage
sched/mmcid: Use proper data structures
sched/mmcid: Revert the complex CID management
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Mutexes:
- Redo __mutex_init() to reduce generated code size (Sebastian
Andrzej Siewior)
Seqlocks:
- Introduce scoped_seqlock_read() (Peter Zijlstra)
- Change thread_group_cputime() to use scoped_seqlock_read() (Oleg
Nesterov)
- Change do_task_stat() to use scoped_seqlock_read() (Oleg Nesterov)
- Change do_io_accounting() to use scoped_seqlock_read() (Oleg
Nesterov)
- Fix the incorrect documentation of read_seqbegin_or_lock() /
need_seqretry() (Oleg Nesterov)
- Allow KASAN to fail optimizing (Peter Zijlstra)
Local lock updates:
- Fix all kernel-doc warnings (Randy Dunlap)
- Add the <linux/local_lock*.h> headers to MAINTAINERS (Sebastian
Andrzej Siewior)
- Reduce the risk of shadowing via s/l/__l/ and s/tl/__tl/ (Vincent
Mailhol)
Lock debugging:
- spinlock/debug: Fix data-race in do_raw_write_lock (Alexander
Sverdlin)
Atomic primitives infrastructure:
- atomic: Skip alignment check for try_cmpxchg() old arg (Arnd
Bergmann)
Rust runtime integration:
- sync: atomic: Enable generated Atomic<T> usage (Boqun Feng)
- sync: atomic: Implement Debug for Atomic<Debug> (Boqun Feng)
- debugfs: Remove Rust native atomics and replace them with Linux
versions (Boqun Feng)
- debugfs: Implement Reader for Mutex<T> only when T is Unpin (Boqun
Feng)
- lock: guard: Add T: Unpin bound to DerefMut (Daniel Almeida)
- lock: Pin the inner data (Daniel Almeida)
- lock: Add a Pin<&mut T> accessor (Daniel Almeida)"
* tag 'locking-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/local_lock: Fix all kernel-doc warnings
locking/local_lock: s/l/__l/ and s/tl/__tl/ to reduce the risk of shadowing
locking/local_lock: Add the <linux/local_lock*.h> headers to MAINTAINERS
locking/mutex: Redo __mutex_init() to reduce generated code size
rust: debugfs: Replace the usage of Rust native atomics
rust: sync: atomic: Implement Debug for Atomic<Debug>
rust: sync: atomic: Make Atomic*Ops pub(crate)
seqlock: Allow KASAN to fail optimizing
rust: debugfs: Implement Reader for Mutex<T> only when T is Unpin
seqlock: Change do_io_accounting() to use scoped_seqlock_read()
seqlock: Change do_task_stat() to use scoped_seqlock_read()
seqlock: Change thread_group_cputime() to use scoped_seqlock_read()
seqlock: Introduce scoped_seqlock_read()
documentation: seqlock: fix the wrong documentation of read_seqbegin_or_lock/need_seqretry
atomic: Skip alignment check for try_cmpxchg() old arg
rust: lock: Add a Pin<&mut T> accessor
rust: lock: Pin the inner data
rust: lock: guard: Add T: Unpin bound to DerefMut
locking/spinlock/debug: Fix data-race in do_raw_write_lock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull directory locking updates from Christian Brauner:
"This contains the work to add centralized APIs for directory locking
operations.
This series is part of a larger effort to change directory operation
locking to allow multiple concurrent operations in a directory. The
ultimate goal is to lock the target dentry(s) rather than the whole
parent directory.
To help with changing the locking protocol, this series centralizes
locking and lookup in new helper functions. The helpers establish a
pattern where it is the dentry that is being locked and unlocked
(currently the lock is held on dentry->d_parent->d_inode, but that can
change in the future).
This also changes vfs_mkdir() to unlock the parent on failure, as well
as dput()ing the dentry. This allows end_creating() to only require
the target dentry (which may be IS_ERR() after vfs_mkdir()), not the
parent"
* tag 'vfs-6.19-rc1.directory.locking' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nfsd: fix end_creating() conversion
VFS: introduce end_creating_keep()
VFS: change vfs_mkdir() to unlock on failure.
ecryptfs: use new start_creating/start_removing APIs
Add start_renaming_two_dentries()
VFS/ovl/smb: introduce start_renaming_dentry()
VFS/nfsd/ovl: introduce start_renaming() and end_renaming()
VFS: add start_creating_killable() and start_removing_killable()
VFS: introduce start_removing_dentry()
smb/server: use end_removing_noperm for for target of smb2_create_link()
VFS: introduce start_creating_noperm() and start_removing_noperm()
VFS/nfsd/cachefiles/ovl: introduce start_removing() and end_removing()
VFS/nfsd/cachefiles/ovl: add start_creating() and end_creating()
VFS: tidy up do_unlinkat()
VFS: introduce start_dirop() and end_dirop()
debugfs: rename end_creating() to debugfs_end_creating()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs inode updates from Christian Brauner:
"Features:
- Hide inode->i_state behind accessors. Open-coded accesses prevent
asserting they are done correctly. One obvious aspect is locking,
but significantly more can be checked. For example it can be
detected when the code is clearing flags which are already missing,
or is setting flags when it is illegal (e.g., I_FREEING when
->i_count > 0)
- Provide accessors for ->i_state, converts all filesystems using
coccinelle and manual conversions (btrfs, ceph, smb, f2fs, gfs2,
overlayfs, nilfs2, xfs), and makes plain ->i_state access fail to
compile
- Rework I_NEW handling to operate without fences, simplifying the
code after the accessor infrastructure is in place
Cleanups:
- Move wait_on_inode() from writeback.h to fs.h
- Spell out fenced ->i_state accesses with explicit smp_wmb/smp_rmb
for clarity
- Cosmetic fixes to LRU handling
- Push list presence check into inode_io_list_del()
- Touch up predicts in __d_lookup_rcu()
- ocfs2: retire ocfs2_drop_inode() and I_WILL_FREE usage
- Assert on ->i_count in iput_final()
- Assert ->i_lock held in __iget()
Fixes:
- Add missing fences to I_NEW handling"
* tag 'vfs-6.19-rc1.inode' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (22 commits)
dcache: touch up predicts in __d_lookup_rcu()
fs: push list presence check into inode_io_list_del()
fs: cosmetic fixes to lru handling
fs: rework I_NEW handling to operate without fences
fs: make plain ->i_state access fail to compile
xfs: use the new ->i_state accessors
nilfs2: use the new ->i_state accessors
overlayfs: use the new ->i_state accessors
gfs2: use the new ->i_state accessors
f2fs: use the new ->i_state accessors
smb: use the new ->i_state accessors
ceph: use the new ->i_state accessors
btrfs: use the new ->i_state accessors
Manual conversion to use ->i_state accessors of all places not covered by coccinelle
Coccinelle-based conversion to use ->i_state accessors
fs: provide accessors for ->i_state
fs: spell out fenced ->i_state accesses with explicit smp_wmb/smp_rmb
fs: move wait_on_inode() from writeback.h to fs.h
fs: add missing fences to I_NEW handling
ocfs2: retire ocfs2_drop_inode() and I_WILL_FREE usage
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull iomap updates from Christian Brauner:
"FUSE iomap Support for Buffered Reads:
This adds iomap support for FUSE buffered reads and readahead. This
enables granular uptodate tracking with large folios so only
non-uptodate portions need to be read. Also fixes a race condition
with large folios + writeback cache that could cause data corruption
on partial writes followed by reads.
- Refactored iomap read/readahead bio logic into helpers
- Added caller-provided callbacks for read operations
- Moved buffered IO bio logic into new file
- FUSE now uses iomap for read_folio and readahead
Zero Range Folio Batch Support:
Add folio batch support for iomap_zero_range() to handle dirty
folios over unwritten mappings. Fix raciness issues where dirty data
could be lost during zero range operations.
- filemap_get_folios_tag_range() helper for dirty folio lookup
- Optional zero range dirty folio processing
- XFS fills dirty folios on zero range of unwritten mappings
- Removed old partial EOF zeroing optimization
DIO Write Completions from Interrupt Context:
Restore pre-iomap behavior where pure overwrite completions run
inline rather than being deferred to workqueue. Reduces context
switches for high-performance workloads like ScyllaDB.
- Removed unused IOCB_DIO_CALLER_COMP code
- Error completions always run in user context (fixes zonefs)
- Reworked REQ_FUA selection logic
- Inverted IOMAP_DIO_INLINE_COMP to IOMAP_DIO_OFFLOAD_COMP
Buffered IO Cleanups:
Some performance and code clarity improvements:
- Replace manual bitmap scanning with find_next_bit()
- Simplify read skip logic for writes
- Optimize pending async writeback accounting
- Better variable naming
- Documentation for iomap_finish_folio_write() requirements
Misaligned Vectors for Zoned XFS:
Enables sub-block aligned vectors in XFS always-COW mode for zoned
devices via new IOMAP_DIO_FSBLOCK_ALIGNED flag.
Bug Fixes:
- Allocate s_dio_done_wq for async reads (fixes syzbot report after
error completion changes)
- Fix iomap_read_end() for already uptodate folios (regression fix)"
* tag 'vfs-6.19-rc1.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (40 commits)
iomap: allocate s_dio_done_wq for async reads as well
iomap: fix iomap_read_end() for already uptodate folios
iomap: invert the polarity of IOMAP_DIO_INLINE_COMP
iomap: support write completions from interrupt context
iomap: rework REQ_FUA selection
iomap: always run error completions in user context
fs, iomap: remove IOCB_DIO_CALLER_COMP
iomap: use find_next_bit() for uptodate bitmap scanning
iomap: use find_next_bit() for dirty bitmap scanning
iomap: simplify when reads can be skipped for writes
iomap: simplify ->read_folio_range() error handling for reads
iomap: optimize pending async writeback accounting
docs: document iomap writeback's iomap_finish_folio_write() requirement
iomap: account for unaligned end offsets when truncating read range
iomap: rename bytes_pending/bytes_accounted to bytes_submitted/bytes_not_submitted
xfs: support sub-block aligned vectors in always COW mode
iomap: add IOMAP_DIO_FSBLOCK_ALIGNED flag
xfs: error tag to force zeroing on debug kernels
iomap: remove old partial eof zeroing optimization
xfs: fill dirty folios on zero range of unwritten mappings
...
|
|
Merge PM QoS updates and a cpupower utility update for 6.19-rc1:
- Introduce and document a QoS limit on CPU exit latency during wakeup
from suspend-to-idle (Ulf Hansson)
- Add support for building libcpupower statically (Zuo An)
* pm-qos:
Documentation: power/cpuidle: Document the CPU system wakeup latency QoS
cpuidle: Respect the CPU system wakeup QoS limit for cpuidle
sched: idle: Respect the CPU system wakeup QoS limit for s2idle
pmdomain: Respect the CPU system wakeup QoS limit for cpuidle
pmdomain: Respect the CPU system wakeup QoS limit for s2idle
PM: QoS: Introduce a CPU system wakeup QoS limit
* pm-tools:
tools/power/cpupower: Support building libcpupower statically
|
|
'for-next/efi-preempt', 'for-next/assembler-macro', 'for-next/typos', 'for-next/sme-ptrace-disable', 'for-next/local-tlbi-page-reused', 'for-next/mpam', 'for-next/acpi' and 'for-next/documentation', remote-tracking branch 'arm64/for-next/perf' into for-next/core
* arm64/for-next/perf:
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arch_topology: Provide a stub topology_core_has_smt() for !CONFIG_GENERIC_ARCH_TOPOLOGY
perf/arm-ni: Fix and optimise register offset calculation
perf: arm_pmuv3: Add new Cortex and C1 CPU PMUs
perf: arm_cspmu: fix error handling in arm_cspmu_impl_unregister()
perf/arm-ni: Add NoC S3 support
perf/arm_cspmu: nvidia: Add pmevfiltr2 support
perf/arm_cspmu: nvidia: Add revision id matching
perf/arm_cspmu: Add pmpidr support
perf/arm_cspmu: Add callback to reset filter config
perf: arm_pmuv3: Don't use PMCCNTR_EL0 on SMT cores
* for-next/misc:
: Miscellaneous patches
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
arm64: mm: make linear mapping permission update more robust for patial range
arm64/mm: Elide TLB flush in certain pte protection transitions
arm64/mm: Rename try_pgd_pgtable_alloc_init_mm
arm64/mm: Allow __create_pgd_mapping() to propagate pgtable_alloc() errors
arm64: add unlikely hint to MTE async fault check in el0_svc_common
arm64: acpi: add newline to deferred APEI warning
arm64: entry: Clean out some indirection
arm64/mm: Ensure PGD_SIZE is aligned to 64 bytes when PA_BITS = 52
arm64/mm: Drop cpu_set_[default|idmap]_tcr_t0sz()
arm64: remove unused ARCH_PFN_OFFSET
arm64: use SOFTIRQ_ON_OWN_STACK for enabling softirq stack
arm64: Remove assertion on CONFIG_VMAP_STACK
* for-next/kselftest:
: arm64 kselftest patches
kselftest/arm64: Align zt-test register dumps
* for-next/efi-preempt:
: arm64: Make EFI calls preemptible
arm64/efi: Call EFI runtime services without disabling preemption
arm64/efi: Move uaccess en/disable out of efi_set_pgd()
arm64/efi: Drop efi_rt_lock spinlock from EFI arch wrapper
arm64/fpsimd: Permit kernel mode NEON with IRQs off
arm64/fpsimd: Don't warn when EFI execution context is preemptible
efi/runtime-wrappers: Keep track of the efi_runtime_lock owner
efi: Add missing static initializer for efi_mm::cpus_allowed_lock
* for-next/assembler-macro:
: arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in headers
arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
arm64: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
* for-next/typos:
: Random typo/spelling fixes
arm64: Fix double word in comments
arm64: Fix typos and spelling errors in comments
* for-next/sme-ptrace-disable:
: Support disabling streaming mode via ptrace on SME only systems
kselftest/arm64: Cover disabling streaming mode without SVE in fp-ptrace
kselftst/arm64: Test NT_ARM_SVE FPSIMD format writes on non-SVE systems
arm64/sme: Support disabling streaming mode via ptrace on SME only systems
* for-next/local-tlbi-page-reused:
: arm64, mm: avoid TLBI broadcast if page reused in write fault
arm64, tlbflush: don't TLBI broadcast if page reused in write fault
mm: add spurious fault fixing support for huge pmd
* for-next/mpam: (34 commits)
: Basic Arm MPAM driver (more to follow)
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
arm_mpam: Use long MBWU counters if supported
arm_mpam: Probe for long/lwd mbwu counters
arm_mpam: Consider overflow in bandwidth counter state
arm_mpam: Track bandwidth counter state for power management
arm_mpam: Add mpam_msmon_read() to read monitor value
arm_mpam: Add helpers to allocate monitors
arm_mpam: Probe and reset the rest of the features
arm_mpam: Allow configuration to be applied and restored during cpu online
arm_mpam: Use a static key to indicate when mpam is enabled
arm_mpam: Register and enable IRQs
arm_mpam: Extend reset logic to allow devices to be reset any time
arm_mpam: Add a helper to touch an MSC from any CPU
arm_mpam: Reset MSC controls from cpuhp callbacks
arm_mpam: Merge supported features during mpam_enable() into mpam_class
arm_mpam: Probe the hardware features resctrl supports
arm_mpam: Add helpers for managing the locking around the mon_sel registers
...
* for-next/acpi:
: arm64 acpi updates
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
* for-next/documentation:
: arm64 Documentation updates
Documentation/arm64: Fix the typo of register names
|
|
Merge energy model management updates and operating performance points
(OPP) library changes for 6.19-rc1:
- Add support for sending netlink notifications to user space on energy
model updates (Changwoo Mini, Peng Fan)
- Minor improvements to the Rust OPP interface (Tamir Duberstein)
- Fixes to scope-based pointers in the OPP library (Viresh Kumar)
* pm-em:
PM: EM: Add to em_pd_list only when no failure
PM: EM: Notify an event when the performance domain changes
PM: EM: Implement em_notify_pd_created/updated()
PM: EM: Implement em_notify_pd_deleted()
PM: EM: Implement em_nl_get_pd_table_doit()
PM: EM: Implement em_nl_get_pds_doit()
PM: EM: Add an iterator and accessor for the performance domain
PM: EM: Add a skeleton code for netlink notification
PM: EM: Add em.yaml and autogen files
PM: EM: Expose the ID of a performance domain via debugfs
PM: EM: Assign a unique ID when creating a performance domain
* pm-opp:
rust: opp: simplify callers of `to_c_str_array`
OPP: Initialize scope-based pointers inline
rust: opp: fix broken rustdoc link
|
|
Merge cpufreq updates for 6.19-rc1:
- Add OPP and bandwidth support for Tegra186 (Aaron Kling)
- Optimizations for parameter array handling in the amd-pstate cpufreq
driver (Mario Limonciello)
- Fix for mode changes with offline CPUs in the amd-pstate cpufreq
driver (Gautham Shenoy)
- Preserve freq_table_sorted across suspend/hibernate in the cpufreq
core (Zihuan Zhang)
- Adjust energy model rules for Intel hybrid platforms in the
intel_pstate cpufreq driver and improve printing of debug messages
in it (Rafael Wysocki)
- Replace deprecated strcpy() in cpufreq_unregister_governor()
(Thorsten Blum)
- Fix duplicate hyperlink target errors in the intel_pstate cpufreq
driver documentation and use :ref: directive for internal linking in
it (Swaraj Gaikwad, Bagas Sanjaya)
- Add Diamond Rapids OOB mode support to the intel_pstate cpufreq
driver (Kuppuswamy Sathyanarayanan)
- Use mutex guard for driver locking in the intel_pstate driver and
eliminate some code duplication from it (Rafael Wysocki)
- Replace udelay() with usleep_range() in ACPI cpufreq (Kaushlendra
Kumar)
- Minor improvements to various cpufreq drivers (Christian Marangi, Hal
Feng, Jie Zhan, Marco Crivellari, Miaoqian Lin, and Shuhao Fu)
* pm-cpufreq: (27 commits)
cpufreq: qcom-nvmem: fix compilation warning for qcom_cpufreq_ipq806x_match_list
cpufreq: ACPI: Replace udelay() with usleep_range()
cpufreq: intel_pstate: Eliminate some code duplication
cpufreq: intel_pstate: Use mutex guard for driver locking
cpufreq/amd-pstate: Call cppc_set_auto_sel() only for online CPUs
cpufreq/amd-pstate: Add static asserts for EPP indices
cpufreq/amd-pstate: Fix some whitespace issues
cpufreq/amd-pstate: Adjust return values in amd_pstate_update_status()
cpufreq/amd-pstate: Make amd_pstate_get_mode_string() never return NULL
cpufreq/amd-pstate: Drop NULL value from amd_pstate_mode_string
cpufreq/amd-pstate: Use sysfs_match_string() for epp
cpufreq: tegra194: add WQ_PERCPU to alloc_workqueue users
cpufreq: qcom-nvmem: add compatible fallback for ipq806x for no SMEM
Documentation: intel-pstate: Use :ref: directive for internal linking
cpufreq: intel_pstate: Add Diamond Rapids OOB mode support
Documentation: intel_pstate: fix duplicate hyperlink target errors
cpufreq: CPPC: Don't warn if FIE init fails to read counters
cpufreq: nforce2: fix reference count leak in nforce2
cpufreq: tegra186: add OPP support and set bandwidth
cpufreq: dt-platdev: Add JH7110S SOC to the allowlist
...
|
|
Merge updates related to system suspend and hibernation for 6.19-rc1:
- Replace snprintf() with scnprintf() in show_trace_dev_match()
(Kaushlendra Kumar)
- Fix memory allocation error handling in pm_vt_switch_required()
(Malaya Kumar Rout)
- Introduce CALL_PM_OP() macro and use it to simplify code in
generic PM operations (Kaushlendra Kumar)
- Add module param to backtrace all CPUs in the device power management
watchdog (Sergey Senozhatsky)
- Rework message printing in swsusp_save() (Rafael Wysocki)
- Make it possible to change the number of hibernation compression
threads (Xueqin Luo)
- Clarify that only cgroup1 freezer uses PM freezer (Tejun Heo)
- Add document on debugging shutdown hangs to PM documentation and
correct a mistaken configuration option in it (Mario Limonciello)
- Shut down wakeup source timer before removing the wakeup source from
the list (Kaushlendra Kumar, Rafael Wysocki)
- Introduce new PMSG_POWEROFF event for system shutdown handling with
the help of PM device callbacks (Mario Limonciello)
- Make pm_test delay interruptible by wakeup events (Riwen Lu)
- Clean up kernel-doc comment style usage in the core hibernation
code and remove unuseful comments from it (Sunday Adelodun, Rafael
Wysocki)
- Add support for handling wakeup events and aborting the suspend
process while it is syncing file systems (Samuel Wu, Rafael Wysocki)
* pm-sleep: (21 commits)
PM: hibernate: Extra cleanup of comments in swap handling code
PM: sleep: Call pm_sleep_fs_sync() instead of ksys_sync_helper()
PM: sleep: Add support for wakeup during filesystem sync
PM: hibernate: Clean up kernel-doc comment style usage
PM: suspend: Make pm_test delay interruptible by wakeup events
usb: sl811-hcd: Add PM_EVENT_POWEROFF into suspend callbacks
scsi: Add PM_EVENT_POWEROFF into suspend callbacks
PM: Introduce new PMSG_POWEROFF event
PM: wakeup: Update after recent wakeup source removal ordering change
PM: wakeup: Delete timer before removing wakeup source from list
Documentation: power: Correct a mistaken configuration option
Documentation: power: Add document on debugging shutdown hangs
freezer: Clarify that only cgroup1 freezer uses PM freezer
PM: hibernate: add sysfs interface for hibernate_compression_threads
PM: hibernate: make compression threads configurable
PM: hibernate: dynamically allocate crc->unc_len/unc for configurable threads
PM: hibernate: Rework message printing in swsusp_save()
PM: dpm_watchdog: add module param to backtrace all CPUs
PM: sleep: Introduce CALL_PM_OP() macro to simplify code
PM: console: Fix memory allocation error handling in pm_vt_switch_required()
...
|
|
Merge a core power management update and runtime PM framework updates
for 6.19-rc1:
- Add WQ_UNBOUND to pm_wq workqueue (Marco Crivellari)
- Add runtime PM wrapper macros for ACQUIRE()/ACQUIRE_ERR() and use
them in the PCI core and the ACPI TAD driver (Rafael Wysocki)
- Improve runtime PM in the ACPI TAD driver (Rafael Wysocki)
- Update pm_runtime_allow/forbid() documentation (Rafael Wysocki)
- Fix typos in runtime.c comments (Malaya Kumar Rout)
* pm-core:
PM: WQ_UNBOUND added to pm_wq workqueue
* pm-runtime:
PCI/sysfs: Use PM_RUNTIME_ACQUIRE()/PM_RUNTIME_ACQUIRE_ERR()
ACPI: TAD: Use PM_RUNTIME_ACQUIRE()/PM_RUNTIME_ACQUIRE_ERR()
PM: runtime: Wrapper macros for ACQUIRE()/ACQUIRE_ERR()
PM: runtime: fix typos in runtime.c comments
ACPI: TAD: Improve runtime PM using guard macros
ACPI: TAD: Rearrange runtime PM operations in acpi_tad_remove()
PM: runtime: docs: Update pm_runtime_allow/forbid() documentation
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control changes for 6.19-rc1 from Daniel Lezcano:
"- Document the RZ/V2H TSU DT bindings (Ovidiu Panait)
- Document the Kaanapali Temperature Sensor (Manaf Meethalavalappu
Pallikunhi)
- Document R-Car Gen4 and RZ/G2 support in driver comment (Marek Vasut)
- Convert to DEFINE_SIMPLE_DEV_PM_OPS in the R-Car [Gen3] (Geert
Uytterhoeven)
- Fix format string bug in thermal-engine (Malaya Kumar Rout)
- Make ipq5018 tsens standalone compatible (George Moussalem)
- Add the QCS8300 compatible for the QCom Tsens (Gaurav Kohli)
- Add the support for the NXP i.MX91 thermal module, including the DT
bindings (Pengfei Li)
* tag 'thermal-v6.19-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/imx91: Add support for i.MX91 thermal monitoring unit
dt-bindings: thermal: fsl,imx91-tmu: add bindings for NXP i.MX91 thermal module
dt-bindings: thermal: tsens: Add QCS8300 compatible
dt-bindings: thermal: qcom-tsens: make ipq5018 tsens standalone compatible
tools/thermal/thermal-engine: Fix format string bug in thermal-engine
thermal/drivers/rcar_gen3: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
thermal/drivers/rcar: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
thermal/drivers/rcar_gen3: Document R-Car Gen4 and RZ/G2 support in driver comment
dt-bindings: thermal: qcom-tsens: document the Kaanapali Temperature Sensor
dt-bindings: thermal: r9a09g047-tsu: Document RZ/V2H TSU
|
|
Add bindings documentation for i.MX91 thermal modules.
Signed-off-by: Pengfei Li <pengfei.li_1@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251020-imx91tmu-v7-1-48d7d9f25055@nxp.com
|
|
Add compatibility string for the thermal sensors on QCS8300 platform.
Signed-off-by: Gaurav Kohli <quic_gkohli@quicinc.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Link: https://patch.msgid.link/20250822042316.1762153-2-quic_gkohli@quicinc.com
|
|
The Realtek SYSTIMER (System Timer) is a 64-bit global hardware counter
operating at a fixed 1MHz frequency. Thanks to its compare match
interrupt capability, the timer natively supports oneshot mode for tick
broadcast functionality.
Signed-off-by: Hao-Wen Ting <haowen.ting@realtek.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20251126060110.198330-2-haowen.ting@realtek.com
|
|
Let's document how the new CPU system wakeup latency QoS limit can be used
from user space, along with how the constraint is taken into account for
s2idle and cpuidle.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman (TI) <khilman@baylibre.com>
Tested-by: Kevin Hilman (TI) <khilman@baylibre.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20251125112650.329269-7-ulf.hansson@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The tsens IP found in the IPQ5018 SoC should not use qcom,tsens-v1 as
fallback since it has no RPM and, as such, must deviate from the
standard v1 init routine as this version of tsens needs to be explicitly
reset and enabled in the driver.
So let's make qcom,ipq5018-tsens a standalone compatible in the bindings.
Fixes: 77c6d28192ef ("dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://patch.msgid.link/20250818-ipq5018-tsens-fix-v1-1-0f08cf09182d@outlook.com
|
|
The register name 'HWFGWTR_EL2' and 'HWFGRTR_EL2' is wrong, should be 'HFGWTR_EL2' and 'HFGRTR_EL2'.
Find the register description on arm website here,
https://developer.arm.com/documentation/ddi0601/2025-09/AArch64-Registers/HFGWTR-EL2--Hypervisor-Fine-Grained-Write-Trap-Register
https://developer.arm.com/documentation/ddi0601/2025-09/AArch64-Registers/HFGRTR-EL2--Hypervisor-Fine-Grained-Read-Trap-Register?lang=en
Signed-off-by: Zenon Xiu <zenonxiu@outlook.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This was added by commit 099ada2c8726 ("io_uring/rw: add write support
for IOCB_DIO_CALLER_COMP") and disabled a little later by commit
838b35bb6a89 ("io_uring/rw: disable IOCB_DIO_CALLER_COMP") because it
didn't work. Remove all the related code that sat unused for 2 years.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20251113170633.1453259-2-hch@lst.de
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
and i.MX8DXL
Add compatible string fsl,imx8qm-ddr-pmu, fsl,imx8qxp-ddr-pmu, which
fallback to fsl,imx8-ddr-pmu and fsl,imx8dxl-db-pmu (for data bus fabric).
Add clocks, clock-names for fsl,imx8dxl-db-pmu and keep the same
restriction for existing compatible strings.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- INPUT_PROP_HAPTIC_TOUCHPAD definition added early in 6.18 cycle has
been renamed to INPUT_PROP_PRESSUREPAD to better reflect the kind of
devices it is supposed to be set for
- a new ID for a touchscreen found in Ayaneo Flip DS in Goodix driver
- Goodix driver no longer tries to set reset pin as "input" as it
causes issues when there is no pull up resistor installed on the
board
- fixes for cros_ec_keyb, imx_sc_key, and pegasus-notetaker drivers to
deal with potential out-of-bounds access and memory corruption issues
* tag 'input-for-v6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: rename INPUT_PROP_HAPTIC_TOUCHPAD to INPUT_PROP_PRESSUREPAD
Input: cros_ec_keyb - fix an invalid memory access
Input: imx_sc_key - fix memory corruption on unload
Input: pegasus-notetaker - fix potential out-of-bounds access
Input: goodix - remove setting of RST pin to input
Input: goodix - add support for ACPI ID GDIX1003
|
|
The "shareable_bits" and "bit_usage" resctrl files associated with cache
resources give insight into how instances of a cache is used.
Update the annotated capacity bitmasks displayed by "bit_usage" to include the
cache portions allocated for I/O via the "io_alloc" feature. "shareable_bits"
is a global bitmask of shareable cache with I/O and can thus not present the
per-domain I/O allocations possible with the "io_alloc" feature. Revise the
"shareable_bits" documentation to direct users to "bit_usage" for accurate
cache usage information.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/e02a0d424129fd7f3e45822a559b1c614ae4652a.1762995456.git.babu.moger@amd.com
|
|
The io_alloc feature in resctrl enables system software to configure the
portion of the cache allocated for I/O traffic. When supported, the
io_alloc_cbm file in resctrl provides access to capacity bitmasks (CBMs)
allocated for I/O devices.
Enable users to modify io_alloc CBMs by writing to the io_alloc_cbm resctrl
file when the io_alloc feature is enabled.
Mirror the CBMs between CDP_CODE and CDP_DATA when CDP is enabled to present
consistent I/O allocation information to user space.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/67609641b03ccfba18a8ee0bf9dbd1f3dcbecda3.1762995456.git.babu.moger@amd.com
|
|
Introduce the "io_alloc_cbm" resctrl file to display the capacity bitmasks
(CBMs) that represent the portions of each cache instance allocated
for I/O traffic on a cache resource that supports the "io_alloc" feature.
io_alloc_cbm resides in the info directory of a cache resource, for example,
/sys/fs/resctrl/info/L3/. Since the resource name is part of the path, it
is not necessary to display the resource name as done in the schemata file.
When CDP is enabled, io_alloc routes traffic using the highest CLOSID
associated with the CDP_CODE resource and that CLOSID becomes unusable for
the CDP_DATA resource. The highest CLOSID of CDP_CODE and CDP_DATA resources
will be kept in sync to ensure consistent user interface. In preparation for
this, access the CBMs for I/O traffic through highest CLOSID of either
CDP_CODE or CDP_DATA resource.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/55a3ff66a70e7ce8239f022e62b334e9d64af604.1762995456.git.babu.moger@amd.com
|
|
AMD's SDCIAE forces all SDCI lines to be placed into the L3 cache portions
identified by the highest-supported L3_MASK_n register, where n is the maximum
supported CLOSID.
To support this, when io_alloc resctrl feature is enabled, reserve the highest
CLOSID exclusively for I/O allocation traffic making it no longer available for
general CPU cache allocation.
Introduce user interface to enable/disable io_alloc feature and encourage users
to enable io_alloc only when running workloads that can benefit from this
functionality. On enable, initialize the io_alloc CLOSID with all usable CBMs
across all the domains.
Since CLOSIDs are managed by resctrl fs, it is least invasive to make "io_alloc
is supported by maximum supported CLOSID" part of the initial resctrl fs
support for io_alloc. Take care to minimally (only in error messages) expose
this use of CLOSID for io_alloc to user space so that this is not required from
other architectures that may support io_alloc differently in the future.
When resctrl is mounted with "-o cdp" to enable code/data prioritization,
there are two L3 resources that can support I/O allocation: L3CODE and
L3DATA. From resctrl fs perspective the two resources share a CLOSID and
the architecture's available CLOSID are halved to support this.
The architecture's underlying CLOSID used by SDCIAE when CDP is enabled is the
CLOSID associated with the CDP_CODE resource, but from resctrl's perspective
there is only one CLOSID for both CDP_CODE and CDP_DATA. CDP_DATA is thus not
usable for general (CPU) cache allocation nor I/O allocation.
Keep the CDP_CODE and CDP_DATA I/O alloc status in sync to avoid any confusion
to user space. That is, enabling io_alloc on CDP_CODE does so on CDP_DATA and
vice-versa, and keep the I/O allocation CBMs of CDP_CODE and CDP_DATA in sync.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/c7d3037795e653e22b02d8fc73ca80d9b075031c.1762995456.git.babu.moger@amd.com
|
|
Introduce the "io_alloc" resctrl file to the "info" area of a cache resource,
for example /sys/fs/resctrl/info/L3/io_alloc. "io_alloc" indicates support for
the "io_alloc" feature that allows direct insertion of data from I/O
devices into the cache.
Restrict exposing support for "io_alloc" to the L3 resource that is the only
resource where this feature can be backed by AMD's L3 Smart Data Cache
Injection Allocation Enforcement (SDCIAE). With that, the "io_alloc" file is
only visible to user space if the L3 resource supports "io_alloc".
Doing so makes the file visible for all cache resources though, for example
also L2 cache (if it supports cache allocation). As a consequence, add
capability for file to report expected "enabled" and "disabled", as well as
"not supported".
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/e8b116a8f424128b227734bb1d433c14af478d90.1762995456.git.babu.moger@amd.com
|
|
Add a kernel command-line parameter to enable or disable the exposure of
the L3 Smart Data Cache Injection Allocation Enforcement (SDCIAE) hardware
feature to resctrl.
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://patch.msgid.link/c623edf7cb369ba9da966de47d9f1b666778a40e.1762995456.git.babu.moger@amd.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix register naming in the Mediatek mt8189 driver
- Select REGMAP_MMIO for the Realtek RTD driver
- Fix the number of items in groups in the Toshiba Visconti driver
- Fix a memory leak in the Cirrus CS42L43 driver
- Fix a deadlock (!) in Qualcomm pinmux configuration
- Fix use of uninitialized memory and list initialization in the S32CC
pin controller
* tag 'pinctrl-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
dt-bindings: pinctrl: xlnx,versal-pinctrl: Add missing unevaluatedProperties on '^conf' nodes
pinctrl: s32cc: initialize gpio_pin_config::list after kmalloc()
pinctrl: s32cc: fix uninitialized memory in s32_pinctrl_desc
pinctrl: qcom: msm: Fix deadlock in pinmux configuration
pinctrl: cirrus: Fix fwnode leak in cs42l43_pin_probe()
dt-bindings: pinctrl: toshiba,visconti: Fix number of items in groups
pinctrl: realtek: Select REGMAP_MMIO for RTD driver
pinctrl: mediatek: mt8189: align register base names to dt-bindings ones
pinctrl: mediatek: mt8196: align register base names to dt-bindings ones
|
|
|
|
Add documentation for longer term classification of workload type for
power or performance.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251118223620.554798-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"This one has lots of new HW entries which adds to the size in diffstat
but the individual changes are simple.
Fixes
- acer-wmi: Ignore backlight event
- alienware-wmi-wmax: Fix quirk match table order & drop redundant
entries
- amd/pmc:
- Add Xbox Ally to spurious 8042 quirk list
- Quirk list Lenovo Legion Go 2 NVMe resume
- msi-wmi-platform:
- Correct GUID to uppercase
- GUID is uncleverly copy-pasted from an example so add a DMI
whitelist
- intel/speed_select_if: PCIBIOS_* return code conversion
- intel-uncore-freq & ISST: Fix kernel doc warnings
New HW support
- alienware-wmi-wmax:
- Alienware 16 Aurora support
- Alienware M support
- Alienware X support
- Dell G support
- amd/pmc:
- ROG Xbox Ally (non-X) support
- huaway-wmi: HONOR MagicBoox X16/X14 PrintScreen & YOYO keys
- hp-wmi:
- Omen 16-wf1xxx fan support
- Omen MAX 16-ah0xx fan + thermal profile support
- Victus 16-r0 and 16-s0 fan + thermal profile support
- intel/hid: Intel Nova Lake support
- intel-uncore-freq:
- Intel Panther Lake support
- Intel Wildcat Lake support
- Intel Nova Lake support"
* tag 'platform-drivers-x86-v6.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (21 commits)
platform/x86: intel-uncore-freq: fix all header kernel-doc warnings
platform/x86: acer-wmi: Ignore backlight event
platform/x86/intel/speed_select_if: Convert PCIBIOS_* return codes to errnos
platform/x86/intel/hid: Add Nova Lake support
platform/x86: alienware-wmi-wmax: Add AWCC support to Alienware 16 Aurora
platform/x86: hp-wmi: Add Omen MAX 16-ah0xx fan support and thermal profile
platform/x86: msi-wmi-platform: Fix typo in WMI GUID
platform/x86: msi-wmi-platform: Only load on MSI devices
platform/x86/amd: pmc: Add Lenovo Legion Go 2 to pmc quirk list
platform/x86/amd/pmc: Add spurious_8042 to Xbox Ally
platform/x86/amd/pmc: Add support for Van Gogh SoC
platform/x86: alienware-wmi-wmax: Add support for the whole "G" family
platform/x86: alienware-wmi-wmax: Add support for the whole "X" family
platform/x86: alienware-wmi-wmax: Add support for the whole "M" family
platform/x86: alienware-wmi-wmax: Drop redundant DMI entries
platform/x86: alienware-wmi-wmax: Fix "Alienware m16 R1 AMD" quirk order
platform/x86: ISST: isst_if.h: fix all kernel-doc warnings
platform/x86: intel-uncore-freq: Add additional client processors
platform/x86: hp-wmi: Add Omen 16-wf1xxx fan support
platform/x86: huawei-wmi: add keys for HONOR models
...
|
|
on '^conf' nodes
Add the missing unevaluatedProperties to disallow extra properties on
the '^conf' nodes.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
And expand it to encompass all pressure pads.
Definition: "pressure pad" as used here as includes all touchpads that
use physical pressure to convert to click, without physical hinges. Also
called haptic touchpads in general parlance, Synaptics calls them
ForcePads.
Most (all?) pressure pads are currently advertised as
INPUT_PROP_BUTTONPAD. The suggestion to identify them as pressure pads
by defining the resolution on ABS_MT_PRESSURE has been in the docs since
commit 20ccc8dd38a3 ("Documentation: input: define
ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams") but few devices
provide this information.
In userspace it's thus impossible to determine whether a device is a
true pressure pad (pressure equals pressure) or a normal clickpad with
(pressure equals finger size).
Commit 7075ae4ac9db ("Input: add INPUT_PROP_HAPTIC_TOUCHPAD") introduces
INPUT_PROP_HAPTIC_TOUCHPAD but restricted it to those touchpads that
have support for userspace-controlled effects. Let's expand and rename
that definition to include all pressure pad touchpads since those that
do support FF effects can be identified by the presence of the
FF_HAPTIC bit.
This means:
- clickpad: INPUT_PROP_BUTTONPAD
- pressurepad: INPUT_PROP_BUTTONPAD + INPUT_PROP_PRESSUREPAD
- pressurepad with configurable haptics:
INPUT_PROP_BUTTONPAD + INPUT_PROP_PRESSUREPAD + FF_HAPTIC
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://patch.msgid.link/20251106114534.GA405512@tassie
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
Currently it is not possible to disable streaming mode via ptrace on SME
only systems, the interface for doing this is to write via NT_ARM_SVE but
such writes will be rejected on a system without SVE support. Enable this
functionality by allowing userspace to write SVE_PT_REGS_FPSIMD format data
via NT_ARM_SVE with the vector length set to 0 on SME only systems. Such
writes currently error since we require that a vector length is specified
which should minimise the risk that existing software is relying on current
behaviour.
Reads are not supported since I am not aware of any use case for this and
there is some risk that an existing userspace application may be confused if
it reads NT_ARM_SVE on a system without SVE. Existing kernels will return
FPSIMD formatted register state from NT_ARM_SVE if full SVE state is not
stored, for example if the task has not used SVE. Returning a vector length
of 0 would create a risk that software would try to do things like allocate
space for register state with zero sizes, while returning a vector length of
128 bits would look like SVE is supported. It seems safer to just not make
the changes to add read support.
It remains possible for userspace to detect a SME only system via the ptrace
interface only since reads of NT_ARM_SSVE and NT_ARM_ZA will succeed while
reads of NT_ARM_SVE will fail. Read/write access to the FPSIMD registers in
non-streaming mode is available via REGSET_FPR.
sve_set_common() already avoids allocating SVE storage when doing a FPSIMD
formatted write and allocating SME storage when doing a NT_ARM_SVE write so
we change the function to validate the new case and skip setting a vector
length for it.
The aim is to make a minimally invasive change, no operation that would
previously have succeeded will be affected, and we use a previously
defined interface in new circumstances rather than define completely new
ABI.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: David Spickett <david.spickett@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
|
|
With commit 1204777867e8 ("s390/debug: keep debug data on resize")
the behavior of a debug area resize operation was changed. Update the
associated documentation to reflect this change.
Fixes: 1204777867e8 ("s390/debug: keep debug data on resize")
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All changes are device-specific, and
nothing stands out.
- A regression fix for HD-audio HDMI probe
- USB-audio hardening patches for issues spotted by fuzzers
- ASoC fixes for TAS278x, SoundWire and Cirrus
- Usual HD-audio and USB-audio quirks"
* tag 'sound-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Add native DSD quirks for PureAudio DAC series
ASoC: rsnd: fix OF node reference leak in rsnd_ssiu_probe()
ALSA: hda/tas2781: Correct the wrong project ID
ALSA: usb-audio: Fix NULL pointer dereference in snd_usb_mixer_controls_badd
ASoC: SDCA: bug fix while parsing mipi-sdca-control-cn-list
ALSA: usb-audio: Fix potential overflow of PCM transfer buffer
ALSA: hda/tas2781: Add new quirk for HP new projects
ASoC: tas2781: fix getting the wrong device number
ASoC: codecs: va-macro: fix resource leak in probe error path
ASoC: tas2783A: Fix issues in firmware parsing
ASoC: sdw_utils: fix device reference leak in is_sdca_endpoint_present()
ASoC: cs4271: Fix regulator leak on probe failure
ALSA: hda/hdmi: Fix breakage at probing nvhdmi-mcp driver
ASoC: da7213: Use component driver suspend/resume
ALSA: usb-audio: add min_mute quirk for SteelSeries Arctis
ASoC: doc: cs35l56: Update firmware filename description for B0 silicon
|
|
Add documentation for Intel thermal throttling reporting events.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Subject adjustment, file name change, minor edits ]
Link: https://patch.msgid.link/20251113212104.221632-1-srinivas.pandruvada@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
|
|
vfs_mkdir() already drops the reference to the dentry on failure but it
leaves the parent locked.
This complicates end_creating() which needs to unlock the parent even
though the dentry is no longer available.
If we change vfs_mkdir() to unlock on failure as well as releasing the
dentry, we can remove the "parent" arg from end_creating() and simplify
the rules for calling it.
Note that cachefiles_get_directory() can choose to substitute an error
instead of actually calling vfs_mkdir(), for fault injection. In that
case it needs to call end_creating(), just as vfs_mkdir() now does on
error.
ovl_create_real() will now unlock on error. So the conditional
end_creating() after the call is removed, and end_creating() is called
internally on error.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: syzbot@syzkaller.appspotmail.com
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20251113002050.676694-15-neilb@ownmail.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth and Wireless. No known outstanding
regressions.
Current release - regressions:
- eth:
- bonding: fix mii_status when slave is down
- mlx5e: fix missing error assignment in mlx5e_xfrm_add_state()
Previous releases - regressions:
- sched: limit try_bulk_dequeue_skb() batches
- ipv4: route: prevent rt_bind_exception() from rebinding stale fnhe
- af_unix: initialise scc_index in unix_add_edge()
- netpoll: fix incorrect refcount handling causing incorrect cleanup
- bluetooth: don't hold spin lock over sleeping functions
- hsr: Fix supervision frame sending on HSRv0
- sctp: prevent possible shift out-of-bounds
- tipc: fix use-after-free in tipc_mon_reinit_self().
- dsa: tag_brcm: do not mark link local traffic as offloaded
- eth: virtio-net: fix incorrect flags recording in big mode
Previous releases - always broken:
- sched: initialize struct tc_ife to fix kernel-infoleak
- wifi:
- mac80211: reject address change while connecting
- iwlwifi: avoid toggling links due to wrong element use
- bluetooth: cancel mesh send timer when hdev removed
- strparser: fix signed/unsigned mismatch bug
- handshake: fix memory leak in tls_handshake_accept()
Misc:
- selftests: mptcp: fix some flaky tests"
* tag 'net-6.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (60 commits)
hsr: Follow standard for HSRv0 supervision frames
hsr: Fix supervision frame sending on HSRv0
virtio-net: fix incorrect flags recording in big mode
ipv4: route: Prevent rt_bind_exception() from rebinding stale fnhe
wifi: iwlwifi: mld: always take beacon ies in link grading
wifi: iwlwifi: mvm: fix beacon template/fixed rate
wifi: iwlwifi: fix aux ROC time event iterator usage
net_sched: limit try_bulk_dequeue_skb() batches
selftests: mptcp: join: properly kill background tasks
selftests: mptcp: connect: trunc: read all recv data
selftests: mptcp: join: userspace: longer transfer
selftests: mptcp: join: endpoints: longer transfer
selftests: mptcp: join: rm: set backup flag
selftests: mptcp: connect: fix fallback note due to OoO
ethtool: fix incorrect kernel-doc style comment in ethtool.h
mlx5: Fix default values in create CQ
Bluetooth: btrtl: Avoid loading the config file on security chips
net/mlx5e: Fix potentially misleading debug message
net/mlx5e: Fix wraparound in rate limiting for values above 255 Gbps
net/mlx5e: Fix maxrate wraparound in threshold between units
...
|
|
Update the device tree binding document for GPIO interrupt controller of
Amlogic S6 S7 and S7D SoCs.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251105-irqchip-gpio-s6-s7-s7d-v1-1-b4d1fe4781c1@amlogic.com
|
|
|
|
Instead of requiring that the caller calls iomap_finish_folio_read()
even if the ->read_folio_range() callback returns an error, account for
this internally in iomap instead, which makes the interface simpler and
makes it match writeback's ->read_folio_range() error handling
expectations.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20251111193658.3495942-6-joannelkoong@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Document that iomap_finish_folio_write() must be called after writeback
on the range completes.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20251111193658.3495942-4-joannelkoong@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
and interrupts count
Update the AST2700 interrupt controller binding to match the actual
hardware and the irq-aspeed-intc driver behavior.
- Interrupts:
First-level INTC banks request multiple interrupt lines to the root
GIC, with a maximum of 10 per bank. Second-level INTC banks request
only one interrupt line to their parent INTC-IC. Therefore, set the
interrupts property to allow a minimum of 1 and a maximum of 10
entries.
- #interrupt-cells:
Set '#interrupt-cells' to <1> since the aspeed intc driver does not
support specifying a trigger type; only the interrupt index is used.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251030060155.2342604-2-ryan_chen@aspeedtech.com
|
|
Add SSWI support for Anlogic DR1V90 SoC, which uses Nuclei UX900 with a
TIMER unit compliant with the ACLINT specification.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251021-dr1v90-basic-dt-v3-6-5478db4f664a@pigmoral.tech
|
|
Add MSWI support for Anlogic DR1V90 SoC, which uses Nuclei UX900 with a
TIMER unit compliant with the ACLINT specification.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251021-dr1v90-basic-dt-v3-5-5478db4f664a@pigmoral.tech
|
|
Add PLIC support for Anlogic DR1V90.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251021-dr1v90-basic-dt-v3-4-5478db4f664a@pigmoral.tech
|
|
Add a SHA3 kunit test suite, providing the following:
(*) A simple test of each of SHA3-224, SHA3-256, SHA3-384, SHA3-512,
SHAKE128 and SHAKE256.
(*) NIST 0- and 1600-bit test vectors for SHAKE128 and SHAKE256.
(*) Output tiling (multiple squeezing) tests for SHAKE256.
(*) Standard hash template test for SHA3-256. To make this possible,
gen-hash-testvecs.py is modified to support sha3-256.
(*) Standard benchmark test for SHA3-256.
[EB: dropped some unnecessary changes to gen-hash-testvecs.py, moved
addition of Testing section in doc file into this commit, and
other small cleanups]
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Harald Freudenberger <freude@linux.ibm.com>
Link: https://lore.kernel.org/r/20251026055032.1413733-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
CONFIG_CRYPTO_POLYVAL_ARM64_CE and CONFIG_CRYPTO_POLYVAL_CLMUL_NI no
longer exist. The architecture-optimized POLYVAL code is now just
enabled automatically when HCTR2 support is enabled. Update the fscrypt
documentation accordingly.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251109234726.638437-10-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
The WMI driver core only supports GUID strings containing only
uppercase characters, however the GUID string used by the
msi-wmi-platform driver contains a single lowercase character.
This prevents the WMI driver core from matching said driver to
its WMI device.
Fix this by turning the lowercase character into a uppercase
character. Also update the WMI driver development guide to warn
about this.
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Fixes: 9c0beb6b29e7 ("platform/x86: wmi: Add MSI WMI Platform driver")
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20251110111253.16204-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Document the Temperature Sensor (TSENS) on the Kaanapali Platform.
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251021-b4-knp-tsens-v2-1-7b662e2e71b4@oss.qualcomm.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
The Renesas RZ/V2H SoC includes a Thermal Sensor Unit (TSU) block designed
to measure the junction temperature. The device provides real-time
temperature measurements for thermal management, utilizing two dedicated
channels for temperature sensing.
The Renesas RZ/V2H SoC is using the same TSU IP found on the RZ/G3E SoC,
the only difference being that it has two channels instead of one.
Add new compatible string "renesas,r9a09g057-tsu" for RZ/V2H and use
"renesas,r9a09g047-tsu" as a fallback compatible to indicate hardware
compatibility with the RZ/G3E implementation.
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251020143107.13974-3-ovidiu.panait.rb@renesas.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- use the firmware node of the GPIO chip, not its label for software
node lookup
- fix invalid pointer access in GPIO debugfs
- drop unused functions from gpio-tb10x
- fix a regression in gpio-aggregator: restore the set_config()
callback in the driver
- correct schema $id path in ti,twl4030 DT bindings
* tag 'gpio-fixes-for-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: tb10x: Drop unused tb10x_set_bits() function
gpio: aggregator: restore the set_config operation
gpiolib: fix invalid pointer access in debugfs
gpio: swnode: don't use the swnode's name as the key for GPIO lookup
dt-bindings: gpio: ti,twl4030: Correct the schema $id path
|
|
Somehow CONFIG_PSTORE_FIRMWARE ended up in this document when I intended
it to be CONFIG_CHROMEOS_PSTORE. Correct the configuration option and
make it clear that not all options are required.
Fixes: b1f02f005a2e ("Documentation: power: Add document on debugging shutdown hangs")
Reported-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
[ rjw: Fixes: tag ]
Link: https://patch.msgid.link/20251106142524.3841343-1-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Fix typo "handul" to "handful" and remove outdated limitation
stating only generic netlink is supported (we have netlink-raw).
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20251105192908.686458-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit
199747106934 ("edac: add a new per-dimm API and make the old per-virtual-rank API obsolete")
introduced a new per-DIMM sysfs interface for EDAC making the old
per-virtual-rank sysfs interface obsolete.
Since this new sysfs interface was introduced more than a decade ago, remove
the obsolete legacy interface.
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20251106015727.1987246-1-avadhut.naik@amd.com
|
|
Add SHA-3 support to lib/crypto/. All six algorithms in the SHA-3
family are supported: four digests (SHA3-224, SHA3-256, SHA3-384, and
SHA3-512) and two extendable-output functions (SHAKE128 and SHAKE256).
The SHAKE algorithms will be required for ML-DSA.
[EB: simplified the API to use fewer types and functions, fixed bug that
sometimes caused incorrect SHAKE output, cleaned up the
documentation, dropped an ad-hoc test that was inconsistent with
the rest of lib/crypto/, and many other cleanups]
Signed-off-by: David Howells <dhowells@redhat.com>
Co-developed-by: Eric Biggers <ebiggers@kernel.org>
Tested-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20251026055032.1413733-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add caller-provided callbacks for read and readahead so that it can be
used generically, especially by filesystems that are not block-based.
In particular, this:
* Modifies the read and readahead interface to take in a
struct iomap_read_folio_ctx that is publicly defined as:
struct iomap_read_folio_ctx {
const struct iomap_read_ops *ops;
struct folio *cur_folio;
struct readahead_control *rac;
void *read_ctx;
};
where struct iomap_read_ops is defined as:
struct iomap_read_ops {
int (*read_folio_range)(const struct iomap_iter *iter,
struct iomap_read_folio_ctx *ctx,
size_t len);
void (*read_submit)(struct iomap_read_folio_ctx *ctx);
};
read_folio_range() reads in the folio range and is required by the
caller to provide. read_submit() is optional and is used for
submitting any pending read requests.
* Modifies existing filesystems that use iomap for read and readahead to
use the new API, through the new statically inlined helpers
iomap_bio_read_folio() and iomap_bio_readahead(). There is no change
in functionality for those filesystems.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Config based debug is rarely turned on and is not available easily when
things go wrong.
Provide a static branch to allow permanent integration of debug mechanisms
along with the usual toggles in Kconfig, command line and debugfs.
Requested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251027084307.089270547@linutronix.de
|
|
If the kernel hangs while shutting down, ideally a UART log should
be captured to debug the problem. However if one isn't available,
users can use the pstore functionality to retrieve logs.
Add a document explaining how this works to make it more accessible
to users.
Tested-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251025004341.2386868-1-superm1@kernel.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
intel_pstate docs uses standard reST construct (`Section title`_) for
cross-referencing sections (internal linking), rather than for external
links. Incorrect cross-references are not caught when these are written
in that syntax, however (fortunately docutils 0.22 raise duplicate
target warnings that get fixed in cb908f8b0acc7e ("Documentation:
intel_pstate: fix duplicate hyperlink target errors")).
Convert the cross-references to use :ref: directive, which doesn't
exhibit this problem.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Changelog tweak ]
Link: https://patch.msgid.link/20251101055614.32270-1-bagasdotme@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
When the device references were changed from relative to absolute in
commit e65cb011349e ("Documentation: ACPI: Fix parent device
references"), the MUX0 device was omitted from the paths.
So add it to fix the references.
Fixes: e65cb011349e ("Documentation: ACPI: Fix parent device references")
Closes: https://lore.kernel.org/all/48d0fb45-096c-4caa-b51c-753c2f17f018@gmail.com/
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20251027192628.130998-1-jonas.gorski@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Update the text for firmware file naming to show that the l?u? suffix is
supported on CS35L56 B0 silicon and ampN was only used on early firmware.
The previous version of this text only said that B0 silicon used the ampN
suffix. Since kernel 6.16 the driver supports both the old ampN and
new l?u? suffix for B0 silicon. New firmwares will use the l?u? suffix.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251103115809.33953-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The $id for a binding should match its file path. The ti,twl4030-gpio
binding is located in the gpio/ subdirectory but was missing this from
its $id.
Correct the path to follow the standard convention.
Fixes: 842dcff8e2d6 ("dt-bindings: gpio: Convert ti,twl4030-gpio to DT schema")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Fixes: 842dcff8e2d6 ("dt-bindings: gpio: Convert ti,twl4030-gpio to DT schema")
Link: https://lore.kernel.org/r/20250821194710.16043-1-jihed.chaibi.dev@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. It became slightly bigger than usual due
to timing issues (holidays, etc), but all changes are rather
device-specific fixes, so not really worrisome.
- ASoC Cirrus codec fixes for AMD
- Various fixes for ASoC Intel AVS, Qualcomm, SoundWire, FSL,
Mediatek, Renesas
- A few HD-audio quirks, and USB-audio regression fixes for Presonus"
* tag 'sound-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ALSA: hda/realtek: Enable mic on Vaio RPL
ASoC: dt-bindings: pm4125-sdw: correct number of soundwire ports
ASoC: renesas: rz-ssi: Use proper dma_buffer_pos after resume
ASoC: soc_sdw_utils: remove cs42l43 component_name
ASoC: fsl_sai: Fix sync error in consumer mode
ASoC: Fix build for sdw_utils
ALSA: hda/realtek: Fix mute led for HP Victus 15-fa1xxx (MB 8C2D)
ASoC: rt721: fix prepare clock stop failed
ALSA: usb-audio: don't log messages meant for 1810c when initializing 1824c
ASoC: mediatek: Fix double pm_runtime_disable in remove functions
ASoC: fsl_micfil: correct the endian format for DSD
ASoC: fsl_sai: fix bit order for DSD format
ASoC: Intel: avs: Use snd_codec format when initializing probe
ASoC: Intel: avs: Disable periods-elapsed work when closing PCM
ASoC: Intel: avs: Unprepare a stream when XRUN occurs
ASoC: sdw_utils: add name_prefix for rt1321 part id
ASoC: qdsp6: q6asm: do not sleep while atomic
ASoC: Intel: soc-acpi-intel-ptl-match: Remove cs42l43 match from sdw link3
ASOC: max98090/91: fix for filter configuration: AHPF removed DMIC2_HPF added
ASoC: amd: acp: Add ACP7.0 match entries for cs35l56 and cs42l43
...
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless, Bluetooth and netfilter.
Current release - regressions:
- tcp: fix too slow tcp_rcvbuf_grow() action
- bluetooth: fix corruption in h4_recv_buf() after cleanup
Previous releases - regressions:
- mptcp: restore window probe
- bluetooth:
- fix connection cleanup with BIG with 2 or more BIS
- fix crash in set_mesh_sync and set_mesh_complete
- batman-adv: release references to inactive interfaces
- nic:
- ice: fix usage of logical PF id
- sfc: fix potential memory leak in efx_mae_process_mport()
Previous releases - always broken:
- devmem: refresh devmem TX dst in case of route invalidation
- netfilter: add seqadj extension for natted connections
- wifi:
- iwlwifi: fix potential use after free in iwl_mld_remove_link()
- brcmfmac: fix crash while sending action frames in standalone AP Mode
- eth:
- mlx5e: cancel tls RX async resync request in error flows
- ixgbe: fix memory leak and use-after-free in ixgbe_recovery_probe()
- hibmcge: fix rx buf avl irq is not re-enabled in irq_handle issue
- cxgb4: fix potential use-after-free in ipsec callback
- nfp: fix memory leak in nfp_net_alloc()"
* tag 'net-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
net: sctp: fix KMSAN uninit-value in sctp_inq_pop
net: devmem: refresh devmem TX dst in case of route invalidation
net: stmmac: est: Fix GCL bounds checks
net: stmmac: Consider Tx VLAN offload tag length for maxSDU
net: stmmac: vlan: Disable 802.1AD tag insertion offload
net/mlx5e: kTLS, Cancel RX async resync request in error flows
net: tls: Cancel RX async resync request on rcd_delta overflow
net: tls: Change async resync helpers argument
net: phy: dp83869: fix STRAP_OPMODE bitmask
selftests: net: use BASH for bareudp testing
net: mctp: Fix tx queue stall
net/mlx5: Don't zero user_count when destroying FDB tables
net: usb: asix_devices: Check return value of usbnet_get_endpoints
mptcp: zero window probe mib
mptcp: restore window probe
mptcp: fix MSG_PEEK stream corruption
mptcp: drop bogus optimization in __mptcp_check_push()
netconsole: Fix race condition in between reader and writer of userdata
Documentation: netconsole: Remove obsolete contact people
nfp: xsk: fix memory leak in nfp_net_alloc()
...
|
|
Add a sysfs attribute `/sys/power/hibernate_compression_threads` to
allow runtime configuration of the number of threads used for
compressing and decompressing hibernation images.
The new sysfs interface enables dynamic adjustment at runtime:
# cat /sys/power/hibernate_compression_threads
3
# echo 4 > /sys/power/hibernate_compression_threads
This change provides greater flexibility for debugging and performance
tuning of hibernation without requiring a reboot.
Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn>
Link: https://patch.msgid.link/c68c62f97fabf32507b8794ad8c16cd22ee656ac.1761046167.git.luoxueqin@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The number of compression/decompression threads has a direct impact on
hibernate image generation and resume latency. Using more threads can
reduce overall resume time, but on systems with fewer CPU cores it may
also introduce contention and reduce efficiency.
Performance was evaluated on an 8-core ARM system, averaged over 10 runs:
Threads Hibernate(s) Resume(s)
--------------------------------
3 12.14 18.86
4 12.28 17.48
5 11.09 16.77
6 11.08 16.44
With 5–6 threads, resume latency improves by approximately 12% compared
to the default 3-thread configuration, with negligible impact on
hibernate time.
Introduce a new kernel parameter `hibernate_compression_threads=` that
allows users and integrators to tune the number of
compression/decompression threads at boot. This provides a way to
balance performance and CPU utilization across a wide range of hardware
without recompiling the kernel.
Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn>
Link: https://patch.msgid.link/f24b3ca6416e230a515a154ed4c121d72a7e05a6.1761046167.git.luoxueqin@kylinos.cn
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Breno Leitao has been listed in MAINTAINERS as netconsole maintainer
since 7c938e438c56db ("MAINTAINERS: make Breno the netconsole
maintainer"), but the documentation says otherwise that bug reports
should be sent to original netconsole authors.
Remove obsolate contact info.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251028132027.48102-1-bagasdotme@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix reST warnings in
Documentation/admin-guide/pm/intel_pstate.rst caused by missing explicit
hyperlink labels for section titles.
Before this change, the following errors were printed during
`make htmldocs`:
Documentation/admin-guide/pm/intel_pstate.rst:401:
ERROR: Indirect hyperlink target (id="id6") refers to target
"passive mode", which is a duplicate, and cannot be used as a
unique reference.
Documentation/admin-guide/pm/intel_pstate.rst:517:
ERROR: Indirect hyperlink target (id="id9") refers to target
"active mode", which is a duplicate, and cannot be used as a
unique reference.
Documentation/admin-guide/pm/intel_pstate.rst:611:
ERROR: Indirect hyperlink target (id="id15") refers to target
"global attributes", which is a duplicate, and cannot be used as
a unique reference.
ERROR: Duplicate target name, cannot be used as a unique reference:
"passive mode", "active mode", "global attributes".
These errors occurred because the sections "Active Mode",
"Active Mode With HWP", "Passive Mode", and "Global Attributes"
did not define explicit hyperlink labels. As a result, Sphinx
auto-generated duplicate anchors when the same titles appeared
multiple times within the document.
Because of this, the generated HTML documentation contained
broken references such as:
`active mode <Active Mode_>`_
`passive mode <Passive Mode_>`_
`global attributes <Global Attributes_>`_
This patch adds explicit hyperlink labels for the affected sections,
ensuring all references are unique and correctly resolved.
After applying this patch, `make htmldocs` completes without
any warnings, and all hyperlinks in intel_pstate.html render properly.
Signed-off-by: Swaraj Gaikwad <swarajgaikwad1925@gmail.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
[ rjw: Subject adjustment ]
Link: https://patch.msgid.link/20251029134737.42229-1-swarajgaikwad1925@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
For some reason we ended up limiting the number of soundwire ports to 2
in the bindings, the actual codec supports 4 rx and 5 tx ports.
Fixes: 88d0d17192c5 ("ASoC: dt-bindings: add bindings for pm4125 audio codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20251029144636.357203-1-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit 267bca002c50 ("dt-bindings: net: sparx5: correct LAN969x register
space windows") said that LAN969x has exactly two address spaces ("reg"
property) but implemented it as 2 or more. Narrow the constraint to
properly express that only two items are allowed, which also matches
Linux driver.
Fixes: 267bca002c50 ("dt-bindings: net: sparx5: correct LAN969x register space windows")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251026101741.20507-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The dpll.yaml spec incorrectly omitted module-name and clock-id from the
pin-get operation reply specification, even though the kernel DPLL
implementation has always included these attributes in pin-get responses
since the initial implementation.
This spec inconsistency caused issues with the C YNL code generator.
The generated dpll_pin_get_rsp structure was missing these fields.
Fix the spec by adding module-name and clock-id to the pin-attrs reply
specification to match the actual kernel behavior.
Fixes: 3badff3a25d8 ("dpll: spec: Add Netlink spec in YAML")
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20251024185512.363376-1-poros@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues"
* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
tcpm: switch check for role_sw device with fw_node
usb/core/quirks: Add Huawei ME906S to wakeup quirk
usb: raw-gadget: do not limit transfer length
USB: serial: option: add UNISOC UIS7720
xhci: dbc: enable back DbC in resume if it was enabled before suspend
xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event
usb: xhci-pci: Fix USB2-only root hub registration
dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100
usb: misc: Add x86 dependency for Intel USBIO driver
dt-bindings: usb: switch: split out ports definition
usb: dwc3: Don't call clk_bulk_disable_unprepare() twice
dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp
|
|
Add compatible strings for the PLIC found in UltraRISC DP1000 SoC.
The PLIC is part of the UR-CP100 core and has a hardware bug requiring
a workaround.
Signed-off-by: Charles Mirabile <cmirabil@redhat.com>
Signed-off-by: Lucas Zampieri <lzampier@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251024083647.475239-3-lzampier@redhat.com
|
|
Add vendor prefix for UltraRISC Technology Co., Ltd.
Signed-off-by: Lucas Zampieri <lzampier@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251024083647.475239-2-lzampier@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A moderately large collection of device specific changes here, mostly
fixes but also including a few new quirks and device IDs. This is all
fairly routine even for the affected devices"
* tag 'spi-fix-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: spi-rockchip: Add RK3506 compatible
spi: intel-pci: Add support for Intel Wildcat Lake SPI serial flash
spi: intel-pci: Add support for Arrow Lake-H SPI serial flash
spi: intel: Add support for 128M component density
spi: airoha: fix reading/writing of flashes with more than one plane per lun
spi: airoha: switch back to non-dma mode in the case of error
spi: airoha: add support of dual/quad wires spi modes to exec_op() handler
spi: airoha: return an error for continuous mode dirmap creation cases
spi: amlogic: fix spifc build error
spi: cadence-quadspi: Fix pm_runtime unbalance on dma EPROBE_DEFER
spi: spi-nxp-fspi: limit the clock rate for different sample clock source selection
spi: spi-nxp-fspi: add extra delay after dll locked
spi: spi-nxp-fspi: re-config the clock rate when operation require new clock rate
spi: dw-mmio: add error handling for reset_control_deassert()
spi: rockchip-sfc: Fix DMA-API usage
spi: dt-bindings: cadence: add soc-specific compatible strings for zynqmp and versal-net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can. Slim pickings, I'm guessing people haven't
really started testing.
Current release - new code bugs:
- eth: mlx5e:
- psp: avoid 'accel' NULL pointer dereference
- skip PPHCR register query for FEC histogram if not supported
Previous releases - regressions:
- bonding: update the slave array for broadcast mode
- rtnetlink: re-allow deleting FDB entries in user namespace
- eth: dpaa2: fix the pointer passed to PTR_ALIGN on Tx path
Previous releases - always broken:
- can: drop skb on xmit if device is in listen-only mode
- gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
- eth: mlx5e
- RX, fix generating skb from non-linear xdp_buff if program
trims frags
- make devcom init failures non-fatal, fix races with IPSec
Misc:
- some documentation formatting 'fixes'"
* tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5: Fix IPsec cleanup over MPV device
net/mlx5: Refactor devcom to return NULL on failure
net/mlx5e: Skip PPHCR register query if not supported by the device
net/mlx5: Add PPHCR to PCAM supported registers mask
virtio-net: zero unused hash fields
net: phy: micrel: always set shared->phydev for LAN8814
vsock: fix lock inversion in vsock_assign_transport()
ovpn: use datagram_poll_queue for socket readiness in TCP
espintcp: use datagram_poll_queue for socket readiness
net: datagram: introduce datagram_poll_queue for custom receive queues
net: bonding: fix possible peer notify event loss or dup issue
net: hsr: prevent creation of HSR device with slaves from another netns
sctp: avoid NULL dereference when chunk data buffer is missing
ptp: ocp: Fix typo using index 1 instead of i in SMA initialization loop
net: ravb: Ensure memory write completes before ringing TX doorbell
net: ravb: Enforce descriptor type ordering
net: hibmcge: select FIXED_PHY
net: dlink: use dev_kfree_skb_any instead of dev_kfree_skb
Documentation: networking: ax25: update the mailing list info.
net: gro_cells: fix lock imbalance in gro_cells_receive()
...
|
|
Drop confusing descriptions of pm_runtime_allow() and pm_runtime_forbid()
from Documentation/power/runtime_pm.rst and update the kerneldoc comments
of these functions to better explain their purpose.
Link: https://lore.kernel.org/linux-pm/08976178-298f-79d9-1d63-cff5a4e56cc3@linux.intel.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/12780841.O9o76ZdvQC@rafael.j.wysocki
|
|
The "groups" property can hold multiple entries (e.g.
toshiba/tmpv7708-rm-mbrc.dts file), so allow that by dropping incorrect
type (pinmux-node.yaml schema already defines that as string-array) and
adding constraints for items. This fixes dtbs_check warnings like:
toshiba/tmpv7708-rm-mbrc.dtb: pinctrl@24190000 (toshiba,tmpv7708-pinctrl):
pwm-pins:groups: ['pwm0_gpio16_grp', 'pwm1_gpio17_grp', 'pwm2_gpio18_grp', 'pwm3_gpio19_grp'] is too long
Fixes: 1825c1fe0057 ("pinctrl: Add DT bindings for Toshiba Visconti TMPV7700 SoC")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"All driver fixes. The big change is the storvsc one to rejig the
hyper-v channel handling to be more efficient for SMP virtual
machines"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: phy: dt-bindings: Add QMP UFS PHY compatible for Kaanapali
scsi: ufs: qcom: dt-bindings: Document the Kaanapali UFS controller
scsi: libfc: Prevent integer overflow in fc_fcp_recv_data()
scsi: qla4xxx: Fix typos in comments
scsi: storvsc: Prefer returning channel with the same CPU as on the I/O issuing CPU
|
|
Add a generic netlink spec in YAML format and autogenerate boilerplate
code using ynl-regen.sh to introduce a generic netlink for the energy
model. It allows a userspace program to read the performance domain and
its energy model. It notifies the userspace program when a performance
domain is created or deleted or its energy model is updated through a
multicast interface.
Specifically, it supports two commands:
- EM_CMD_GET_PDS: Get the list of information for all performance
domains.
- EM_CMD_GET_PD_TABLE: Get the energy model table of a performance
domain.
Also, it supports three notification events:
- EM_CMD_PD_CREATED: When a performance domain is created.
- EM_CMD_PD_DELETED: When a performance domain is deleted.
- EM_CMD_PD_UPDATED: When the energy model table of a performance domain
is updated.
Finally, update MAINTAINERS to include new files.
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20251020220914.320832-4-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The SPI controller found in the RK3506 SoC is still compatible to the
original one introduced with the RK3066, so add the RK3506 compatible
to the list of its variants.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251022004200.204276-1-heiko@sntech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SCIF instances on R-Car Gen5 have a single interrupt, just like on
other R-Car SoCs.
Fixes: 6ac1d60473727931 ("dt-bindings: serial: sh-sci: Document r8a78000 bindings")
Cc: stable <stable@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/09bc9881b31bdb948ce8b69a2b5acf633f5505a4.1759920441.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update the mailing list subscription information for the linux-hams
mailing list.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251020052716.3136773-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
read_seqbegin_or_lock/need_seqretry
The comments and pseudo code in Documentation/locking/seqlock.rst are wrong:
int seq = 0;
do {
read_seqbegin_or_lock(&foo_seqlock, &seq);
/* ... [[read-side critical section]] ... */
} while (need_seqretry(&foo_seqlock, seq));
read_seqbegin_or_lock() always returns with an even "seq" and need_seqretry()
doesn't change this counter. This means that seq is always even and thus the
locking pass is simply impossible.
IOW, "_or_lock" has no effect and this code doesn't differ from
do {
seq = read_seqbegin(&foo_seqlock);
/* ... [[read-side critical section]] ... */
} while (read_seqretry(&foo_seqlock, seq));
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
coccinelle
Nothing to look at apart from iput_final().
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rustfmt fixes from Miguel Ojeda:
"Rust 'rustfmt' cleanup
'rustfmt', by default, formats imports in a way that is prone to
conflicts while merging and rebasing, since in some cases it condenses
several items into the same line.
Document in our guidelines that we will handle this for the moment
with the trailing empty comment workaround and make the tree
'rustfmt'-clean again"
* tag 'rust-rustfmt' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: bitmap: fix formatting
rust: cpufreq: fix formatting
rust: alloc: employ a trailing comment to keep vertical layout
docs: rust: add section on imports formatting
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of ZCR_EL2 in NV VMs
- Pick the correct translation regime when doing a PTW on the back of
a SEA
- Prevent userspace from injecting an event into a vcpu that isn't
initialised yet
- Move timer save/restore to the sysreg handling code, fixing EL2
timer access in the process
- Add FGT-based trapping of MDSCR_EL1 to reduce the overhead of debug
- Fix trapping configuration when the host isn't GICv3
- Improve the detection of HCR_EL2.E2H being RES1
- Drop a spurious 'break' statement in the S1 PTW
- Don't try to access SPE when owned by EL3
Documentation updates:
- Document the failure modes of event injection
- Document that a GICv3 guest can be created on a GICv5 host with
FEAT_GCIE_LEGACY
Selftest improvements:
- Add a selftest for the effective value of HCR_EL2.AMO
- Address build warning in the timer selftest when building with
clang
- Teach irqfd selftests about non-x86 architectures
- Add missing sysregs to the set_id_regs selftest
- Fix vcpu allocation in the vgic_lpi_stress selftest
- Correctly enable interrupts in the vgic_lpi_stress selftest
x86:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test
for the bug fixed by commit 3ccbf6f47098 ("KVM: x86/mmu: Return
-EAGAIN if userspace deletes/moves memslot during prefault")
- Don't try to get PMU capabilities from perf when running a CPU with
hybrid CPUs/PMUs, as perf will rightly WARN.
guest_memfd:
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a
more generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to
explicitly set said flag to initialize memory as SHARED,
irrespective of MMAP.
The behavior merged in 6.18 is that enabling mmap() implicitly
initializes memory as SHARED, which would result in an ABI
collision for x86 CoCo VMs as their memory is currently always
initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with
private memory, to enable testing such setups, i.e. to hopefully
flush out any other lurking ABI issues before 6.18 is officially
released.
- Add testcases to the guest_memfd selftest to cover guest_memfd
without MMAP, and host userspace accesses to mmap()'d private
memory"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
arm64: Revamp HCR_EL2.E2H RES1 detection
KVM: arm64: nv: Use FGT write trap of MDSCR_EL1 when available
KVM: arm64: Compute per-vCPU FGTs at vcpu_load()
KVM: arm64: selftests: Fix misleading comment about virtual timer encoding
KVM: arm64: selftests: Add an E2H=0-specific configuration to get_reg_list
KVM: arm64: selftests: Make dependencies on VHE-specific registers explicit
KVM: arm64: Kill leftovers of ad-hoc timer userspace access
KVM: arm64: Fix WFxT handling of nested virt
KVM: arm64: Move CNT*CT_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CVAL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Move CNT*_CTL_EL0 userspace accessors to generic infrastructure
KVM: arm64: Add timer UAPI workaround to sysreg infrastructure
KVM: arm64: Make timer_set_offset() generally accessible
KVM: arm64: Replace timer context vcpu pointer with timer_id
KVM: arm64: Introduce timer_context_to_vcpu() helper
KVM: arm64: Hide CNTHV_*_EL2 from userspace for nVHE guests
Documentation: KVM: Update GICv3 docs for GICv5 hosts
KVM: arm64: gic-v3: Only set ICH_HCR traps for v2-on-v3 or v3 guests
KVM: arm64: selftests: Actually enable IRQs in vgic_lpi_stress
KVM: arm64: selftests: Allocate vcpus with correct size
...
|
|
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f47098 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
|
|
reattach-vf.sh code blocks marker
cloud-ifupdown-helper patch and reattach-vf.sh script are rendered in
htmldocs output as normal paragraphs instead of literal code blocks
due to missing separator from respective code block marker. Add it.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251016093936.29442-2-bagasdotme@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All changes are rather boring
device-specific fixes and quirks:
- A few fixes for missing NULL checks
- ASoC NAU8821 fixes for jack and irq handling
- Various fixes for ASoC TAS2781, IDT821034, sc8280xp, max9809x,
wcd938x, and SoundWire
- Usual HD-audio and USB-audio quirks"
* tag 'sound-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
ALSA: hda/realtek: Fix mute led for HP Omen 17-cb0xxx
ALSA: usb-audio: fix vendor quirk for Logitech H390
ALSA: usb-audio: add volume quirks for MS LifeChat LX-3000
ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails
ASoC: max98090/91: fixed max98091 ALSA widget powering up/down
ASoC: dt-bindings: Add compatible string fsl,imx-audio-tlv320
ASoC: codecs: wcd938x-sdw: remove redundant runtime pm calls
ASoC: sdw_utils: add rt1321 part id to codec_info_list
ALSA: usb-audio: Fix NULL pointer deference in try_to_register_card
ALSA: firewire: amdtp-stream: fix enum kernel-doc warnings
ALSA: usb-audio: add mixer_playback_min_mute quirk for Logitech H390
ASoC: nau8821: Avoid unnecessary blocking in IRQ handler
ASoC: nau8821: Add DMI quirk to bypass jack debounce circuit
ASoC: nau8821: Consistently clear interrupts before unmasking
ASoC: nau8821: Generalize helper to clear IRQ status
ASoC: nau8821: Cancel jdet_work before handling jack ejection
ASoC: codecs: Fix gain setting ranges for Renesas IDT821034 codec
ASoC: tas2781: Update ti,tas2781.yaml for adding tas58xx
ASoC: tas2781: Support more newly-released amplifiers tas58xx in the driver
ASoC: qcom: sc8280xp: Add support for QCS615
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- PM cleanup after all prerequisites are merged with rc1
- usbio: missing addition after all dependencies are in
- slimpro: DT binding schema conversion
* tag 'i2c-for-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: Convert apm,xgene-slimpro-i2c to DT schema
i2c: usbio: Add ACPI device-id for MTL-CVF devices
i2c: Remove redundant pm_runtime_mark_last_busy() calls
|
|
`rustfmt`, by default, formats imports in a way that is prone to conflicts
while merging and rebasing, since in some cases it condenses several
items into the same line.
For instance, Linus mentioned [1] that the following case:
use crate::{
fmt,
page::AsPageIter,
};
is compressed by `rustfmt` into:
use crate::{fmt, page::AsPageIter};
which is undesirable.
Similarly, `rustfmt` may put several items in the same line even if the
braces span already multiple lines, e.g.:
use kernel::{
acpi, c_str,
device::{property, Core},
of, platform,
};
The options that control the formatting behavior around imports are
generally unstable, and `rustfmt` releases do not allow to use nightly
features, unlike the compiler and other Rust tooling [2].
For the moment, we can introduce a workaround to prevent `rustfmt`
from compressing the example above -- the "trailing empty comment":
use crate::{
fmt,
page::AsPageIter, //
};
which is reminiscent of the trailing comma behavior in other formatters.
We already used empty comments for formatting purposes in the past,
e.g. in commit b9b701fce49a ("rust: clarify the language unstable features
in use").
In addition, `rustfmt` actually reformats with a vertical layout (i.e. it
does not put two items in the same line) when seeing such a comment,
i.e. it doesn't just preserve the formatting, which is good in the sense
that we can use it to easily reformat some imports, since it matches
the style we generally want to have.
A Git merge driver would help (suggested by Gary and Wedson), though
maintainers would need to set it up, the diffs would still be larger
and the formatting rules for imports would remain hard to predict.
Thus document the style that we will follow in the coding guidelines
by introducing a new section and explain how the trailing empty comment
works there too.
We discussed the issue with upstream Rust in our usual Rust <-> Rust
for Linux meeting [3], and there have also been a few other discussions
in parallel in issues [4][5] and Zulip [6]. We will see what happens,
but upstream Rust has already created a subteam of `rustfmt` to try
to overcome the bandwidth issue [7], which is a good signal, and some
organization work has already started (e.g. tracking issues). We will
continue our discussions with them about it.
Cc: Caleb Cartwright <caleb.cartwright@outlook.com>
Cc: Yacin Tmimi <yacintmimi@gmail.com>
Cc: Manish Goregaokar <manishsmail@gmail.com>
Cc: Deadbeef <ent3rm4n@gmail.com>
Cc: Cameron Steffen <cam.steffen94@gmail.com>
Cc: Jieyou Xu <jieyouxu@outlook.com>
Link: https://lore.kernel.org/all/CAHk-=wgO7S_FZUSBbngG5vtejWOpzDfTTBkVvP3_yjJmFddbzA@mail.gmail.com/ [1]
Link: https://github.com/rust-lang/rustfmt/issues/4884 [2]
Link: https://hackmd.io/iSCyY3JTTz-g8YM-nnzTTA [3]
Link: https://github.com/rust-lang/rustfmt/issues/4991 [4]
Link: https://github.com/rust-lang/rustfmt/issues/3361 [5]
Link: https://rust-lang.zulipchat.com/#narrow/channel/392734-council/topic/rustfmt.20maintenance/near/543815381 [6]
Link: https://github.com/rust-lang/team/pull/2017 [7]
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Packet format for checksum offload header v5 and aggregation, and header
type table for the former, are shown in normal paragraphs instead.
Use appropriate markup.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251015092540.32282-2-bagasdotme@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN
Current release - regressions:
- udp: do not use skb_release_head_state() before
skb_attempt_defer_free()
- gro_cells: use nested-BH locking for gro_cell
- dpll: zl3073x: increase maximum size of flash utility
Previous releases - regressions:
- core: fix lockdep splat on device unregister
- tcp: fix tcp_tso_should_defer() vs large RTT
- tls:
- don't rely on tx_work during send()
- wait for pending async decryptions if tls_strp_msg_hold fails
- can: j1939: add missing calls in NETDEV_UNREGISTER notification
handler
- eth: lan78xx: fix lost EEPROM write timeout in
lan78xx_write_raw_eeprom
Previous releases - always broken:
- ip6_tunnel: prevent perpetual tunnel growth
- dpll: zl3073x: handle missing or corrupted flash configuration
- can: m_can: fix pm_runtime and CAN state handling
- eth:
- ixgbe: fix too early devlink_free() in ixgbe_remove()
- ixgbevf: fix mailbox API compatibility
- gve: Check valid ts bit on RX descriptor before hw timestamping
- idpf: cleanup remaining SKBs in PTP flows
- r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H"
* tag 'net-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
udp: do not use skb_release_head_state() before skb_attempt_defer_free()
net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset
netdevsim: set the carrier when the device goes up
selftests: tls: add test for short splice due to full skmsg
selftests: net: tls: add tests for cmsg vs MSG_MORE
tls: don't rely on tx_work during send()
tls: wait for pending async decryptions if tls_strp_msg_hold fails
tls: always set record_type in tls_process_cmsg
tls: wait for async encrypt in case of error during latter iterations of sendmsg
tls: trim encrypted message to match the plaintext on short splice
tg3: prevent use of uninitialized remote_adv and local_adv variables
MAINTAINERS: new entry for IPv6 IOAM
gve: Check valid ts bit on RX descriptor before hw timestamping
net: core: fix lockdep splat on device unregister
MAINTAINERS: add myself as maintainer for b53
selftests: net: check jq command is supported
net: airoha: Take into account out-of-order tx completions in airoha_dev_xmit()
tcp: fix tcp_tso_should_defer() vs large RTT
r8152: add error handling in rtl8152_driver_init
usbnet: Fix using smp_processor_id() in preemptible code warnings
...
|
|
Merge series from Le Qi <le.qi@oss.qualcomm.com>:
This patch series adds support for the QCS615 sound card:
- Updates device tree bindings for SM8250 to include QCS615.
- Adds QCS615 support in the SC8280XP ASoC driver.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-10-14
The first 2 paches are by Celeste Liu and target the gS_usb driver.
The first patch remove the limitation to 3 CAN interface per USB
device. The second patch adds the missing population of
net_device->dev_port.
The next 4 patches are by me and fix the m_can driver. They add a
missing pm_runtime_disable(), fix the CAN state transition back to
Error Active and fix the state after ifup and suspend/resume.
Another patch by me targets the m_can driver, too and replaces Dong
Aisheng's old email address.
The next 2 patches are by Vincent Mailhol and update the CAN
networking Documentation.
Tetsuo Handa contributes the last patch that add missing cleanup calls
in the NETDEV_UNREGISTER notification handler.
* tag 'linux-can-fixes-for-6.18-20251014' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: j1939: add missing calls in NETDEV_UNREGISTER notification handler
can: add Transmitter Delay Compensation (TDC) documentation
can: remove false statement about 1:1 mapping between DLC and length
can: m_can: replace Dong Aisheng's old email address
can: m_can: fix CAN state in system PM
can: m_can: m_can_chip_config(): bring up interface in correct state
can: m_can: m_can_handle_state_errors(): fix CAN state transition to Error Active
can: m_can: m_can_plat_remove(): add missing pm_runtime_disable()
can: gs_usb: gs_make_candev(): populate net_device->dev_port
can: gs_usb: increase max interface to U8_MAX
====================
Link: https://patch.msgid.link/20251014122140.990472-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add compatible string fsl,imx-audio-tlv320 to fix below CHECK_DTBS warning:
arch/arm/boot/dts/nxp/imx/imx6dl-gw5903.dtb: /sound: failed to match any schema with compatible: ['fsl,imx-audio-tlv320']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20251010160321.2130093-1-Frank.Li@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bug fixes from Ted Ts'o:
- Fix regression caused by removing CONFIG_EXT3_FS when testing some
very old defconfigs
- Avoid a BUG_ON when opening a file on a maliciously corrupted file
system
- Avoid mm warnings when freeing a very large orphan file metadata
- Avoid a theoretical races between metadata writeback and checkpoints
(it's very hard to hit in practice, since the race requires that the
writeback take a very long time)
* tag 'ext4_for_linus-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
Use CONFIG_EXT4_FS instead of CONFIG_EXT3_FS in all of the defconfigs
ext4: free orphan info with kvfree
ext4: detect invalid INLINE_DATA + EXTENTS flag combination
ext4, doc: fix and improve directory hash tree description
ext4: wait for ongoing I/O to complete before freeing blocks
jbd2: ensure that all ongoing I/O complete before freeing blocks
|
|
Convert APM X-Gene slimpro-i2c binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Pull in outstanding SCSI fixes for 6.18.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Back in 2021, support for CAN TDC was added to the kernel in series [1]
and in iproute2 in series [2]. However, the documentation was never
updated.
Add a new sub-section under CAN-FD driver support to document how to
configure the TDC using the "ip tool".
[1] add the netlink interface for CAN-FD Transmitter Delay Compensation (TDC)
Link: https://lore.kernel.org/all/20210918095637.20108-1-mailhol.vincent@wanadoo.fr/
[2] iplink_can: cleaning, fixes and adding TDC support
Link: https://lore.kernel.org/all/20211103164428.692722-1-mailhol.vincent@wanadoo.fr/
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251013-can-fd-doc-v2-2-5d53bdc8f2ad@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The CAN-FD section of can.rst still states that there is a 1:1 mapping
between the Classical CAN DLC and its length. This is only true for
the DLC values up to 8. Beyond that point, the length remains at 8.
For reference, the mapping between the CAN DLC and the length is given
in below table [1]:
DLC value CBFF and CEFF FBFF and FEFF
[decimal] [byte] [byte]
----------------------------------------------
0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 8 12
10 8 16
11 8 20
12 8 24
13 8 32
14 8 48
15 8 64
Remove the erroneous statement. Instead just state that the length of
a Classical CAN frame ranges from 0 to 8.
[1] ISO 11898-1:2024, Table 5 -- DLC: coding of the four LSB
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251013-can-fd-doc-v2-1-5d53bdc8f2ad@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
GICv5 hosts optionally include FEAT_GCIE_LEGACY, which allows them to
execute GICv3-based VMs on GICv5 hardware. Update the GICv3
documentation to reflect this now that GICv3 guests are supports on
compatible GICv5 hosts.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM rejects calls to KVM_{GET,SET}_VCPU_EVENTS for an uninitialized vCPU
as of commit cc96679f3c03 ("KVM: arm64: Prevent access to vCPU events
before init"). Update the corresponding API documentation.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Ensure my CI has a sensible baseline.
|
|
Update ti,tas2781.yaml for adding TAS5802/TAS5815/TAS5828.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20251002072925.26242-2-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add bindings for QCS615 sound card, which looks fully
compatible with existing SM8250.
Signed-off-by: Le Qi <le.qi@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251009090619.1097388-2-le.qi@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the missing multiport controller binding to target list.
Fix minItems for interrupt-names to avoid the following error on High
Speed controller:
usb@a200000: interrupt-names: ['dwc_usb3', 'pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
Fixes: 6e762f7b8edc ("dt-bindings: usb: Introduce qcom,snps-dwc3")
Cc: stable@vger.kernel.org
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ports definition currently defined in the usb-switch.yaml
fits standards devices which are either recipient of altmode
muxing and orientation switching events or an element of the
USB Super Speed data lanes.
This doesn't necessarely fit combo PHYs like the Qualcomm
USB3/DP Combo which has a different ports representation.
Move the ports definition to a separate usb-switch-ports.yaml
and reference it next to the usb-switch.yaml, except for
the Qualcomm USB3/DP Combo PHY bindings.
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/175462129176.394940.16810637795278334342.robh@kernel.org/
Fixes: 3bad7fe22796 ("dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Reference usb-switch.yaml to allow mode-switch")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Only i.MX8MP need dma-range property to let USB controller work properly.
Remove dma-range from required list and add limitation for imx8mp.
Fixes: d2a704e29711 ("dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings")
Cc: stable <stable@kernel.org>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This sysctl is not per interface; it's global per netns.
Fixes: 292ecd9f5a94 ("doc: move seg6_flowlabel to seg6-sysctl.rst")
Reported-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"This cycle, we have a new RTC driver, for the SpacemiT P1. The optee
driver gets alarm support. We also get a fix for a race condition that
was fairly rare unless while stress testing the alarms.
Subsystem:
- Fix race when setting alarm
- Ensure alarm irq is enabled when UIE is enabled
- remove unneeded 'fast_io' parameter in regmap_config
New driver:
- SpacemiT P1 RTC
Drivers:
- efi: Remove wakeup functionality
- optee: add alarms support
- s3c: Drop support for S3C2410
- zynqmp: Restore alarm functionality after kexec transition"
* tag 'rtc-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (29 commits)
rtc: interface: Ensure alarm irq is enabled when UIE is enabled
rtc: tps6586x: Fix initial enable_irq/disable_irq balance
rtc: cpcap: Fix initial enable_irq/disable_irq balance
rtc: isl12022: Fix initial enable_irq/disable_irq balance
rtc: interface: Fix long-standing race when setting alarm
rtc: pcf2127: fix watchdog interrupt mask on pcf2131
rtc: zynqmp: Restore alarm functionality after kexec transition
rtc: amlogic-a4: Optimize global variables
rtc: sd2405al: Add I2C address.
rtc: Kconfig: move symbols to proper section
rtc: optee: make optee_rtc_pm_ops static
rtc: optee: Fix error code in optee_rtc_read_alarm()
rtc: optee: fix error code in probe()
dt-bindings: rtc: Convert apm,xgene-rtc to DT schema
rtc: spacemit: support the SpacemiT P1 RTC
rtc: optee: add alarm related rtc ops to optee rtc driver
rtc: optee: remove unnecessary memory operations
rtc: optee: fix memory leak on driver removal
rtc: x1205: Fix Xicor X1205 vendor prefix
dt-bindings: rtc: Fix Xicor X1205 vendor prefix
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more x86 updates from Borislav Petkov:
- Remove a bunch of asm implementing condition flags testing in KVM's
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled
kernels in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
* tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86,retpoline: Optimize patch_retpoline()
x86,ibt: Use UDB instead of 0xEA
x86/cfi: Remove __noinitretpoline and __noretpoline
x86/cfi: Add "debug" option to "cfi=" bootparam
x86/cfi: Standardize on common "CFI:" prefix for CFI reports
x86/cfi: Document the "cfi=" bootparam options
x86/traps: Clarify KCFI instruction layout
compiler_types.h: Move __nocfi out of compiler-specific header
objtool: Validate kCFI calls
x86/fred: KVM: VMX: Always use FRED for IRQs when CONFIG_X86_FRED=y
x86/fred: Play nice with invoking asm_fred_entry_from_kvm() on non-FRED hardware
x86/fred: Install system vector handlers even if FRED isn't fully enabled
x86/hyperv: Use direct call to hypercall-page
x86/hyperv: Clean up hv_do_hypercall()
KVM: x86: Remove fastops
KVM: x86: Convert em_salc() to C
KVM: x86: Introduce EM_ASM_3WCL
KVM: x86: Introduce EM_ASM_1SRC2
KVM: x86: Introduce EM_ASM_2CL
KVM: x86: Introduce EM_ASM_2W
...
|
|
Add a guest_memfd flag to allow userspace to state that the underlying
memory should be configured to be initialized as shared, and reject user
page faults if the guest_memfd instance's memory isn't shared. Because
KVM doesn't yet support in-place private<=>shared conversions, all
guest_memfd memory effectively follows the initial state.
Alternatively, KVM could deduce the initial state based on MMAP, which for
all intents and purposes is what KVM currently does. However, implicitly
deriving the default state based on MMAP will result in a messy ABI when
support for in-place conversions is added.
For x86 CoCo VMs, which don't yet support MMAP, memory is currently private
by default (otherwise the memory would be unusable). If MMAP implies
memory is shared by default, then the default state for CoCo VMs will vary
based on MMAP, and from userspace's perspective, will change when in-place
conversion support is added. I.e. to maintain guest<=>host ABI, userspace
would need to immediately convert all memory from shared=>private, which
is both ugly and inefficient. The inefficiency could be avoided by adding
a flag to state that memory is _private_ by default, irrespective of MMAP,
but that would lead to an equally messy and hard to document ABI.
Bite the bullet and immediately add a flag to control the default state so
that the effective behavior is explicit and straightforward.
Fixes: 3d3a04fad25a ("KVM: Allow and advertise support for host mmap() on guest_memfd files")
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rework the not-yet-released KVM_CAP_GUEST_MEMFD_MMAP into a more generic
KVM_CAP_GUEST_MEMFD_FLAGS capability so that adding new flags doesn't
require a new capability, and so that developers aren't tempted to bundle
multiple flags into a single capability.
Note, kvm_vm_ioctl_check_extension_generic() can only return a 32-bit
value, but that limitation can be easily circumvented by adding e.g.
KVM_CAP_GUEST_MEMFD_FLAGS2 in the unlikely event guest_memfd supports more
than 32 flags.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Allow child nodes on renesas-bsc bus binding
- Drop node name pattern on allwinner,sun50i-a64-de2 bus binding
- Switch DT patchwork to kernel.org from ozlabs.org
- Fix some typos in docs and bindings
- Fix reference count in PCI node unittest
* tag 'devicetree-fixes-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: bus: renesas-bsc: allow additional properties
dt-bindings: bus: allwinner,sun50i-a64-de2: don't check node names
MAINTAINERS: Move DT patchwork to kernel.org
of: unittest: Fix device reference count leak in of_unittest_pci_node_verify
of: doc: Fix typo in doc comments.
dt-bindings: mmc: Correct typo "upto" to "up to"
|
|
Allow additional properties to enable devices attached to the bus.
Fixes warnings like these:
arch/arm/boot/dts/renesas/sh73a0-kzm9g.dtb: bus@fec10000 (renesas,bsc-sh73a0): Unevaluated properties are not allowed ('ethernet@10000000' was unexpected)
arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dtb: bus@fec10000 (renesas,bsc-r8a73a4): Unevaluated properties are not allowed ('ethernet@8000000', 'flash@0' were unexpected)
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Node names are already and properly checked by the core schema. No need
to do it again.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
[robh: Also drop [A-F] in unit address]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Some of the details about how directory hash trees work were confusing or
outright wrong, this patch should fix those.
A note on dx_tail's dt_reserved member, as far as I can tell the kernel
never sets this explicitly, so its content is apparently left-overs from
what was there before (for the dx_root I've seen remnants of a
ext4_dir_entry_tail struct from when the dir was not yet a hash dir).
Signed-off-by: Zeno Endemann <zeno.endemann@mailbox.org>
Message-ID: <20250925152435.22749-1-zeno.endemann@mailbox.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few more small fixes for 6.18-rc1.
Most of changes are about ASoC Intel and SOF drivers, while a few
other device-specific fixes are found for HD-audio, USB-audio, ASoC
RT722VB and Meson"
* tag 'sound-fix-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: rt722: add settings for rt722VB
ASoC: meson: aiu-encoder-i2s: fix bit clock polarity
ALSA: usb: fpc: replace kmalloc_array followed by copy_from_user with memdup_array_user
ALSA: hda/tas2781: Enable init_profile_id for device initialization
ALSA: emu10k1: Fix typo in docs
ALSA: hda/realtek: Add quirk for ASUS ROG Zephyrus Duo
ASoC: SOF: Intel: Read the LLP via the associated Link DMA channel
ASoC: SOF: ipc4-pcm: do not report invalid delay values
ASoC: SOF: sof-audio: add dev_dbg_ratelimited wrapper
ASoC: SOF: Intel: hda-pcm: Place the constraint on period time instead of buffer time
ASoC: SOF: ipc4-topology: Account for different ChainDMA host buffer size
ASoC: SOF: ipc4-topology: Correct the minimum host DMA buffer size
ASoC: SOF: ipc4-pcm: fix start offset calculation for chain DMA
ASoC: SOF: ipc4-pcm: fix delay calculation when DSP resamples
ASoC: SOF: ipc3-topology: Fix multi-core and static pipelines tear down
ALSA: hda/hdmi: Add pin fix for HP ProDesk model
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Beside the usual bunch of smaller bug fixes, the majority of changes
were by Zsolt Kajtar to improve the s3fb driver.
Bug fixes:
- Bounds checking to fix vmalloc-out-of-bounds (Albin Babu Varghese)
- Fix logic error in "offb" name match (Finn Thain)
- simplefb: Fix use after free in (Janne Grunau)
- s3fb: Various fixes and powersave improvements (Zsolt Kajtar)
Enhancements & code cleanups:
- Various fixes in the documentation (Bagas Sanjaya)
- Use string choices helpers (Chelsy Ratnawat)
- xenfb: Use vmalloc_array to simplify code (Qianfeng Rong)
- mb862xxfb: use signed type for error codes (Qianfeng Rong)
- Make drivers depend on LCD_CLASS_DEVICE (Thomas Zimmermann)
- radeonfb: Remove stale product link in Kconfig (Sukrut Heroorkar)"
* tag 'fbdev-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Fix logic error in "offb" name match
fbdev: Add bounds checking in bit_putcs to fix vmalloc-out-of-bounds
fbdev: Make drivers depend on LCD_CLASS_DEVICE
fbdev: radeonfb: Remove stale product link in Kconfig
Documentation: fb: Retitle driver docs
Documentation: fb: ep93xx: Demote section headings
Documentation: fb: Split toctree
fbdev: simplefb: Fix use after free in simplefb_detach_genpds()
fbdev: s3fb: Revert mclk stop in suspend
fbdev: mb862xxfb: Use int type to store negative error codes
fbdev: Use string choices helpers
fbdev: core: Fix ubsan warning in pixel_to_pat
fbdev: s3fb: Implement 1 and 2 BPP modes, improve 4 BPP
fbdev: s3fb: Implement powersave for S3 FB
fbdev: xenfb: Use vmalloc_array to simplify code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
- Second part of rtl9300 updates since dependencies are in now:
- general cleanups
- implement block read/write support
- add RTL9310 support
- DT schema conversion of hix5hd2 binding
- namespace cleanup for i2c-algo-pca
- minor simplification for mt65xx
* tag 'i2c-for-6.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: hisilicon,hix5hd2: convert to DT schema
i2c: mt65xx: convert set_speed function to void
i2c: rename wait_for_completion callback to wait_for_completion_cb
i2c: rtl9300: add support for RTL9310 I2C controller
dt-bindings: i2c: realtek,rtl9301-i2c: extend for RTL9310 support
i2c: rtl9300: use scoped guard instead of explicit lock/unlock
i2c: rtl9300: separate xfer configuration and execution
i2c: rtl9300: do not set read mode on every transfer
i2c: rtl9300: move setting SCL frequency to config_io
i2c: rtl9300: rename internal sda_pin to sda_num
dt-bindings: i2c: realtek,rtl9301-i2c: fix wording and typos
i2c: rtl9300: use regmap fields and API for registers
i2c: rtl9300: Implement I2C block read and write
|
|
Convert the Devicetree binding documentation for hisilicon,hix5hd2-i2c
from plain text to DT binding schema.
Signed-off-by: Kael D'Alcamo <dev@kael-k.io>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- Qualcomm: add Glymur CPUCP mailbox binding
- Xilinx Zynq: misc cleanup
- MediaTek:
- add new GPUEB mailbox driver
- cmdq: remove pm_runtime calls from send_data
- gce: make clock-names optional
- misc:
- change mailbox-altera maintainer
- remove redundant 'fast_io' in regmap_config
- mhuv3: Remove no_free_ptr
* tag 'mailbox-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: mtk-cmdq: Remove pm_runtime APIs from cmdq_mbox_send_data()
mailbox: add MediaTek GPUEB IPI mailbox
dt-bindings: mailbox: Add MT8196 GPUEB Mailbox
mailbox: zynqmp-ipi: Fix SGI cleanup on unbind
mailbox: zynqmp-ipi: Fix out-of-bounds access in mailbox cleanup loop
mailbox: zynqmp-ipi: Remove dev.parent check in zynqmp_ipi_free_mboxes
mailbox: zynqmp-ipi: Remove redundant mbox_controller_unregister() call
mailbox: remove unneeded 'fast_io' parameter in regmap_config
dt-bindings: mailbox: mediatek,gce-mailbox: Make clock-names optional
dt-bindings: mailbox: qcom: Document Glymur CPUCP mailbox controller binding
MAINTAINERS: Change mailbox-altera maintainer
mailbox: arm_mhuv3: Remove no_free_ptr() to maintain the original form of the pointer
|
|
Pull more VFIO updates from Alex Williamson:
- Optimizations for DMA map and unmap opertions through the type1 vfio
IOMMU backend.
This uses various means of batching and hints from the mm structures
to improve efficiency and therefore performance, resulting in a
significant speedup for huge page use cases (Li Zhe)
- Expose supported device migration features through debugfs (Cédric Le
Goater)
* tag 'vfio-v6.18-rc1-pt2' of https://github.com/awilliam/linux-vfio:
vfio: Dump migration features under debugfs
vfio/type1: optimize vfio_unpin_pages_remote()
vfio/type1: introduce a new member has_rsvd for struct vfio_dma
vfio/type1: batch vfio_find_vpfn() in function vfio_unpin_pages_remote()
vfio/type1: optimize vfio_pin_pages_remote()
mm: introduce num_pages_contiguous()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- Conversions to yaml/json schema and fixes for input-related device
tree bindings
- New drivers:
- Awinic AW86927 haptic chip
- Hynitron CST816x series controller
- Himax HX852x(ES) touchscreen controller
- Fix uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- Prevent overflow in pressure calculation in tsc2007 driver causing
phantom touches
- Make the Atmel maxTouch driver support generic touchscreen
configuration (flip, rotate, etc)
- Drop support for platform data in tca8418_keypad, pxa27x-keypad,
spear-keyboard and twl4030_keypad drivers, they all now rely on
generic device properties for configuration
- Other assorted changes and fixes
* tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits)
Input: atmel_mxt_ts - allow reset GPIO to sleep
Input: aw86927 - fix error code in probe()
Input: psxpad-spi - add a check for the return value of spi_setup()
Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak
Input: aw86927 - add driver for Awinic AW86927
dt-bindings: input: Add Awinic AW86927
dt-bindings: touchscreen: remove touchscreen.txt
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add touchscreen child node
dt-bindings: touchscreen: convert eeti bindings to json schema
Input: pm8941-pwrkey - disable wakeup for resin by default
dt-bindings: input: pm8941-pwrkey: Document wakeup-source property
Input: add driver for Hynitron CST816x series
dt-bindings: input: touchscreen: add hynitron cst816x series
Input: imx6ul_tsc - set glitch threshold by DTS property
dt-bindings: touchscreen: fsl,imx6ul-tsc: support glitch thresold
dt-bindings: touchscreen: add debounce-delay-us property
Input: ps2-gpio - fix typo
Input: atmel_mxt_ts - add support for generic touchscreen configurations
dt-bindings: input: maxtouch: add common touchscreen properties
dt-bindings: touchscreen: convert zet6223 bindings to json schema
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are cpufreq fixes and cleanups on top of the material merged
previously, a power management core code fix and updates of the
runtime PM framework including unit tests, documentation updates and
introduction of auto-cleanup macros for runtime PM "resume and get"
and "get without resuming" operations.
Specifics:
- Make cpufreq drivers setting the default CPU transition latency to
CPUFREQ_ETERNAL specify a proper default transition latency value
instead which addresses a regression introduced during the 6.6
cycle that broke CPUFREQ_ETERNAL handling (Rafael Wysocki)
- Make the cpufreq CPPC driver use a proper transition delay value
when CPUFREQ_ETERNAL is returned by cppc_get_transition_latency()
to indicate an error condition (Rafael Wysocki)
- Make cppc_get_transition_latency() return a negative error code to
indicate error conditions instead of using CPUFREQ_ETERNAL for this
purpose and drop CPUFREQ_ETERNAL that has no other users (Rafael
Wysocki, Gopi Krishna Menon)
- Fix device leak in the mediatek cpufreq driver (Johan Hovold)
- Set target frequency on all CPUs sharing a policy during frequency
updates in the tegra186 cpufreq driver and make it initialize all
cores to max frequencies (Aaron Kling)
- Rust cpufreq helper cleanup (Thorsten Blum)
- Make pm_runtime_put*() family of functions return 1 when the given
device is already suspended which is consistent with the
documentation (Brian Norris)
- Add basic kunit tests for runtime PM API contracts and update
return values in kerneldoc comments for the runtime PM API (Brian
Norris, Dan Carpenter)
- Add auto-cleanup macros for runtime PM "resume and get" and "get
without resume" operations, use one of them in the PCI core and
drop the existing "free" macro introduced for similar purpose, but
somewhat cumbersome to use (Rafael Wysocki)
- Make the core power management code avoid waiting on device links
marked as SYNC_STATE_ONLY which is consistent with the handling of
those device links elsewhere (Pin-yen Lin)"
* tag 'pm-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
docs/zh_CN: Fix malformed table
docs/zh_TW: Fix malformed table
PM: runtime: Fix error checking for kunit_device_register()
PM: runtime: Introduce one more usage counter guard
cpufreq: Drop unused symbol CPUFREQ_ETERNAL
ACPI: CPPC: Do not use CPUFREQ_ETERNAL as an error value
cpufreq: CPPC: Avoid using CPUFREQ_ETERNAL as transition delay
cpufreq: Make drivers using CPUFREQ_ETERNAL specify transition latency
PM: runtime: Drop DEFINE_FREE() for pm_runtime_put()
PCI/sysfs: Use runtime PM guard macro for auto-cleanup
PM: runtime: Add auto-cleanup macros for "resume and get" operations
cpufreq: tegra186: Initialize all cores to max frequencies
cpufreq: tegra186: Set target frequency for all cpus in policy
rust: cpufreq: streamline find_supply_names
cpufreq: mediatek: fix device leak on probe failure
PM: sleep: Do not wait on SYNC_STATE_ONLY device links
PM: runtime: Update kerneldoc return codes
PM: runtime: Make put{,_sync}() return 1 when already suspended
PM: runtime: Add basic kunit tests for API contracts
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There's a bunch of patches here across drivers/clk/ to migrate drivers
to use struct clk_ops::determine_rate() instead of the round_rate()
one so that we can remove the round_rate clk_op entirely. Brian has
taken up that task which nobody else has wanted to do for close to a
decade. Thanks Brian!
This is all prerequisite work to get to the real task of improving the
clk rate setting process. Once we have determine_rate() used
everywhere, we'll be able to do things like chain the rate request
structs in linked lists to order the rate setting operations or add
more parameters without having to change every clk driver in
existence. It's also nice to not have multiple ways to do something
which just causes confusion for clk driver authors. Overall I'm glad
this is getting done.
Beyond this change we also have a tweak to the clk_lookup() function
in the core framework to use hashing on the clk name instead of a clk
tree walk with string comparisons. We _still_ rely on the clk name to
be unique, because historically we've used globally unique strings to
describe the clk tree topology. This tree walk becomes increasingly
slow as more clks are added to the system. Searching from the roots
for a duplicate is simple but pretty dumb and it wastes boot time so
we're using a hash table as an improvement. Ideally we wouldn't rely
on the strings to be unique at all, relegating them to simply debug
information, but that is future work that will likely require some
sort of Kconfig knob indicating strings aren't used for topology
description.
Outside of the core framework changes we have the usual new SoC
support and fixes to clk drivers for things that were discovered once
the clks were used by consumer drivers. Nothing in particular is
jumping out at me in the "misc" pile, except maybe the Amlogic driver
that has gone through a refactoring. That series got a fix from
testing in -next though so it seems likely that things have been
getting good test coverage for a couple weeks already"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (299 commits)
clk: microchip: core: remove duplicate roclk_determine_rate()
reset: aspeed: register AST2700 reset auxiliary bus device
dt-bindings: clock: ast2700: modify soc0/1 clock define
clk: tegra: do not overallocate memory for bpmp clocks
clk: ep93xx: Use int type to store negative error codes
clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver
clk: loongson2: Add clock definitions for Loongson-2K0300 SoC
clk: loongson2: Avoid hardcoding firmware name of the reference clock
clk: loongson2: Allow zero divisors for dividers
clk: loongson2: Support scale clocks with an alternative mode
clk: loongson2: Allow specifying clock flags for gate clock
dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible
clk: clocking-wizard: Fix output clock register offset for Versal platforms
clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver()
clk: mmp: pxa1908: Instantiate power driver through auxiliary bus
clk: s2mps11: add support for S2MPG10 PMIC clock
dt-bindings: clock: samsung,s2mps11: add s2mpg10
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Preserve old 'tt_core' UAPI for Hisilicon L3C PMU driver
- Ensure linear alias of kprobes instruction page is not writable
- Fix kernel stack unwinding from BPF
- Fix build warnings from the Fujitsu uncore PMU documentation
- Fix hang with deferred 'struct page' initialisation and MTE
- Consolidate KPTI page-table re-writing code
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mte: Do not flag the zero page as PG_mte_tagged
docs: perf: Fujitsu: Fix htmldocs build warnings and errors
arm64: mm: Move KPTI helpers to mmu.c
tracing: Fix the bug where bpf_get_stackid returns -EFAULT on the ARM64
arm64: kprobes: call set_memory_rox() for kprobe page
drivers/perf: hisi: Add tt_core_deprecated for compatibility
|
|
Merge cpufreq fixes and cleanups, mostly on top of those fixes, for
6.18-rc1:
- Make cpufreq drivers setting the default CPU transition latency to
CPUFREQ_ETERNAL specify a proper default transition latency value
instead which addresses a regression introduced during the 6.6 cycle
that broke CPUFREQ_ETERNAL handling (Rafael Wysocki)
- Make the cpufreq CPPC driver use a proper transition delay value
when CPUFREQ_ETERNAL is returned by cppc_get_transition_latency() to
indicate an error condition (Rafael Wysocki)
- Make cppc_get_transition_latency() return a negative error code to
indicate error conditions instead of using CPUFREQ_ETERNAL for this
purpose and drop CPUFREQ_ETERNAL that has no other users (Rafael
Wysocki, Gopi Krishna Menon)
- Fix device leak in the mediatek cpufreq driver (Johan Hovold)
- Set target frequency on all CPUs sharing a policy during frequency
updates in the tegra186 cpufreq driver and make it initialize all
cores to max frequencies (Aaron Kling)
- Rust cpufreq helper cleanup (Thorsten Blum)
* pm-cpufreq:
docs/zh_CN: Fix malformed table
docs/zh_TW: Fix malformed table
cpufreq: Drop unused symbol CPUFREQ_ETERNAL
ACPI: CPPC: Do not use CPUFREQ_ETERNAL as an error value
cpufreq: CPPC: Avoid using CPUFREQ_ETERNAL as transition delay
cpufreq: Make drivers using CPUFREQ_ETERNAL specify transition latency
cpufreq: tegra186: Initialize all cores to max frequencies
cpufreq: tegra186: Set target frequency for all cpus in policy
rust: cpufreq: streamline find_supply_names
cpufreq: mediatek: fix device leak on probe failure
|
|
Document the QMP UFS PHY compatible for Qualcomm Kaanapali to support
physical layer functionality for UFS found on the SoC. Use fallback to
indicate the compatibility of the QMP UFS PHY on the Kaanapali with that
on the SM8750.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Document the UFS Controller on the Kaanapali Platform.
Signed-off-by: Nitin Rawat <nitin.rawat@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Message-Id: <20250924-knp-ufs-v1-1-42e0955a1f7c@oss.qualcomm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The MediaTek MT8196 SoC includes an embedded MCU referred to as "GPUEB",
acting as glue logic to control power and frequency of the Mali GPU.
This MCU runs special-purpose firmware for this use, and the main
application processor communicates with it through a mailbox.
Add a binding that describes this mailbox.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
The GCE Mailbox needs only one clock and the clock-names can be
used only by the driver (which, for instance, does not use it),
and this is true for all of the currently supported MediaTek SoCs.
Stop requiring to specify clock-names on all non-MT8195 GCEs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Document CPU Control Processor (CPUCP) mailbox controller for Qualcomm
Glymur SoCs. It is software compatible with X1E80100 CPUCP mailbox
controller hence fallback to it.
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
Pull x86 kvm updates from Paolo Bonzini:
"Generic:
- Rework almost all of KVM's exports to expose symbols only to KVM's
x86 vendor modules (kvm-{amd,intel}.ko and PPC's kvm-{pr,hv}.ko
x86:
- Rework almost all of KVM x86's exports to expose symbols only to
KVM's vendor modules, i.e. to kvm-{amd,intel}.ko
- Add support for virtualizing Control-flow Enforcement Technology
(CET) on Intel (Shadow Stacks and Indirect Branch Tracking) and AMD
(Shadow Stacks).
It is worth noting that while SHSTK and IBT can be enabled
separately in CPUID, it is not really possible to virtualize them
separately. Therefore, Intel processors will really allow both
SHSTK and IBT under the hood if either is made visible in the
guest's CPUID. The alternative would be to intercept
XSAVES/XRSTORS, which is not feasible for performance reasons
- Fix a variety of fuzzing WARNs all caused by checking L1 intercepts
when completing userspace I/O. KVM has already committed to
allowing L2 to to perform I/O at that point
- Emulate PERF_CNTR_GLOBAL_STATUS_SET for PerfMonV2 guests, as the
MSR is supposed to exist for v2 PMUs
- Allow Centaur CPU leaves (base 0xC000_0000) for Zhaoxin CPUs
- Add support for the immediate forms of RDMSR and WRMSRNS, sans full
emulator support (KVM should never need to emulate the MSRs outside
of forced emulation and other contrived testing scenarios)
- Clean up the MSR APIs in preparation for CET and FRED
virtualization, as well as mediated vPMU support
- Clean up a pile of PMU code in anticipation of adding support for
mediated vPMUs
- Reject in-kernel IOAPIC/PIT for TDX VMs, as KVM can't obtain EOI
vmexits needed to faithfully emulate an I/O APIC for such guests
- Many cleanups and minor fixes
- Recover possible NX huge pages within the TDP MMU under read lock
to reduce guest jitter when restoring NX huge pages
- Return -EAGAIN during prefault if userspace concurrently
deletes/moves the relevant memslot, to fix an issue where
prefaulting could deadlock with the memslot update
x86 (AMD):
- Enable AVIC by default for Zen4+ if x2AVIC (and other prereqs) is
supported
- Require a minimum GHCB version of 2 when starting SEV-SNP guests
via KVM_SEV_INIT2 so that invalid GHCB versions result in immediate
errors instead of latent guest failures
- Add support for SEV-SNP's CipherText Hiding, an opt-in feature that
prevents unauthorized CPU accesses from reading the ciphertext of
SNP guest private memory, e.g. to attempt an offline attack. This
feature splits the shared SEV-ES/SEV-SNP ASID space into separate
ranges for SEV-ES and SEV-SNP guests, therefore a new module
parameter is needed to control the number of ASIDs that can be used
for VMs with CipherText Hiding vs. how many can be used to run
SEV-ES guests
- Add support for Secure TSC for SEV-SNP guests, which prevents the
untrusted host from tampering with the guest's TSC frequency, while
still allowing the the VMM to configure the guest's TSC frequency
prior to launch
- Validate the XCR0 provided by the guest (via the GHCB) to avoid
bugs resulting from bogus XCR0 values
- Save an SEV guest's policy if and only if LAUNCH_START fully
succeeds to avoid leaving behind stale state (thankfully not
consumed in KVM)
- Explicitly reject non-positive effective lengths during SNP's
LAUNCH_UPDATE instead of subtly relying on guest_memfd to deal with
them
- Reload the pre-VMRUN TSC_AUX on #VMEXIT for SEV-ES guests, not the
host's desired TSC_AUX, to fix a bug where KVM was keeping a
different vCPU's TSC_AUX in the host MSR until return to userspace
KVM (Intel):
- Preparation for FRED support
- Don't retry in TDX's anti-zero-step mitigation if the target
memslot is invalid, i.e. is being deleted or moved, to fix a
deadlock scenario similar to the aforementioned prefaulting case
- Misc bugfixes and minor cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (142 commits)
KVM: x86: Export KVM-internal symbols for sub-modules only
KVM: x86: Drop pointless exports of kvm_arch_xxx() hooks
KVM: x86: Move kvm_intr_is_single_vcpu() to lapic.c
KVM: Export KVM-internal symbols for sub-modules only
KVM: s390/vfio-ap: Use kvm_is_gpa_in_memslot() instead of open coded equivalent
KVM: VMX: Make CR4.CET a guest owned bit
KVM: selftests: Verify MSRs are (not) in save/restore list when (un)supported
KVM: selftests: Add coverage for KVM-defined registers in MSRs test
KVM: selftests: Add KVM_{G,S}ET_ONE_REG coverage to MSRs test
KVM: selftests: Extend MSRs test to validate vCPUs without supported features
KVM: selftests: Add support for MSR_IA32_{S,U}_CET to MSRs test
KVM: selftests: Add an MSR test to exercise guest/host and read/write
KVM: x86: Define AMD's #HV, #VC, and #SX exception vectors
KVM: x86: Define Control Protection Exception (#CP) vector
KVM: x86: Add human friendly formatting for #XM, and #VE
KVM: SVM: Enable shadow stack virtualization for SVM
KVM: SEV: Synchronize MSR_IA32_XSS from the GHCB when it's valid
KVM: SVM: Pass through shadow stack MSRs as appropriate
KVM: SVM: Update dump_vmcb with shadow stack save area additions
KVM: nSVM: Save/load CET Shadow Stack state to/from vmcb12/vmcb02
...
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- renesas,wdt: Add support for RZ/T2H and RZ/N2H
- Add SMARC-sAM67 support
- Several small fixes and improvements
* tag 'linux-watchdog-6.18-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog/hpwdt New maintianer
dt-bindings: watchdog: add SMARC-sAM67 support
watchdog: mpc8xxx_wdt: Reload the watchdog timer when enabling the watchdog
watchdog: visconti: don't print superfluous errors
watchdog: rzv2h_wdt: don't print superfluous errors
watchdog: rzg2l_wdt: don't print superfluous errors
watchdog: s3c2410_wdt: exynosautov9: Enable supported features
watchdog: s3c2410_wdt: exynosautov920: Enable QUIRK_HAS_32BIT_CNT
watchdog: s3c2410_wdt: Increase max timeout value of watchdog
watchdog: s3c2410_wdt: Fix max_timeout being calculated larger
watchdog: s3c2410_wdt: Replace hardcoded values with macro definitions
watchdog: rzv2h: Improve error strings and add newlines
watchdog: rzv2h: Add support for RZ/T2H
watchdog: rzv2h: Add support for configurable count clock source
watchdog: rzv2h: Make "oscclk" and reset controller optional
watchdog: rzv2h: Obtain clock-divider and timeout values from OF match data
dt-bindings: watchdog: renesas,wdt: Add support for RZ/T2H and RZ/N2H
watchdog: intel_oc_wdt: Do not try to write into const memory
|
|
'clk-loongson' into clk-next
- Add Mediatek MT8196 clk drivers
* clk-marvell:
clk: mmp: pxa1908: Instantiate power driver through auxiliary bus
* clk-xilinx:
clk: clocking-wizard: Fix output clock register offset for Versal platforms
clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver()
* clk-mediatek: (31 commits)
clk: mediatek: Add MT8196 vencsys clock support
clk: mediatek: Add MT8196 vdecsys clock support
clk: mediatek: Add MT8196 ovl1 clock support
clk: mediatek: Add MT8196 ovl0 clock support
clk: mediatek: Add MT8196 disp-ao clock support
clk: mediatek: Add MT8196 disp1 clock support
clk: mediatek: Add MT8196 disp0 clock support
clk: mediatek: Add MT8196 mfg clock support
clk: mediatek: Add MT8196 mdpsys clock support
clk: mediatek: Add MT8196 mcu clock support
clk: mediatek: Add MT8196 I2C clock support
clk: mediatek: Add MT8196 pextpsys clock support
clk: mediatek: Add MT8196 ufssys clock support
clk: mediatek: Add MT8196 peripheral clock support
clk: mediatek: Add MT8196 vlpckgen clock support
clk: mediatek: Add MT8196 topckgen2 clock support
clk: mediatek: Add MT8196 topckgen clock support
clk: mediatek: Add MT8196 apmixedsys clock support
dt-bindings: clock: mediatek: Describe MT8196 clock controllers
clk: mediatek: clk-mtk: Add MUX_DIV_GATE macro
...
* clk-loongson:
clk: loongson2: Add clock definitions for Loongson-2K0300 SoC
clk: loongson2: Avoid hardcoding firmware name of the reference clock
clk: loongson2: Allow zero divisors for dividers
clk: loongson2: Support scale clocks with an alternative mode
clk: loongson2: Allow specifying clock flags for gate clock
dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible
|
|
- Speed up clk_core_lookup() by using a hashtable
* clk-microchip:
ARM: at91: remove default values for PMC_PLL_ACR
clk: at91: add ACR in all PLL settings
clk: at91: sam9x7: Add peripheral clock id for pmecc
clk: at91: clk-master: Add check for divide by 3
clk: at91: clk-sam9x60-pll: force write to PLL_UPDT register
ARM: at91: pm: save and restore ACR during PLL disable/enable
* clk-lookup:
clk: Use hashtable for global clk lookups
clk: Sort include statements
* clk-st:
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
|
|
* clk-scmi:
clk: scmi: Add duty cycle ops only when duty cycle is supported
* clk-qcom: (27 commits)
clk: qcom: gcc-sc8280xp: drop obsolete PCIe GDSC comment
clk: qcom: tcsrcc-x1e80100: Set the bi_tcxo as parent to eDP refclk
clk: qcom: dispcc-glymur: Constify 'struct qcom_cc_desc'
clk: qcom: gcc: Add support for Global Clock controller found on MSM8937
dt-bindings: clock: qcom: Add MSM8937 Global Clock Controller
clk: qcom: Select the intended config in QCS_DISPCC_615
clk: qcom: common: Fix NULL vs IS_ERR() check in qcom_cc_icc_register()
clk: qcom: alpha-pll: convert from round_rate() to determine_rate()
clk: qcom: milos: Constify 'struct qcom_cc_desc'
clk: qcom: gcc: Add support for Global Clock Controller
dt-bindings: clock: qcom: document the Glymur Global Clock Controller
clk: qcom: clk-alpha-pll: Add support for Taycan EKO_T PLL
clk: qcom: rpmh: Add support for Glymur rpmh clocks
clk: qcom: Add TCSR clock driver for Glymur SoC
dt-bindings: clock: qcom: Document the Glymur SoC TCSR Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Glymur SoCs
clk: qcom: dispcc-glymur: Add support for Display Clock Controller
dt-bindings: clock: Add DISPCC and reset controller for GLYMUR SoC
clk: qcom: gcc-sdm660: Add missing LPASS/CDSP vote clocks
dt-bindings: clock: gcc-sdm660: Add LPASS/CDSP vote clocks/GDSCs
...
* clk-broadcom:
clk: bcm: rpi: Maximize V3D clock
clk: bcm: rpi: Turn firmware clock on/off when preparing/unpreparing
clk: bcm: rpi: Add missing logs if firmware fails
|
|
* clk-imx:
clk: imx95-blk-ctl: Save/restore registers when RPM routines are called
clk: imx95-blk-ctl: Save platform data in imx95_blk_ctl structure
* clk-allwinner:
clk: sunxi-ng: add support for the A523/T527 MCU CCU
clk: sunxi-ng: div: support power-of-two dividers
clk: sunxi-ng: sun55i-a523-ccu: Add missing NPU module clock
dt-bindings: clock: sun55i-a523-ccu: Add A523 MCU CCU clock controller
dt-bindings: clock: sun55i-a523-ccu: Add missing NPU module clock
clk: sunxi-ng: sun6i-rtc: Add A523 specifics
* clk-ti:
clk: keystone: sci-clk: use devm_kmemdup_array()
clk: ti: am33xx: keep WKUP_DEBUGSS_CLKCTRL enabled
|
|
* clk-samsung:
clk: s2mps11: add support for S2MPG10 PMIC clock
dt-bindings: clock: samsung,s2mps11: add s2mpg10
clk: samsung: exynos990: Add PERIC0 and PERIC1 clock support
dt-bindings: clock: exynos990: Add PERIC0 and PERIC1 clock units
clk: samsung: exynos990: Add missing USB clock registers to HSI0
clk: samsung: exynos990: Add LHS_ACEL gate clock for HSI0 and update CLK_NR_TOP
dt-bindings: clock: exynos990: Add LHS_ACEL clock ID for HSI0 block
clk: samsung: artpec-8: Add initial clock support for ARTPEC-8 SoC
clk: samsung: Add clock PLL support for ARTPEC-8 SoC
dt-bindings: clock: Add ARTPEC-8 clock controller
clk: samsung: exynos990: Add DPU_BUS and CMUREF mux/div and update CLKS_NR_TOP
dt-bindings: clock: exynos990: Extend clocks IDs
clk: samsung: exynos990: Replace bogus divs with fixed-factor clocks
clk: samsung: exynos990: Fix CMU_TOP mux/div bit widths
clk: samsung: exynos990: Use PLL_CON0 for PLL parent muxes
clk: samsung: pll: convert from round_rate() to determine_rate()
clk: samsung: cpu: convert from round_rate() to determine_rate()
clk: samsung: fsd: Add clk id for PCLK and PLL in CAM_CSI block
dt-bindings: clock: Add CAM_CSI clock macro for FSD
* clk-tegra:
clk: tegra: dfll: Add CVB tables for Tegra114
clk: tegra: Add DFLL DVCO reset control for Tegra114
dt-bindings: arm: tegra: Add ASUS TF101G and SL101
dt-bindings: reset: Add Tegra114 CAR header
dt-bindings: arm: tegra: Add Xiaomi Mi Pad (A0101)
dt-bindings: clock: tegra30: Add IDs for CSI pad clocks
dt-bindings: display: tegra: Move avdd-dsi-csi-supply from VI to CSI
dt-bindings: i2c: nvidia,tegra20-i2c: Document Tegra264 I2C
* clk-amlogic:
clk: amlogic: fix recent code refactoring
clk: amlogic: c3-peripherals: use helper for basic composite clocks
clk: amlogic: align s4 and c3 pwm clock descriptions
clk: amlogic: add composite clock helpers
clk: amlogic: use the common pclk definition
clk: amlogic: introduce a common pclk definition
clk: amlogic: pclk explicitly use CLK_IGNORE_UNUSED
clk: amlogic: drop CLK_SET_RATE_PARENT from peripheral clocks
clk: amlogic: move PCLK definition to clkc-utils
clk: amlogic: aoclk: use clkc-utils syscon probe
clk: amlogic: use probe helper in mmio based controllers
clk: amlogic: add probe helper for mmio based controllers
clk: amlogic: drop meson-clkcee
clk: amlogic: naming consistency alignment
|
|
'clk-spacemit' into clk-next
* clk-bindings:
dt-bindings: clock: mediatek: Add power-domains property
dt-bindings: clock: silabs,si5341: Add missing properties
dt-bindings: clock: adi,axi-clkgen: add clock-output-names property
dt-bindings: clock: Remove unused fujitsu,mb86s70-crg11 binding
dt-bindings: clock: Convert silabs,si570 to DT schema
dt-bindings: clock: Convert silabs,si5341 to DT schema
dt-bindings: clock: Convert silabs,si514/544 to DT schema
* clk-cleanup:
clk: tegra: do not overallocate memory for bpmp clocks
clk: ep93xx: Use int type to store negative error codes
dt-bindings: clock: st: flexgen: remove deprecated compatibles
clk: st: flexgen: remove unused compatible
clk: clk-axi-clkgen: remove unneeded semicolon
clk: tegra: Remove redundant semicolons
clk: npcm: select CONFIG_AUXILIARY_BUS
clk: remove unneeded 'fast_io' parameter in regmap_config
* clk-renesas: (27 commits)
clk: renesas: r9a09g05[67]: Reduce differences
clk: renesas: r9a09g047: Add USB3.0 clocks/resets
clk: renesas: cpg-mssr: Fix memory leak in cpg_mssr_reserved_init()
clk: renesas: r9a09g056: Add clock and reset entries for I3C
clk: renesas: r9a09g057: Add clock and reset entries for I3C
dt-bindings: clock: renesas,r9a09g047-cpg: Add USB3.0 core clocks
clk: renesas: r9a09g077: Add Ethernet Subsystem core and module clocks
clk: renesas: rzv2h: Simplify polling condition in __rzv2h_cpg_assert()
clk: renesas: rzv2h: Re-assert reset on deassert timeout
clk: renesas: rzg2l: Re-assert reset on deassert timeout
clk: renesas: rzg2l: Simplify rzg2l_cpg_assert() and rzg2l_cpg_deassert()
dt-bindings: clock: renesas,r9a09g077/87: Add Ethernet clock IDs
clk: renesas: r9a09g047: Add GPT clocks and resets
clk: renesas: r9a09g077: Add module clocks for SCI1-SCI5
clk: renesas: rzv2h: remove round_rate() in favor of determine_rate()
clk: renesas: rzg2l: convert from round_rate() to determine_rate()
clk: renesas: r9a07g04[34]: Use tabs instead of spaces
clk: renesas: r9a07g043: Add MSTOP for RZ/G2UL
clk: renesas: r9a07g044: Add MSTOP for RZ/G2L
clk: renesas: r9a08g045: Add MSTOP for GPIO
...
* clk-thead:
clk: thead: th1520-ap: set all AXI clocks to CLK_IS_CRITICAL
clk: thead: support changing DPU pixel clock rate
clk: thead: add support for enabling/disabling PLLs
clk: thead: Correct parent for DPU pixel clocks
clk: thead: th1520-ap: fix parent of padctrl0 clock
clk: thead: th1520-ap: describe gate clocks with clk_gate
* clk-spacemit:
clk: spacemit: fix i2s clock
clk: spacemit: introduce pre-div for ddn clock
dt-bindings: clock: spacemit: introduce i2s pre-clock to fix i2s clock
clk: spacemit: ccu_pll: convert from round_rate() to determine_rate()
clk: spacemit: ccu_mix: convert from round_rate() to determine_rate()
clk: spacemit: ccu_ddn: convert from round_rate() to determine_rate()
clk: spacemit: fix sspax_clk
dt-bindings: clock: spacemit: CLK_SSPA_I2S_BCLK for SSPA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A couple of new device support and small driver updates for this
round.
New support:
- Intel idxd Wildcat Lake family support
- SpacemiT K1 PDMA controller support
- Renesas RZ/G3E family support
Updates:
- Xilinx shutdown support and dma client properties update
- Designware edma callback_result support"
* tag 'dmaengine-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dt-bindings: dma: rz-dmac: Document RZ/G3E family of SoCs
dmaengine: dw-edma: Set status for callback_result
dmaengine: mv_xor: match alloc_wc and free_wc
dmaengine: mmp_pdma: Add SpacemiT K1 PDMA support with 64-bit addressing
dmaengine: mmp_pdma: Add operations structure for controller abstraction
dmaengine: mmp_pdma: Add reset controller support
dmaengine: mmp_pdma: Add clock support
dt-bindings: dma: Add SpacemiT K1 PDMA controller
dt-bindings: dmaengine: xilinx_dma: Remove DMA client properties
dmaengine: Fix dma_async_tx_descriptor->tx_submit documentation
dmaengine: xilinx_dma: Support descriptor setup from dma_vecs
dmaengine: sh: setup_xref error handling
dmaengine: Replace zero-length array with flexible-array
dmaengine: ppc4xx: Remove space before newline
dmaengine: idxd: Add a new IAA device ID for Wildcat Lake family platforms
dmaengine: idxd: Replace memset(0) + strscpy() with strscpy_pad()
dt-bindings: dma: nvidia,tegra20-apbdma: Add undocumented compatibles and "clock-names"
dmaengine: zynqmp_dma: Add shutdown operation support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"The usual bunch of device support and update to drivers.
New Support
- Qualcomm SM8750 QMP PCIe PHY dual lane support, PMIV0104 eusb2
repeater support, QCS8300 eDP PHY support
- Renesas RZ/T2H and RZ/N2H support and updates to driver for that
- TI TCAN1051 phy support
- Rockchip rk3588 dphy support, RK3528 combphy support
Updates:
- cadence updates for calibration and polling for ready and enabling
of lower resolutions, runtime pm support,
- Rockchip: enable U3 otg port
- Renesas USXGMII mode support
- Qualcomm UFS PHY and PLL regulator load support"
* tag 'phy-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (64 commits)
phy: rockchip: phy-rockchip-inno-csidphy: add support for rk3588 variant
phy: rockchip: phy-rockchip-inno-csidphy: allow for different reset lines
phy: rockchip: phy-rockchip-inno-csidphy: allow writes to grf register 0
dt-bindings: phy: rockchip-inno-csi-dphy: add rk3588 variant
dt-bindings: phy: rockchip-inno-csi-dphy: make power-domains non-required
phy: cadence: cdns-dphy: Enable lower resolutions in dphy
phy: renesas: r8a779f0-ether-serdes: add new step added to latest datasheet
phy: renesas: r8a779f0-ether-serdes: add USXGMII mode
phy: sophgo: Add USB 2.0 PHY driver for Sophgo CV18XX/SG200X
dt-bindings: phy: Add Sophgo CV1800 USB phy
phy: cadence: cdns-dphy: Update calibration wait time for startup state machine
phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling
phy: renesas: rcar-gen3-usb2: Fix ID check logic with VBUS valid
dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051
phy: lynx-28g: check return value when calling lynx_28g_pll_get
phy: qcom: m31-eusb2: Fix the error log while enabling clock
phy: rockchip: usbdp: Remove redundant ternary operators
phy: renesas: rcar-gen3-usb2: Remove redundant ternary operators
phy: hisilicon: Remove redundant ternary operators
phy: qcom-qmp-ufs: Add PHY and PLL regulator load
...
|
|
A debugfs directory was recently added for VFIO devices. Add a new
"features" file under the migration sub-directory to expose which
features the device supports.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20250918121928.1921871-1-clg@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal:
- Improve the DT bindings documentation for the highbanck, imx and
xgene-ahci controllers (Krzysztof, Fabio, Rob)
* tag 'ata-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
dt-bindings: ata: apm,xgene-ahci: Add apm,xgene-ahci-v2 support
dt-bindings: ata: imx: Document 'target-supply'
dt-bindings: ata: highbank: Minor whitespace cleanup in example
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"Only two patch series in this pull request:
- "mm/memory_hotplug: fixup crash during uevent handling" from Hannes
Reinecke fixes a race that was causing udev to trigger a crash in
the memory hotplug code
- "mm_slot: following fixup for usage of mm_slot_entry()" from Wei
Yang adds some touchups to the just-merged mm_slot changes"
* tag 'mm-stable-2025-10-03-16-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/khugepaged: use KMEM_CACHE()
mm/ksm: cleanup mm_slot_entry() invocation
Documentation/mm: drop pxx_mkdevmap() descriptions from page table helpers
mm: clean up is_guard_pte_marker()
drivers/base: move memory_block_add_nid() into the caller
mm/memory_hotplug: activate node before adding new memory blocks
drivers/base/memory: add node id parameter to add_memory_block()
|
|
Convert the APM XGene RTC binding to DT schema format. It's a
straight-forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250924222848.2949235-1-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer:
- switch longson32 platform to DT and use MIPS_GENERIC framework
- cleanups/fixes for lantiq DTs
- other cleanups and fixes
* tag 'mips_6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits)
mips: math-emu: replace deprecated strcpy() in me-debugfs
MIPS: configs: Consolidate Loongson1 defconfigs
MIPS: Unify Loongson1 PRID_REV
MIPS: loongson32: Switch to generic core
MIPS: loongson: Add built-in DTB support
MIPS: dts: loongson: Add CQ-T300B board
MIPS: dts: loongson: Add Smartloong-1C board
MIPS: dts: loongson: Add LSGZ_1B_DEV board
MIPS: dts: loongson: Add LS1B-DEMO board
dt-bindings: mips: loongson: Add LS1B-DEMO and CQ-T300B
mips: lantiq: danube: rename stp node on EASY50712 reference board
mips: lantiq: xway: sysctrl: rename stp clock
MIPS: RB532: Replace deprecated strcpy() with memcpy() and strscpy()
MIPS: Loongson64: Replace deprecated strcpy() with strscpy_pad()
MIPS: generic: Replace deprecated strcpy() in ocelot_detect()
MIPS: octeon: Replace deprecated strcpy() in octeon_model_get_string_buffer()
MIPS: octeon: Replace memset(0) + deprecated strcpy() with strscpy_pad()
MIPS: arc: Replace deprecated strcpy() with memcpy()
MIPS: txx9: Replace deprecated strcpy() with strscpy()
MIPS: sni: Replace deprecated strcpy() in sni_console_setup()
...
|
|
Pull OpenRISC updates from Stafford Horne:
"I picked up one series from Chen Miao, our Google Summer of Code
contributor, which adds OpenRISC support for static keys"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: Add jump label support
openrisc: Regenerate defconfigs.
openrisc: Add R_OR1K_32_PCREL relocation type module support
openrisc: Add text patching API support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt
- This is mostly just consolidating code between osnoise/timerlat and
top/hist for easier maintenance and less future divergence
* tag 'trace-tools-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/rtla: Add remaining support for osnoise actions
tools/rtla: Add test engine support for unexpected output
tools/rtla: Fix -A option name in test comment
tools/rtla: Consolidate code between osnoise/timerlat and hist/top
tools/rtla: Create common_apply_config()
tools/rtla: Move top/hist params into common struct
tools/rtla: Consolidate common parameters into shared structure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It
was another normal development cycle, with lots of the usual drivers
getting updates:
- Thunderbolt driver cleanups and additions
- dwc3 driver updates
- dwc2 driver updates
- typec driver updates
- xhci driver updates and additions
- offload USB engine updates for better power management
- unused tracepoint removals
- usb gadget fixes and updates as more users start to rely on these
drivers instead of the "old" function gadget drivers
- new USB device ids
- other minor driver USB driver updates
- new USB I/O driver framework and driver additions"
The last item, the usb i/o driver, has an i2c and gpio driver added
through this tree. Those drivers were acked by the respective
subsystem maintainers.
All of these have been in linux-next for a while"
* tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits)
usb: vhci-hcd: Prevent suspending virtually attached devices
USB: serial: option: add SIMCom 8230C compositions
thunderbolt: Fix use-after-free in tb_dp_dprx_work
usb: xhci: align PORTSC trace with one-based port numbering
usb: xhci: correct indentation for PORTSC tracing function
usb: xhci: improve TR Dequeue Pointer mask
usb: xhci-pci: add support for hosts with zero USB3 ports
usb: xhci: Update a comment about Stop Endpoint retries
Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"
usb: gadget: f_rndis: Refactor bind path to use __free()
usb: gadget: f_ecm: Refactor bind path to use __free()
usb: gadget: f_acm: Refactor bind path to use __free()
usb: gadget: f_ncm: Refactor bind path to use __free()
usb: gadget: Introduce free_usb_request helper
usb: gadget: Store endpoint pointer in usb_request
usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
usb: host: xhci-rcar: Move R-Car reg definitions
dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here are some small updates for tty/serial drivers for 6.18-rc1.
Not many changes overall, just the usual:
- abi cleanups and reworking of the tty functions by Jiri by adding
console lock guard logic
- 8250_platform driver updates
- qcom-geni driver updates
- other minor serial driver updates
- some more vt escape codes added
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (43 commits)
tty: serial: fix help message for SERIAL_CPM
serial: 8250: omap: Support wakeup pinctrl state on suspend
dt-bindings: serial: 8250_omap: Add wakeup pinctrl state
serial: max310x: improve interrupt handling
vt: move vc_saved_screen to within tty allocated judgment
Revert "m68k: make HPDCA and HPAPCI bools"
tty: remove redundant condition checks
tty/vt: Add missing return value for VT_RESIZE in vt_ioctl()
vt: remove redundant check on vc_mode in con_font_set()
serial: qcom-geni: Add DFS clock mode support to GENI UART driver
m68k: make HPDCA and HPAPCI bools
tty: n_gsm: Don't block input queue by waiting MSC
serial: qcom-geni: Fix off-by-one error in ida_alloc_range()
serdev: Drop dev_pm_domain_detach() call
serial: sc16is7xx: drop redundant conversion to bool
vt: add support for smput/rmput escape codes
serial: stm32: allow selecting console when the driver is module
serial: 8250_core: fix coding style issue
tty: serial: Modify the use of dev_err_probe()
s390/char/con3270: use tty_port_tty guard()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD core:
- Bad blocks increment is skipped if the block is already known bad
(improves user statistics relevance)
- Expose the OOB layout via debugfs
Raw NAND:
- Add support for Loongson-2K1000 and Loongson-2K0500 NAND
controllers, including extra features, such as chip select
and 6-byte NAND ID reading support
- Drop the s3c2410 driver
SPI NAND:
- Important SPI NAND continuous read improvements and fixes
- Add support for FudanMicro FM25S01A
- Add support for continuous reads in Gigadevice vendor driver
ECC:
- Add support for the Realtek ECC engine
SPI NOR:
- Some flashes can't perform reads or writes with start or end being
an odd number in Octal DTR mode. File systems like UBIFS can
request such reads or writes, causing the transaction to error out.
Pad the read or write transactions with extra bytes to avoid this
problem.
And the usual amount of various miscellaneous fixes"
* tag 'mtd/for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (46 commits)
mtd: rawnand: sunxi: drop unused module alias
mtd: rawnand: stm32_fmc2: drop unused module alias
mtd: rawnand: rockchip: drop unused module alias
mtd: rawnand: pl353: drop unused module alias
mtd: rawnand: omap2: drop unused module alias
mtd: rawnand: atmel: drop unused module alias
mtd: onenand: omap2: drop unused module alias
mtd: hyperbus: hbmc-am654: drop unused module alias
mtd: jedec_probe: use struct_size() helper for cfiq allocation
mtd: cfi: use struct_size() helper for cfiq allocation
mtd: nand: raw: gpmi: fix clocks when CONFIG_PM=N
mtd: rawnand: omap2: fix device leak on probe failure
mtd: rawnand: atmel: Fix error handling path in atmel_nand_controller_add_nands
mtd: nand: realtek-ecc: Add Realtek external ECC engine support
dt-bindings: mtd: Add realtek,rtl9301-ecc
mtd: spinand: repeat reading in regular mode if continuous reading fails
mtd: spinand: try a regular dirmap if creating a dirmap for continuous reading fails
mtd: spinand: fix direct mapping creation sizes
mtd: rawnand: fsmc: Default to autodetect buswidth
mtd: nand: move nand_check_erased_ecc_chunk() to nand/core
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
- Enable coredump support for the i.MX HiFi core remoteproc, and clean
up the i.MX remoteproc driver.
- Introduce remoteprocs on the Qualcomm Milos platform. Gracefully shut
own the ADSP remoteproc when bootloader has loaded the "Lite"
firmware on X Elite. Improve the resource handover procedure to avoid
possibly duplicate handling.
- Transition the TI DA8xx, TI Keystone, and TI Wakeup M3 remoteproc
drivers to handle resources using devres.
* tag 'rproc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (29 commits)
remoteproc: pru: Fix potential NULL pointer dereference in pru_rproc_set_ctable()
remoteproc: qcom: pas: Drop redundant assignment to ret
remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E
remoteproc: qcom: q6v5: Avoid handling handover twice
remoteproc: qcom: q6v5: Avoid disabling handover IRQ twice
remoteproc: qcom: pas: Add Milos remoteproc support
dt-bindings: remoteproc: qcom,milos-pas: Document remoteprocs
remoteproc: qcom_q6v5_mss: support loading MBN file on msm8974
remoteproc: imx_rproc: Clean up after ops introduction
remoteproc: imx_rproc: Simplify IMX_RPROC_SMC switch case
remoteproc: imx_rproc: Simplify IMX_RPROC_SCU_API switch case
remoteproc: imx_rproc: Simplify IMX_RPROC_MMIO switch case
remoteproc: imx_rproc: Move imx_rproc_dcfg closer to imx_rproc_of_match
remoteproc: imx_rproc: Introduce start/stop/detect_mode ops for imx_rproc_dcfg
remoteproc: k3: Correctly release some resources allocated in k3_rproc_request_mbox()
remoteproc: wkup_m3: Use devm_rproc_add() helper
remoteproc: wkup_m3: Use devm_rproc_alloc() helper
remoteproc: wkup_m3: Use devm action to call PM runtime put sync
remoteproc: wkup_m3: Use devm_pm_runtime_enable() helper
remoteproc: keystone: Use devm_rproc_add() helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- haptic touchpad support (Angela Czubak and Jonathan Denose)
- support for audio jack handling on DualSense Playstation controllers
(Cristian Ciocaltea)
- allow HID-BPF to rebind a driver to hid-multitouch (Benjamin
Tissoires)
- rework hidraw ioctls to make them safer (and tested) (Benjamin
Tissoires)
- various PIDFF and universal-PIDFF fixes/improvements (Tomasz Pakuła)
- better configuration of Intel QuickI2C through ACPI (Xinpeng Sun)
- other assorted cleanups and fixes
* tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (58 commits)
HID: playstation: Switch to scoped_guard() in {dualsense|dualshock4}_output_worker()
HID: playstation: Silence sparse warnings for locking context imbalances
HID: playstation: Update SP preamp gain comment line
HID: intel-thc-hid: intel-quicki2c: support ACPI config for advanced features
HID: core: Change hid_driver to use a const char* for name
HID: hidraw: tighten ioctl command parsing
selftests/hid: hidraw: forge wrong ioctls and tests them
selftests/hid: hidraw: add more coverage for hidraw ioctls
selftests/hid: update vmtest.sh for virtme-ng
HID: playstation: Support DualSense audio jack event reporting
HID: playstation: Support DualSense audio jack hotplug detection
HID: playstation: Redefine DualSense input report status field
HID: playstation: Prefer kzalloc(sizeof(*buf)...)
HID: playstation: Document spinlock_t usage
HID: playstation: Fix all alignment and line length issues
HID: playstation: Correct spelling in comment sections
HID: playstation: Replace uint{32,16,8}_t with u{32,16,8}
HID: playstation: Simplify locking with guard() and scoped_guard()
HID: playstation: Add spaces around arithmetic operators
HID: playstation: Make use of bitfield macros
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/pmf:
- Add support for adjusting PMF PPT and PPT APU thresholds
- Extend custom BIOS inputs for more policies
- Update ta_pmf_action structure to the latest PMF TA
- arm64:
- thinkpad-t14s-ec: Add EC driver for ThinkPad T14s Gen6 Snapdragon
- int3472:
- Increase handshake GPIO delay
- intel/pmc:
- SSRAM support for Lunar Lake and Panther Lake
- Support reading substate requirements data from S0ix blockers
(for platforms starting from Panther Lake)
- Wildcat Lake support
- intel-uncore-freq:
- Solve duplicate sysfs entry warnings
- Present unique domain ID per package
- portwell-ec:
- Support suspend/resume
- Add hwmon support for voltage and temperature
- redmi-wmi:
- Add WMI driver for Redmibook keyboard
- think-lmi:
- Certificate support for ThinkCenter
- x86-android-tables + others:
- Convert away from legacy GPIO APIs
- x86-android-tables:
- Add support for Acer A1-840 tablet
- Fix modules list for Lenovo devices
- Stop using EPROBE_DEFER
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (63 commits)
platform/x86: pcengines-apuv2: Use static device properties
platform/x86: meraki-mx100: Use static device properties
platform/x86: barco-p50-gpio: use software nodes for gpio-leds/keys
platform/x86: x86-android-tablets: Stop using EPROBE_DEFER
platform/x86: x86-android-tablets: Fix modules lists for Lenovo devices
platform/x86: x86-android-tablets: Simplify lenovo_yoga_tab2_830_1050_exit()
platform/x86: x86-android-tablets: Add support for Acer A1-840 tablet
platform/x86: x86-android-tablets: Move Acer info to its own file
platform/x86: x86-android-tablets: Update my email address
platform/x86: x86-android-tablets: Simplify node-group [un]registration
platform/x86: x86-android-tablets: use swnode_group instead of manual registering
platform/x86: x86-android-tablets: replace bat_swnode with swnode_group
platform/x86: x86-android-tablets: convert gpio_keys devices to GPIO references
platform/x86: x86-android-tablets: remove support for GPIO lookup tables
platform/x86: x86-android-tablets: convert Yoga Tab2 fast charger to GPIO references
platform/x86: x86-android-tablets: convert HID-I2C devices to GPIO references
platform/x86: x86-android-tablets: convert wm1502 devices to GPIO references
platform/x86: x86-android-tablets: convert int3496 devices to GPIO references
platform/x86: x86-android-tablets: convert EDT devices to GPIO references
platform/x86: x86-android-tablets: convert Novatek devices to GPIO references
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Drivers:
- Add ciphertext hiding support to ccp
- Add hashjoin, gather and UDMA data move features to hisilicon
- Add lz4 and lz77_only to hisilicon
- Add xilinx hwrng driver
- Add ti driver with ecb/cbc aes support
- Add ring buffer idle and command queue telemetry for GEN6 in qat
Others:
- Use rcu_dereference_all to stop false alarms in rhashtable
- Fix CPU number wraparound in padata"
* tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (78 commits)
dt-bindings: rng: hisi-rng: convert to DT schema
crypto: doc - Add explicit title heading to API docs
hwrng: ks-sa - fix division by zero in ks_sa_rng_init
KEYS: X.509: Fix Basic Constraints CA flag parsing
crypto: anubis - simplify return statement in anubis_mod_init
crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs
crypto: hisilicon/qm - clear all VF configurations in the hardware
crypto: hisilicon - enable error reporting again
crypto: hisilicon/qm - mask axi error before memory init
crypto: hisilicon/qm - invalidate queues in use
crypto: qat - Return pointer directly in adf_ctl_alloc_resources
crypto: aspeed - Fix dma_unmap_sg() direction
rhashtable: Use rcu_dereference_all and rcu_dereference_all_check
crypto: comp - Use same definition of context alloc and free ops
crypto: omap - convert from tasklet to BH workqueue
crypto: qat - Replace kzalloc() + copy_from_user() with memdup_user()
crypto: caam - double the entropy delay interval for retry
padata: WQ_PERCPU added to alloc_workqueue users
padata: replace use of system_unbound_wq with system_dfl_wq
crypto: cryptd - WQ_PERCPU added to alloc_workqueue users
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"The changes include adding poison injection support, fixing CXL access
coordinates when onlining CXL memory, and delaing the enumeration of
downstream switch ports for CXL hierarchy to ensure that the CXL link
is established at the time of enumeration to address a few issues
observed on AMD and Intel platforms.
Misc changes:
- Use str_plural() instead of open code for emitting strings.
- Use str_enabled_disabled() instead of ternary operator
- Fix emit of type resource_size_t argument for
validate_region_offset()
- Typo fixup in CXL driver-api documentation
- Rename CFMWS coherency restriction defines
- Add convention doc describe dealing with x86 low memory hole
and CXL
Poison Inject support:
- Move hpa_to_spa callback to new reoot decoder ops structure
- Define a SPA to HPA callback for interleave calculation with
XOR math
- Add support for SPA to DPA address translation with XOR
- Add locked variants of poison inject and clear functions
- Add inject and clear poison support by region offset
CXL access coordinates update fix:
- A comment update for hotplug memory callback prority defines
- Add node_update_perf_attrs() for updating perf attrs on a node
- Update cxl_access_coordinates() to use the new node update function
- Remove hmat_update_target_coordinates() and related code
CXL delayed downstream port enumeration and initialization:
- Add helper to detect top of CXL device topology and remove
open coding
- Add helper to delete single dport
- Add a cached copy of target_map to cxl_decoder
- Refactor decoder setup to reduce cxl_test burden
- Defer dport allocation for switch ports
- Add mock version of devm_cxl_add_dport_by_dev() for cxl_test
- Adjust the mock version of devm_cxl_switch_port_decoders_setup()
due to cxl core usage
- Setup target_map for cxl_test decoder initialization
- Change SSLBIS handler to handle single dport
- Move port register setup to when first dport appears"
* tag 'cxl-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (25 commits)
cxl: Move port register setup to when first dport appear
cxl: Change sslbis handler to only handle single dport
cxl/test: Setup target_map for cxl_test decoder initialization
cxl/test: Adjust the mock version of devm_cxl_switch_port_decoders_setup()
cxl/test: Add mock version of devm_cxl_add_dport_by_dev()
cxl: Defer dport allocation for switch ports
cxl/test: Refactor decoder setup to reduce cxl_test burden
cxl: Add a cached copy of target_map to cxl_decoder
cxl: Add helper to delete dport
cxl: Add helper to detect top of CXL device topology
cxl: Documentation/driver-api/cxl: Describe the x86 Low Memory Hole solution
cxl/acpi: Rename CFMW coherency restrictions
Documentation/driver-api: Fix typo error in cxl
acpi/hmat: Remove now unused hmat_update_target_coordinates()
cxl, acpi/hmat: Update CXL access coordinates directly instead of through HMAT
drivers/base/node: Add a helper function node_update_perf_attrs()
mm/memory_hotplug: Update comment for hotplug memory callback priorities
cxl: Fix emit of type resource_size_t argument for validate_region_offset()
cxl/region: Add inject and clear poison by region offset
cxl/core: Add locked variants of the poison inject and clear funcs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Paul McKenney:
"Documentation updates:
- Update whatisRCU.rst and checklist.rst for recent RCU API additions
- Fix RCU documentation formatting and typos
- Replace dead Ottawa Linux Symposium links in RTFP.txt
Miscellaneous RCU updates:
- Document that rcu_barrier() hurries RCU_LAZY callbacks
- Remove redundant interrupt disabling from
rcu_preempt_deferred_qs_handler()
- Move list_for_each_rcu from list.h to rculist.h, and adjust the
include directive in kernel/cgroup/dmem.c accordingly
- Make initial set of changes to accommodate upcoming
system_percpu_wq changes
SRCU updates:
- Create an srcu_read_lock_fast_notrace() for eventual use in
tracing, including adding guards
- Document the reliance on per-CPU operations as implicit RCU readers
in __srcu_read_{,un}lock_fast()
- Document the srcu_flip() function's memory-barrier D's relationship
to SRCU-fast readers
- Remove a redundant preempt_disable() and preempt_enable() pair from
srcu_gp_start_if_needed()
Torture-test updates:
- Fix jitter.sh spin time so that it actually varies as advertised.
It is still quite coarse-grained, but at least it does now vary
- Update torture.sh help text to include the not-so-new --do-normal
parameter, which permits (for example) testing KCSAN kernels
without doing non-debug kernels
- Fix a number of false-positive diagnostics that were being
triggered by rcutorture starting before boot completed. Running
multiple near-CPU-bound rcutorture processes when there is only the
boot CPU is after all a bit excessive
- Substitute kcalloc() for kzalloc()
- Remove a redundant kfree() and NULL out kfree()ed objects"
* tag 'rcu.2025.09.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (31 commits)
rcu: WQ_UNBOUND added to sync_wq workqueue
rcu: WQ_PERCPU added to alloc_workqueue users
rcu: replace use of system_wq with system_percpu_wq
refperf: Set reader_tasks to NULL after kfree()
refperf: Remove redundant kfree() after torture_stop_kthread()
srcu/tiny: Remove preempt_disable/enable() in srcu_gp_start_if_needed()
srcu: Document srcu_flip() memory-barrier D relation to SRCU-fast
srcu: Document __srcu_read_{,un}lock_fast() implicit RCU readers
rculist: move list_for_each_rcu() to where it belongs
refscale: Use kcalloc() instead of kzalloc()
rcutorture: Use kcalloc() instead of kzalloc()
docs: rcu: Replace multiple dead OLS links in RTFP.txt
doc: Fix typo in RCU's torture.rst documentation
Documentation: RCU: Retitle toctree index
Documentation: RCU: Reduce toctree depth
Documentation: RCU: Wrap kvm-remote.sh rerun snippet in literal code block
rcu: docs: Requirements.rst: Abide by conventions of kernel documentation
doc: Add RCU guards to checklist.rst
doc: Update whatisRCU.rst for recent RCU API additions
rcutorture: Delay forward-progress testing until boot completes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Paul Walmsley:
- Support for the RISC-V-standardized RPMI interface.
RPMI is a platform management communication mechanism between OSes
running on application processors, and a remote platform management
processor. Similar to ARM SCMI, TI SCI, etc. This includes irqchip,
mailbox, and clk changes.
- Support for the RISC-V-standardized MPXY SBI extension.
MPXY is a RISC-V-specific standard implementing a shared memory
mailbox between S-mode operating systems (e.g., Linux) and M-mode
firmware (e.g., OpenSBI). It is part of this PR since one of its use
cases is to enable M-mode firmware to act as a single RPMI client for
all RPMI activity on a core (including S-mode RPMI activity).
Includes a mailbox driver.
- Some ACPI-related updates to enable the use of RPMI and MPXY.
- The addition of Linux-wide memcpy_{from,to}_le32() static inline
functions, for RPMI use.
- An ACPI Kconfig change to enable boot logos on any ACPI-using
architecture (including RISC-V)
- A RISC-V defconfig change to add GPIO keyboard and event device
support, for front panel shutdown or reboot buttons
* tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (26 commits)
clk: COMMON_CLK_RPMI should depend on RISCV
ACPI: support BGRT table on RISC-V
MAINTAINERS: Add entry for RISC-V RPMI and MPXY drivers
RISC-V: Enable GPIO keyboard and event device in RV64 defconfig
irqchip/riscv-rpmi-sysmsi: Add ACPI support
mailbox/riscv-sbi-mpxy: Add ACPI support
irqchip/irq-riscv-imsic-early: Export imsic_acpi_get_fwnode()
ACPI: RISC-V: Add RPMI System MSI to GSI mapping
ACPI: RISC-V: Add support to update gsi range
ACPI: RISC-V: Create interrupt controller list in sorted order
ACPI: scan: Update honor list for RPMI System MSI
ACPI: Add support for nargs_prop in acpi_fwnode_get_reference_args()
ACPI: property: Refactor acpi_fwnode_get_reference_args() to support nargs_prop
irqchip: Add driver for the RPMI system MSI service group
dt-bindings: Add RPMI system MSI interrupt controller bindings
dt-bindings: Add RPMI system MSI message proxy bindings
clk: Add clock driver for the RISC-V RPMI clock service group
dt-bindings: clock: Add RPMI clock service controller bindings
dt-bindings: clock: Add RPMI clock service message proxy bindings
mailbox: Add RISC-V SBI message proxy (MPXY) based mailbox driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"The biggest change here is making TDX and kexec play nicely together.
Before this, the memory encryption hardware (which doesn't respect
cache coherency) could write back old cachelines on top of data in the
new kernel, so kexec and TDX were made mutually exclusive. This
removes the limitation.
There is also some work to tighten up a hardware bug workaround and
some MAINTAINERS updates.
- Make TDX and kexec work together
- Skip TDX bug workaround when the bug is not present
- Update maintainers entries"
* tag 'x86_tdx_for_6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/virt/tdx: Use precalculated TDVPR page physical address
KVM/TDX: Explicitly do WBINVD when no more TDX SEAMCALLs
x86/virt/tdx: Update the kexec section in the TDX documentation
x86/virt/tdx: Remove the !KEXEC_CORE dependency
x86/kexec: Disable kexec/kdump on platforms with TDX partial write erratum
x86/virt/tdx: Mark memory cache state incoherent when making SEAMCALL
x86/sme: Use percpu boolean to control WBINVD during kexec
x86/kexec: Consolidate relocate_kernel() function parameters
x86/tdx: Skip clearing reclaimed pages unless X86_BUG_TDX_PW_MCE is present
x86/tdx: Tidy reset_pamt functions
x86/tdx: Eliminate duplicate code in tdx_clear_page()
MAINTAINERS: Add KVM mail list to the TDX entry
MAINTAINERS: Add Rick Edgecombe as a TDX reviewer
MAINTAINERS: Update the file list in the TDX entry.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host for v6.18, part 2
rtl9300 updates:
- general cleanups
- implemented block read/write support
- added RTL9310 support
|
|
Pull kvm updates from Paolo Bonzini:
"This excludes the bulk of the x86 changes, which I will send
separately. They have two not complex but relatively unusual conflicts
so I will wait for other dust to settle.
guest_memfd:
- Add support for host userspace mapping of guest_memfd-backed memory
for VM types that do NOT use support KVM_MEMORY_ATTRIBUTE_PRIVATE
(which isn't precisely the same thing as CoCo VMs, since x86's
SEV-MEM and SEV-ES have no way to detect private vs. shared).
This lays the groundwork for removal of guest memory from the
kernel direct map, as well as for limited mmap() for
guest_memfd-backed memory.
For more information see:
- commit a6ad54137af9 ("Merge branch 'guest-memfd-mmap' into HEAD")
- guest_memfd in Firecracker:
https://github.com/firecracker-microvm/firecracker/tree/feature/secret-hiding
- direct map removal:
https://lore.kernel.org/all/20250221160728.1584559-1-roypat@amazon.co.uk/
- mmap support:
https://lore.kernel.org/all/20250328153133.3504118-1-tabba@google.com/
ARM:
- Add support for FF-A 1.2 as the secure memory conduit for pKVM,
allowing more registers to be used as part of the message payload.
- Change the way pKVM allocates its VM handles, making sure that the
privileged hypervisor is never tricked into using uninitialised
data.
- Speed up MMIO range registration by avoiding unnecessary RCU
synchronisation, which results in VMs starting much quicker.
- Add the dump of the instruction stream when panic-ing in the EL2
payload, just like the rest of the kernel has always done. This
will hopefully help debugging non-VHE setups.
- Add 52bit PA support to the stage-1 page-table walker, and make use
of it to populate the fault level reported to the guest on failing
to translate a stage-1 walk.
- Add NV support to the GICv3-on-GICv5 emulation code, ensuring
feature parity for guests, irrespective of the host platform.
- Fix some really ugly architecture problems when dealing with debug
in a nested VM. This has some bad performance impacts, but is at
least correct.
- Add enough infrastructure to be able to disable EL2 features and
give effective values to the EL2 control registers. This then
allows a bunch of features to be turned off, which helps cross-host
migration.
- Large rework of the selftest infrastructure to allow most tests to
transparently run at EL2. This is the first step towards enabling
NV testing.
- Various fixes and improvements all over the map, including one BE
fix, just in time for the removal of the feature.
LoongArch:
- Detect page table walk feature on new hardware
- Add sign extension with kernel MMIO/IOCSR emulation
- Improve in-kernel IPI emulation
- Improve in-kernel PCH-PIC emulation
- Move kvm_iocsr tracepoint out of generic code
RISC-V:
- Added SBI FWFT extension for Guest/VM with misaligned delegation
and pointer masking PMLEN features
- Added ONE_REG interface for SBI FWFT extension
- Added Zicbop and bfloat16 extensions for Guest/VM
- Enabled more common KVM selftests for RISC-V
- Added SBI v3.0 PMU enhancements in KVM and perf driver
s390:
- Improve interrupt cpu for wakeup, in particular the heuristic to
decide which vCPU to deliver a floating interrupt to.
- Clear the PTE when discarding a swapped page because of CMMA; this
bug was introduced in 6.16 when refactoring gmap code.
x86 selftests:
- Add #DE coverage in the fastops test (the only exception that's
guest- triggerable in fastop-emulated instructions).
- Fix PMU selftests errors encountered on Granite Rapids (GNR),
Sierra Forest (SRF) and Clearwater Forest (CWF).
- Minor cleanups and improvements
x86 (guest side):
- For the legacy PCI hole (memory between TOLUD and 4GiB) to UC when
overriding guest MTRR for TDX/SNP to fix an issue where ACPI
auto-mapping could map devices as WB and prevent the device drivers
from mapping their devices with UC/UC-.
- Make kvm_async_pf_task_wake() a local static helper and remove its
export.
- Use native qspinlocks when running in a VM with dedicated
vCPU=>pCPU bindings even when PV_UNHALT is unsupported.
Generic:
- Remove a redundant __GFP_NOWARN from kvm_setup_async_pf() as
__GFP_NOWARN is now included in GFP_NOWAIT.
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (178 commits)
KVM: s390: Fix to clear PTE when discarding a swapped page
KVM: arm64: selftests: Cover ID_AA64ISAR3_EL1 in set_id_regs
KVM: arm64: selftests: Remove a duplicate register listing in set_id_regs
KVM: arm64: selftests: Cope with arch silliness in EL2 selftest
KVM: arm64: selftests: Add basic test for running in VHE EL2
KVM: arm64: selftests: Enable EL2 by default
KVM: arm64: selftests: Initialize HCR_EL2
KVM: arm64: selftests: Use the vCPU attr for setting nr of PMU counters
KVM: arm64: selftests: Use hyp timer IRQs when test runs at EL2
KVM: arm64: selftests: Select SMCCC conduit based on current EL
KVM: arm64: selftests: Provide helper for getting default vCPU target
KVM: arm64: selftests: Alias EL1 registers to EL2 counterparts
KVM: arm64: selftests: Create a VGICv3 for 'default' VMs
KVM: arm64: selftests: Add unsanitised helpers for VGICv3 creation
KVM: arm64: selftests: Add helper to check for VGICv3 support
KVM: arm64: selftests: Initialize VGICv3 only once
KVM: arm64: selftests: Provide kvm_arch_vm_post_create() in library code
KVM: selftests: Add ex_str() to print human friendly name of exception vectors
selftests/kvm: remove stale TODO in xapic_state_test
KVM: selftests: Handle Intel Atom errata that leads to PMU event overcount
...
|
|
Pull VFIO updates from Alex Williamson:
- Use fdinfo to expose the sysfs path of a device represented by a vfio
device file (Alex Mastro)
- Mark vfio-fsl-mc, vfio-amba, and the reset functions for
vfio-platform for removal as these are either orphaned or believed to
be unused (Alex Williamson)
- Add reviewers for vfio-platform to save it from also being marked for
removal (Mostafa Saleh, Pranjal Shrivastava)
- VFIO selftests, including basic sanity testing and minimal userspace
drivers for testing against real hardware. This is also expected to
provide integration with KVM selftests for KVM-VFIO interfaces (David
Matlack, Josh Hilke)
- Fix drivers/cdx and vfio/cdx to build without CONFIG_GENERIC_MSI_IRQ
(Nipun Gupta)
- Fix reference leak in hisi_acc (Miaoqian Lin)
- Use consistent return for unsupported device feature (Alex Mastro)
- Unwind using the correct memory free callback in vfio/pds (Zilin
Guan)
- Use IRQ_DISABLE_LAZY flag to improve handling of pre-PCI2.3 INTx and
resolve stalled interrupt on ppc64 (Timothy Pearson)
- Enable GB300 in nvgrace-gpu vfio-pci variant driver (Tushar Dave)
- Misc:
- Drop unnecessary ternary conversion in vfio/pci (Xichao Zhao)
- Grammatical fix in nvgrace-gpu (Morduan Zang)
- Update Shameer's email address (Shameer Kolothum)
- Fix document build warning (Alex Williamson)
* tag 'vfio-v6.18-rc1' of https://github.com/awilliam/linux-vfio: (48 commits)
vfio/nvgrace-gpu: Add GB300 SKU to the devid table
vfio/pci: Fix INTx handling on legacy non-PCI 2.3 devices
vfio/pds: replace bitmap_free with vfree
vfio: return -ENOTTY for unsupported device feature
hisi_acc_vfio_pci: Fix reference leak in hisi_acc_vfio_debug_init
vfio/platform: Mark reset drivers for removal
vfio/amba: Mark for removal
MAINTAINERS: Add myself as VFIO-platform reviewer
MAINTAINERS: Add myself as VFIO-platform reviewer
docs: proc.rst: Fix VFIO Device title formatting
vfio: selftests: Fix .gitignore for already tracked files
vfio/cdx: update driver to build without CONFIG_GENERIC_MSI_IRQ
cdx: don't select CONFIG_GENERIC_MSI_IRQ
MAINTAINERS: Update Shameer Kolothum's email address
vfio: selftests: Add a script to help with running VFIO selftests
vfio: selftests: Make iommufd the default iommu_mode
vfio: selftests: Add iommufd mode
vfio: selftests: Add iommufd_compat_type1{,v2} modes
vfio: selftests: Add vfio_type1v2_mode
vfio: selftests: Replicate tests across all iommu_modes
...
|
|
interally => internally
Signed-off-by: Bhanu Seshu Kumar Valluri <bhanuseshukumar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Adjust the regex for child-node address to account for the fact that
RTL9310 supports 12 instead of only 8 SDA lines. Also, narrow this per
variant.
Add a vendor-specific property to explicitly specify the SCL line number
of the defined I2C controller/master. This is required, in particular
for RTL9310, to operate on the correct SCL for each controller. Require
this property to be specified for RTL9310.
Add compatibles for known SoC variants RTL9311, RTL9312 and RTL9313.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250927101931.71575-9-jelonek.jonas@gmail.com
|
|
Fix wording of binding description to use plural because there is not
only a single RTL9300 SoC. RTL9300 describes a whole family of Realtek
SoCs.
Add missing word 'of' in description of reg property.
Change 'SDA pin' to 'SDA line number' because the property must contain
the SDA (channel) number ranging from 0-7 instead of a real pin number.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # On RTL9302C based board
Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250927101931.71575-3-jelonek.jonas@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC build fix from Arnd Bergmann:
"One commit for the dt bindings was missing from the dt branch, this
one is already pending in the clk tree that contains the corresponding
device driver"
* tag 'soc-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
dt-bindings: clock: Add ARTPEC-8 clock controller
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, mpi3mr, lpfc, pm80xx, mpt3sas) plus
assorted cleanups and fixes.
The only core update is to sd.c and is mostly cosmetic"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (105 commits)
scsi: MAINTAINERS: Update FC element owners
scsi: mpt3sas: Update driver version to 54.100.00.00
scsi: mpt3sas: Add support for 22.5 Gbps SAS link rate
scsi: mpt3sas: Suppress unnecessary IOCLogInfo on CONFIG_INVALID_PAGE
scsi: mpt3sas: Fix crash in transport port remove by using ioc_info()
scsi: ufs: ufs-qcom: Add support for limiting HS gear and rate
scsi: ufs: pltfrm: Add DT support to limit HS gear and gear rate
scsi: ufs: ufs-qcom: Remove redundant re-assignment to hs_rate
scsi: ufs: dt-bindings: Document gear and rate limit properties
scsi: ufs: core: Fix data race in CPU latency PM QoS request handling
scsi: libfc: Fix potential buffer overflow in fc_ct_ms_fill()
scsi: storvsc: Remove redundant ternary operators
scsi: ufs: core: Change MCQ interrupt enable flow
scsi: smartpqi: Replace kmalloc() + copy_from_user() with memdup_user()
scsi: hpsa: Replace kmalloc() + copy_from_user() with memdup_user()
scsi: hpsa: Fix potential memory leak in hpsa_big_passthru_ioctl()
scsi: lpfc: Copyright updates for 14.4.0.11 patches
scsi: lpfc: Update lpfc version to 14.4.0.11
scsi: lpfc: Convert debugfs directory counts from atomic to unsigned int
scsi: lpfc: Clean up extraneous phba dentries
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- a new dm-pcache target for read/write caching on persistent memory
- fix typos in docs
- misc small refactoring
- mark dm-error with DM_TARGET_PASSES_INTEGRITY
- dm-request-based: fix NULL pointer dereference and quiesce_depth out of sync
- dm-linear: optimize REQ_PREFLUSH
- dm-vdo: return error on corrupted metadata
- dm-integrity: support asynchronous hash interface
* tag 'for-6.18/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (27 commits)
dm raid: use proper md_ro_state enumerators
dm-integrity: prefer synchronous hash interface
dm-integrity: enable asynchronous hash interface
dm-integrity: rename internal_hash
dm-integrity: add the "offset" argument
dm-integrity: allocate the recalculate buffer with kmalloc
dm-integrity: introduce integrity_kmap and integrity_kunmap
dm-integrity: replace bvec_kmap_local with kmap_local_page
dm-integrity: use internal variable for digestsize
dm vdo: return error on corrupted metadata in start_restoring_volume functions
dm vdo: Update code to use mem_is_zero
dm: optimize REQ_PREFLUSH with data when using the linear target
dm-pcache: use int type to store negative error codes
dm: fix "writen"->"written"
dm-pcache: cleanup: fix coding style report by checkpatch.pl
dm-pcache: remove ctrl_lock for pcache_cache_segment
dm: fix NULL pointer dereference in __dm_suspend()
dm: fix queue start/stop imbalance under suspend/load/resume races
dm-pcache: add persistent cache target in device-mapper
dm error: mark as DM_TARGET_PASSES_INTEGRITY
...
|
|
Pull rdma updates from Jason Gunthorpe:
"A new Pensando ionic driver, a new Gen 3 HW support for Intel irdma,
and lots of small bnxt_re improvements.
- Small bug fixes and improves to hfi1, efa, mlx5, erdma, rdmarvt,
siw
- Allow userspace access to IB service records through the rdmacm
- Optimize dma mapping for erdma
- Fix shutdown of the GSI QP in mana
- Support relaxed ordering MR and fix a corruption bug with mlx5 DMA
Data Direct
- Many improvement to bnxt_re:
- Debugging features and counters
- Improve performance of some commands
- Change flow_label reporting in completions
- Mirror vnic
- RDMA flow support
- New RDMA driver for Pensando Ethernet devices: ionic
- Gen 3 hardware support for the Intel irdma driver
- Fix rdma routing resolution with VRFs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (85 commits)
RDMA/ionic: Fix memory leak of admin q_wr
RDMA/siw: Always report immediate post SQ errors
RDMA/bnxt_re: improve clarity in ALLOC_PAGE handler
RDMA/irdma: Remove unused struct irdma_cq fields
RDMA/irdma: Fix positive vs negative error codes in irdma_post_send()
RDMA/bnxt_re: Remove non-statistics counters from hw_counters
RDMA/bnxt_re: Add debugfs info entry for device and resource information
RDMA/bnxt_re: Fix incorrect errno used in function comments
RDMA: Use %pe format specifier for error pointers
RDMA/ionic: Use ether_addr_copy instead of memcpy
RDMA/ionic: Fix build failure on SPARC due to xchg() operand size
RDMA/rxe: Fix race in do_task() when draining
IB/sa: Fix sa_local_svc_timeout_ms read race
IB/ipoib: Ignore L3 master device
RDMA/core: Use route entry flag to decide on loopback traffic
RDMA/core: Resolve MAC of next-hop device without ARP support
RDMA/core: Squash a single user static function
RDMA/irdma: Update Kconfig
RDMA/irdma: Extend CQE Error and Flush Handling for GEN3 Devices
RDMA/irdma: Add Atomic Operations support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- Refactoring of DMA mapping API to physical addresses as the primary
interface instead of page+offset parameters
This gets much closer to Matthew Wilcox's long term wish for
struct-pageless IO to cacheable DRAM and is supporting memdesc
project which seeks to substantially transform how struct page works.
An advantage of this approach is the possibility of introducing
DMA_ATTR_MMIO, which covers existing 'dma_map_resource' flow in the
common paths, what in turn lets to use recently introduced
dma_iova_link() API to map PCI P2P MMIO without creating struct page
Developped by Leon Romanovsky and Jason Gunthorpe
- Minor clean-up by Petr Tesarik and Qianfeng Rong
* tag 'dma-mapping-6.18-2025-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
kmsan: fix missed kmsan_handle_dma() signature conversion
mm/hmm: properly take MMIO path
mm/hmm: migrate to physical address-based DMA mapping API
dma-mapping: export new dma_*map_phys() interface
xen: swiotlb: Open code map_resource callback
dma-mapping: implement DMA_ATTR_MMIO for dma_(un)map_page_attrs()
kmsan: convert kmsan_handle_dma to use physical addresses
dma-mapping: convert dma_direct_*map_page to be phys_addr_t based
iommu/dma: implement DMA_ATTR_MMIO for iommu_dma_(un)map_phys()
iommu/dma: rename iommu_dma_*map_page to iommu_dma_*map_phys
dma-mapping: rename trace_dma_*map_page to trace_dma_*map_phys
dma-debug: refactor to use physical addresses for page mapping
iommu/dma: implement DMA_ATTR_MMIO for dma_iova_link().
dma-mapping: introduce new DMA attribute to indicate MMIO memory
swiotlb: Remove redundant __GFP_NOWARN
dma-direct: clean up the logic in __dma_direct_alloc_pages()
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a relatively busy cycle in docsland, with changes all
over:
- Bring the kernel memory-model docs into the Sphinx build in the
"literal include" mode.
- Lots of build-infrastructure work, further cleaning up long-term
kernel-doc technical debt. The sphinx-pre-install tool has been
converted to Python and updated for current systems.
- A new tool to detect when documents have been moved and generate
HTML redirects; this can be used on kernel.org (or any other site
hosting the rendered docs) to avoid breaking links.
- Automated processing of the YAML files describing the netlink
protocol.
- A significant update of the maintainer's PGP guide.
... and a seemingly endless series of typo fixes, build-problem fixes,
etc"
* tag 'docs-6.18' of git://git.lwn.net/linux: (193 commits)
Documentation/features: Update feature lists for 6.17-rc7
docs: remove cdomain.py
Documentation/process: submitting-patches: fix typo in "were do"
docs: dev-tools/lkmm: Fix typo of missing file extension
Documentation: trace: histogram: Convert ftrace docs cross-reference
Documentation: trace: histogram-design: Wrap introductory note in note:: directive
Documentation: trace: historgram-design: Separate sched_waking histogram section heading and the following diagram
Documentation: trace: histogram-design: Trim trailing vertices in diagram explanation text
Documentation: trace: histogram: Fix histogram trigger subsection number order
docs: driver-api: fix spelling of "buses".
Documentation: fbcon: Use admonition directives
Documentation: fbcon: Reindent 8th step of attach/detach/unload
Documentation: fbcon: Add boot options and attach/detach/unload section headings
docs: filesystems: sysfs: add remaining top level sysfs directory descriptions
docs: filesystems: sysfs: clarify symlink destinations in dev and bus/devices descriptions
docs: filesystems: sysfs: remove top level sysfs net directory
docs: maintainer: Fix ambiguous subheading formatting
docs: kdoc: a few more dump_typedef() tweaks
docs: kdoc: remove redundant comment stripping in dump_typedef()
docs: kdoc: remove some dead code in dump_typedef()
...
|
|
Remove pxx_mkdevmap() descriptions, as these helper functions have already
been dropped (including DEBUG_VM_PGTABLE test) via the commit d438d2734170
("mm: remove devmap related functions and page table bits").
Link: https://lkml.kernel.org/r/20250929120045.1109707-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Running "make htmldocs" generates the following build error
in zh_CN/cpu-freq/cpu-drivers.rst:
Documentation/translations/zh_CN/cpu-freq/cpu-drivers.rst:109: ERROR: Malformed table.
Fix the table formatting to resolve the error.
Signed-off-by: Gopi Krishna Menon <krishnagopi487@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Running "make htmldocs" generate the following build error
in zh_TW/cpu-freq/cpu-drivers.rst:
Documentation/translations/zh_TW/cpu-freq/cpu-drivers.rst:109: ERROR: Malformed table.
Fix the table formatting to resolve the error.
Signed-off-by: Gopi Krishna Menon <krishnagopi487@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"This focuses on two primary updates for Android devices.
First, it sets hash-based file name lookup as the default method to
improve performance, while retaining an option to fall back to a
linear lookup.
Second, it resolves a persistent issue with the 'checkpoint=enable'
feature.
The update further boosts performance by prefetching node blocks,
merging FUA writes more efficiently, and optimizing block allocation
policies.
The release is rounded out by a comprehensive set of bug fixes that
address memory safety, data integrity, and potential system hangs,
along with minor documentation and code clean-ups.
Enhancements:
- add mount option and sysfs entry to tune the lookup mode
- dump more information and add a timeout when enabling/disabling
checkpoints
- readahead node blocks in F2FS_GET_BLOCK_PRECACHE mode
- merge FUA command with the existing writes
- allocate HOT_DATA for IPU writes
- Use allocate_section_policy to control write priority in
multi-devices setups
- add reserved nodes for privileged users
- Add bggc_io_aware to adjust the priority of BG_GC when issuing IO
- show the list of donation files
Bug fixes:
- add missing dput() when printing the donation list
- fix UAF issue in f2fs_merge_page_bio()
- add sanity check on ei.len in __update_extent_tree_range()
- fix infinite loop in __insert_extent_tree()
- fix zero-sized extent for precache extents
- fix to mitigate overhead of f2fs_zero_post_eof_page()
- fix to avoid migrating empty section
- fix to truncate first page in error path of f2fs_truncate()
- fix to update map->m_next_extent correctly in f2fs_map_blocks()
- fix wrong layout information on 16KB page
- fix to do sanity check on node footer for non inode dnode
- fix to avoid NULL pointer dereference in
f2fs_check_quota_consistency()
- fix to detect potential corrupted nid in free_nid_list
- fix to clear unusable_cap for checkpoint=enable
- fix to zero data after EOF for compressed file correctly
- fix to avoid overflow while left shift operation
- fix condition in __allow_reserved_blocks()"
* tag 'f2fs-for-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (43 commits)
f2fs: add missing dput() when printing the donation list
f2fs: fix UAF issue in f2fs_merge_page_bio()
f2fs: readahead node blocks in F2FS_GET_BLOCK_PRECACHE mode
f2fs: add sanity check on ei.len in __update_extent_tree_range()
f2fs: fix infinite loop in __insert_extent_tree()
f2fs: fix zero-sized extent for precache extents
f2fs: fix to mitigate overhead of f2fs_zero_post_eof_page()
f2fs: fix to avoid migrating empty section
f2fs: fix to truncate first page in error path of f2fs_truncate()
f2fs: fix to update map->m_next_extent correctly in f2fs_map_blocks()
f2fs: fix wrong layout information on 16KB page
f2fs: clean up error handing of f2fs_submit_page_read()
f2fs: avoid unnecessary folio_clear_uptodate() for cleanup
f2fs: merge FUA command with the existing writes
f2fs: allocate HOT_DATA for IPU writes
f2fs: Use allocate_section_policy to control write priority in multi-devices setups
Documentation: f2fs: Reword title
Documentation: f2fs: Indent compression_mode option list
Documentation: f2fs: Wrap snippets in literal code blocks
Documentation: f2fs: Span write hint table section rows
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Extend copy_file_range interface to be fully 64bit capable (Miklos)
- Add selftest for fusectl (Chen Linxuan)
- Move fuse docs into a separate directory (Bagas Sanjaya)
- Allow fuse to enter freezable state in some cases (Sergey
Senozhatsky)
- Clean up writeback accounting after removing tmp page copies (Joanne)
- Optimize virtiofs request handling (Li RongQing)
- Add synchronous FUSE_INIT support (Miklos)
- Allow server to request prune of unused inodes (Miklos)
- Fix deadlock with AIO/sync release (Darrick)
- Add some prep patches for block/iomap support (Darrick)
- Misc fixes and cleanups
* tag 'fuse-update-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (26 commits)
fuse: move CREATE_TRACE_POINTS to a separate file
fuse: move the backing file idr and code into a new source file
fuse: enable FUSE_SYNCFS for all fuseblk servers
fuse: capture the unique id of fuse commands being sent
fuse: fix livelock in synchronous file put from fuseblk workers
mm: fix lockdep issues in writeback handling
fuse: add prune notification
fuse: remove redundant calls to fuse_copy_finish() in fuse_notify()
fuse: fix possibly missing fuse_copy_finish() call in fuse_notify()
fuse: remove FUSE_NOTIFY_CODE_MAX from <uapi/linux/fuse.h>
fuse: remove fuse_readpages_end() null mapping check
fuse: fix references to fuse.rst -> fuse/fuse.rst
fuse: allow synchronous FUSE_INIT
fuse: zero initialize inode private data
fuse: remove unused 'inode' parameter in fuse_passthrough_open
virtio_fs: fix the hash table using in virtio_fs_enqueue_req()
mm: remove BDI_CAP_WRITEBACK_ACCT
fuse: use default writeback accounting
virtio_fs: Remove redundant spinlock in virtio_fs_request_complete()
fuse: remove unneeded offset assignment when filling write pages
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull fs_context updates from Al Viro:
"Change vfs_parse_fs_string() calling conventions
Get rid of the length argument (almost all callers pass strlen() of
the string argument there), add vfs_parse_fs_qstr() for the cases that
do want separate length"
* tag 'pull-fs_context' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_nfs4_mount(): switch to vfs_parse_fs_string()
change the calling conventions for vfs_parse_fs_string()
|
|
- Fix whitespace issues (Li Jun)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
* pci/misc:
PCI/sysfs: Expose PCI device serial number
PCI/ACPI: Fix pci_acpi_preserve_config() memory leak
|
